Radio / CD
Calgary CD30
Santa Monica CD30
Operating instructions
3
5
1
2
6
7
8
10
4
14
12
11
13
9
3
CONTROLS
1
button to unlock release
panel
2
FM button, selects the FM
memory bank
3
4
Volume control knob
ON button, switches the unit
on/off
Mute
5
6
TS button, starts the Travelstore
function
AM button, selects the AM
waveband
7
8
CD slot
CD eject
CD•C button, switches sound
source between radio, CD and
CD changer (if connected)
9
AUDIO button, adjusts bass and
treble
LD button, switches the loud-
ness function on/off
:
;
Cursor block
GEO button, adjusts balance
and fader
<
MENU button, accesses the
menus for making basic settings
=
>
1 to 5 station buttons
button, indicates the time in
the display
4
CONTENTS
Important information .............. 6 CD changer operation............ 14
Traffic safety ................................... 6 Starting CD changer operation..... 14
Installation ...................................... 6 Selecting CDs.............................. 14
Accessories ................................... 6 Selecting tracks ........................... 14
Guarantee ...................................... 6 Switching the display mode.......... 14
International telephone
Repeating individual tracks or
information...................................... 6 entire CDs (REPEAT) ................... 14
Playing tracks in random order
(MIX) ............................................ 14
Scanning all of the tracks on all
of the CDs (SCAN) ...................... 15
Adjusting the scan time ................ 15
Interrupting playback (PAUSE) ..... 15
Theft protection system ........... 7
Removable front panel.................... 7
Switching the car audio system
on/off ....................................... 8
Volume control ......................... 8
Adjusting the power-on volume ...... 8
Mute ............................................... 9
Telephone mute .............................. 9
How to the confirmation tone
Clock ...................................... 16
Time display .................................. 16
Setting the time ............................ 16
Selecting the 12/24-hour time
display mode................................. 16
Activating the clock display for
switch on/off .................................. 9
Radio operation...................... 10
Switching to the radio mode......... 10
Selecting wavebands/memory
the car audio system when it is
switched off ................................. 16
banks ............................................ 10
Tuning into radio stations .............. 10
Adjusting seek tuning sensitivity... 10
Storing radio stations.................... 10
Storing radio stations automatically
(Travelstore).................................. 11
Recalling stored radio stations ..... 11
Tuner switchover .......................... 11
Adjusting the tone.................. 17
Adjusting the bass ........................ 17
Adjusting the treble ...................... 17
Switching Loudness on/off .......... 17
Adjusting the volume
distribution ............................. 17
Adjusting the balance ................... 17
Adjusting the fader ....................... 17
CD mode ................................ 12
Switching to CD mode ................. 12
Selecting a track .......................... 12
Random play (MIX) ....................... 12
External audio sources .......... 18
Switching the AUX output on/off . 18
Specifications ........................ 18
Scanning tracks (SCAN).............. 12 Amplifier ....................................... 18
Setting the scantime..................... 12 Tuner ............................................ 18
Repeating a track (REPEAT) ........ 13 CD................................................ 18
Pausing playback (PAUSE) .......... 13
Changing the display .................... 13
Ejecting a CD ............................... 13
Installation instructions.......... 65
5
IMPORTANT INFORMATION
Important information
Amplifiers
All Blaupunkt amplifiers can be used.
Before you use your car audio system
for the first time, please take the time to
read the instruction manual carefully
and make yourself familiar with the au-
dio equipment. Keep this manual handy
in your car for future reference.
CD changers
The following CD changers can be con-
nected directly: CDC A 06, CDC A 08,
CDC A 072 and IDC A 09.
The CDC A 05 and CDC A 071 can be
connected with an adapter cable (Blau-
punkt no. 7 607 889 093).
Traffic safety
Traffic safety is always the top
priority. Do not operate your car au-
dio system unless the traffic condi-
tions permit. Familiarize yourself with
the equipment before you start driv-
ing.
Always make sure that you are still
able to hear any warning signals
coming from outside the vehicle,
such as police or fire engine sirens,
at all times. Consequently, you
should always select a moderate
volume for playing your car audio
system while you are driving.
Guarantee
The scope of the guarantee is deter-
mined by the laws in the country where
the unit is purchased.
Regardless of the legal guarantee reg-
ulations, Blaupunkt affords a 12-month
guarantee.
If you have any questions about the
guarantee, please contact your author-
ized Blaupunkt dealer. Your cash regis-
ter receipt is a valid guarantee coupon.
International telephone
information
Have you got any questions on the op-
eration of this equipment or do you re-
quire more information?
Installation
If you would like to install your new car
stereo yourself or add other audio com-
ponents to the existing ones, then
please read the instructions on installa-
tion and connection at the end of this
manual carefully.
Give us a call!
You will find the international telephone
and fax numbers on the last page of this
manual.
Accessories
Use only Blaupunkt-approved accesso-
ries.
Remote control unit
The optionally available RC 08 infrared
remote control unit allows you to con-
veniently operate the most important
system functions from the steering
wheel.
6
THEFT PROTECTION SYSTEM
Theft protection system
1
Removable front panel
To prevent your car audio system from
being stolen, it has been equipped with
a removable front panel (release pan-
el). Without the front panel, the car au-
dio system is useless to thieves.
Protect your car audio system against
theft and take the operating panel with
you each time you leave the vehicle.
Never leave the release panel in the car,
even when it is well hidden. The panel
has been designed so that it is easy to
remove.
● First pull the operating panel
forward and then slide it to the left
to remove it.
● When you remove the operating
panel, the car audio system will
automatically switch off.
● All of the settings will remain
stored.
Notes:
● A CD inserted into the car audio
● Do not drop the release panel.
system will remain in place.
● Do not expose the release panel to
direct sunlight or other heat
sources.
Replacing the operating panel
● Slide the operating panel into the
● Protect the panel from exposure to
guides from left to right.
moisture.
● Press the left-hand side of the
panel onto the car audio system
until it locks into place.
● Store the release panel in the case
supplied.
● If the car audio system was on
when you removed the panel, it will
automatically switch back on using
the same settings when you
replace it (radio, CD or CD chang-
er).
Removing the operating panel
Note:
● Press
The release panel will unlock.
1.
● While replacing the panel, be
careful not to press on the display.
7
SWITCHING ON/OFF
VOLUME CONTROL
Switching the car audio
system on/off
The car audio system can be switched
on/off in a number of ways.
Volume control
The car audio system volume can be
adjusted to levels from 0 (off) to 66 (max-
imum).
● To increase the volume, turn the
volume control knob 3 to the
right.
● Switching the car audio system on/
off with the vehicle ignition.
If the car audio system has been con-
nected to your vehicle ignition, it is pos- ● To decrease the volume, turn the
sible to switch it on and off with the igni-
tion.
volume control knob 3 to the left.
Adjusting the power-on volume
It is possible to adjust the volume at
which the car audio system switches on.
You can also switch the car audio sys-
tem on when the ignition is switched off.
● Press down and hold 4 until the
● Press MENU <.
car audio system switches on.
● Press
VOL” appears in the display.
● Press : to adjust the
volume.
: repeatedly until “ON
Note:
To prevent the car battery from running
down, the radio will switch off again au-
tomatically after one hour.
To make it easier to select the desired
volume, you will be able to hear any
changes made while you are adjusting
the volume.
● Switching the car audio system on/
off with the removable front panel
● Remove the release panel.
The car audio system will switch off.
● Replace the release panel.
If you adjust this setting to 0, the car
audio system will switch on at the vol-
ume used before it was switched off.
The car audio system will switch on
again. The last settings used (radio, CD
or CD changer) will be activated.
Warning of serious injury
When the power-on volume is set to
the maximum level, it may be ex-
tremely loud when the car audio sys-
tem is switched on.
When the power-on volume is set to
0 and the car audio system was
played at maximum volume before it
was switched off, it may be extreme-
ly loud when the car audio system is
switched back on. This could result
in serious injury to your ears.
● Switching the car audio system on/
off by pressing 4.
● Press 4 to switch the car audio
system on.
● Press 4 for longer than 2 seconds
to switch the car audio system off
again.
8
VOLUME CONTROL
● Once you have selected the
How to the confirmation tone
switch on/off
desired settings, press MENU <.
If you hold down a key for longer than
two seconds, e.g. in order to save a sta-
tion on one of the station keys, a confir-
mation tone will sound (beep). This beep
is adjustable:
Mute
You can reduce the volume of the car
audio system immediately (mute).
● Press 4.
● Press the MENU key <.
Selecting the mute level
It is possible to select the mute level.
● Press MENU <.
● Press the key : repeatedly
until “BEEP ON” or “BEEP OFF”
appears on the display.
● Press : repeatedly until
“MUTE LVL” appears in the
display.
● Switch the beep on or off using the
keys :.
● Once you have completed the
setting, press the MENU key <
once more.
● Press
: to select the mute
level.
● Once you have made your selec-
tion, press MENU <.
Telephone mute
If your car audio system has been
equipped with a mobile telephone, it will
automatically switch to mute when you
use the phone. This will not work un-
less the mobile phone is connected to
the car audio system as described in
the installation instructions.
The car audio system will be muted to
the mute level selected.
9
RADIO OPERATION
Radio operation
Adjusting seek tuning sensitivity
It is also possible to adjust the sensi-
tivity of the seek tuning function. In this
way you can adjust the radio to tune into
stations with strong reception signals
only, or to those with weaker reception
signals as well.
Switching to the radio mode
If you are currently using the CD player
or CD changer,
● press CD•C 8 repeatedly until
“RADIO” appears in the display.
● Press MENU <.
Selecting wavebands/memory
banks
● Press : repeatedly until
“SENS” appears in the display.
Using this car audio system, you can
tune into radio stations on the FM and
AM wavebands. There are three mem-
ory banks for the FM waveband and one
memory bank forAM. You can store five
stations in each of these memory banks.
● Press :.
The currently selected setting will ap-
pear in the display. “SENS HI” indicates
the highest level of sensitivity, “SENS
LO” the lowest. If you select “SENS LO”,
lo will light up in the display.
Selecting FM
● Press
sensitivity.
: to adjust the desired
● To switch between the FM wave-
bands FM1, FM2 and FMT, press
FM 2.
● Once you have made your selec-
tion, press MENU <.
Selecting AM
Manual station tuning
● To switch between the AM wave-
band, press AM 6.
You can also tune into radio stations
manually.
Tuning into radio stations
You can tune into radio stations in a
number of different ways.
● Press or :.
Storing radio stations
Storing radio stations manually
Automatic seek tuning
● Press or :.
The radio will tune into the next availa-
ble station within reception range.
● Select the desired FM memory
bank FM1, FM2, FMT or the AM
waveband.
● Tune into the radio station you
would like to store.
10
RADIO OPERATION
● Press and hold down one of the
station preset buttons 1 to 5 = on
which you want to store the radio
station for longer than one second.
Tuner switchover
The car audio system has been
equipped with a multi-band tuner. The
tuner can be adjusted to accommodate
different requirements in different coun-
tries. The following regions can be se-
lected:America, Europe,Asia and Thai-
land. The tuner will not be completely
functional until it has been adjusted to
the country in which it is being used.
Storing radio stations
automatically (Travelstore)
You can automatically store the five ra-
dio stations with the strongest reception
in the area. These stations will be stored
in the FMT or AM memory bank, de-
pending on which waveband you have
selected.
Switching over the tuner
● Press MENU <.
Note:
● Press : repeatedly until “FM
Any stations stored previously in the
memory bank will be deleted.
TUNER” appears in the display.
● Press
: to select the country.
● Press TS 5 briefly.
● Once you have made your selec-
The storing process will begin. “T-
STORE” will appear in the display.After
the stations have been stored, the ra-
dio will automatically begin to play the
station stored on preset button 1 for the
corresponding memory bank.
tion, press MENU <.
Recalling stored radio stations
● Select the desired station memory
bank or the waveband.
● Press the station button 1 to 5 =
on which you have stored the
desired radio station.
11
CD MODE
CD mode
Random play (MIX)
You can use this unit to play standard ● Press button 4 (MIX) =.
CDs with a diameter of 12 cm.
“MIX CD” will appear briefly in the dis-
play, MIX will light up in the display. The
next randomly selected track will then
be played.
Risk of damage to CD drive!
So-called “CD singles” with a diam-
eter of 8 cm and contoured CDs
(“shape CDs”) are not suitable for
playback in this unit.
We accept no liability for any dam-
age to the CD drive that may occur
as a result of the use of unsuitable
CDs.
Stopping MIX
● Press button 4 (MIX) = again.
“MIX OFF” appears briefly in the dis-
play and MIX no longer lights up.
Scanning tracks (SCAN)
You can briefly play all the tracks on a
CD.
Switching to CD mode
● If no CD is inserted in the drive.
● Gently insert the CD with the
printed side uppermost into the CD
compartment until you feel some
resistance.
● Press button 5 (SCAN) =.
Note:
You can set the scanning time.
Stopping SCAN and continuing
playback
The CD will be drawn automatically into
the drive.
Do not use force when inserting the CD.
You must not hinder or assist the drive
as it draws the CD in. Once inserted,
CD playback begins immediately.
● To stop scanning, press button
5 (SCAN) = again.
The current track will then continue to
be played.
● If a CD is already inserted in the
drive.
Setting the scantime
● Press the CD•C button 8 until
● Press the MENU button <.
“MENU” appears in the display.
“CD” appears in the display.
Playback begins from the point at which
it was last interrupted.
● Keep pressing the button :
until “SCANTIME” appears in the
display.
Selecting a track
● Set the required scantime using
● Press the or button : to
the and buttons :.
select the next or previous track.
● When you have finished making
your changes, press the MENU
button <.
If the button : is pressed once, the
current track will be heard again from
the beginning.
12
CD MODE
Repeating a track (REPEAT)
Ejecting a CD
To remove a CD from the unit:
● If you want to repeat a track, press
button 3 (RPT) =.
● Press the CD•C button 8 until the
RPT appears in the display. The track
is repeated until you deactivate RPT.
CD is ejected.
You must not hinder or assist the drive
while it is ejecting the CD.
Stopping REPEAT
● If you want to stop the repeat
function, press button 3 (RPT) =
again.
RPT disappears. Normal playback is
then continued.
Pausing playback (PAUSE)
● Press button 2 ( ) =.
“PAUSE” appears in the display.
Cancelling pause
● Press button 2 ( ) = while in
pause mode.
Playback is continued.
Changing the display
To change the display between track
number and playing time:
● Press the MENU button <.
“MENU” appears in the display.
● Keep pressing the button :
until “CD DISP” appears in the
display.
● Press the button :.
The current setting is displayed.
“TIME” stands for the playing time and
“PLAY” for the track number display.
● Selected the required setting using
the or button :.
● Press the MENU button <.
13
CD CHANGER OPERATION
CD changer operation
● Press or : to select the
desired setting.
Note:
● Press MENU <.
Refer to the instructions included with
the CD changer for more information on
how to handle CDs, how to insert CDs
into the changer and how to operate the
changer.
Repeating individual tracks or
entire CDs (REPEAT)
● To repeat the track currently
playing, press 3 (RPT) = briefly.
Starting CD changer operation
“RPT TRCK” will appear briefly in the
display, RPT will light up in the display.
● Press CD•C 8 repeatedly until
“CHANGER” appears in the
display.
● To repeat the entire CD currently
playing, press 3 (RPT) = again.
Playback will begin with the first CD the
changer detects in the magazine.
“RPT DISC” will appear briefly in the
display, RPT will light up in the display.
Selecting CDs
Stopping the REPEAT function
● To select a different CD up or
down, press or : once or
the required number of times.
● To stop the REPEAT function for
the current track or CD, press
3 (RPT) = repeatedly until “RPT
OFF” appears in the display and
RPT no longer lights up.
Selecting tracks
● To select a different track up or
down on the CD currently playing,
press or : once or the
required number of times.
Playing tracks in random order
(MIX)
● To play the tracks of the currently
selected CD in random order,
press 4 (MIX) = briefly.
Switching the display mode
To switch the display between the CD
number and the elapsed playing time,
“MIX CD” will appear briefly in the dis-
play, MIX will light up in the display.
● press MENU <.
● To play the tracks of all of the CDs
in random order, press 4 (MIX) =
again.
“MENU” will appear in the display.
● Press : repeatedly until “CDC
DISP” appears in the display.
“MIX ALL” will appear briefly in the dis-
play, MIX will light up in the display.
● Press :.
The current setting will be shown in the
display. “TIME” stands for elapsed play-
ing time and “CD NO” for the display of
the CD number.
14
CD CHANGER OPERATION
Note:
● Once you have made your selec-
The CDC A 08/ IDC A ß9 is able to play
all of the CDs in the changer in random
order. The other CD changers first play
all of the tracks on a CD in random or-
der and then select the next CD in the
changer.
tion, press MENU <.
Interrupting playback (PAUSE)
● Press 2 ( ) =.
“PAUSE” will appear in the display.
Stopping PAUSE
Stopping the MIX function
● Press 2 ( ) = during the pause.
Playback will resume.
● To stop the MIX function, press
4 (MIX) = repeatedly until “MIX
OFF” appears in the display and
MIX no longer lights up.
Scanning all of the tracks on all
of the CDs (SCAN)
● To scan all of the tracks on all of
the CDs in ascending order, press
5 (SCAN) =.
“SCAN” will appear in the display.
Stopping the SCAN function
● To stop the SCAN function, press
5 (SCAN) = again briefly.
The track currently scanned will contin-
ue playing.
Note:
It is possible to adjust the scan time.
Adjusting the scan time
● Press MENU <.
“MENU” will appear in the display.
● Press : repeatedly until
“SCANTIME” appears in the
display.
● Press
as desired.
: to set the scan time
15
CLOCK
Activating the clock display for
the car audio system when it is
switched off
CLOCK
Time display
● To display the time briefly, press
● To activate the clock display for the
car audio system when it is
>.
switched off, press MENU <.
Setting the time
“MENU” will appear in the display.
● To set the time, press MENU <.
● Press : repeatedly until
“CLOCK OFF” or “CLOCK ON”
appears in the display.
● Press : repeatedly until
“CLOCKSET” appears in the
display.
● Press or : to switch the
● Press :.
The time will appear in the display. The
minutes will flash and can be altered.
clock display on or off.
● Once you have made the setting,
press MENU <.
● Press
: to alter the minutes.
● Once you have altered the minutes,
press :. The hours will begin to
flash.
● Press
: to alter the hours.
● Once you have set the time, press
MENU <.
Selecting the 12/24-hour time
display mode
● Press MENU <.
“MENU” will appear in the display.
● Press : repeatedly until “24 H
MODE” or “12 H MODE” appears
in the display.
● Press or : to switch the
display mode.
● Once you have selected the mode,
press MENU <.
16
TONE
VOLUME DISTRIBUTION
(BALANCE/FADER)
Adjusting the tone
Adjusting the volume
distribution
Adjusting the bass
Adjusting the balance
● To adjust the bass, press AUDIO 9.
“BASS” will appear in the display.
● Press or : to alter the bass.
● To adjust the balance, press GEO
;.
“BAL” will appear in the display.
Adjusting the treble
● Press or : to alter the
balance between the left and right
speakers.
● To adjust the treble, press AUDIO
9.
“BASS” will appear in the display.
Adjusting the fader
● Press AUDIO 9 again.
“TREBLE” will appear in the display.
● Press or : to alter the treble.
● To adjust the fader, press GEO ;.
“BAL” will appear in the display.
● Press GEO ; again.
Switching Loudness on/off
“FADER” will appear in the display.
Loudness boosts the bass and treble
when the volume is low to create a more
natural sound.
● Press or : to alter the fader
for the front and rear speakers.
● Press AUDIO 9 for approx. two
seconds.
LD will light up in the display when Loud-
ness is active.
Adjusting Loudness intensity
The Loudness boost can be set in stag-
es from one to six.
● Press MENU <.
● Press : repeatedly until
“LOUDNESS” appears in the
display.
● Press or : to alter the
Loudness setting.
● Once you have completed adjust-
ing the settings, press MENU <.
17
EXTERNAL AUDIO
SOURCES
SPECIFICATIONS
External audio sources
Specifications
In place of the CD changer it is also
possible to connect other external au-
dio sources to the line output. These
sources can include a portable CD play-
er, MiniDisc player or MP3 player.
If you would like to connect another ex-
ternal audio source, you will require a
Blaupunkt adapter cable with the Blau-
punkt no.: 7 607 897 093.
Amplifier
Output power:
4 x 25 watts sinus
acc. to DIN 45
324 at 14.4 V
4 x 40 watts max.
power
Tuner
Wavebands:
FM :
You must activate theAUX output in the
menu.
87.5 – 107.9 MHz
530 – 1710 kHz
AM :
Switching the AUX output on/off
● Press MENU <.
“MENU” will appear in the display.
FM frequency response:
20 - 16 000 Hz
● Press : repeatedly until “AUX
OFF” or “AUX ON” appears in the
display.
CD
Transmission range:
● Press or : to switch AUX on
20 - 20 000 Hz
or off.
● Once you have completed your
selections, press MENU <.
Note:
You can then press CD•C 8 to select
the AUX output.
Subject to technical modification!
18
Service numbers / Numéros du service après-vente /
Números de servicio / Número de serviço
Tel.:
Fax:
Deutschland
Belgique / België
France
Nederland
Great Britain
Danmark
Sverige
0 18 05 00 02 25
0 25 25 54 44
014 010 70 07
023 565 63 48
018 958 383 66
44 89 83 60
0 51 21 49 40 02
0 25 25 54 48
014 010 73 20
023 565 63 31
018 958 383 94
44 89 86 44
08 750 15 00
66 81 70 00
08 750 18 10
66 81 71 57
Norge
Suomi
Österreich
094 359 91
01-6 10 39-0
015 762 241
094 359 92 36
01-6 10 39-391
015 769 473
âeská republika
USA
Singapore
Slovensko
026 130 04 41
800-266 25 28
006 535 054 47
042 175 873 212
026 130 05 14
708-681 71 88
006 535 053 12
042 175 873 229
Blaupunkt-Werke GmbH
Bosch Gruppe
02/2000 TRO
K7/VKD 8 622 402 207
|