2
Package Contents
PRO-Gear XP-14
External USB 2.0 Cable x 1 - Connects XP-14 to open USB port in your computer.
To Reader Unit
To open USB port in your computer
3
Installation
Windows 98SE or Windows 2000 users:
Driver installation is required. Please perform software setup first before using
the PRO-Gear XP-14.
Simply plug the USB cable into the back of the XP-14 and plug the other end
to any open USB port of your computer.
This is a USB 2.0 device and it is backward compatible with USB 1.1 interface.
However, USB 1.1 performance can only be expected when connected to
a USB 1.1. port.
When the unit is connected to a USB 1.1 port, the following Windows message may appear:
"A HI-SPEED USB device is plugged into a non-HI-SPEED USB hub.
For assistance in solving this problem, click this message"
Please ignore the message.
4
Install software driver
This step is required for Windows 98SE / 2000 users only. If you have Windows ME / XP,
please skip this step and proceed ahead.
(1) Close all applications that are running, including applications running in the background.
(2) Insert AFT Setup CD into CD-ROM drive and locate setup.exe file in PC setup folder.
(3) Double click on setup.exe will lead you into setup program.
(4) Follow setup instruction on your screen.
(5) After driver files are copied into your system, setup program will prompt you to restart
your computer. Please do so.
(6) Once computer is restarted, you can proceed to next step.
AFT Custom Icons (for Windows XP/ME/2000/98SE)
To use the AFT Custom Icons, you need to do the previous driver installation.
An example: Insert Memory Card and click on the Icon that matches your memory card.
5
Using XP-14
Using XP-14 is similar to using a floppy drive. Simply insert your media card into
the slot and click on the appropriate Removable Disk icon in My Computer,
it will allow you to access your media card like a disk.
PRO-Gear XP-14
SD/miniSD
CF/MD
xD/SM
MMC/RS-MMC
MS/PRO
MG/DUO
We strongly recommend that you copy the files in the media card to your computer
first before attempting to view or make any changes to the files.
Caution !!
When removing your flash media card from reader please make sure that your file
transferring process is fully completed before pulling your media card out. Failing to do
so may result in card damage or data corruption.
Avoid formatting your media cards in reader if possible.
Always format your media card in the electronic device it is used in.
Certain electronic devices may become incompatible with the media cards formatted
under Windows file systems.
6
Specifications
4.27 inch x .81 inch x 2.89 inch / 108 mm x 21 mm x 73 mm
Dimension (W x H x D):
5V DC, 500mA (USB bus power)
Power Requirement:
Compact Flash™ Type I, Compact Flash™ Type II
Microdrive™
Supported media format:
Smart Media™ (3.3V)
MultiMediaCard™
RS-MultiMediaCard™
Mini-Secure Digital™
Secure Digital™
Memory Stick™, Memory Stick™ Duo
Memory Stick™ PRO, Memory Stick™ PRO Duo
MagicGate Memory Stick™*
xD-Picture Card™**
<200mA
<500uA
Operation Current:
Suspend Current:
Up to 480 Mbps (via USB 2.0)
Up to 12 Mbps (via USB 1.1)
Transfer rate:
Windows XP, ME
Supported O/S:
Windows 98 SE , 2000 (driver required)
Mac OS 9.1 or later
Specifications are subject to change without further notice.
All trademarks, trade names and copyrights are properties of their respective owners.
*Does not operate with MagicGate Memory Stick in secure mode.
**xD-Picture Card™ is a trademark owned by Fuji Photo Film Co., Ltd.
7
Limited Warranty
Atech Flash Technology, Inc. ("AFT"), warrants to the original end user ("Customer")
that under normal intended use AFT memory flash card readers will be free from defects
in materials and workmanship for one (1) year from the date of purchase. During warranty
period, AFT shall either repair, or replace defective product. AFT shall not be liable for
any losses or damages of any kind resulting from the use of AFT products or for any of
Customer's data stored on products returned to AFT for service. AFT accepts no liability
for and provides no expressed or implied warranty against any loss of data or images.
of purchase and obtain warranty service authorization from AFT within the applicable
warranty period before returning defective products to AFT. Returned products must be
shipped prepaid and packaged appropriately, and it is recommended that they be insured
or sent by a method that provides for tracking of the package.
Limitations: This limited warranty is in lieu of all other warranties, terms or conditions;
including warranties, terms, or conditions of merchantability, fitness for a particular
purpose, satisfactory quality, suppliers, and in no event will AFT be liable for any special,
incidental, consequential, or indirect damages resulting from the possession, use or
failure of this product. Product names mentioned herein are for identification purposes only
and may be trademarked and/or registered trademarks of their respective companies.
Media Cards* Compatibility Note
Media cards may not work properly when working with AFT product. If you encounter
this problem, contact AFT Tech Support for compatible media card list and potential driver
support and updates.
|