Vizio Flat Panel Television E320VL User Manual

®
E320VL / E370VL / E420VL / E420VO / E470VL / E550VL  
LCD HDTV QUICKSTART GUIDE  
Fig. 1  
5
SETUP (Cont.)  
1. The Initial Setup menu should appear on-screen. Use your remote control to  
follow the directions on the HDTV. Be sure to insert the batteries in your remote first.  
HELP TOPICS  
PROGRAM YOUR CABLE OR SATELLITE REMOTE  
2. Select your desired language (see Fig. 1).  
Fig.2  
Fig. 3  
Fig. 4  
Fig. 5  
Call your Cable or Satellite provider to determine if you need a 3, 4 or 5-digit code. Refer to the following chart of VIZIO codes and follow your provider's instructions to program your Cable or Satellite remote.  
3. Choose Home Mode for optimal energy savings (see Fig. 2).  
SERVICE PROVIDER  
5-DIGIT CODES  
4-DIGIT CODES  
3-DIGIT CODES  
IF YOU USE A CABLE OR SATELLITE BOX:  
1. Exit the Setup Wizard.  
CABLE  
11758, 10178, 10128  
11758, 10178, 10128  
1758, 0178, 0128  
1758, 0178, 0128  
2. Select the input source for the device you are connecting to your HDTV.  
3. You’re done! Enjoy the show.  
DIRECT TV  
DISH NETWORK  
627  
IF YOU USE A CABLE FROM THE WALL OR AN  
ANTENNA TO RECEIVE TV CHANNELS:  
1. Choose between Cable or Antenna to match your input source (see Fig. 3).  
2. Begin the scan for channels (see Fig. 4).  
PROBLEM  
SOLUTION  
Note: Your Service Provider may provide access to HD channels during the channel scan.  
Please be patient and wait for 100% completion.  
3. Once the scan is complete, follow the on-screen instruction to exit the  
Initial Setup menu (see Fig. 5).  
Make sure the power button is ON . Make sure the AC power cord is securely connected to the AC socket and try plugging the TV  
directly into the wall. Plug another electrical device (like a radio) to the outlet to verify the outlet is supplying power.  
No Power  
For the best image quality, view HD wide screen programs where possible. If HD content is not available, view Standard Definition  
from a digital source. Standard analog TV will always be noticeably inferior to HD because your digital flat panel TV has video that  
is many times better than old TVs, and thus you can see interference and deficiencies you did not know you had.  
Picture is blurry or fuzzy/  
image quality issues  
Press the MENU button. Use the arrows to navigate to the TV TUNER MENU. Highlight the first option, called Tuner Mode. Select the  
appropriate input by using the left and right arrows. Once Tuner Mode is correct, highlight "AutoSearch", then press the right  
arrow.  
Cannot change channels up and  
down with direct cable hookup  
from wall or antenna  
LEARN MORE  
EXTENDED  
Refer to your User Manual for in-depth descriptions or  
more information.  
WARRANTIES  
Protect your VIZIO product with up to 5 years of added  
repair service! Extended coverage begins when the  
manufacturer's warranty expires so you’ll receive  
maximum protection!  
The Setup Wizard is no longer accessible after being run once, but all of the same settings can still be changed. Press the MENU  
button to access them. For channel scan, see the above topic.  
Cannot return to the Setup Wizard  
REGISTER NOW  
Your TV may be on an inactive input. After powering on the TV, press the INPUT button on your remote repeatedly until a picture  
re-appears. If this does not work, try it a second time but press the button slower this time; it can take as long as 30 seconds for  
the image to reappear.  
Screen is displaying blue/no  
signal and/or turning off after a  
few seconds  
Register your product today and receive the latest VIZIO news  
Visit us online at:  
and special offers.  
When the TV displays an HD resolution the Panoramic viewing mode will not be available.  
Panoramic mode is not available  
or Call:  
(888) 849. 4623  
For more info on Extended Warranties  
Try setting your TV to wide or zoom mode; the image should fill the screen. If you still see bars, they are part of the image the TV is  
receiving. Cable and satellite boxes may add black bars to the picture, especially when HDMI cables are used. For more  
information, please contact your service provider.  
Black or gray bars on top, bottom,  
and/or sides of picture  
 

Timex Clock T256 User Manual
Toshiba Laptop A45 Series User Manual
Toshiba Network Card TIC LF494B User Manual
TRENDnet Network Router TEW 631BRP User Manual
Tripp Lite Welding System 1250 3000 VA User Manual
Varimixer Mixer W150PL User Manual
Vidikron Projection Television Vision 120 User Manual
Viking Oven DEDO127 130 User Manual
Vista Imaging Speaker VR6 User Manual
Vulcan Hart Oven ML 114569 User Manual