VocoPro Karaoke Machine CLUB 6800 User Manual

Quick Start  
Quick Reference Setup Guide  
CLUB-6800  
This quick reference guide is provided to help you set up your  
CLUB-6800 system for the first time. It contains instructions  
on setting up the products that are included in the CLUB-  
6800. If you are connecting any additional gear that is not  
included in the CLUB-6800, refer to the appropriate manuals  
for detailed instructions.  
Gathering Package Contents  
The first step to putting together your new CLUB-6800 system is unpacking all of the necessary equipment. Remem-  
ber to keep your manuals nearby when setting up, as you may need to reference them. The products listed below are  
included in the CLUB-6800 system:  
CDG-9000 PRO  
• [1] Instruction Manual  
SS-88 Speaker Stands  
• [2] SS-88 speaker stands  
KJM-8000 PRO Digital Key Control Karaoke Mixing Board  
• [1] Instruction Manual  
CLUB-8 Road Case  
• [1] CLUB-8 road case  
• [1] Rolling cart  
• [2] MK-38 PRO microphones  
• [1] Gooseneck DJ light  
• Rack-mounting screws  
VP-600 PRO 600W Professional Power Amplifier  
• [1] Instruction Manual  
VX-15 Vocal Speakers  
• [2] VX-15 speakers  
Mounting components into the CLUB-8  
Below is one way to configure your CLUB-6800:  
Follow these basic guidelines when mounting:  
• Always screw in the mounting screws using an “X” forma-  
tion.  
• If possible, to keep the products cooler, leave some space in  
between the components in the rack.  
1
3
4
CDG-9000 PRO CONTROLLER  
KJM-8000 PRO MIXER  
2
CDG-9000 PRO PLAYER  
VP-600 PRO AMPLIFIER  
On the web at www.vocopro.com  
or call toll free 1-800-678-5348  
 
CDG-9000 PRO player unit to KJM-8000 PRO  
2
You have the option of either connecting each deck of the CDG-9000 PRO separately (Fig. 1) or together through a single  
SWITCHED output (Fig. 2).  
Separately through individual deck outputs (Fig.1)  
Using RCA cables:  
1. For each deck, connect the L/R (red & white) audio outputs and Video (yellow) output on the CDG-9000 PRO to the  
CDG(1) and DVD(3) inputs on the rear panel of the KJM-8000 PRO  
CDG-9000 PRO Player  
CDG(1)  
DVD(2)  
CDG(1)  
DVD(2)  
KJM-8000 PRO Mixer  
CDG-9000 PRO Player  
LD(3)  
LD(3)  
Together through SWITCHED output (Fig. 2)  
Using RCA cables:  
1. Connect the L/R SWITCHED audio and  
SWITCHED video outputs on the CDG-9000  
PRO player to the CDG(1) audio input on the  
KJM-8000 PRO  
CDG(1)  
DVD(2)  
KJM-8000 PRO Mixer  
LD(3)  
KJM-8000 PRO to VP-600 PRO  
3
You can do this using either XLR(f) to XLR(m) cables or XLR(f) to ¼”(m) cables. Below are instructions for each.  
Using two XLR(f) to XLR(m) (Fig.1)  
Using two XLR(f) to ¼”(m) (Fig. 2)  
1. Connect the XLR(f) end to the LEFT MASTER AUDIO  
XLR output on the KJM-8000 PRO and the XLR (m) end  
to the left XLR audio input on the VP-600 PRO.  
2. Now do the same thing except now go from the RIGHT  
MASTER AUDIO XLR output on the KJM-8000 PRO and  
the right XLR audio input on the VP-600 PRO  
1. Connect the XLR(f) end to the LEFT MASTER AUDIO XLR  
output on the KJM-8000 PRO and the ¼”(m) end to the CH.  
B ¼” audio input on the VP-600 PRO.  
2. Now do the same thing except now go from the RIGHT  
MASTER AUDIO XLR output on the KJM-8000 PRO and the  
CH. A ¼” audio input on the VP-600 PRO.  
BRIDGED  
OUTPUTS  
BRIDGED  
OUTPUTS  
STEREO 300W  
STEREO 300W  
PER CHANNEL  
PER CHANNEL  
INTO  
4
OHM  
INTO  
4
OHM  
BALANCED  
VP-600 PRO Amplifier  
KJM-8000 PRO Mixer  
600W MONO  
BRIDGED INTO  
BALANCED  
600W MONO  
BRIDGED INTO  
8
OHM  
8
OHM  
CH.  
B
CH.  
A
MONO  
CH.  
B
CH.  
A
CH.  
B
CH.  
A
MONO  
CH.  
B
CH.  
A
MONO  
BRIDGE  
STEREO  
MONO  
BRIDGE  
STEREO  
INPUTS  
MODEL VP-600 PRO  
INPUTS  
MODEL VP-600 PRO  
CDG(1)  
DVD(2)  
CDG(1)  
DVD(2)  
LD(3)  
LD(3)  
 
VP-600 PRO to VX-15 speakers  
4
VP-600 PRO Amplifier  
Using two 9’ MDP (Banana Plug) to ¼” speaker cables  
1. Connect the MDP end to CH.B on the rear panel of the  
VP-600 PRO and  
BRIDGED  
OUTPUTS  
STEREO 300W  
PER CHANNEL  
INTO OHM  
4
BALANCED  
600W MONO  
BRIDGED INTO  
8
OHM  
CH.  
B
CH.  
A
MONO  
CH.  
CH.  
MONO  
BRIDGE  
STEREO  
2. Connect the ¼” end to one of the two VX-15’s.  
3. Repeat this for the second speaker, except now connect  
the MDP end to CH. A on the VP-600 PRO.  
INPUTS  
MODEL VP-600 PRO  
VX-15 Speaker #1  
VX-15 Speaker #2  
Connecting Microphones to the KJM-8000 PRO  
5
Using either a mic cable with two XLR ends (Fig. A) or an XLR to ¼” cable (Fig. B):  
Connect the microphone cables to the MIC inputs on the rear panel of the KJM-8000 PRO.  
CDG(1)  
DVD(2)  
CDG(1)  
DVD(2)  
KJM-8000 PRO Mixer  
LD(3)  
LD(3)  
Adding the VSP-M1 to the CLUB-6800 system  
6
Using either a mic cable with two XLR ends or an XLR to ¼” cable:  
1. Connect the XLR(f) end to the LEFT BALANCED OUTPUT on the rear panel of the VSP-M1.  
2. Connect the XLR(m) or ¼” end to MIC input 1 on the rear panel of the KJM-8000 PRO.  
3. Follow the above steps, now going from the RIGHT BALANCED OUTPUT on the VSP-M1 to MIC input 2 on the rear panel  
of the KJM-8000 PRO.  
4. Connect the mics to the mic inputs on the rear panel of the VSP-M1.  
VSP-M1 Processor  
CDG(1)  
DVD(2)  
KJM-8000 PRO Mixer  
LD(3)  
 

Technics Car Amplifier SU 810 User Manual
Tektronix Car Amplifier 5A18N User Manual
Thule Automobile Accessories 079 User Manual
Toastmaster Hot Beverage Maker 596P User Manual
TRENDnet Router TEW 659BRV User Manual
Tripp Lite Switch U222 007 R User Manual
Univex Mixer ME130 User Manual
Univex Scanner NeatDesk User Manual
Viking Range F20537 User Manual
VTech Baby Gym Smart Key User Manual