Dell™ PowerEdge™ 64xx Systems
Memory Installation Update
This document updates information contained in your Dell PowerEdge system documentation.
Updating the System BIOS Before Installing
Additional Memory
Before you install the memory in this upgrade kit, you must update the basic input/output system
(BIOS) installed on your system to version A05 or later. Your system will not boot properly if this mem-
ory is used with an earlier version of the system BIOS.
To update the system BIOS, download the latest version from the Dell PowerEdge 6400 or
For information on installing the additional memory, see “Installing System Board Options” in your
system’s Installation and Troubleshooting Guide.
____________________
Information in this document is subject to change without notice.
© 2000 Dell Computer Corporation. All rights reserved. Printed in Malaysia.
Trademarks used in this text: Dell, the DELL E COM logo, and PowerEdge are trademarks of Dell Computer
Corporation. Other trademarks and trade names may be used in this document to refer to either the entities
claiming the marks and names or their products. Dell Computer Corporation disclaims any proprietary interest in
trademarks and trade names other than its own.
ꢀꢁꢂꢃꢄꢅꢆꢂꢇꢃ ꢈꢉꢊꢃꢋꢅꢄ
ꢌꢈꢍꢎꢈꢏꢐꢈꢑꢃꢒꢅꢅꢅ
support.dell.com
ꢀꢁꢀꢂꢃꢄꢅꢆꢀꢁ
|