BEFOREYO
Before using this product, read the Important Safety and
Take a moment before you get started to fam
Bluetooth Handsfree Headset. Along with yo
both charging and storage.
Charging
Speaker
Contacts
(on reverse
side)
Volume
Buttons
motorola
H680
Power
Switch
Microphone
Quick Start Guide
Indicator
Light
Call
Button
CHARGE
OU BEGIN
d Legal Information pamphlet and follow its instructions.
1
Your Headset's Battery
Important:Your headset must be turned off
when charging. If you turned the headset on,
see “Turning Headset On and Off” on reverse
side for details on turning headset off.
miliarize yourself with your new H680
our headset, a charger case is provided for
Plug the Motorola charger into the port on the
charger case.
1
2
Charger
Cover
Charging
Contacts
Place headset into charger case ensuring that
charging contacts on the headset and charging
case connect.
Charging
Contacts
Charger
Port
The indicator light turns red when the battery is
charging. It may take up to 1 minute for the
indicator light to turn on. When the headset's
battery is fully charged (about 2.5 hours), the
indicator light turns off.
Disconnect the charger.
START HERE >
3
TEST AND USE
USING YOUR H680
4
See
Your phone and headset are now paired and
ready to make and receive calls.
Features and
Functions Guide
on the reverse side
for information on
using your H680
To make a call:
Place the headset over your ear. See
"Wearing the Headset" on the reverse side
of this guide.
1
On the phone, dial the number you want to
call and press SEND key on your phone.
2
If your phone and headset are successfully
paired, you will hear ringing on the headset.
After you have successfully paired your
phone and headset, you don't need to
repeat these steps. For daily use, ensure
that your headset is turned ON and that
your phone's Bluetooth feature is ON.
TROUBLES SHOOTING
My headset worked before but now it's not
My headset will not charge.
working.
Make sure your headset is turned off when
charging.Your headset will not charge in the
charger case while powered on.
Make sure your phone is on and the Bluetooth
feature is turned on in your phone (see step 2).
If the Bluetooth feature was turned off or was
turned on only temporarily, you may need to
restart the Bluetooth feature (see step 2) and
pair your phone and headset again (see step 3).
My headset will not enter pairing mode.
Make sure that any devices previously paired
with the headset are turned off. If the indicator
light is not steadily lit in blue, turn off both the
other device and headset, wait 10 seconds, then
turn headset back on. Wait for the indicator light
to become steadily lit in blue, indicating the
headset is now in pairing mode.
Support.
If you need more help, contact us at
1-877-MOTOBLU or visit us at
My phone doesn't find my headset.
Make sure the indicator light on your headset is
on (lit in blue) and steady when your phone is
searching for devices (see step 3).
TURNING HEADSET ON
AND OFF
Features and
Functions Guide
To turn your headset on, slide the Power
switch on (towards Power symbol on
headset).The indicator light is steadily
purple for several seconds, then flashes
blue (if paired and connected with another
device) or is steadily blue (if ready to be
paired).
To turn your headset off, slide the Power
switch off.The indicator light will turn off.
IMPORTANT:
Be sure to first follow the
Quick Start Guide
on the reverse side
of this guide
to complete initial setup
of your H680.
Indicator
Light
Power
Switch
WEARINGTHE
HEADSET
To wear your headset, flex the earhook and
loop it over your ear as shown.
EARBUDS AND YOUR
HEADSET
Your H680 headset is supplied with multiple
earbuds.The earbud is fitted onto the end of
your headset’s earpiece speaker, and placed
onto your ear when using your headset.
Your headset’s performance is greatly
dependent upon achieving a good fit on your
ear. Therefore, we recommend trying all the
supplied earbuds with your headset.
Be sure to position the ear bud into your ear
canal for optimal audio performance and
comfort.
CHANGING FOR USE
ON OTHER EAR
You can wear your H680 headset on your left or
right ear.The headset comes ready for the right
ear.To change the headset for the left ear:
STORINGYOUR
HEADSET
The charger case provided is used to charge
and store your headset. When not using your
headset, you should place it in the charger
base. Be sure to turn the headset off before
placing it into the charger case.
Gently lift and pull the
top of the earhook up
and off speaker stem as
shown.
1
As shown, the charger cover can be placed on
top of the charger case, or underneath it to
provide support for desktop placement.
Flip the headset over.
2
3
Attach the earhook to
the speaker stem as
shown.
MAKING CALLS
European Union Directives Conformance
Statement
Function
Action
Hereby, Motorola declares that
this product is in compliance with:
Receive a call
Tap the Call button
Mute or unmute a call
Tap both Volume
buttons
• The essential requirements and
other relevant provisions of Directive
1999/5/EC.
Reject a call
Press and hold a
Volume button until
you hear two
• All other relevant EU Directives.
descending tones
End a call
Tap the Call button
Product
Approval
Number
Redial last call
Press and hold the
Call button until you
hear two ascending
tones
The above gives an example of a typical Product
Approval Number.
You can view your product’s Declaration of Conformity
(DoC) to Directive 1999/5/EC (to R&TTE Directive) at
product Approval Number from your product’s label in
the “Search” bar on the web site.
Make a voice dial call
Tap the Call button
and speak the
name after the tone
Note:Your H680 supports both Handsfree and Headset
Profiles. Accessing call functions depends upon which
profile your phone supports. See your phone's user's guide
for more information.
INDICATOR LIGHTS
MAKING CALLS CONTINUED
With the Charger Plugged In
Headset Indicator
Steady red
Off
Headset Status
Charging
Charging complete
Function
Action
Answer a second
incoming call
Tap the Call button
Disable the
indicator light
First slide the switch
toward charging plug
(to turn headset off),
then press and hold
both Volume
With No Charger Plugged In
Headset Indicator
Off
Headset Status
Power off
Steady purple
Powering up
buttons AND slide
the switch towards
the microphone (to
turn headset on)
Steady blue
Pairing/connection
mode
Connection successful
Standby (not on call)
Incoming call
10 rapid purple flashes
Slow blue flash
Quick blue flash
Slow blue pulse
Note: Some features are phone/network dependent.
Connected (on a call)
Slow purple pulse
Connected
(on a muted call)
Red flash
Idle (not connected)
Quick red flash
Low battery
Note: After 30 minutes of inactivity, the light stops flashing to
conserve power, but the headset remains in standby mode.
AUDIOTONES
AudioTone
Ring tone
Headset Status
Incoming call
Single high tone
Phone network not
available
High to low tone
End call
Single high tone when
pressing volume button
Volume at minimum
or maximum
Two ascending tones
Two descending tones
Low to high tone
Mute enabled
Mute disabled
Connection
confirmation/voice
activation
No audio indications;
deteriorating quality
Out of range
Two tones
repeated every 30 sec.
Low battery
|