Xantrex Technology Welding System 808 9002 01 User Manual

975-0569-01-01 Revision A April 2010  
Direct returns may be performed according to the Xantrex Return  
Material Authorization Policy described in your product manual.  
For some products, Xantrex maintains a network of regional  
Authorized Service Centers. Call Xantrex or check our website to  
see if your product can be repaired at one of these facilities.  
What proof of purchase is required? In any warranty claim,  
dated proof of purchase must accompany the product and the  
product must not have been disassembled or modified without  
prior written authorization by Xantrex.  
NEGLIGENCE, AND ALL LOSSES OR DAMAGES TO ANY  
PROPERTY OR FOR ANY PERSONAL INJURY OR  
ECONOMIC LOSS OR DAMAGE CAUSED BY THE  
CONNECTION OF A PRODUCT TO ANY OTHER DEVICE  
OR SYSTEM; AND (c) ANY DAMAGE OR INJURY ARISING  
FROM OR AS A RESULT OF MISUSE OR ABUSE, OR THE  
INCORRECT INSTALLATION, INTEGRATION OR  
OPERATION OF THE PRODUCT BY PERSONS NOT  
AUTHORIZED BY XANTREX.  
Startup and Test  
Introduction  
Features  
To Start up and Test the Freedom Remote Panel:  
The Freedom Remote Panel (remote panel) can be  
connected to the Freedom SW Inverter via the Remote  
port on the AC/DC side panel to turn the Freedom SW  
Inverter ON or OFF from a more convenient location.  
The remote panel also has the ability to enable/disable  
the Ignition Lockout feature of the Freedom SW  
Inverter. When this feature is enabled, the Freedom  
SW Inverter will shutdown if the vehicle's ignition is  
not engaged (not in ACC position) to prevent  
unnecessary battery drain.  
Mounting holes  
1. Turn the inverter ON using the Freedom unit’s  
Inverter Enable ON switch button on its front panel.  
2. Verify the POWER indicator light on the unit and the  
status indicator light on the remote are ON.  
3. Press the ON/OFF button on the remote panel to turn  
the inverter OFF.  
Status  
Indicator  
Light  
Proof of purchase may be in any one of the following forms:  
Exclusions  
The dated purchase receipt from the original purchase of  
the product at point of sale to the end user; or  
The dated dealer invoice or purchase receipt showing  
original equipment manufacturer (OEM) status; or  
The dated invoice or purchase receipt showing the  
product exchanged under warranty.  
If this product is a consumer product, federal law does not allow  
an exclusion of implied warranties. To the extent you are entitled  
to implied warranties under federal law, to the extent permitted by  
applicable law they are limited to the duration of this Limited  
Warranty. Some states, provinces and jurisdictions do not allow  
limitations or exclusions on implied warranties or on the duration  
of an implied warranty or on the limitation or exclusion of  
incidental or consequential damages, so the above limitation(s) or  
exclusion(s) may not apply to you. This Limited Warranty gives  
you specific legal rights. You may have other rights which may  
vary from state to state, province to province or jurisdiction to  
jurisdiction.  
4. Press the ON/OFF button again to restore power.  
Operation  
ON/OFF  
Button  
The Freedom Remote Panel (PN:808-9002-01) comes  
with a 25-ft (7.6-m) communications cable.  
When the remote panel is used with the Freedom SW  
Inverter/Charger the status indicator light will display  
the following:  
What does this warranty not cover? Claims are limited to  
repair and replacement, or if in Xantrex's discretion that is not  
possible, reimbursement up to the purchase price paid for the  
product. Xantrex will be liable to you only for direct damages  
suffered by you and only up to a maximum amount equal to the  
purchase price of the product.  
This Limited Warranty does not warrant uninterrupted or error-  
free operation of the product or cover normal wear and tear of the  
product or costs related to the removal, installation, or  
troubleshooting of the customer's electrical systems. This  
warranty does not apply to and Xantrex will not be responsible for  
any defect in or damage to:  
a) the product if it has been misused, neglected, improperly  
installed, physically damaged or altered, either internally or  
externally, or damaged from improper use or use in an  
unsuitable environment;  
b) the product if it has been subjected to fire, water, generalized  
corrosion, biological infestations, or input voltage that cre-  
ates operating conditions beyond the maximum or minimum  
limits listed in the Xantrex product specifications including  
but not limited to high input voltage from generators and  
lightning strikes;  
c) the product if repairs have been done to it other than by  
Xantrex or its authorized service centers (hereafter "ASCs");  
d) the product if it is used as a component part of a product  
expressly warranted by another manufacturer;  
e) component parts or monitoring systems supplied by you or  
purchased by Xantrex at your direction for incorporation into  
the product;  
f) the product if its original identification (trade-mark, serial  
number) markings have been defaced, altered, or removed;  
g) the product if it is located outside of the country where it was  
purchased; and  
h) any consequential losses that are attributable to the product  
losing power whether by product malfunction, installation  
error or misuse.  
Solid (green light is on): Normal operation. This  
Important Safety Information  
means the inverter is enabled/on.  
Misusing or incorrectly connecting the remote panel  
may damage the equipment or create hazardous  
conditions for users. Read the following safety  
instructions and pay special attention to all Caution and  
Warning statements in your Freedom SW Inverter  
Owner’s Guide.  
None (green light is off): It means the inverter is  
disabled/off.  
To test the Ignition Lockout feature (when enabled):  
1. Turn your vehicle’s ignition switch to the ACC  
position. Consult your vehicle’s Owner’s Manual for  
information.  
Mounting holes  
Return Material Authorization Policy  
Mounting the Freedom Remote Panel  
Mount the remote panel in a clean, dry environment.  
To install the remote panel:  
1. Choose a location that is dry, free from corrosive or  
explosive fumes, and appropriate for installing an  
electronic device.  
2. Using the mounting template (provided), pilot-drill  
the mounting holes. Cut an opening about 2×1.2 in.  
(50.8×30.5 mm) and 1.4 in. (35 mm) deep.  
3. Route the communications cable inside the wall and  
through the opening to the Freedom unit.  
For those products that are not being repaired in the field and are  
being returned to Xantrex, before returning a product directly to  
Xantrex you must obtain a Return Material Authorization (RMA)  
number and the correct factory "Ship To" address. Products must  
also be shipped prepaid. Product shipments will be refused and  
returned at your expense if they are unauthorized, returned  
without an RMA number clearly marked on the outside of the  
shipping box, if they are shipped collect, or if they are shipped to  
the wrong location.  
Warnings  
2. Proceed with the “Startup and Test” procedure  
1. All electrical work must be done in accordance with  
local, national, and/or international electrical codes.  
2. All electrical work must be done by a qualified  
installer.  
above.  
Note: If the vehicle’s ignition switch is OFF or if the red  
ACC wire is not connected properly, the inverter will  
not turn ON even after performing the “Startup and  
Test” procedure above.  
When you contact Xantrex to obtain service, please have your  
instruction manual ready for reference and be prepared to supply:  
3. Before installing or using the remote panel, read all  
instructions and cautionary markings located in the  
manual, on the Freedom unit, and on the batteries.  
4. Do not expose the remote panel to rain, snow or  
liquids of any type. This product is designed for  
indoor mounting only.  
5. Use insulated tools to reduce the chance of short-  
circuits when installing or working with the inverter/  
charger, or the batteries.  
6. Remove all jewelry such as rings, bracelets,  
necklaces, etc., while installing this system. This  
will greatly reduce the chance of accidental exposure  
to live circuits.  
7. The Freedom SW Inverter/Charger contains more  
than one live circuit (batteries and AC power).  
Power may be present at more than one source.  
8. The remote panel contains no user-serviceable parts.  
Do not attempt to repair this unit.  
The serial number of your product  
Warranty  
Information about the installation and use of the unit  
Information about the failure and/or reason for the return  
A copy of your dated proof of purchase  
What does this warranty cover and how long does it last?  
This Limited Warranty is provided by Xantrex Technology Inc.  
("Xantrex") and covers defects in workmanship and materials in  
your Freedom Remote Panel. This warranty period lasts for 2  
years from the date of purchase at the point of sale to you, the  
original end user customer, unless otherwise agreed in writing (the  
“Warranty Period”). You will be required to demonstrate proof of  
purchase to make warranty claims.  
4. Connect the communications cable to the RJ11 Com  
Port on the back of the remote panel.  
Return Procedure  
5. Select whether to enable or disable the Ignition  
Lockout feature using the Ignition Lockout switch.  
Package the unit safely, preferably using the original box and  
packing materials. Please ensure that your product is shipped fully  
insured in the original packaging or equivalent. This warranty will  
not apply where the product is damaged due to improper  
packaging.  
RJ11 com.port  
This Limited Warranty is transferable to subsequent owners but  
only for the unexpired portion of the Warranty Period. Subsequent  
owners also require original proof of purchase as described in  
"What proof of purchase is required?"  
What will Xantrex do? During the Warranty Period Xantrex  
will, at its option, repair the product (if economically feasible) or  
replace the defective product free of charge, provided that you  
notify Xantrex of the product defect within the Warranty Period,  
and provided that Xantrex through inspection establishes the  
existence of such a defect and that it is covered by this Limited  
Warranty.  
Xantrex will, at its option, use new and/or reconditioned parts in  
performing warranty repair and building replacement products.  
Xantrex reserves the right to use parts or products of original or  
improved design in the repair or replacement. If Xantrex repairs or  
replaces a product, its warranty continues for the remaining  
portion of the original Warranty Period or 90 days from the date of  
the return shipment to the customer, whichever is greater. All  
replaced products and all parts removed from repaired products  
become the property of Xantrex.  
Xantrex covers both parts and labor necessary to repair the  
product, and return shipment to the customer via a Xantrex-  
selected non-expedited surface freight within the contiguous  
United States and Canada. Alaska, Hawaii and outside of the  
United States and Canada are excluded. Contact Xantrex  
Customer Service for details on freight policy for return shipments  
from excluded areas.  
Ignition lockout  
switch  
Include the following:  
The RMA number supplied by Xantrex Technology Inc.  
clearly marked on the outside of the box.  
A return address where the unit can be shipped. Post  
office boxes are not acceptable.  
red ACC wire  
(12 volts only)  
A contact telephone number where you can be reached  
during work hours.  
A brief description of the problem.  
Disclaimer  
Product  
Ship the unit prepaid to the address provided by your Xantrex  
customer service representative.  
6. If you enable the Ignition Lockout feature, connect  
the remote’s red ACC wire to the vehicle’s ACC  
wire (12-volt connection only). Consult your  
vehicle’s Owner’s Manual for information.  
7. Position the remote into the opening in the wall and  
secure it with the four screws (provided).  
THIS LIMITED WARRANTY IS THE SOLE AND  
Failure to follow these safety guidelines may cause  
personal injury and/or damage to the remote panel. It  
may also void your product warranty.  
If you are returning a product from outside of the USA or  
Canada In addition to the above, you MUST include return  
freight funds and are fully responsible for all documents, duties,  
tariffs, and deposits.  
If you are returning a product to a Xantrex Authorized  
Service Center (ASC) A Xantrex return material authorization  
(RMA) number is not required. However, you must contact the  
ASC prior to returning the product or presenting the unit to verify  
any return procedures that may apply to that particular facility and  
that the ASC repairs this particular Xantrex product.  
EXCLUSIVE WARRANTY PROVIDED BY XANTREX IN  
CONNECTION WITH YOUR XANTREX PRODUCT AND IS,  
WHERE PERMITTED BY LAW, IN LIEU OF ALL OTHER  
WARRANTIES, CONDITIONS, GUARANTEES,  
REPRESENTATIONS, OBLIGATIONS AND LIABILITIES,  
EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE IN  
CONNECTION WITH THE PRODUCT, HOWEVER ARISING  
(WHETHER BY CONTRACT, TORT, NEGLIGENCE,  
PRINCIPLES OF MANUFACTURER'S LIABILITY,  
OPERATION OF LAW, CONDUCT, STATEMENT OR  
OTHERWISE), INCLUDING WITHOUT RESTRICTION ANY  
IMPLIED WARRANTY OR CONDITION OF QUALITY,  
MERCHANTABILITY OR FITNESS FOR A PARTICULAR  
PURPOSE. ANY IMPLIED WARRANTY OF  
MERCHANTABILITY OR FITNESS FOR A PARTICULAR  
PURPOSE TO THE EXTENT REQUIRED UNDER  
APPLICABLE LAW TO APPLY TO THE PRODUCT SHALL  
BE LIMITED IN DURATION TO THE PERIOD STIPULATED  
UNDER THIS LIMITED WARRANTY.  
IN NO EVENT WILL XANTREX BE LIABLE FOR: (a) ANY  
SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL  
DAMAGES, INCLUDING LOST PROFITS, LOST  
REVENUES, FAILURE TO REALIZE EXPECTED SAVINGS,  
OR OTHER COMMERCIAL OR ECONOMIC LOSSES OF  
ANY KIND, EVEN IF XANTREX HAS BEEN ADVISED, OR  
HAD REASON TO KNOW, OF THE POSSIBILITY OF SUCH  
DAMAGE; (b) ANY LIABILITY ARISING IN TORT,  
WHETHER OR NOT ARISING OUT OF XANTREX'S  
8. Make sure to switch the inverter OFF.  
Specifications  
9. Plug the communications cable into the remote port  
Note: Specifications are subject to change without  
(REM) on the Freedom unit.  
notice.  
Remote port  
Out of Warranty Service  
WARNING: INCORRECT BATTERY  
Operating Temp 0 to 50 °C (32 °F to 122 °F)  
If the warranty period for your product has expired, if the unit was  
damaged by misuse or incorrect installation, if other conditions of  
the warranty have not been met, or if no dated proof of purchase is  
available, your unit may be serviced or replaced for a flat fee.  
To return your product for out of warranty service, contact  
Xantrex Customer Service for a Return Material Authorization  
(RMA) number and follow the other steps outlined in "Return  
Procedure".  
Dimensions  
(W×H×D)  
2 × 2.5 × 1.38 in.  
REM  
BTS  
(50.8 × 63.5 × 35.2 mm)  
Weight  
0.125 lb. (0.05 kg)  
How do you get service? If your product requires  
troubleshooting or warranty service, contact your merchant. If you  
are unable to contact your merchant, or the merchant is unable to  
provide service, contact Xantrex directly at:  
Payment options such as credit card or money order will be  
explained by the Customer Service Representative. In cases where  
the minimum flat fee does not apply, as with incomplete units or  
units with excessive damage, an additional fee will be charged. If  
applicable, you will be contacted by Customer Service once your  
unit has been received.  
Phone: 1 800 670 0707 (toll free North America)  
1 408 987 6030 (direct)  
Email:  
Web:  
Xantrex and Smart choice for power are trademarks of Schneider Electric, registered in the U.S. and other countries. Other trademarks, registered trademarks, and product names are the property of their respective owners and are used herein for identification purposes only. Freedom SW Remote Panel Installation and Operation Guide © April 2010 Xantrex Technology Inc. All rights reserved. UNLESS SPECIFICALLY  
AGREED TO IN WRITING, XANTREX TECHNOLOGY INC. (“XANTREX”): (A) MAKES NO WARRANTY AS TO THE ACCURACY, SUFFICIENCY OR SUITABILITY OF ANY TECHNICAL OR OTHER INFORMATION PROVIDED IN ITS MANUALS OR OTHER DOCUMENTATION; (B) ASSUMES NO RESPONSIBILITY OR LIABILITY FOR LOSSES, DAMAGES, COSTS OR EXPENSES, WHETHER SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR INCIDENTAL, WHICH MIGHT ARISE OUT OF THE USE OF SUCH INFORMATION. THE  
USE OF ANY SUCH INFORMATION WILL BE ENTIRELY AT THE USERS RISK; AND (C) REMINDS YOU THAT IF THIS MANUAL IS IN ANY LANGUAGE OTHER THAN ENGLISH, ALTHOUGH STEPS HAVE BEEN TAKEN TO MAINTAIN THE ACCURACY OF THE TRANSLATION, THE ACCURACY CANNOT BE GUARANTEED. APPROVED XANTREX CONTENT IS CONTAINED WITH THE ENGLISH LANGUAGE VERSION WHICH IS POSTED AT WWW.XANTREX.COM.  
 

Westcott Camera Accessories 1893 User Manual
Whirlpool Computer Monitor ED2FHAXS User Manual
Whirlpool Dishwasher 2656 User Manual
Whirlpool Refrigerator W8TYNWFW User Manual
White Rodgers Thermostat F145 1328 User Manual
WiLife Home Security System Video Security System User Manual
Wolf Electric Pressure Cooker BPCR0075 User Manual
X Micro Tech Computer Drive USB20 Flash Stick User Manual
Zanussi Refrigerator 113167 User Manual
Zanussi Washer ZT 1012 User Manual