Alkaline Battery Charger RGD-CT505
Alkaline Battery Charger RGD-CT505
A) Brief Introduction
User Manual
◎ Welcome to join our environment protection project. Together, we can make a difference in
reducing the volume of wasted batteries and helping our earth.
◎『Alkaline Battery Charger』is applicable to charge used Alkaline / NiMH batteries.
◎『Alkaline Battery Charger』 has obtained the patent authorization in Taiwan, China, Japan,
USA, Germany and Australia, with patent applications in other major markets in progress.
◎ Please read through and follow the instructions before using the product. We offer one-year
warranty under your normal use. Free repair service will be provided within the one year of
warranty period.
◎ Exceptional situations: the one-year warranty is NOT applicable to the following situations –
—Mis-use of 『Alkaline Battery Charger』: For example, the product is damaged by the leak
of batteries chemical substances due to the use of the product to charge used batteries
that are broken, damaged, rusted, or not active for a long period of time.
—Damages to or malfunction of the product are caused by natural disasters, such as fire,
earthquakes, typhoons or hurricanes, floods, lightening, abnormal voltage, and damages
made by mice and insects, or storage in improper environment/surroundings.
—Damages or malfunctioning is caused by the following situations, such as that the product
is dropped, soaked, scratched after purchase.
—Damages or malfunctioning is caused by the following situations, such as the product is
disassembled, modified, maintained, or repaired by any unauthorized parties.
B) Functions and Features
◎ Applicable to AA and AAA Alkaline / NiMH batteries (2700mAH max rated capacity of each
battery that can be charged ).
◎ Individual charge circuit for each battery to be charged (Single Battery Charge is compatible),
and it is able to charge up to Four Batteries at the same time.
◎ Easy LED indicators.
◎ Micro-processor chip controlled system to automatically detect charge process and
temperature to prevent over charging.
◎ Safety charging timer（4-hour automatic cut-off）.
◎ Automatic cut-off system after charging completes.
◎ Automatic cut-off system when batteries fall off.
◎ Automatic cut-off system against overheat.
◎ Fool-proof against misplacement of batteries in wrong poles.
◎ Universal voltage range : AC100V-240V
1
Alkaline Battery Charger RGD-CT505
User Manual
D) The Definition of LED Indicator
◎
◎
◎
Power on : LED indicator shows green light.
Charging mode : LED indicator shows red light.
Charging completed mode : LED indicator will flash Green and Rd light for five times by
turns, then LED indicator status is green.
◎
New batteries and fully charged batteries : LED indicator will flash in green light for five
times and then enter the standby mode.
◎
◎
Low voltage batteries below default setting or aged Batteries : LED indicator shows off
The LED indicator shows off or steady green when old or damaged batteries inserted to
the charger. In this case the charger won’t charge the damaged batteries, so please
remove the batteries from the charger and dispose of at your nearest recycling
point/center.
◎
◎
Batteries fall off (insert incorrect) : LED light flashes one time and turns off.
Overheat : LED indicator Green and Red light flashes by turns.
E) Caution
◎
◎
◎
Please read through and follow the instruction and caution.
Alkaline Battery Charger is applicable to charge used Alkaline and NiMH batteries
DO NOT charge used Carbon-Zinc/NiCd Batteries or Old batteries that are not in use for
long time. This could result in overheat of batteries or leak of chemical substances and in
turn damages to the charger. The one-year warranty is not applicable to the above
situation.
◎
It is recommended to use the charger with quality alkaline batteries which are newly
produced and discharged. DO NOT charges the giveaway batteries of lower quality that
usually comes along with electronic devices.
◎
◎
Alkaline battery doesn’t have the memory function. So it’s recommended for used
alkaline batteries with a longer charging time than use time for a better effect.
It is recommended to charge used NiMH batteries twice consecutively (or around 8 hours)
before use for a better effect.
◎
◎
DO NOT charge the deformed, damaged, rusted or leaked batteries with the charger.
Make sure the charger is in the standby mode before charging any used batteries to
prevent insufficient charging time. Otherwise, the problem can be solved by turning on
the power again.
◎
◎
Low voltage batteries below default setting or aged Batteries : LED indicator shows off or
steady green when old or damaged batteries inserted to the charger. In this case the
charger won’t charge the damaged batteries, so please remove the batteries from the
charger and dispose of at your nearest recycling point/center.
It’s recommended to store used batteries in containers, to avoid mixing batteries altogether,
and prevent contact between negative and positive poles of batteries.
3
Alkaline Battery Charger RGD-CT505
User Manual
◎
The charger is applicable for charging indoors. Please keep it away from extreme
temperatures and direct exposure to sunlight, rains and snows.
DO NOT smash the charger or place heavy objects on the charger.
DO NOT disassemble the charger for fear of a short circuit.
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
◎
◎
◎
◎
◎
Children should be supervised by an adult to ensure that they do not play with the
appliance.
The color of product maybe differ from the picture of website, and it’s subject to practical
products.
F) Product Specification
Model No.
RGD-CT505
AC100-240V
T1A/250Vac
DC1.7V*4
Input voltage
Fuse Rating
Output voltage
Maximum output current
Dimension (L*W*H)
350mA*4
118*71*30 (mm)
Thank you for purchasing a quality Rosewill Product.
your product.
4
|