GPX CC208S User Manual

CC208S  
INSTRUCTION MANUAL  
Contents  
Warnings and Precautions ............................................................................... 2  
Important Safety Instructions............................................................................ 3  
In the Box & Powering the Unit......................................................................... 4  
Setting the Clock & Setting the Alarm............................................................... 5  
Listening to the Radio & Listening to a CD....................................................... 5  
Location of Controls & Control Definitions................................................... 6 - 7  
Service Information........................................................................................... 8  
Important Safety Instructions  
1. Read Instructions - All the safety and  
operating instruction should be read before the  
product is operated.  
feature. If you are unable to insert the plug  
receptacles as this can result in a risk of fire or  
electric shock.  
fully into the outlet, try reversing the plug. If  
the plug should still fail to fit, contact your  
electrician to replace your obsolete outlet. Do  
not defeat the safety purpose of the polarizes  
plug.  
19. Object and Liquid Entry - Never push  
objects of any kind into this product through  
openings as they may touch dangerous voltage  
points or short-out parts that could result in a  
fire or electric shock. Never spill liquid of any  
kind on the product.  
ꢀ. Retain Instructions - The safety and  
operating instruction should be retained for  
future reference.  
Alternate Warnings - This product is  
equipped with a three-wire grounding-type  
plug, a plug having a third (grounding) pin.  
This plug will only fit into a grounding-type  
power outlet. This is a safety feature. If you  
are unable to insert the plug into the outlet,  
contact your electrician to replace your  
obsolete outlet. Do not defeat the safety  
purpose of the grounding-type plug.  
3. Heed Warnings - All warning on the product  
and in the operating instructions should be  
adhered to.  
ꢀ0. Servicing - Do not attempt to service this  
product yourself as opening or removing  
covers may expose you to dangerous voltage  
or other hazards. Refer all servicing to  
qualified service personnel.  
4. Follow instructions - All operating and use  
instructions should be followed.  
5. Cleaning - Unplug this product from the  
wall outlet before cleaning. Do not use liquid  
cleaners or aerosol cleaners. Clean only with a  
dry cloth.  
ꢀ1. Damage Requiring Service - Unplug  
this product from the wall outlet and refer  
servicing to qualified service personnel under  
the following conditions:  
13. Power-Cord Protection - Power supply cords  
should be routed so that they are not likely to  
be walked on or pinched by items placed upon  
or against them, paying particular attention to  
cords at plugs, convenience receptacles, and  
point where they exit from the product.  
6. Attachments - Do not use attachments not  
recommended by the product manufacturer as  
they may cause hazards.  
a) When the power-supply cord or plug is  
damaged,  
7. Water and Moisture - Do not use this product  
near water - for example, near a bath tub, wash  
bowl, kitchen sink, or laundry tub; in a wet  
basement, or near a swimming pool, and the  
like. The apparatus shall not be exposed to  
dripping or splashing and that no objects filled  
with liquids, such as vases, shall be placed on  
apparatus.  
b) If liquid has been spilled, or objects have  
fallen into the product,  
14. Protective Attachment Plug - The product  
is equipped with an attachment plug having  
overload protection. This is a safety feature.  
See Instruction Manual for replacement or  
resetting of protective device. If replacement  
of the plug is required, be sure the service  
technician has used a replacement plug  
c) If the product has been exposed to rain or  
water,  
d) If the product does not operate normally  
by following the operating instructions.  
Adjust only those controls that are covered  
by the operating instructions as an improper  
adjustment of other controls may result in  
damage and will often require extensive work  
by a qualified technician to restore the product  
to its normal operation.  
8. Accessories - Do not place this product on  
an unstable cart, stand tripod, bracket, or  
table. The product may fall, causing serious  
injury to a child or adult, and serious damage  
to the product. Use only with a cart, stand,  
tripod, bracket, or table recommended by the  
manufacturer, or sold with the product. Any  
mounting of the product should follow the  
manufacturer’s instructions, and should use  
a mounting accessory recommended by the  
manufacturer.  
specified by the manufacturer that has the  
same overload protection as the original plug.  
15. Outdoor Antenna Grounding - If an  
outside antenna is connected to the receiver,  
be sure the antenna system is grounded  
so as to provide some protection against  
voltage surges and built-up static charges.  
Article 810 of the National Electrical Code,  
ANSI/NFPA 70, provides information with  
regard to proper grounding of the mast and  
supporting structure, grounding of the mast  
and supporting structure, grounding of the  
lead-in wire to an antenna-discharge unit, size  
of grounding conductors, location of antenna-  
discharge unit, connection to grounding  
electrodes, and requirements for the grounding  
electrode.  
e) If the product has been dropped or  
damaged in any way, and  
f) When the product exhibits a distinct change  
in performance - this indicates a need for  
service.  
ꢀꢀ. Replacement Parts - When replacement parts  
are required, be sure the service technician  
has used replacement parts specified by the  
manufacturer or have the same characteristics  
as the original part. Unauthorized substitutions  
may result in fire, electric shock, or other  
hazards.  
9. A product and cart combination should be  
moved with care. Quick stops, excessive force,  
and uneven surfaces may cause the appliance  
and cart combination to overturn.  
See figure:  
See figure:  
ꢀ3. Safety Check - Upon completion of any  
service or repairs to this product, ask the  
service technician to perform safety checks  
to determine that the product is in proper  
operating condition.  
ꢀ4. Wall or Ceiling Mounting - The product  
should be mounted to a wall or ceiling only as  
recommended by the manufacturer.  
10. Ventilation - Slots and openings in the cabinet  
are provided for ventilation and to ensure  
reliable operation of the product and to protect  
it from overheating, and these openings must  
not be blocked or covered. The openings  
should never be blocked by placing the  
product on a bed, sofa, rug, or other similar  
surface. This product should not be placed in a  
built-in installation such as a bookcase or rack  
unless proper ventilation is provided or the  
manufacturer’s instruction have been adhered  
to.  
ꢀ5. Heat - The product should be situated away  
from heat sources such as radiators, heat  
registers, stoves, or other products (including  
amplifiers) that produce heat. Battery shall not  
be exposed to excessive heat such as sunshine,  
fire, or the like.  
16. Lightning - For added protection for this  
product during a lightning storm, or when it  
is left unattended and unused for long periods  
of time, unplug it from the wall outlet and  
disconnect the antenna or cable system. This  
will prevent damage to the product due to  
lightning and power-line surges.  
ꢀ6. Main plug is used as disconnect device and  
it should remain readily operable during  
intended use. In order to disconnect the  
apparatus from the mains completely, the  
mains plug should be disconnected from the  
mains socket outlet completely.  
11. Power Sources - This product should be  
operated only from the type of power source  
indicated on the marking label. If you are not  
sure of the type of power supply to your home,  
consult your product dealer or local power  
company. For products intended to operate  
from battery power, or other sources, refer to  
the operating instruction.  
17. Power Lines - An outside antenna system  
should not be located in the vicinity of  
overhead power lines or other electric light or  
power circuits, or where it can fall into such  
power lines or circuits. When installing an  
outside antenna system, extreme care should  
be taken to keep from touching such power  
lines or circuits as contact with them might be  
fatal.  
ꢀ7. Excessive sound pressure from earphones and  
headphones can cause hearing loss.  
1ꢀ. Grounding or Polarization - This product  
may be equipped with a polarized alternating-  
current line plug (a plug having one blade  
wider than the other). This plug will fit into  
the power outlet only one way. This is a safety  
18. Overloading - Do not overload wall outlets,  
extension cords, or integral convenience  
3
In the Box  
CCꢀ08S  
Documentation  
Powering the Unit  
Power the unit by connecting it to a standard AC outlet (1ꢀ0V ~ 60Hz)  
via the attached AC cord.  
AC 1ꢀ0V / 60Hz  
4
Setting the Clock  
1. Press and hold the Clk Set Button.  
ꢀ. While holding the Clk Set Button, press the Skip/Search/Hour/Minute Buttons  
to adjust the hour and minute.  
3. Release the Clk Set Button to set the time.  
Setting the Alarm  
1. Press and hold the Alm Set Button.  
ꢀ. While holding the Alm Set Button , press the Skip/Search/Hour/Minute Buttons  
to adjust the hour and minute for the alarm time.  
3. Release the Alm Set Button to set the time.  
4. Adjust the Auto/Off/On Button to Auto.  
5. Adjust the AM/FM/CD Switch to the desired function for the alarm, or reduce the  
Volume Dial to “Buzz” to wake to the unit’s buzzer.  
Listening to the Radio  
1. Adjust the Auto/Off/On Button to the on position.  
ꢀ. Adjust the AM/FM/CD Button to AM or FM ST.  
3. Turn the Tuning Dial to adjust the AM or FM radio station.  
4. Turn the Volume Dial to adjust the volume of the radio.  
Listening to a CD  
1. Pull open the CD door, load a CD into the unit with the label facing up. Close the  
CD door.  
ꢀ. Adjust the Auto/Off/On Button to the on position.  
3. Adjust the AM/FM/CD Button to the CD position.  
4. Press the Play/Pause Button to begin playing a loaded CD.  
5
Location of Controls  
7
8
9
10  
11  
1
1ꢀ  
3
4
13  
14  
15  
16  
5
6
17  
6
Control Definitions  
1
Stop Button  
Press the Stop Button to stop a CD during play.  
2
Skip/Search/Hour/Minute Buttons  
Press the Skip/Search/Hour/Minute Buttons to skip through tracks on a loaded CD when in CD mode.  
Press and hold the Skip/Search/Hour/Minute Buttons to search through individual tracks on a loaded CD  
when in CD mode.  
Press the Skip/Search/Hour/Minute Buttons to set the hour and minute when setting the time and alarm  
time.  
3
4
5
6
7
8
9
Play/Pause Button  
Press the Play/Pause Button to play or pause a loaded CD.  
Snooze Button  
Press the Snooze Button to delay the alarm for an additional 10 minutes after the alarm has sounded.  
Tuning Dial  
Turn the Tuning Dial to adjust the AM and FM radio station when in radio mode.  
AM/FM/CD Switch  
Adjust the AM/FM/CD Switch to switch between AM, FM, and CD mode.  
Repeat Button  
Press the Repeat Button consecutively to repeat an entire CD or an individual track from a loaded CD.  
Random Button  
Press the Random Button to play tracks from a loaded CD in a random order.  
Clk Set Button  
Press the Clk Set Button to set the time. (See “Setting the Clock” in the operations)  
10 Alm Set  
Press the Alm Set Button to set the alarm. (See “Setting the Alarm” in the operations)  
11 FM St.  
The FM Stereo indicator will illuminate when the radio is in FM Stereo mode.  
12 Radio Station Display  
The Radio Station Display shows the AM or FM radio station.  
13 Sleep Button  
Press the Skip/Search/Hour/Minute Button to set the hour and minute after.  
Press and hold the Sleep Button to set the sleep timer. (The unit must be set to Auto mode for the sleep  
timer to work.)  
14 Volume/Buzz Dial  
Turn the Volume Dial to adjust the volume output from the unit.  
Turn the Volume Dial all the way to “Buzz” to sound the buzzer when the alarm sounds  
15 Auto/Off/On Button  
Adjust the Auto/Off/On Button to turn the unit off and on, or set the unit to Auto when setting the alarm.  
16 Dimmer Switch  
Use the Dimmer Switch to adjust the brightness of the LCD display.  
17 Battery Backup (Requires a 9-Volt Battery, Not Included)  
Use the Battery Backup to save the time and alarm times in case of a power outage.  
7
Service Information  
Address ꢀ116 Carr Street, St. Louis MO, 63106  
Phone  
Fax  
Email  
1-314-6ꢀ1-ꢀ881  
1-314-588-1805  
To download this Instruction Man- Para descargar este manual de Pour télécharger ce manuel  
ual in English, Spanish, or French instrucción en inglés, español, o d’instruction en anglais, espagnol,  
visit the Support section at  
francés visite la sección de la ayu- ou le Français visitez la section de  
©
(
ꢀ007 Digital Products International DPI, Inc.) All trademarks appearing herein are the property of their respective owners. All products  
subject to change without notice.  

Motorola StarTAc 7760 User Manual
JVC KD LH811 User Manual
HTC Touch HD User Manual
Fujitsu Computer Drive MPC3043AT User Manual
Franklin Computer Accessories NCC 100 User Manual
Echo Bear Cat SC5540 70554 User Manual
DeLonghi BCO70 User Manual
Country Home Products C123E CHP User Manual
AMCC 3WARE 720 0138 00 User Manual
Aleratec 1_21 Copy Cruiser Usb Flash Drive Duplicator 330104 User Manual