Westinghouse Computer Monitor L2610NW User Manual

USER’S MANUAL  
MANUEL DE LUTILISATEUR  
MANUAL DEL USUARIO  
L2610NW  
Monitor  
Moniteur  
 
IMPORTANT PRODUCT SAFETY INSTRUCTIONS  
Follow and obey all warnings and instructions marked on the LCD Monitor. For your safety, please read all the  
safety and operating instructions before you operate the LCD Monitor Keep this user’s manual for future  
reference.  
Overloading  
Do not overload wall outlets, extension cords, or power strips. This can result in fire or electronic shock.  
Power Cord Protection  
Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon  
or against them. Periodically inspect the cords and each end of the cords for damage. The LCD Monitor shall be  
installed near a wall socket outlet and the plug on power cord shall be readily accessible.  
Ventilation  
Slots and openings on the cabinet are provided for ventilation purposes. To ensure reliable operation of the LCD  
Monitor and to protect it from overheating, these openings must not be blocked or covered.  
Do not block the openings by placing the LCD Monitor on a bed, sofa, rug or other similar surface.  
Do not place the LCD Monitor in a built-in installation such as a bookcase or rack unless proper  
ventilation is provided and the manufacturer’s instruction have been adhered to.  
Other Notices  
Avoid exposing the LCD Monitor to direct sunlight or high temperatures.  
Avoid exposing the LCD Monitor to moisture or high humidity.  
Do not attempt repairs yourself. Your warranty does not cover repairs or attempted repairs by anyone  
not authorized by Westinghouse Digital Electronics.  
If your LCD Monitor will not be used for a long period of time, unplug the LCD Monitor.  
Precautions  
Avoid touching the screen. Skin oils are difficult to remove.  
Never remove the rear cover. Your LCD Monitor contains high-voltage parts. You may be seriously  
injured if you touch them.  
Avoid exposing your LCD Monitor to direct sunlight or another heat source. Orient your LCD Monitor  
away from direct sunlight to reduce glare.  
Always handle your LCD display with care when moving it.  
Place your LCD Monitor in a well-ventilated area; don’t place the LCD Monitor in airtight compartments.  
Do not place anything on your LCD Monitor that prevents heat dissipation.  
Ensure that the area around the LCD Monitor is clean and free of moisture.  
Do not place heavy objects on the LCD Monitor, video cables, or power cord.  
If the LCD Monitor emits smoke, abnormal noise, or a strange odor, immediately turn it off and contact  
the Westinghouse Service Center.  
WARNING To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose The LCD Monitor To  
Rain Or Moisture! The LCD Monitor shall not be exposed to dripping or splashing and objects filled with  
liquids, such as vases, shall not be placed on the Monitor.  
2
 
Safety Guidelines  
CAUTION: The power supply outlet should be located near the LCD Monitor and should be easily accessible.  
Always use the appropriate AC cord that is certified for your specific country. Some examples are listed below:  
USA.................. UL  
Canada............. CSA  
Germany........... VDE  
Switzerland ..........  
Britain ..................  
Japan ..................  
SEV  
BASE/BS  
Electric Appliance Control Act  
IMPORTANT NOTICE CONCERNING POWER CORD SELECTION  
The specific power cord for this LCD Monitor is enclosed and has been selected according to the country of  
destination and must be used to prevent electric shock. Use the following guidelines if it is necessary to replace  
the original cord set, or if the cord set is not enclosed. The female receptacle of the cord set must meet  
IEC-60320 requirements and should look like Figure A1 below:  
Figure A1  
Figure A2  
For the United States and Canada  
In the United States and Canada the male plug is a NEMA5-15 style (Figure A2), UL Listed, and CSA Labeled.  
For LCD Monitors that are placed on a desk or table, type SVT or SJT cord sets may be used. For LCD Monitors  
placed directly on the floor, only SJT type cord sets may be used. The cord set must be selected according to  
the current rating for the LCD Monitor. Please consult the table below for the selection criteria for power cords  
used in the United States and Canada.  
Cord Type  
Size of Conductors in Cord Maximum Current Rating of Unit  
18 AWG  
16 AWG  
14 AWG  
18 AWG  
17 AWG  
10 Amps  
12 Amps  
12 Amps  
10 Amps  
12 Amps  
SJT  
SVT  
FCC Compliance Statement  
This equipment has been tested and complies with the limits for a Class B digital device, pursuant to part 15 of  
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a  
residential installation. This equipment generates, uses, and can radiate radio frequency energy, and may cause  
harmful interference to radio communications if not installed and used in accordance with the instructions.  
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does  
cause harmful interference to radio or television reception, which can be determined by turning the equipment off  
and on, the user is encouraged to try to correct the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the LCD Monitor and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
Consult the Westinghouse Service Center or an experienced radio/Monitor technician for assistance.  
FCC Warning  
To assure continued FCC compliance, the user must use a grounded power supply cord and the provided  
shielded video interface cable with bonded ferrite cores. If a BNC cable used, use only a shielded BNC (5) cable.  
Also, any unauthorized changes or modifications not expressly approved by Westinghouse Digital Electronics  
will void the user's authority to operate this device.  
3
 
CLEANING THE LCD MONITOR  
MAKE SURE THE LCD MONITOR IS TURNED OFF  
NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE  
To clean the screen:  
1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.  
2. If it still is not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a  
clean, soft, lint-free cloth, and wipe the screen.  
To clean the case:  
1. Use a soft, dry cloth.  
2. If it still is not clean, apply a small amount of non-ammonia, non-alcohol based, mild non- abrasive  
detergent onto a clean, soft, lint-free cloth, then wipe the surface.  
Disclaimer  
Westinghouse Digital Electronics does not recommend the use of any ammonia or alcohol-based cleaners on  
the LCD Monitor screen or case. Some chemical cleaners have been reported to damage the screen and/or LCD  
Monitor case. Westinghouse Digital Electronics will not be liable for damage resulting from the use of any  
ammonia or alcohol-based cleaners.  
4
 
FEATURES  
Bright Display Image  
Ultra Fast Response Time  
Built-in Speakers (optional)  
Power Saver  
Plug & Play  
Kensington Security Lock Compatible (optional)  
Power Saver  
A power control system, Power Saver, is installed inside the LCD monitor. If the LCD  
monitor has not been used for a certain period of time, the system will turn the LCD  
monitor to low voltage mode to save electrical power. Slight movement of the mouse or  
pressing any key on the keyboard will return the original screen image. You can use your  
PC to set the function.  
The LCD monitor is compatible with EPA ENERGY STAR and NÜTEK if used with a  
VESA DPMS computer. To save power, turn off the LCD monitor power when not in use.  
Plug & Play  
VESA Plug and Play eliminates the complicated and time-consuming installation  
process. Your computer system will identify and automatically adjust the LCD monitor. The  
LCD monitor uses Display Data Channel (DDC) to send Extended Display  
Identification Data (EDID) to the computer system, so the computer system can  
automatically adjust the LCD monitor.  
5
 
INSTALLATION  
Congratulations on your purchase of a Westinghouse widescreen LCD Monitor. Sleek and practical, this  
lightweight LCD monitor delivers a bright and clear display optimized for high display resolution from your PC or  
notebook computer.  
Package Contents  
Your product package includes:  
Westinghouse Widescreen LCD Monitor  
Detachable Base Stand  
AC Power Cord  
VGA Cable  
User’s Manual  
Warranty Card  
Specification Sheet  
Optional contents (depends on connectors of monitor):  
3.5 mm Mini-Stereo Cable  
DVI-DVI or DVI-HDMI Cable  
USB cable  
3.5 mm Microphone Cable  
1. Attaching the Base Stand to the LCD Monitor  
Place the base on a flat surface, align the holes and tabs and slide monitor neck onto the base until it snaps  
into place.  
* To remove the base stand, place monitor face down on a flat and soft surface, press the tabs on the bottom  
of the stand neck and remove the base.  
2. Connect Your Computer and Other Devices  
Connect one of the cables into the back of this LCD Monitor.  
IMPORTANT: Before beginning, make sure the monitor, PC and other devices are turned off.  
3. Connect Power Cable  
Connect the AC power cord to the LCD Monitor (to the connector labeled “AC-IN”) and then connect the cord  
into a properly grounded AC outlet.  
4. Turn the Power On  
Remove the protective film on the front of the monitor. Press the power button on the side of the LCD  
monitor first, and then power on the PC and A/V devices.  
NOTE: If the monitor image looks fuzzy, adjust the computer’s resolution to the preferred. To do that, you  
may need to download and install the latest drivers for your graphic card and reboot your computer.  
6
 
Control Panel Buttons  
Use the control buttons in the front of the LCD Monitor to display the On Screen Display (OSD) menu. Below is a  
list of the control button functions. The OSD controls are defined in “OSD Functions” on page 8.  
Scroll up the OSD sub-menu list when the OSD is displayed.  
1.  
Scroll down the OSD sub-menu list when the OSD is displayed.  
2. ▼  
Move a selection left when the OSD is displayed.  
3. W  
Move a selection right when the OSD is displayed.  
4. X  
Press or hold this button to switch between different video inputs  
5.  
6.  
or enter/exit the OSD menu.  
Power On and Off button.  
7
 
OSD Menu Functions  
All the function settings for this LCD monitor are controlled via the control keys located on the side of the monitor.  
To display the OSD main menu, press the keypad button on the control panel. (Note: The OSD menu  
display will disappear automatically after approximately 10 seconds, if no action is taken.)  
This LCD monitor has been adjusted to optimal settings before shipment. If needed, adjustments to the monitor  
settings can also be made using the OSD menu.  
Press the  
button to display the OSD.  
Press theorbutton to scroll through the sub-menus (Image, Audio, Color, Miscellaneous, and  
Information Sub-Menus).  
Press the X button to enter the sub-menu.  
Press theorbutton to select the function to be adjusted.  
Press the W orXbuttons to change the current setting of the sub-function.  
To go back to the previous menu, press the  
button. Changes are saved automatically.  
To exit the OSD menu press  
again. It automatically will save any changes that have been made.  
Source  
(Example)  
Image Menu  
Audio Menu  
Color Menu  
Miscellaneous Menu  
Info Menu  
Resolution & Frequency  
Extra functions:  
DDC/CI: Allows the monitor to communicate with PC graphic card under Microsoft Windows Vista.  
DCR: To turn on or off Dynamic Contract Ratio.  
Language: Select OSD languages in between different languages.  
Auto Setting: Set to automatically perform Auto-Configuration function when a new timing is detected.  
CM Engine: Start with Color Management Engine.  
Optimal aspect ratio: ideal fit your display to the viewable area of the monitor.  
Reset: Restore this LCD monitor to its factory default settings.  
NOTES:  
Any changes are automatically saved in memory when the OSD turns off. Turning off the power should be  
avoided while using the OSD menu.  
Adjustments for clock, phase, and positions are saved for each individual signal timing. Except for these  
adjustments, all other adjustments have only one setting, which applies to all signal timings.  
The icon color will change from gray to blue when a sub-menu is selected.  
8
 
Quick Adjustments  
You can skip the Menu pages and display an adjustment scale directly by using the following button operations:  
Brightness: Press the X Brightness button when the Menu is not displayed.  
Contrast: Press the W Contrast button when the Menu is not displayed.  
Auto Setting: Press the button when the Menu is not displayed.  
Volume Control: Press the button when the Menu is not displayed to adjust volume.  
Modes: Hold the button when the Menu is not displayed to switch between display modes.  
9
 
Display Modes  
The monitor backlighting can be controlled by using the key on the control keypad. There are 3 modes:  
Economy, Text, and Picture. To toggle between these modes, press the key until the mode you desire is  
selected. These modes automatically change the backlighting levels between bright, brighter, and brightest.  
1. Economy Mode – Reduced brightness  
2. Text Mode – Normal  
3. Picture Mode – High brightness  
NOTES:  
Changing to a lower brightness mode can lessen eye fatigue.  
Change from Picture Mode to Text Mode when working with text.  
Change from Text Mode to Economy Modes when viewing the screen for long periods.  
10  
 
Troubleshooting  
No Power  
Make sure the AC cord is plugged into the back of the LCD monitor.  
Make sure the AC power cord is securely connected to an AC outlet.  
Plug another electrical device (like a radio) to the power outlet to verify that the outlet is supplying the  
proper voltage.  
No Screen Image  
Make sure monitor is turned on.  
Make sure the video cable is securely connected to both the monitor and PC or Notebook or  
Audio/Video apparatus.  
Make sure you have selected the correct video input source.  
Adjust the brightness and contrast levels.  
Fuzzy Image  
Set desktop resolution on your PC to the Preferred mode.  
Perform Auto Adjust on the monitor.  
Adjust Phase/Sharpness setting on the monitor.  
“Out Of Range”  
Set screen resolution to panel native resolution at 60 Hz.  
Cannot Find "Preferred" Mode on My Display Properties  
You may need to download and install the latest video card driver for your PC. Listed below are websites  
for major video card manufacturers:  
Image Too Bright or Too Dark  
Adjust the brightness and contrast levels under the OSD menu.  
Make sure the video cable is securely connected to both the monitor and PC or Notebook or  
Audio/Video apparatus.  
Distorted Image  
Reset the LCD monitor by performing the “Reset” function using the OSD.  
Remove extra accessories (such as a VGA extension cord).  
11  
 
Image Is Not Centered (size is not scaled correctly)  
Perform Auto Adjust.  
Adjust the horizontal and/or vertical position using the OSD.  
Check image size setting.  
Colors Are Incorrect  
Make sure the video cable is securely connected to both the monitor and PC or Notebook.  
Adjust the color setting using the OSD.  
No Sound  
Check your audio connection.  
Check your audio settings; make sure “Mute” is off.  
Adjust the volume level higher inside of OSD Menu.  
How to Connect a DVI-D Input To the Monitor  
Use a DV-DVI (or DVI-HDMI) cable to connect between PC with DVI output and the DVI (or HDMI) input  
of the monitor.  
Start PC, monitor will indicate a DVI signal once detected via its information OSD menu.  
Audio input of the monitor will switch to its 3.5 mm stereo jack automatically.  
Additional Questions  
Contact Westinghouse Digital Electronics Customer Service at (866) 287-5555 or write us at  
Please visit our website for more information  
12  
 
Westinghouse Digital Electronics  
Santa Fe Springs, CA  
SE-UM-2604-0701  
 

Weslo Treadmill WETL268051 User Manual
Whirlpool Oven BES450WB1 User Manual
Whirlpool Ventilation Hood RH2330XJB1 User Manual
Whirlpool Washer 3953964 User Manual
Wow Wee Robotics 8095 User Manual
Xantrex Technology Portable Generator PV225S 480 P User Manual
Xilinx Network Card v100a User Manual
Yamaha Portable Speaker A12 User Manual
Zanussi Cooktop 200476 User Manual
Zanussi Dishwasher DE 6744 User Manual