READ AND SAVE THESE INSTRUCTIONS
Whole Room Heater Owner’s Guide
LEER Y GUARDAR ESTAS INSTRUCCIONES
Guía del propietario el calentador para ambientes
model VTH
Contents
Important Instructions ........................................................................4
Vornado Vortex Action .......................................................................6
Controls...............................................................................................7
How To Use
Getting Started...............................................................................7
Resetting Your Vornado Heater......................................................8
Advanced Safety Features..................................................................8
Cleaning and Storage
How To Clean..................................................................................9
Storage............................................................................................9
Operating Tips....................................................................................9
Troubleshooting ...............................................................................10
Warranty............................................................................................11
Product Specifications ......................................................................21
Español p. 12
English
3
IMPORTANT INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THIS HEATER.
Please visually inspect all internal and external components before
Always unplug heater when not in use.
connecting to electric current. If any damage is found, DO NOT USE
THIS UNIT and contact Vornado Air LLC at 1-800-234-0604.
Do not operate any heater with a damaged cord or plug or after
the heater malfunctions, has been dropped or damaged in any
manner. Discard heater, or return to authorized service facility for
examination and/or repair in order to avoid a hazard.
Do not use outdoors.
This heater is not intended for use in bathrooms, laundry areas and
similar indoor locations. Never locate heater where it may fall into a
bathtub, swimming pool or other water container.
Do not run cord under carpeting. Do not cover cord with throw
rugs, runners, or similar coverings. Do not route cord under
furniture or appliances. Arrange cord away from traffic area and
where it will not be tripped over.
This appliance has a polarized plug (one blade is wider than the
other). To reduce the risk of electric shock, this plug is intended to
fit in a polarized outlet only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to defeat this safety feature.
When using electrical appliances, basic precautions should always
be followed to reduce the risk of fire, electric shock, and injury to
persons, including the following:
To disconnect heater, turn controls to off, then remove plug from
outlet.
Read all instructions before using this heater.
This heater is hot when in use. To avoid burns, do not let bare skin
touch hot surfaces. Use handles when moving this heater. Keep
combustible materials, such as furniture, pillows, bedding, papers,
clothes, and curtains at least 3 feet (0.9 m) from the front of the
heater and keep them away from the sides and rear.
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety. Children should be supervised
to ensure that they do not play with the appliance. Extreme caution
is necessary when any heater is used by or near children or invalids
and whenever the heater is left operating and unattended.
Do not insert or allow foreign objects to enter any ventilation or
exhaust opening as this may cause an electric shock or fire, or
damage the heater.
To prevent a possible fire, do not block air intakes or exhaust in any
manner. Do not use on soft surfaces, like a bed, where openings
may become blocked.
A heater has hot and arcing or sparking parts inside. Do not use
it in areas where gasoline, paint, or flammable liquids are used or
stored.
Use this heater only as described in this manual. Any other use not
recommended by the manufacturer may cause fire, electric shock,
or injury to persons.
Always plug heaters directly into a wall outlet/receptacle. Never
4
English
IMPORTANT INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THIS HEATER.
use with an extension cord or relocatable power tap (outlet/power
may cause overheating and distortion of the plug. Discontinue use
of the product. Contact a qualified electrician to replace loose or
worn outlet.
strip). Operate this heater only in its upright position.
Do not operate this heater on an elevated surface such as a shelf or
desktop. Use only while placed on the floor.
This heater is equipped with a thermal safety shut-off system,
designed to turn off the heater when an internal overheating
condition is detected (see How To Use “RESETTING YOUR
VORNADO HEATER,” to determine how to check and reset the
heater).
Do not use this heater on a circuit that has a variable speed device
operating, such as a blender or a variable speed fan.
Do not use heater to dry human or animal hair/fur or articles of
clothing.
CAUTION: In order to avoid a hazard due to inadvertent resetting
of the thermal cutout, this appliance must not be supplied through
an external switching device, such as a timer, or connected to a
circuit that is regularly switched on and off by the utility.
Do not use this heater in an RV, a boat, or in any application where a
DC/AC converter is converting battery power to AC power.
Do not use the heater on any Ground-Fault Circuit Interrupted
(GFCI) circuit. A GFCI circuit has a reset button in the middle of the
outlet.
Do not use this heater on a surge protected circuit.
Do not use the heater with any kind of timer to turn the unit on or
off.
Do not use this heater on a circuit that is shared with a high power
device, such as a vacuum or a circular saw.
CAUTION: A loose fit between the outlet (receptacle) and plug
SAVE THESE INSTRUCTIONS
English
5
Trust.
®
Vornado Vortex Action
It is said that trust isn’t given, but earned. For decades Vornado has
been earning the trust of our customers by offering them only the
best. Vornado provides the highest level of performance, coupled
with the highest level of support available. Complete satisfaction
with no exceptions – this is Vornado’s promise to you. If you are
not satisfied for any reason, please contact us. Knowledgeable
representatives are available at 1-800-234-0604 from 7:00 AM to 6:00
PM CST. A wealth of additional support is also available online at
Andover, Kansas headquarters – thank you for selecting Vornado.
Ordinary Heater
Without Adequate
Heat Circulation
Vornado Whole
Room Heater
With Signature
Vortex Heat
Circulation
82º
82º
82º
72º
72º
Sincerely,
Randy Brillhart
CEO, Vornado Air
72º
62º
Ordinary heaters provide only localized heat. Heat
immediately rises to the ceiling, resulting in cold and hot
spots in the room. Vornado’s unique Vortex Action delivers
continuous, uniform heat surrounding everyone in the
room in a warm, comfortable temperature.
6
English
Controls
How To Use
Getting Started
1
2
Thermostat
Allows you to select your
desired comfort level.
Using your Vornado Heater is easy. Just follow these simple steps.
1. Position your heater so the vortex beam of warm air is directed
across the room, unobstructed. Position it in a location that
is representative of the room temperature. Avoid areas of
temperature extremes such as cold drafts and heat registers. Please
refer to IMPORTANT INSTRUCTIONS at the beginning of this
owner’s guide.
Fan
In the Auto position, the fan
will cycle on and off with
the heating element. In the
High position, the fan will run
continuously.
1
2. Plug power cord into a standard wall outlet.
3. Press the Power switch to On.
4. Turn the Thermostat knob to the desired setting.
3
4
Heat
2
3
1500 watts on High and 750
watts on Low.
Power On/Off
Front light illuminates when
power is on.
4
English
7
How To Use
Advanced Safety Features
Tight Grill Spirals
Resetting Your Vornado Heater
Resists curious fingers.
Your Vornado Heater has a multi-level safety shut-off system
designed to prevent overheating. Overheating may occur when
the inlets or outlet are blocked, a foreign object prevents the
blade from turning, or the appliance tips over. If this happens,
the safety shut-off system will cut power to the heat element
and you will need to manually reset the heater.
Cool Touch Case
Safe to touch, even on high heat setting.
1. Set the Power switch to Off and unplug the unit.
2. Remove any obstructions.
3. Wait 5–10 minutes, allowing the unit to cool down.
4. Plug in the unit and place in desired position.
5. Set the Power switch to On. Your Vornado Heater should now
function normally.
Automatic Safety Shut Off System
If airflow becomes blocked and overheating occurs,
power to the heating element and fan is shut off.
Note: If the safety shut-off system repeatedly shuts off your
heater or if it will not reset after following the above procedure,
DO NOT ATTEMPT TO DISASSEMBLE THE UNIT. Call Vornado
Consumer Services Department toll-free at 1-800-234-0604.
Tip-Over Switch Protection
If tipped more than 10 degrees in any direction, heat
and fan functions immediately shut down.
Ideal 120°F Exit Air Temperature
Warm enough to heat an entire room.
8
English
Cleaning and Storage
Your heater has no user serviceable parts. Do not disassemble the
unit. This will void your warranty. If service is required, return your
heater to Vornado (see WARRANTY for instructions).
The motor is permanently lubricated and requires no oiling.
Operating Tips
In smaller areas, you might prefer to set the unit in LOW mode. A
vortex beam of air will gently keep the air circulating in the room
for even, uniform heating.
How to Clean
In larger spaces, you might prefer to set the unit in HIGH mode. A
vortex beam of air will gently keep the air circulating in the room
for even, uniform heating.
To use the VTH as a personal fan, set the Fan mode to High and
Thermostat to “1” position.
The VTH, like any other 1500-watt electric heater, draws up to 12.5
amps of electric current. If using your VTH on HIGH setting causes
your home circuit breaker or fuse to trip, we offer the following
suggestions:
Try turning off other electrical appliances that run on the same
circuit as your heater.
Run your heater in LOW mode.
Because your heater moves a substantial
amount of air, it will need regular cleaning.
To clean follow these simple instructions:
1. Unplug the unit.
Note: Do not use gasoline, thinners, sol-
vents or other chemicals for cleaning.
View how to clean your
Vornado heater on your
mobile device.
2. Use the brush attachment on your
household vacuum cleaner to vacuum
any accumulated dust off the Front Grill and Air Inlets. Wipe down
the entire surface with a soft cloth.
Have your electrician add an additional circuit to your home’s
electrical system.
Note: Vacuuming the outside of the heater is recommended on a
bi-weekly basis. You may also blow the heater out with high pressured
air. This can be purchased from your local hardware store.
When the room temperature is higher than the set temperature it
is normal and correct to have little to no heat coming out of the
VTH. When the unit is first turned on there is a slight delay before
heat will start to be produced.
ALWAYS USE COMMON SENSE WHEN USING THIS AND/OR
ANY ELECTRICAL APPLIANCE.
Do not use more than one heater at a time.
Never ignore or take lightly the signs of an electrical problem, such
as:
Storage
During the off-season or after extended periods of non-use, you may
choose to store your heater. To ensure long life of the product, it is
recommended to store your heater by following these instructions:
1. Unplug power cord and bundle loosely.
Warm outlet cover plates
2. Thoroughly clean your heater (see instructions above).
3. Cover, or place back in retail carton if available. This will prevent
the unit from accumulating dust overtime.
Sparking at outlet when plugging in or during operation
Light flickering or dimming (indicates a shared circuit or
problem)
4. Store unit in a cool and dry location.
Investigate the cause of these before continuing to use the heater.
English
9
Troubleshooting
Problem
Possible Cause and Solution
Unit fails to power on.
Unit is not plugged in. Plug Power Cord into electrical outlet.
Household circuit breaker / ground fault interrupter has tripped or blown a fuse. Reset circuit breaker /
ground fault interrupter, or replace fuse (See OPERATING TIPS).
The unit has overheated. Automatic Safety Shut-Off has initiated (See RESETTING YOUR VORNADO HEATER).
Unit is damaged or in need of repair. Cease usage and unplug. Contact Consumer Service for assistance.
Ensure unit is set to High Heat and thermostat is set to highest Temperature setting.
Close all doors and windows to trap heat.
Unit is not producing
sufficient amount of heat.
Allow the unit to fully circulate the heat throughout the room, may take several minutes.
10 English
Whole Room Heater • 5 Year Limited Warranty
Vornado Air LLC (“Vornado”) warrants to the original consumer or purchaser this
Vornado Whole Room Heater (“Product”) is free from defects in material or workmanship
for a period of five (5) years from the date of purchase, depending on model. If any such
defect is discovered within the warranty period, Vornado, at its discretion, will repair or
replace the Product at no cost. Repairs not covered by the warranty or outside the warranty
period will require a fee to cover the cost of materials, labor, handling and shipping.
[email protected] to obtain a Return Authorization (“RA”) form. Please have
or include your Product’s model number and serial number, as well as your name, address,
city, state, zip code and phone number when contacting Vornado for warranty service.
After receiving the RA form, ship your Product to:
Vornado Air LLC
®
Attn: Warranty & Repair
415 East 13th Street
This warranty does not apply to defects resulting from abuse of the Product, modification,
alteration, repair or service of the Product by anyone other than Vornado, mishandling,
improper maintenance, commercial use of the Product, damages which occur in shipment
or are attributed to acts of God.
Andover, KS 67002
For your convenience, please have your model number and serial number when contact-
ing Vornado with service inquiries. To assure proper handling, packages must be clearly
marked with the RA number. Packages not clearly marked with the RA number may be
refused at the receiving dock.
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE
REMEDY OF THE CONSUMER. VORNADO SHALL NOT BE LIABLE FOR ANY INCIDEN-
TAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED
WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE
LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS
WARRANTY.
Please allow 1-2 weeks for repair and return of your Product after the Product is received.
For your records: Staple or attach your original sales receipt to this Owner’s Guide. Please
also write your products’s serial number below (located on product specs decal).
Serial No. ______________________________________
Some states do not allow the exclusion or limitation of incidental or consequential dam-
ages, or allow limitations on how long an implied warranty lasts, so the above limitations or
exclusions may not apply to you. This warranty gives you specific legal rights, and you may
have other rights that vary from state to state.
© 2014 Vornado Air LLC Andover, KS 67002
Patents Pending. Specifications subject to change without notice.
®
Vornado is a trademark owned by Vornado Air LLC.
Assembled, designed and supported in the U.S.A.
For warranty or repair service, call 1-800-234-0604 or email
English 11
Vornado Air, LLC
415 East 13th Street, Andover, Kansas 67002
CL3-0099 RC
CL7-0099 RC, V00
|