Vivitar Digital Camera ViviCam 2750 User Manual

ViviCam 2750  
Digital Still Camera  
User Manual  
And Technical Support Guide  
Rev. April 13, 1999  
 
Getting Started  
Congratulations on purchasing the ViviCam 2750 Digital Camera. This camera  
brings to you the ease-of-use of a traditional camera, combined with high-tech  
functionality. It includes a full-color image LCD (Liquid Crystal Display) for  
image previewing which allows you to immediately see the images you have just  
taken. It also includes a built-in multi-mode flash with an auto-flash sensor,  
which automatically detects whether the flash should be engaged or not. There  
is 2 MB (megabytes) of internal digital storage memory for storing your images.  
You may use additional Compact Flash memory cards (up to a maximum of 32 MB in  
capacity) for storing additional images.  
Once you have finished taking your images, you may view them on a TV/monitor, or  
you may uploaded them to your personal computer. From there, you can use the  
included image editing software to enhance your images before you print or email  
them.  
What's Inside:  
Included with your camera are –  
· ViviCam 2750 Digital Still Camera with 2 MB internal memory.  
· Quick Start Guide.  
· Owner’s Manual.  
· Twain driver (on diskettes or CD).  
· Image editing software, on CD-ROM.  
· Hand Strap.  
· Carrying Pouch.  
· Serial Data cable which connects the camera to your PC.  
· Video cable which allows you to connect your camera to a TV/Monitor.  
· 4 x AA batteries.  
· Warranty Card.  
· Various promotional items and special offers for camera accessories.  
Please note that the basic inclusions do vary somewhat depending upon special  
manufacturing circumstances, and promotional programs in which your dealer or  
supplier may have specified unique or special package contents.  
 
Optional Items:  
Vivitar Corporation has been developing and marketing Digital Still Cameras  
since 1996. In that time we have learned a great deal from our customers about  
their needs and concerns with consumer digital imaging. The two most common  
concerns, or issues are 1) PC connectivity, and 2) Battery life.  
The following accessories are strongly suggested to address those issues, and  
further enhance your ownership experience. We suggest the use of the following  
optional accessories –  
1. Rechargeable batteries and chargers. Digital cameras are notorious for  
battery consumption. It is highly recommended that digital camera users use  
rechargeable NiMH (Nickel-Metal Hydride) AA batteries. Ideally, you would  
have two sets of these batteries and one charger. One set of batteries can  
be on-charge, while the second set would be in the camera. As the batteries  
deplete you would rotate the battery sets between charger and camera.  
2. Compact Flash cards for additional image storage. These are available in  
various sizes from 2 MB to 32MB. Please note that the ViviCam 2750 has an  
upper memory limit of 32 MB. Do not attempt to use CF cards greater than 32  
MB in capacity.  
3. A Compact Flash card reader that allows you to download your images directly  
from a CF card to your PC via parallel port, or USB port. This method is  
much faster and easier than using a serial-data cable connection. This  
allows you to by-pass the serial data download process altogether. The CF  
reader is much faster and circumvents serial communications conflicts.  
4. A PCMCIA CF adapter that allows mobile computers (laptops and notebooks) to  
read CF memory cards directly into a PCMCIA slot on your notebook computer.  
This allows notebook computer users to by-pass the serial data download  
process altogether. The CF adapter is much faster and circumvents serial  
communications conflicts.  
5. AC Adapter. The optional 6.0 VDC power adaptor that allows you to use  
household AC power to operate your camera. This is generally useful while  
downloading your images.  
These items are available through your dealer, most computer stores, on-line  
sources, or from the telephone ordering and fulfillment centers listed on the  
promotional coupons.  
CD-ROM or Diskette Contents  
There are two pieces of software required to connect your digital camera to your  
PC. The most fundamental component of software is called a “driver”. A driver  
is a software module that tells your computer, and its applications, about the  
specific nature of your camera (hardware) device. In the case of a digital  
camera, the driver has a User Interface (DUI) that helps you to download images  
from your camera, and also make adjustments and changes to the camera itself.  
Furthermore, the driver included with the ViviCam is a “Twain” driver. Twain is  
an industry communication standard (protocol) by which hardware developers  
(camera companies, like Vivitar Corporation) and software application developers  
have agreed to in order to ensure universal hardware/software compatibility and  
inter-operability. What this means to the user is that the ViviCam 2750, being  
Twain-compliant, will “talk” to any virtually any software application (an image  
editing application, for example) which is also Twain compliant.  
 
To determine if your favorite imaging software is Twain-compliant consult the  
manual, the software developer, or review the help files and look for keywords  
such as Twain, and acquire.  
The second piece of software you will need to download your images is an image  
editing application. This must be a Twain-compliant application, of course.  
Depending upon the manufacturing circumstances of your particular ViviCam 2750  
camera the Twain drivers will be either on a diskette, or on a CD-ROM together  
with an image editing software.  
Summary –  
· TWAIN driver. Lets you download pictures from a Twain-compliant device  
straight into your computer.  
· Twain-compliant photo/image editing software. A software application that  
allows you to quickly and easily download, save, and edit (touch-up) an image  
captured with your camera.  
 
PC System Requirements  
· A IBM compatible PC with minimum 486/66 Mhz processor, or higher.  
· Microsoft Windows 95, or Windows 98. Windows 3.X is not supported.  
· 8MB or more of RAM. (16 MB is preferred)  
· 30MB of hard disk space for Twain driver and image application  
· An available serial port for downloading your images. (Unless you prefer to  
use a CF reader).  
· A CD-ROM drive to load the application software.  
· A color display/monitor capable of displaying 800 x 600 x 24-bit color. If  
your display is only capable of 640 x 480, you way not be able to see the  
entire Twain driver interface. If your monitor is set to less than 24 bit  
(256 color, or 16 bit) your images will appear dull and colorless.  
Note: The ViviCam 2750 Twain driver works only under Windows 95/98, and not  
Windows 3.1 or 3.11. However, the ViviCam 2750 images (JPG files) are readable  
under Windows 3.x applications. Therefore Windows 3.x users may be able to find  
a CF reader that runs under Windows 3.x.  
Getting to know the camera  
1 Macro/Normal Mode switch  
2 Icon Display mode  
3 Multiple Image Display  
4 Shutter Button  
5 Erase  
6 Menu (advanced functions)  
7 Play/Record  
8 Power (On/Off)  
9 Optical View Finder  
10 LCD Image Display On/Off  
11 Forward/Self-Timer  
12 Backward/Flash  
13 LCD Display  
14 Green LED (Power/Processing)  
 
Using the camera  
Power Supply  
The ViviCam 2750 camera uses standard AA Alkaline, NiCD, NiMH, or renewable  
alkaline batteries. You may also use an optional AC power supply that lets you  
use household AC current.  
Installing Batteries  
1. Invert the camera and place your thumb on the battery door.  
2. Slide the battery door away from the camera as indicated by the directional  
arrow.  
3. Insert the batteries as indicated on the inner side of the battery door. When  
you close the battery door, the “+” signs should fall in contact with top of the  
batteries, and the “-” signs should contact the bottom of their respective AA  
cells.  
Notes:  
· If you are not going to be using the camera for an extended length of time,  
remove the batteries to prevent leaks or corrosion.  
· Never use manganese batteries.  
· Do not mix old and new batteries.  
· Low temperatures (below 32 F) may reduce the output efficiency of batteries,  
shortening their operational life.  
· The recommended battery types are AA Alkaline, Nickel-Metal Hydride (NiMH)  
rechargeable batteries, or rechargeable/renewable alkaline.  
· Note: When you remove alkaline batteries from a digital camera, do not  
dispose of them hastily. Digital cameras deplete AA batteries quickly, but  
not completely. Studies have shown that batteries, which appear “dead” to a  
digital camera, are still more than adequate for most other consumer  
electronic devices. Try it and see!  
· If you must dispose of your old batteries, please exercise environmentally  
correct means of disposing, or recycling them.  
Battery Life Indicator  
When the camera has sufficient power, the Low-Power icon (LCD display) will  
remain dark. When the battery power becomes low, the Low Power icon will  
illuminate to indicate that the batteries are depleting and need to be replaced.  
When battery power is low, avoid using the Flash (or Auto-Flash) feature.  
Generally, once the Low Power icon comes on, you will have ten more minutes of  
operation time. When the batteries are extremely low, the image LCD will appear  
only briefly when you attempt to turn it on, and then it will go dark almost  
immediately. Ultimately, the batteries will deplete to the point where the  
camera will not turn on.  
Note: If the batteries are very low, and the camera does a total shutdown  
during the image processing and storage function (while saving am image), that  
image will most likely be lost.  
 
Flash Memory  
The camera features 2 MB (Megabytes) of internal memory for storing images.  
This memory, called “Flash Memory”, in non-volatile. This means that the memory  
does not require electrical power to retain images. Therefore, you will not  
loose your images when the camera is turned off, if you change batteries, or if  
you remove batteries for a period of extended storage. If the batteries go  
dead, simply insert a new set of batteries, or connect the optional AC power  
supply and you will be able to retrieve and view the previously captured images.  
The only exception is if the power actually goes off as an image is being saved.  
In that case, only the “image in process” will be lost.  
Extended Flash Memory  
You may extend the memory capability of your camera by adding a Compact Flash  
Memory card. This card is a removable “ATA-compatible” memory device that gives  
your camera additional memory. For each additional 2MB you can take 32 extra  
images in Normal-Quality mode, or 16 pictures in High-Quality mode. Think of CF  
cards as simply “digital film.” (Reusable, no less.)  
To insert a Compact Flash Memory card, invert the camera, and open the long,  
narrow card slot door on the bottom of the camera by sliding the door in the  
direction of the arrow. Now, look at your CF card and locate the one edge with  
about fifty tiny holes. This edge will go into the CF slot to engage the pins  
inside the camera. Position the card so that the face of the CF card faces  
opposite the front face of the camera itself. Insert the CF card until it makes  
a gentle snap. Notice how the CF eject-button appears, and rises to a level in-  
line with the top of the properly inserted and seated CF card. Have no fear. If  
you have the card upside down it will simply not insert due to the protective  
guardrails. Of course, never use excessive force with the CF card. Finally,  
close the card slot cover and the camera memory is adjusted automatically. As  
soon as a CF card is inserted, the camera will use the CF memory for storage and  
playback functions.  
To remove the card, open the CF door and push the eject button. You may wish to  
use the tip of a key, or similar object to help press the small eject-button.  
One word of caution, however. Do not insert or remove a CF card while the  
camera is On or in the process of storing an image. You may potentially  
destruct the CF card or camera. Always power off before adding or removing a CF  
card.  
Using the Optional AC Power Adapter  
To operate the camera using standard AC power, use the optional 6.0 VDC/2.5 Amp  
AC Adapter.  
· Always be sure to use the correct AC adaptor. This power supply provides 2.5  
Amps of regulated 6 VDC. Any other adaptor may cause damage to the camera  
that is not covered under the warranty.  
· Grasp the plug, not the cord, when unplugging the adapter from a wall socket.  
· If the power cord is damaged (exposed wires, etc.), replace it immediately.  
Use of a damaged cord may cause fire or electrical shock.  
 
Power Management - Auto Power Off  
Your camera is designed to automatically power-down (turn-off) after a specific  
time interval after which no camera operations have been invoked. The factory  
setting will typically be set in the range of 90 to 120 seconds. This is a  
power-saving feature. If you are using rechargeable batteries, and you wish to  
extend the automatic power-down interval, you may adjust the power-down interval  
up to 99 minutes by pressing the Menu button (button 6) as described later in  
this manual.  
Note: If you are using an AC power adapter, the camera will sense the presence  
of the adapter and the automatic power-off feature will be temporarily disabled  
and the camera will stay on indefinitely.  
Note: Auto power-off is an automatic power saving feature. You need not wait  
for the camera to turn itself off, however. If you are done using the camera you  
may manually turn off the camera (button 8) and further increase the life of  
your batteries.  
Taking Pictures (Images) -  
1. Turn the camera on by pressing the Power button (button 8) for at least one  
second. When the camera is powering-up, you will see a small green LED light  
(item 14) just to the right of the optical viewfinder. This green LED will flash  
five to seven times. When this LED turns to a steady, solid green the camera is  
On, and ready. Note that the image LCD does not come on. This is another  
component of the power management system. The LCD image display is the single-  
most consumer of battery power. If you would like to use the LCD display, you  
can turn it on by pressing the Display button, (button 10).  
2. Adjust the lens. Set the lens (slide switch 1) to “Normal” (The icon with  
the person & mountain) if your subject is 15 inches, or more, from the camera.  
For shooting close ups (5 to 15 inches) switch the lens (slide switch 1), to the  
Macro setting (flower icon). If you are unsure as to which setting is ideal for  
your shot, turn on the LCD image display and use the live preview feature and  
try both settings.  
3. Take a picture, simply by pressing the shutter button (button 4), just like a  
traditional camera. As the camera processes and stores the image the green LED  
will flash for approximately ten seconds. When the LED returns to solid green  
you are ready to take the next image. You may use either the optical viewfinder  
of LCD image display to frame and compose your images.  
4. If you are using the LCD display while capturing images, you will see the  
image you just captured during the storage interval. The LCD screen pauses, and  
presents a static copy of your image while the camera saves it to memory. As  
soon as the image is stored, the LCD will return to live-preview.  
5. At this point you may take another image, or you can switch to playback mode  
(button 7) to review your images. When memory is full, the green LED will flash  
quickly (once per second) and continually.  
 
Using the LCD Display  
Using the built-in image Liquid Crystal Display (LCD – feature 13), you can view  
pictures immediately after capturing them. The following section describes how  
to use the LCD and its various functions.  
Note: You need not activate the LCD to capture images. Using the LCD  
continually will dramatically shorten the life of your batteries.  
Note: You will notice a number of “info icons” on your images. In order to  
review your images without all the informational detail, you may turn-off the  
info icons from the LCD display, by pressing the Icon mode button (button 2) on  
top of the camera. Pressing button 2 again will return the info icons.  
Adjusting LCD Brightness  
The brightness of the image LCD display is adjustable. To adjust the brightness  
of the LCD, invert so that the bottom side is facing up. Notice a small wheel  
(dial) in the center of the camera’s bottom panel. Turning the dial with a small  
coin will adjust the brightness up and/or down.  
Note: Increasing the LCD brightness uses more battery power.  
Viewing Your Images on the LCD – Three steps  
To review your stored images, follow these three steps.  
1. Turn on the camera (button 8), turn on the LCD (button 10), and press the  
Play/Record button (button 7) to switch to Play mode. The LCD display warms up  
and then displays the last image taken. If there are no pictures in the camera,  
the camera will simply display the message “No picture”.  
2. You may scroll through pictures in memory by pressing the Forward (button 11)  
or Backward button (button 12).  
3. To turn off the LCD image Display, press button 10 again, or allow the  
camera’s auto power-down feature to automatically power-down the camera after  
the specified time interval.  
Viewing Multiple Images (Thumbnails) -  
In addition to previewing single frames on the LCD screen, you may view a mosaic  
of nine small “thumbnail” images of the pictures in storage memory. This gives  
you the opportunity to quickly navigate the images you have stored, rather than  
having to scroll through each image individually in sequential order.  
To view thumbnail images (nine at a time):  
1. Turn on the camera (button 8), turn on the LCD (button 10), switch to Play  
mode (button 7), then press the multiple image display button (button 3).  
2. Now you are in the Thumbnail mode. If there are more than nine images in  
memory, use may scroll through the thumbnails by pressing Forward (button 11) or  
Backward (button 12). When you reach the first or last thumbnail in a set of  
 
nine, and press Forward or Backward again you will go to the next “page” of  
thumbnails.  
3. To return to single image review, press the Multiple Image Display button  
(button 3) again. Whichever image was currently highlighted (bracketed) in  
thumbnail mode will be the first image to appear in the LCD display as you  
return to single image review.  
Menu Mode  
To enter the Menu Mode, turn on the camera (button 8), turn on the LCD (button  
10), and then press the Menu button (button 6). The LCD image will now display  
the built-in function menus containing more options and camera features. To use  
these functions select the one you want to engage by using the Forward or  
Backward buttons (buttons 11 and 12) and then press the Shutter button (button  
4). Details of each feature are discussed below.  
The seven functions available in Menu Mode are:  
· Move To Card - Copy the images in the internal memory to the Compact Flash  
Card. (Assumes a CF card is inserted into the card slot.) Note: This  
function is actually “Copy to Card”. After you move the images from internal  
memory to a CF card, the “originals” are still in the internal memory. In  
the sense, this is a copy function.  
· Erase All - Erases all the images from both internal Flash Memory and the CF  
Memory Card. Before the erasure is completed, you will be prompted for  
confirmation.  
· Set Date/Time - Allows you to set the time and date that appear on your  
images. Use the Shutter button to increase the entry in a selected field.  
Use the Forward or the Backward buttons for navigation, to select a field.  
After entering year, month, day, hour, minute, and second, use the Forward  
button to advance to “OK”. Finally, select OK by pressing the shutter  
button; or Forward to the “Exit” icon to return to the main menu without  
saving changes.  
Note: After you adjust the time and press OK (Shutter button), and the  
batteries are getting low, the camera may power-off. When you turn the  
camera on again, it should display the newly set time and date.  
Note: The ViviCam 2750 date display is Y2K compliant. It will change from  
“99” to “00”.  
· Auto Power Off - Allows you to specify the interval for automatic shut off.  
Press the Shutter button to adjust the auto power-down time interval. Select  
the OK icon to accept the setting or select the Exit icon to return to the  
main menu without making changes. You may adjust the interval up to 99  
minutes.  
· Auto Play - Defines the interval between images when sequentially viewing  
them on the LCD screen. Press the Shutter button to increase the auto-play  
interval. Select OK to accept the setting or Exit to return to the main  
menu. If no value is set you must manually scroll images in Play mode using  
either the Forward or Backward buttons.  
· Image Quality - Toggles between Normal- and High- image quality modes. With  
2-MB internal memory, Normal allows you to capture at least 32 images, while  
High (also known as Fine) allows you to capture at least 16 images. Note the  
difference between resolution and image quality. All ViviCam 2750 images are  
captured at a resolution of 640x480 pixels. The difference between Normal  
 
and High is image quality. The Normal Quality images are compressed more  
than the High Quality images. As such, the Normal Quality images require  
less image storage space per image, whereas the High Quality images will have  
a better image quality.  
· Lock/Unlock - Allows you to lock the currently displayed image so that it can  
not be erased. You can unlock images that are currently locked.  
Note: Using the Twain driver User Interface, you may make these same changes  
with your mouse and keyboard, while the camera is connected to your PC.  
Erasing Images from Memory  
The Erase button (button 5) allows you to remove an unwanted image from memory.  
You may erase images from either internal memory or from a CF card that is in  
the camera. To remove images, the LCD image display must be on.  
1. Turn on the camera, turn on the LCD display, then press the Play/Record  
button and go to the Play mode.  
2. To remove images individually, scroll to the picture then press the erase  
button (button 5). A small dialog box will appear and ask you to confirm the  
deletion. Press the Forward button (button 11) to acknowledge “Yes”, or the  
Backward button (button 12) to decline (No). You will then be prompted to  
delete the next image. When you are done erasing, exit to the LCD preview  
screen by pressing the Backward button (No).  
3. To erase all images in memory at once (as opposed to each, individually),  
press the Menu button (button 6). When the Menu-options screen appears, advance  
to the Erase-All icon, which is the second icon, in the top row. Press the  
shutter button. You will be presented a small dialog box that asks you to  
confirm your choice to delete all images. Select “+” to erase all, or “-” to  
exit without erasing. Erasing all images will erase images from both internal  
and CF card memory.  
Note: Once your images have been erased, they are gone. Not even our customer  
service or factory repair can retrieve them.  
Defining Image Quality  
The ViviCam 2750 can capture images in two different quality modes: Normal  
(compressed) and High (less compressed). Both modes capture images at 640 x 480  
resolution. With 2-MB internal memory, Normal Quality allows you to capture at  
least 32 images, while High Quality allows you to capture at least 16 images.  
Note the difference between resolution and image quality. In either mode the  
resolution (pixel count) is 640x480 pixels. The difference between Normal and  
High is image quality. The Normal Quality images are compressed more than the  
High Quality images. As such, the Normal images require less image storage  
space per image, whereas the fine images will have a higher image quality.  
To select image quality:  
1. Power on the camera, turn on the LCD, and press the Menu button (button 6) to  
display the menu options in the LCD display.  
2. Use the Forward button (button 11) to cycle through the options to the second  
icon, in the bottom row, which is the Quality icon.  
 
3. Press the Shutter button to change the Quality setting. The shutter button  
“toggles” back and forth between “High Quality” and “Normal Quality”.  
Using the Built-in Flash  
The ViviCam 2750 has three different flash modes: Auto (the default mode), On  
(Fill), and Off. Each of these modes can be accessed via the Flash button  
(button 12) on the back panel of the camera.  
· Auto - The camera automatically determines if it must fire the flash when the  
brightness of the subject, or scene, is too low.  
· On (Fill) - Fires the flash regardless of the brightness levels. However,  
the intensity of the flash varies according to the ambient brightness, so the  
more light in the area, the lower level of the flash. This essentially forces  
the flash to fire each time to press the shutter.  
· Off - The flash is disengaged regardless of ambient brightness.  
Note: Sometimes Flash On is called Fill. It can be useful to have the flash  
bulb fire in situations of high contrast or heavy shadows in order to “fill-in”  
light in those portions of the scene.  
Using the Self-Timer  
The Self-Timer is useful for creating a delay between the time you press the  
shutter and the time the picture is taken. You can activate the self-timer by  
pressing the Forward button (button 11) at anytime in capture mode. If timer-  
mode has been selected, each time you press the shutter button there will be a  
ten second delay. This delay is marked by flashing the Red Self-Timer LED once  
per second for seven seconds, then twice per second for the last three seconds.  
This Red LED is on the front face of the camera near the lens.  
Memory Full  
Once you have filled image memory with images, you must erase some before  
capturing new ones. To save your images permanently, transfer them from the  
camera to your PC. When the camera memory is full, the green LED (item 14) will  
flash once per second. Also, the image LCD screen displays a “STORAGE FULL”  
message.  
Connecting to Your Computer/Installing Capture Software -  
In order to connect your ViviCam 2750 to your PC you must connect the hardware  
and install the software (driver and image application). PC system requirements  
are discussed earlier in this manual in the section entitled “System  
Requirements”, and the software content is discussed in the section entitled  
CD-ROM or Diskette Contents”.  
Software Installation –  
1. Install the Twain driver. Insert the first driver disk, number one, into your  
floppy disk drive. From Windows 95/98 select Start, Run, type a:\setup, Enter  
(or OK). Then follow the screen instructions and insert disk two (if  
applicable) when prompted.  
 
2. Install the application software. Insert the CD-ROM into your CD-ROM drive.  
From Windows 95/98 select Start, Run, type d:\setup, Enter (or OK). (If your CD  
drive is identified by a drive letter other than d:, use that letter in place of  
the d) Follow the screen instructions to complete the installation.  
Hardware/Physical Installation -  
1. If you plan to connect to your PC by serial connection, plug the included  
serial data cable into an available 9 pin COM port on the back of your PC. These  
ports are located at the back of your computer. Look for a connector that is D-  
shaped, has two rows of (male) pins, with a total of nine pins. Most desktop  
computers have two COM ports, whereas most notebook computers have one COM  
connector. While most desktops have two serial ports, many times your mouse, or  
possibly an external modem will occupy one of them. It is further possible that  
your computer may have a 25 pin male serial connector. If this is the case, you  
may purchase a 25F to 9M at a local electronics or computer store.  
Note: Do not purchase a “null modem” to use as a 25 to 9 adapter.  
2. Open the data port door on your ViviCam 2750, and connect the molded-green  
stereo mini-jack plug into the camera. Plug it into the port marked “digital”.  
Making the Connection -  
Now that your driver, application, and cables are installed, the final step is  
to make the camera-to-PC connection.  
1. Turn on your camera.  
2. Launch (Start) your image editing application software. (Start, Programs,  
MGI…)  
3. After your application is up and running, perform the following steps. (In  
the following case MGI PhotoSuite SE is used as an example. Other Twain  
programs are similar but not exactly the same.)  
Connecting for the first time – Selecting the Source -  
a. From within MGI PhotoSuite, select File, Get Photos From, Select Source.  
b. A dialog box will appear which lists all Twain hardware installed on your  
PC.  
c. Select either “Digital Camera 640 x 480 driver”, or “ViviCam 2750”  
d. Note: this step only needs to be performed once. If however, you return  
to MGI and use it with some other Twain device, you must tell MGI which  
device you are currently using. If you do not own or use multiple Twain  
devices then this step only needs to be done once.  
Downloading your Images – Routine Downloading –  
a. From within MGI PhotoSuite, select File, Get Photos From, Camera/Scanner.  
b. The ViviCam 2750 Twain driver interface will now appear.  
c. The ViviCam 2750 Twain Driver User Interface is designed to be intuitive  
and self-explanatory. For additional help or detailed explanation, refer to  
the help files available from the driver screen. You may also print  
sections of the help files for later reference.  
 
d. Downloaded images will be stored to your computer’s hard drive, where you  
can later print them out, edit them in imaging software, and even email  
them.  
e. The camera’s digital output connector will automatically transmit data at  
varying baud rates, depending upon the capabilities of your computer. If the  
camera, while attached to your computer, remains inactive for a given length  
of time, it shuts down automatically.  
Note: When downloading your images, make note of where they are being saved.  
Record the “path” to the directory or folder where your images are being saved.  
This is an essential key to finding your images again.  
Connecting a digital camera to a PC is perhaps the most challenging (sometimes-  
frustrating) aspects of consumer digital imaging today. If your camera and PC  
will not connect then your serial ports must be examined. You can inspect your  
computers ports using the device Manager Tab of the Windows (Start, Settings,  
Control Panel, System, Device Manager.) For assistance in enabling or setting  
your ports, consult your PC system manual or manufacturer. In some cases,  
changes may need to be made to your System BIOS. Please consult a knowledgeable  
PC expert before attempting any such changes or modifications.  
Video Interface –  
The ViviCam 2750 is capable of two types of output. In addition to the PC  
connection described above, you may also connect to a TV/monitor with NTSC. On  
the left side of the camera you will find three ports: NTSC video output, serial  
digital data output, and DC IN (6 VDC input).  
The video output connector allows you play stored images (640x480), or live  
video to a standard television monitor. Note, however, when the LCD monitor is  
off, the camera will not output video via this port. To transmit stored images  
to your television or VCR attach the yellow-moulded end of the video cable to  
the video port of the digital camera, attach the other end to the “Video In”  
port on your television or VCR, and power on the camera and turn the on the LCD.  
Refer to your TV or VCR manuals for specific details on making a video  
connection to your video-ready device.  
Appendix 1: LCD Icons  
The following is a summary definition of the information icons that may appear  
on the LCD image display.  
Fill Flash (Always on)  
No Flash  
Auto Flash  
Self-Timer on  
Full battery power  
Half battery power  
Low battery power  
Locked file (cannot be erased)  
Fine/High Quality mode  
 
Normal Quality mode  
Copy images to memory card  
Erase all images in camera memory  
Erase one image from camera memory  
Set time and date  
Set auto power-off time interval  
Set auto play  
Exit  
Confirm  
Images are being stored to internal memory  
Images are being stored to Compact Flash Card  
 
Appendix 2: Record Mode Icons  
The following is a summary definition of the icons found in the LCD display  
screen while in record mode:  
Number of Pictures remaining (estimate)  
Current date  
Battery warning  
Quality Mode (  
Self-timer  
-is Normal; -is High/Fine)  
Flash (Auto/Fill/Off)  
Appendix 3: ViviCam 2750 Specifications  
Image Sensor: 1/4" CCD, 350,000 pixels  
LCD Display: 1.8" color display with 15 fps live display  
Image Resolution: 640 x 480 pixels  
Color: 24-bit (16.7 million colors)  
Memory: 2MB internal flash memory  
Storage (Internal memory): 16 images High, 32 images Normal  
Data compression: JPEG  
File format: JPG  
Lens: Normal: 15 inches to infinity, Macro: 5 to 15 inches  
Flash Modes: Automatic, Fill/On, Off  
Shutter Speed: 1/30-1/10000 sec (Auto)  
Connectors: AC adaptor, RS232 serial port, NTSC video output port  
Weight: 0.67 lbs (with batteries)  
Dimensions: (W) 1.9" x (L) 5.1" x (H) 2.7”  
Additional Memory Capability: Compact Flash card slot for up to 32 MB CF card  
Design and specifications are subject to change without notice.  
 
Warranty Policy  
This camera is under warranty for a period of one year from the date of  
purchase, by the original purchaser. In case of defects in materials or  
workmanship, Vivitar Corporation will repair or replace the camera free of  
charge within the warranty period. This warranty applies to the camera only.  
This warranty does not include batteries, or other accessories that have not  
been manufactured by Vivitar Corporation. This warranty will not be honored if  
the camera has been mishandled or tampered with, or altered by anyone other than  
the manufacturer. Other than for the warranty herein, Vivitar Corporation is not  
responsible for loss, damage, or inconvenience of any kind.  
Prior to returning a camera, you must first obtain an RMA number from Vivitar  
Technical Support or Customer Service Operations. The RMA number, a brief  
description of the difficulties encountered, and proof-of-purchase with the date  
of purchase clearly indicated, must accompany a defective camera being returned  
under warranty. Prior to returning any product you must call Technical Support  
or Customer Service to attempt to diagnose the problem and receive an RMA  
number. All related shipping and transportation costs and insurances are at the  
owner's expense. Any alteration of this warranty cannot be made without Vivitar  
Corporation’s written approval.  
FCC Notice  
This equipment has been tested and found to comply with the limits for a Class B  
digital device, pursuant to part 15 of the FCC Rules. These limits are designed  
to provide reasonable protection against harmful interference in commercial  
installation. This equipment generates, uses and can radiate radio frequency  
energy and if not installed and used in accordance with the instructions, may  
cause harmful interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular installation. If this  
equipment does cause harmful interference to radio or television reception,  
detectable by turning the equipment in question off and on, the user is  
encouraged to try to correct the interference by one or more of the following  
measures. 1) Re-orient, or relocate, the receiving antenna. 2) Increase the  
distance between the equipment and the receiver. 3) Connect the equipment to an  
outlet on a different circuit than that which the receiver is connected to. 4)  
Consult your dealer or an experienced radio/TV technician for help.  
CAUTION  
Do not place this camera in a damp or dusty location. This may cause a fire or  
electric shock.  
Do not place this camera in a location affected by oil fumes or steam, such as  
near a cooking stove or humidifier. This may cause a fire or electric shock.  
Do not leave this camera in places subject to extremely high temperatures, such  
as in a sealed vehicle, or in direct sunlight. Exposure to high temperatures  
may adversely affect the camera case and internal components and cause a fire.  
Do not cover or wrap the camera or the optional AC power adapter with a cloth or  
quilt. This may cause heat to build up and distort the case, or cause a fire.  
Always use the camera and its accessories in well-ventilated locations.  
 
Take care that the camera is not dropped, or exposed to severe mechanical shock  
when it is being moved. This may cause the camera to malfunction.  
If you are using the optional AC power adapter, do not move the camera while it  
is switched on. Unplug the adapter from the AC power outlet after you have  
switched off the camera. Then ensure that connector cords or cables are  
disconnected before moving the camera. Failure to do so may damage the cords or  
cables and cause a fire or electric shock.  
When handling the camera, always unplug it from the AC power adapter for safety.  
If you are using an AC power adapter, unplug the adapter from the AC power  
outlet after you have disconnected the camera. Failure to do so could result in  
an electric shock.  
When leaving the camera unused for long periods always unplug the camera from  
the AC power adapter for safety. If you are using an AC power adapter, unplug  
the adapter from the AC power outlet after you have disconnected the camera.  
Failure to do so could result in a fire.  
Do not use batteries other than those specified for use with your camera.  
The use of unsuitable batteries may result in the batteries splitting or leaking  
and causing a fire, injury, or soiling of the battery compartment.  
When fitting a battery into the camera, check the polarity markings on the  
battery to ensure that you insert the batteries correctly. Incorrect battery  
polarity may result in the batteries splitting or leaking and causing a fire,  
injury, or soiling of the battery compartment.  
Remove the batteries if the camera will not be used for an extended period of  
time. The batteries may leak and cause a fire, injury, or soiling of the battery  
compartment. If the batteries leak, clean and wipe the battery compartment  
carefully and install new batteries. Wash your hands carefully if you touch the  
battery fluid.  
WARNING  
Do not use this camera if it is emitting smoke, is unusually hot to the touch,  
is emitting any unusual odor or noise, or is in any other abnormal state. Use of  
the camera in any of these situations may cause a fire or electric shock. Stop  
using the camera immediately, turn the camera off, and then disconnect the power  
source (batteries or AC power adapter). (If you are using the AC power adapter,  
unplug the adapter from the AC power outlet after you have disconnected the  
camera.) After checking that smoke is no longer being emitted, contact your  
dealer or your local authorized service facility and request repairs. Never  
attempt to repair this camera yourself, as this is dangerous.  
Do not use the camera if any water has entered the camera. Switch the camera  
off, and then disconnect the power source (batteries or AC power adapter). (If  
you are using the AC power adapter, unplug the adapter from the AC power outlet  
after you have disconnected the camera.) Then contact your dealer or your local  
authorized service facility. Do not continue to use the camera as this may cause  
a fire or electric shock.  
Do not use the camera if any foreign objects have entered the camera. Turn the  
camera off, and then disconnect the power source (batteries or AC power  
adapter). (If you are using the AC power adapter, unplug the adapter from the AC  
 
power outlet after you have disconnected the camera.) Then contact your dealer  
or your local authorized service facility. Do not continue to use the camera as  
this may cause a fire or electric shock.  
If the camera has been dropped or the camera case has been damaged, switch the  
camera off, and then disconnect the power source (batteries or AC power  
adapter). (If you are using the AC power adapter, unplug the adapter from the AC  
power outlet after you have disconnected the camera.) Then contact your dealer  
or your local authorized service facility. Do not continue to use the camera as  
this may cause a fire or electric shock.  
Do not place the camera in unstable locations such as on a wobbly table or  
sloping surface where the camera may fall or tip over and cause injury.  
Take care that the camera is not exposed to moisture, and that water does not  
get into the camera. Take particular care when it is raining or snowing or when  
you are using the camera at the beach or near water. Water in the camera may  
cause a fire or electric shock.  
Do not insert or drop metallic or inflammable foreign objects into the camera  
through access points such as the Compact Flash card slot. This may cause a fire  
or electric shock.  
Do not attempt to modify this camera. This may cause a fire or electric shock.  
Do not remove the camera casing. This may cause an electric shock. Your dealer  
or local authorized service facility should carry out internal inspection,  
maintenance and repairs.  
Do not use this camera in the bathroom or near water, especially with the AC  
adapter. This may cause a fire or electric shock.  
Do not touch the power plug during a thunderstorm if you are using the AC power  
adapter. This may cause an electric shock.  
Never use this camera, look through the viewfinder, or watch the LCD (liquid  
crystal display) while you are operating a moving car, motorcycle, or bicycle.  
This may cause a traffic accident.  
Do not attempt to charge standard alkaline batteries. This may cause the battery  
to split or leak causing fire or injury.  
Do not carry or store a battery with objects such as metal pens, necklaces,  
coins or hairpins. This could short-circuit the positive and negative poles of  
the battery. This could cause the battery to split or leak, resulting in fire  
or injury.  
Do not heat, or attempt to disassemble a battery, and do not place a battery in  
water or in a fire. Any of these situations may cause the battery to split or  
leak, cause fire or injury.  
Do not subject a battery to strong impacts, such as hitting it with a hammer,  
stepping on it, or dropping it. Any of these may cause the battery to split or  
leak causing fire or injury.  
Use only the specified batteries or AC power adapter specified for use with this  
camera. The use of other power sources may cause a fire.  
 
V2750 “Out-of-Box” Guide –  
ViviCam 2750 – Helpful hints  
1) First. Charge your batteries. Your new ViviCam 2750 is supplied with 4 AA Nickel-  
Metal Hydride (NiMH) rechargeable batteries. Charge them overnight for best  
performance. These NiMH rechargeable batteries should last for many charge  
cycles. If you would like to get started right away you can use four standard AA  
alkaline batteries.  
2) Read the Quick Start and Owners Manual. These were carefully written to help you  
get the most out of your new camera. Advanced users can get started with the  
Quick Start. Newer users may prefer to read the Owner’s Manual. You can read  
these while the batteries are charging.  
If You are Having Difficulties. If your ViviCam 2750 does not appear to work properly, please….  
DO NOT RETURN IT TO THE STORE - for technical assistance.  
For technical assistance consult our website at www.vivitar.com.  
You may also call our technical support line for assistance. (See other side)  
Before you call, please…  
1) Review the Owner’s Manual and Quick Start guide.  
2) Determine if your problem is related to your camera, or your computer connection.  
·
Check the camera for basic operations.  
·
·
Does it turn-on?  
Can you take a picture, and review it on the LCD display?  
If the camera operates, captures images, and displays images on the LCD, the camera is functioning correctly.  
·
If you cannot get your camera and PC to connect, please consult your PC manufacturer, or consult a local  
PC technician and have your serial (COM) ports checked. Our technical support staff can help you with  
your camera, but are not able to give expert advice regarding the configuration  
of your PC.  
We offer toll-free technical support for thirty days. Technical Support is  
available 24 hours a day, 7 days a week. We offer free support for a period  
of 30 days, limited to three calls. You may reach technical support at (800)-532-3286. After  
thirty days, or three calls, you may obtain assistance by calling (949)-595-2199.  
You may also obtain support via our website at www.vivitar.com. On our website we post driver updates, frequently  
asked questions, and other helpful information. There is also a knowledge-based help system to guide you through  
any problems and questions you may have.  
 
DIGITAL PRODUCTS  
Original Purchaser's  
Name:______________________________________________________  
Address:_____________________________________________________________________  
City: __________________________ State: _______________Zip Code: ________________  
Telephone: (  
)____________________________________________________________  
Occupation: _________________ Age: oUnder 18; o18 - 30; oOver 30_________  
Serial Number: _______________________________________________________________  
Date of Purchase: ________________Purchase Price: _____________________________  
Invoice Number: ______________________________________________________________  
Purchased From: _________________Telephone: __________________________________  
Address: _____________________________________________________________________  
City: __________________________ State: _______________Zip Code:  
_________________  
How did you hear about Vivitar? oSalesperson  
oOther: ____________________  
Advertising/Editorial (Name of Publications)___________________________________  
Warranty Card must be filled in completely and returned to Vivitar Corporation within 14 days to  
validate warranty.  
-----------------------------------------------------------------------------------------------------------------------  
Warranty Claims  
All claims under warranty must be made promptly after occurrence of problem, and received  
within the applicable warranty period by Vivitar. Before you can return any equipment for repair,  
you must obtain a return authorization number (RMA#) and instructions as to how and where  
said equipment should be shipped. RMA numbers are only valid for 14 days from the date of  
issuance. Any merchandise received after this time or without the RMA # will be refused. Vivitar  
reserves the right to reject any non-acceptable means of transportation. When equipment is  
returned for any reason, the sender shall be responsible for all damage resulting from improper  
packing or handling, and for loss in transit, not withstanding any defect or nonconformity in the  
equipment. In all cases, Vivitar has sole responsibility to determine the cause and nature of said  
problem, and said determination with regard thereto shall be final.  
To contact us:  
Instructions for a return:  
Vivitar Corporation  
call us for a RMA#  
1280 Rancho Conejo Blvd.  
Newbury Park, California 91320  
purchase  
Put RMA# outside of packaging box  
Enclose copy of proof of  
(800) 532-3286 Technical Support  
(949) 595-2199 Technical Support  
(805) 498-7008 x109 Customer Service  
Enclose product description  
Ship package prepaid and insured  
(We do not accept C.O.D. shipments)  
Call Technical Support for any technical questions - If you wish to obtain an RMA# for product service,  
Call customer service for warranty or non-warranty repairs, and spare or replacement parts.  
 
Place  
Stamp  
Here  
Vivitar Corporation  
1280 Rancho Conejo Blvd.  
Newbury Park, California 91320  
Attn: Customer Service Department  
-----------------------------------------------------------------------------------------------------------------------  
Limited One Year Warranty  
Vivitar warrants each product sold to be free from defects in material and workmanship in accordance with  
the terms outlined below. Vivitar's obligation under said warranty continues for a period of twelve (12)  
months from the date of purchase, by the original purchaser. The warranty period shall begin upon  
acceptance of the Product. Upon acceptance of product the provisions stated in this warranty shall govern  
all Customers’ remedies.  
Replacement or repair of defective parts or products shall be at the sole and exclusive discretion of Vivitar  
and performed only at Vivitar or by an authorized repair facility. Defective products being returned to Vivitar  
for warranty must arrive freight prepaid and said freight shall be non-refundable, unless otherwise agreed  
upon by Vivitar and authorized in writing. In-warranty period, replacement parts are warranted only to the  
remaining, unexpired portion of the original warranty period applicable to the repaired or replaced parts.  
This warranty only applies to parts and labor provided by the Seller under valid warranty claims, and is  
contingent upon proper use of the Product. Vivitar shall not be liable for any damage to products resulting  
in whole or in part from use of components, accessories, parts or supplies not furnished by Seller or which  
do not meet Vivitar's specifications. This warranty does not apply to any computer hardware product, which  
does not bear a serial number.  
All obligations of seller under this warranty shall cease, if any of the following occur: (1) Products are subject  
to accident, abuse, alteration, unusual physical and electric stress, neglect, misuse, or any other  
uncontrollable causes; (2) Adjustment, repair or parts replacement not within Vivitar's specifications; (3)  
Repair or replacement of any parts, by any party other than Vivitar or its authorized service centers.  
This warranty supersedes any and all previous warranties, expressed or implied. Non-company  
representatives are not authorized or permitted, at any time, to make any warranty claims or assume any  
additional liability not in strict accordance with the above outlined warranty.  
 
Quick Start Guide –  
 

Tatung Cooktop TICT 1300W User Manual
Technicolor Thomson DVD Player IB5400GB User Manual
Tektronix Telescope 1502C User Manual
The Singing Machine Karaoke Machine cd+g and mp3 g karaoke system with synchronizing disco lights User Manual
Trane Heat Pump DC UC WEB01 User Manual
Triarch Fan CF 3000 User Manual
Tripp Lite Network Cables N201 010 WH User Manual
Ultra electronic Boiler 80 User Manual
Varimixer Mixer W30A User Manual
Wagner SprayTech Pet Fence DTS 5800 User Manual