Vita Mix Blender NA User Manual

CERTIFIED RECONDITIONED -  
NEXT GENERATION - PROGRAMMED  
Owner’s Manual  
Read and save these instructions  
Vita-Mix® Corporation  
8615 Usher Road  
* Product image may differ slightly from  
your configuration  
Cleveland, OH 44138-2103 U.S.A.  
1.800.848.2649 / 1.440.235.4840  
vitamix.com  
 
LET’S GET STARTED  
Congratulations!  
You are about to see how quick, easy, and delicious healthy eating can be!  
Please read all the safety information, warnings, and instructional material found  
in this booklet before getting started. Set your Vitamix machine on a dry, level  
surface. Make sure that the power switch is set to Off, and that the machine is  
plugged into a grounded electrical outlet. Then, follow the cleaning instructions  
on page 22 to prepare your machine for use. Always clean your machine before  
the first use.  
3
 
SERVICE AND REGISTRATION  
Vitamix Service  
Record the model number and serial number of your Vitamix in the spaces  
provided below for future reference. These numbers can be found on the back of  
the motor base.  
Model Number  
Serial Number  
Date of Purchase  
Purchased From  
Before returning this product for any reason, including repair, first contact Vitamix  
Customer Service at 1.800.848.2649 or 1.440.235.4840, email service@vitamix.  
com, or contact your local dealer.  
Product Registration  
Your reconditioned Vitamix® machine was purchased directly from the Vita-Mix®  
Corporation. Your product was registered at the time of purchase and the machine’s  
warranty has been activated.  
4
 
IMPORTANT SAFEGUARDS  
WARNING: To avoid the risk of serious injury when using your  
Vitamix® blender, basic safety precautions should be followed, including  
the following.  
READ ALL INSTRUCTIONS, SAFEGUARDS, AND  
WARNINGS BEFORE OPERATING BLENDER.  
1. Read all instructions.  
2. Not intended for use by or near children or persons with reduced physical,  
sensory, or mental capabilities or lack of experience and knowledge. Close  
supervision is necessary when any appliance is used by or near children or  
incapacitated persons.  
3. To protect against the risk of electrical shock, do not put the blender base in  
water or other liquid.  
4. Unplug from outlet when not in use, before putting on or taking off parts, and  
before cleaning.  
5. Avoid contacting moving parts.  
6. Do not operate any appliance with a damaged cord or plug or after the  
appliance malfunctions, or is dropped or damaged in any manner. Call  
Vitamix Customer Service at 1.800.848.2649 or 1.440.235.4840 or email  
[email protected]matonceforexamination, repair, replacement, orelectrical  
or mechanical adjustment. If purchased outside the U.S.A. or Canada, contact  
your local Vitamix dealer.  
7. Alteration or modification of any part of the blender base or container,  
including the use of any part or parts that are not genuine authorized Vitamix  
parts, may cause fire, electric shock, or injury.  
8. The use of attachments not expressly authorized or sold by Vitamix for use  
with this blender, including canning jars, may cause fire, electric shock, or  
injury.  
9. Do not use outdoors.  
10. Do not let cord hang over edge of table or counter.  
11. Do not let cord contact hot surface, including the stove.  
12. Keep hands and utensils out of container while blending to reduce the risk  
of severe injury to persons or damage to the blender. A rubber scraper or  
spatula may be used, but only when the Vitamix blender is not running.  
13. The tamper provided must be used only when the main part of the lid is  
in place.  
5
 
IMPORTANT SAFEGUARDS  
14. Blades are sharp. Handle or remove blade and blade assembly from the  
container with extreme care to avoid injury. To reduce the risk of injury, never  
place a blade assembly on the motor base unless assembled to the Vitamix  
container.  
15. Do not leave foreign objects, such as spoons, forks, knives or the lid plug, in  
the container as this will damage the blades and other components when  
starting the machine and may cause injury.  
16. Never attempt to operate with damaged blades.  
17. Always operate blender with lid and lid plug firmly in place. The lid plug  
should be removed only when adding ingredients and when using the tamper.  
18. When blending hot liquids or ingredients, use caution; spray or escaping  
steam may cause scalding and burns. Do not fill container to the maximum  
capacity. Always begin processing on the lowest speed setting, variable  
speed 1. Keep hands and other exposed skin away from the lid opening to  
prevent possible burns.  
19. When making nut butters or oil-based foods, do not process for more than  
one minute after the mixture starts to circulate in the container. Processing  
for longer periods can cause dangerous overheating.  
SAVE THESE INSTRUCTIONS  
WARNING  
To Avoid Injury.  
Read and understand instruction  
manual before using this machine.  
IMPORTANT INSTRUCTIONS FOR SAFE USE  
This product is intended for HOUSEHOLD USE ONLY and is not intended to be  
used for commercial purposes.  
Do not leave your Vitamix blender unattended when operating.  
Any repair, servicing, or the replacement of parts must be performed by Vitamix  
or an authorized service representative.  
6
 
IMPORTANT SAFEGUARDS  
WARNING  
Electrical Shock Hazard.  
Use grounded outlet only.  
DO NOT remove ground.  
DO NOT use an adapter.  
DO NOT use an extension cord.  
Failure to follow instructions can cause death  
or electrical shock.  
NOTICE: THE FAILURE TO FOLLOW ANY OF THE IMPORTANT SAFEGUARDS  
AND THE IMPORTANT INSTRUCTIONS FOR SAFE USE IS A MISUSE OF YOUR  
VITAMIX BLENDER THAT CAN VOID YOUR WARRANTY AND CREATE THE RISK  
OF SERIOUS INJURY.  
7
 
PARTS AND FEATURES  
Lid Plug  
2-Part Lid  
Lid Flaps  
Blade Assembly  
Container  
Retainer Nut  
Drive Socket  
Centering Pad  
Start / Stop Switch  
Pulse Switch  
Motor Base  
Variable Speed Dial  
Tamper  
* Product image may differ slightly from your configuration  
8
 
PARTS AND FEATURES  
On / Off Switch: The On / Off (or Power) Switch is on the right-hand side of the  
machine base. The On / Off Switch controls the power to the machine.  
Start / Stop Switch: Pressing down on the Start / Stop Switch will initiate the  
blending process. Pressing down on the Start / Stop Switch again will stop the  
blending process.  
Variable Speed Dial: The center Variable Speed Dial serves two functions; the  
use of five programs or the use of ten variable speed settings.  
Pulse Switch ( ): The Pulse Switch can be used when using Variable Speeds  
or Programs.  
Container: Ounces, cups, and milliliters are clearly marked.  
2-Part Lid: The 2-part Lid is easy to put on and take off and easy to clean.  
Always use the lid and the lid plug when the machine is in operation.  
CAUTION: Lids and tampers are not interchangeable between different  
container styles, types, and sizes.  
Snap the lid onto the container and leave in place for a few minutes. Once the lid  
has been left on the container, it will be much easier to lock or remove.  
Lid Plug: Insert through the lid and secure by turning clockwise. Remove the lid  
plug to use the tamper or add ingredients.  
Tamper: The tamper allows you to accelerate the process of very thick and / or  
frozen mixtures that cannot be processed in a regular blender. Using the tamper  
maintains circulation by preventing air pockets from forming.  
WARNING  
Rotating Blades Can  
Cause Severe Injury.  
DO NOT reach into container  
while machine is running.  
9
 
PARTS AND FEATURES  
To Lock the Lid in Place: Position lid on container with lid flaps midway between  
the spout and the handle. Push the lid onto the container until it locks in place. The  
lid must always be secured when processing, especially hot liquids that may scald.  
Never operate the blender without checking to make sure the lid is securely  
locked in place.  
To Remove the Lid: Lift up on one lid flap while holding the container securely.  
To Remove the Lid Plug: Rotate the lid plug counterclockwise from the “locked” to  
“unlocked” position and lift out.  
Front  
Power Cord: Your machine is equipped  
with a long power cord. Store the  
unused portion neatly underneath.  
Bottom View / Cord Wrap: Plastic cord  
retainers hold the cord securely. They  
are flexible, and return to position after  
the cord is lifted out.  
On/Off  
Switch  
Back  
10  
 
CONTROL PANEL  
5
4
1
3
2
1. On / Off Switch: The On / Off (or Power) Switch is located on the lower  
right-hand side of the machine. The On / Off Switch controls the power to  
the machine.  
BEFORE moving the On / Off Switch to the On (I) position, make sure the  
marker on the Variable Speed Dial is pointed at the Stop Symbol ( ) at  
the top of the dial.  
After plugging in the unit, move the On / Off Switch to the On position  
to ready the machine for blending. Move the On / Off Switch to the Off  
position at night and whenever the machine will be left unattended.  
If the On / Off switch is moved to the Off position to stop a program mid-  
cycle, wait 30 seconds for power to recycle and the timer to reset before  
moving the On / Off switch to the On position.  
When the Pulse, Start / Stop, and Program Symbols brighten, the On / Off  
Switch is in the On position and power is flowing.  
2. Start ( ) / Stop ( ) Switch: After the marker on the Variable Speed Dial is  
rotated off of the Stop Symbol ( ) to either Variable Speed 1 or a Program  
setting, press the Start / Stop Switch to start the machine and initiate  
the blending process. Pressing the Start / Stop Switch again will stop the  
blending process.  
Programs can be interrupted by pushing down the Start / Stop switch  
at any time. If reactivated by pushing down the Start / Stop switch, the  
program will start at the beginning.  
11  
 
CONTROL PANEL  
CAUTION  
Never Start on Speeds Above 1 with  
Hot Liquids to Avoid Possible Burns.  
Escaping steam, splashes or contents  
may scald.  
To secure the contents, lock the lid and lid plug  
securely in place prior to operating  
the machine.  
Always start on Variable 1, slowly increase  
to 10.  
3. Pulse Switch ( ): Variable Speed: Pressing down on the Pulse Switch will  
cause the machine to blend at the speed setting shown on Variable Speed  
Dial for as long as the Pulse Switch is held down.  
Programs: The Pulse function can be used when a program is selected.  
Pushing down the Pulse switch when a program is selected will cause the  
machine to run at 50% of high power for as long as the Pulse switch is  
pushed down.  
4. Variable Speed Dial:  
The Variable Speed Dial serves two functions; the use of five programs  
settings or ten variable speed settings.  
To use programs: rotate the Variable Speed Dial to the left to the desired  
program.  
To use Variable Speed:  
a. Rotate the Variable Speed dial right to 1.  
b. Press down on the Start / Stop switch.  
c. Rotate the Variable Speed dial to the right or left during blending to  
increase or decrease the speed of the blades.  
d. At the end of the blending cycle, rotate the marker on the Variable  
Speed dial back to the Stop Symbol ( ) at the top of the dial.  
5. Programs:  
Your Vitamix is equipped with five program settings for the most commonly  
used recipes. Rotating the Variable Speed Dial left of center allows you  
to select a program for Smoothies, Frozen Desserts, Soups, Purées, and a  
Cleaning cycle. These programs are optimized for these recipe categories,  
but may also work well with other recipe choices.  
12  
 
ABOUT THE BLADES  
The Vitamix machine comes standard with the wet blade container. The blade  
is identified by a “W” for wet. This blade is used for most of your recipes.  
Additional containers with wet or dry blades may be purchased separately.  
WARNING  
Rotating Blades Can  
Cause Severe Injury.  
DO NOT reach into container  
while machine is running.  
Wet Blade Container: Designed for processing liquids,  
including juice, frozen mixtures, sauces, soups, purees,  
batters, and for wet chopping. The wet blades can also grind  
grain and knead dough, but they are not quite as efficient as  
the dry blades in this application. If used for grinding, your  
container will mar and become cloudy; see instructions for  
dry container use.  
Dry Blade Container: These blades are clearly marked “D”  
and are designed specifically for grinding dry materials such  
as grains, cereal, and coffee, and are also used for kneading  
bread dough. The dry blades can NOT process liquids  
efficiently. If you grind herbs on a regular basis, you may  
wish to purchase a separate dry blade container and replace  
blades as needed.  
CAUTION  
Moving Parts  
May Become  
Hot With  
Extended Use.  
DO NOT touch.  
13  
 
TAMPER  
CAUTION  
Rotating Blades Can Cause Damage.  
Lids and tampers are not interchangeable between  
different container styles, types, and sizes. Use the  
tamper that was supplied with your machine.  
How to Determine the Tamper that Can Be Used with  
Your Container  
Each type of tamper is designed to be used safely and effectively with a particular  
container. If a tamper came with your container, it is the correct tamper for  
the container. If a tamper did not come with your container, or you want to  
determine if a tamper that you already have can be used with your new container,  
please compare your container with the containers and matching tampers to the  
illustration below.  
Before using the tamper during the blending process, verify that it is the  
proper tamper.  
64 oz. Short Containers use Tamper 016041 that is approximately  
9-¾ inches long.  
64 oz. Tall Containers uses Tamper 000760 that is approximately  
12-½ inches long.  
32 oz. and 48 oz. Containers use Tamper 015033 that is approximately  
11 inches long.  
14  
 
TAMPER  
To verify that you are using the correct tamper, place the lid on an empty  
container, remove the lid plug and insert the tamper. If it is the correct tamper  
it should easily fit into the opening but will not come in contact with the blades  
no matter how you move the tamper inside the container. IF THE TAMPER  
TOUCHES THE BLADES AT ANY ANGLE - DO NOT USE THE TAMPER WITH  
YOUR CONTAINER.  
If you do not have the correct tamper for your container, call Vitamix Customer  
services at 1.800.848.2649 or 1.440.235.4840 or e-mail [email protected] to  
order a new tamper. If purchased outside the United States or Canada, contact  
your local Vitamix Dealer.  
15  
 
HOW TO USE THE TAMPER  
WARNING  
Rotating Blades Can  
Cause Severe Injury.  
DO NOT put hands, spatulas, etc.  
in the container while the machine  
is running or while the container is  
still on the base.  
Lids and tampers are not  
interchangeable between different  
container styles, types, and sizes.  
Use the tamper that was supplied  
with your machine.  
IMPORTANT!  
The splash disk (near the top of  
the tamper) and lid prevent the  
tamper from hitting the blades  
when the lid is secured properly  
in the locked position.  
Tamper  
Tamper  
Splash Disk  
Lid  
The container should not  
be more than two-thirds  
full when the tamper is used  
during blending.  
To avoid overheating during  
blending, DO NOT use the  
tamper for more than 30  
consecutive seconds.  
If the food does not circulate, the  
machine may have trapped an  
air bubble. Carefully remove the  
lid plug while making sure the  
lid stays firmly in place. Release  
the air bubble by inserting  
the tamper through the lid  
plug opening.  
Blade Assembly  
Holding the tamper straight down may not help the ingredients circulate.  
If necessary, point the tamper toward the sides or corners of the container.  
DO NOT try to force the tamper deeper into the container.  
16  
 
HINTS FOR SETTING SPEEDS  
CAUTION  
Never Start on Speeds Above 1 with  
Hot Liquids to Avoid Possible Burns.  
Escaping steam, splashes or contents  
may scald.  
To secure the contents, lock the lid and lid  
plug securely in place prior to operating  
the machine.  
Always start on Variable 1, slowly increase  
to 10.  
Variable Speed  
Before using the Variable Speed option, always begin with the Variable Speed Dial  
marker pointed at the Stop Symbol ( ) at the top of the dial.  
1. Rotate the dial right to Variable Speed 1.  
2. To activate the blending process, press down on the Start / Stop Switch.  
3. Slowly turn the Variable Speed Dial to the desired speed depending on the  
recipe used.  
4. At the end of the blending cycle, rotate the Variable Speed dial back to the  
Stop Symbol ( ) at the top of the dial.  
Use the highest setting called out in the recipe for as much of the processing  
time as possible to make whole-food juices, soups, shakes, frozen mixtures,  
purées, nut butters, and for grinding grains. Processing times will generally  
be less than one minute (most take less than 30 seconds). Higher speed  
provides the best quality of refinement, breaking down ice, frozen fruit,  
whole fruits or vegetables, and grains to a smooth, lump-free consistency.  
Blending too long at too low of a speed setting will overheat the  
machine and cause the Automatic Overload Protection to turn off the  
machine. Blending on higher speed maximizes the motor’s cooling fan to  
avoid overheating.  
If the mixture stops circulating, you may have trapped an air bubble. To resolve  
Insert the tamper through the lid plug and stir until it “burps.” If this does not  
work, press the On / Off switch to stop the motor. Remove the container  
from the motor base, and use a rubber spatula to press the air bubble away  
from the blades. Return the container to the motor base, replace the lid, and  
continue blending.  
17  
 
HINTS FOR SETTING SPEEDS  
Programs  
Programs vary in blending speed and duration and will automatically stop at the  
end of the program.  
The Smoothie ( ) program runs for approximately 45 seconds.  
The Frozen Dessert ( ) program runs for approximately 55 seconds.  
The Hot Soup ( ) program runs for approximately 5 minutes 45 seconds.  
The Purée ( ) program runs for approximately 1 minute.  
The Cleaning ( ) program runs for approximately 1 minute.  
18  
 
OPERATING INSTRUCTIONS  
Wet Blade Container  
The Wet Blade Container is designed for processing liquids, including juice,  
frozen mixtures, sauces, soups, purées, batters, and for wet chopping.  
Before using this container for Programs or the Variable Speed option, always  
begin with the Variable Speed Dial pointed at the Stop Symbol ( ) at the top of  
the dial.  
1. Move the On / Off switch to the On position.  
2. Load the container before placing it on the motor base. Place liquids and  
soft foods in the container first, solid items and ice last. Although not  
necessary for blending, you may want to cut or break food into smaller  
pieces for more precise measuring of ingredients.  
3. Securely fasten the 2-part lid. Always use the complete 2-part lid when  
blending (unless the tamper is inserted through the lid plug opening).  
Especially when blending hot ingredients, make sure that the lid is  
securely latched.  
4. With the motor off, set the wet blade container on the motor base by  
aligning it over the centering pad. Do not ever attempt to put a container  
on an operating motor base or to operate a motor base without a container  
properly in place.  
5. Use the Variable Speed dial to select a function.  
Variable Speed - Rotate the dial right of center to Variable Speed 1.  
Programs - Rotate the dial left of center to the desired program.  
6. Activate the blades by pressing the Start / Stop Switch. Your container may  
shift as it gets into an aligned position.  
Variable Speed - slowly rotate the Variable Speed dial to the right to the  
desired speed.  
Programs - The programs vary in blending speed and duration and  
will automatically stop at the end of the program. Programs can be  
interrupted by pushing down the Start / Stop switch at any time. If  
reactivated by pushing down the Start / Stop switch, the program will  
start at the beginning.  
7. If the mixture stops circulating, you may have trapped an air bubble. To  
resolve Insert the tamper through the lid plug and stir until it “burps.” If  
this does not work, press the On / Off switch to stop the motor. Remove  
the container from the motor base, and use a rubber spatula to press the  
air bubble away from the blades. Return the container to the motor base,  
replace the lid, and continue blending.  
19  
 
OPERATING INSTRUCTIONS  
8. Take proper care when handling and processing hot ingredients and  
making hot soups and sauces.  
CAUTION  
Never Start on Speeds Above 1 with  
Hot Liquids to Avoid Possible Burns.  
Escaping steam, splashes or contents  
may scald.  
To secure the contents, lock the lid and lid  
plug securely in place prior to operating  
the machine.  
Always start on Variable 1, slowly increase  
to 10.  
9. Due to the machine’s speed, processing times are much quicker than  
standard appliances. Until you are accustomed to the machine, count your  
time carefully to avoid over-processing.  
10. After pressing the Start / Stop switch to stop the cycle, wait until the blades  
stop completely before removing the lid or container from the motor base.  
Dry Blade Container  
Before using this container for programs or the Variable Speed option, always  
begin with the Variable Speed Dial pointed at the Stop Symbol ( ) at the top of  
the dial.  
If purchased, your dry blade container should be used only for hard, dry materials,  
such as grain, and for kneading dough.  
1. Load the container before placing it on the motor base.  
2. Securely fasten the 2-part lid. Always use the complete 2-part lid when  
blending (unless the tamper is inserted through the lid plug opening).  
3. With the motor off, set the dry blade container on the motor base by  
aligning it over the centering pad. Do not ever attempt to put a container  
on an operating motor base or to operate a motor base without a container  
properly in place.  
4. To begin, make sure the On / Off switch is in the On position.  
5. Use the Variable Speed dial to select a function.  
Variable Speed - Rotate the dial right of center to Variable Speed 1.  
Programs - Rotate the dial left of center to the desired program.  
20  
 
OPERATING INSTRUCTIONS  
6. Activate the machine by pressing the Start / Stop Switch. Your container will  
shift and get into an aligned position.  
Variable Speed  
desired speed.  
-
slowly increase the Variable Speed to the  
Programs - The programs vary in blending speed and duration and  
will automatically stop at the end of the program. Programs can be  
interrupted by pushing down the Start / Stop switch at any time. If  
reactivated by pushing down the Start / Stop switch, the program will  
start at the beginning.  
21  
 
CARE AND CLEANING  
Container  
To prepare your new machine for initial use, follow the steps under Normal  
Cleaning below. This will clean the unit and break-in the motor.  
Normal Cleaning  
Before using the Variable Speed or Program options, always begin with the  
Variable Speed Dial pointed at the Stop Symbol ( ) at the top of the dial.  
1. Fill the container half full with warm water and add a couple drops of liquid  
dish washing detergent to the container.  
2. Snap or push the complete 2-part lid into the locked position.  
3. Perform one of the following procedures:  
Variable Speed:  
a. Rotate the Variable Speed dial to 1.  
b. Press the Start / Stop switch.  
c. Slowly increase Variable speed to 10.  
d. Run the machine for 30 to 60 seconds.  
e. Rotate the Variable Speed dial to the Stop Symbol ( ) at the top of  
the dial.  
Program  
a. Rotate the Variable Speed dial to the Cleaning ( ) program icon.  
The Cleaning ( ) program will run for approximately 1 minute.  
b. After the program stops, rotate the Variable Speed dial to the Stop  
Symbol ( ) at the top of the dial.  
4. Rinse and drain the container.  
Lid, Lid Plug and Tamper  
Separate the lid and lid plug. Wash parts in warm, soapy water. Rinse clean under  
running water and dry. Reassemble before use.  
IMPORTANT: To ensure continued and effective performance, do not put the  
container, lid, lid plug or tamper in the dishwasher.  
22  
 
CARE AND CLEANING  
Motor Base  
1. Unplug the power cord.  
WARNING  
Electrical Shock Hazard.  
Disconnect power before  
cleaning machine.  
Failure to follow instructions can  
cause death or electrical shock.  
2. Wash the outside surface with a damp, soft cloth or sponge that has been  
rinsed in a mild solution of liquid detergent and warm water. Do not place  
the motor base in water.  
3. The centering pad can be removed for more thorough cleaning.  
4. Thoroughly clean the switches so they work freely. They may become sticky  
from use. Moisten a cotton swab with a household degreaser or cleaner and  
clean the grooves around the switches. Immediately dry all surfaces.  
5. Polish with a soft cloth.  
23  
 
TROUBLESHOOTING  
Automatic Overload Protection  
Your Vitamix machine is equipped with a special feature: Automatic Overload  
Protection. This built-in feature is designed to protect the motor and prevent your  
machine from overheating. When engaged, this Automatic Overload Protection  
will cause the motor to shut off and possibly emit a light odor.  
If your Automatic Overload Protection should ever be activated, refer to page 10  
in this manual to easily reset your machine.  
Tips to prevent “overloading” your Vitamix machine:  
Process only Vitamix recipes when learning to use the machine  
Do not process recipes at lower speeds than recommended  
Do not process recipes at higher speeds than recommended  
Do not process recipes longer than recommended  
Use your tamper to process thicker mixtures and keep ingredients moving  
around and through the blades  
Retainer Nut Loosening  
In the event that the retainer nut at the bottom of your container loosens and no  
longer securely holds the blade assembly in place, DO NOT CONTINUE TO USE THE  
CONTAINER. Call Vitamix Customer Service at 1.800.848.2649 or 1.440.235.4840,  
or your local dealer immediately for instructions.  
24  
 
WARRANTY  
Full 5-Year Reconditioned Machine Warranty  
1. PRODUCT REGISTRATION.  
Vita-Mix® Corporation (“Vitamix”) strongly encourages you to register your  
purchase by completing and returning the product registration card that came  
with this Machine. You can register online at vitamix.com/warranty; or by calling  
our Customer Service Department at 1.800.848.2649 or 1.440.235.4840. Failure  
to register your product purchase will not diminish your warranty rights. However,  
registering your purchase will allow Vitamix to better serve you with any of your  
customer service needs.  
2. WHO CAN SEEK WARRANTY COVERAGE.  
This Warranty is extended by Vitamix to the owner of this Machine for personal  
household use only. This Warranty does not apply to products used for  
commercial, rental or re-sale purposes. Should ownership of the machine change  
during the 5-year period, please update the Machine’s owner information at  
vitamix.com/warranty.  
3. WHAT IS COVERED.  
Vitamix warrants to the owner that if this Machine (a “Machine” consists of  
a motor blender base and any containers purchased together) fails within 5  
years from the date of purchase due to a defect in material or workmanship or  
as a result of normal wear and tear from ordinary household use, Vitamix will,  
within 30 days of receipt of the returned product, repair the failed Machine or  
component part of the Machine free of charge.  
If, in Vitamix’s sole discretion, the failed Machine or component part of the  
Machine cannot be repaired, Vitamix will elect to either (A) replace the Machine  
free of charge or (B) refund the full purchase price to the owner, unless Vitamix  
receives prior written notice of the owner’s preference.  
4. WHAT IS NOT COVERED.  
This Warranty does not apply to Machines that have been used commercially or  
in non-household applications. This Warranty does not cover cosmetic changes  
that do not affect performance, such as discoloration or the effects of the use  
of abrasives or cleaners or food build up. This Warranty is only valid if the  
Machine is used and maintained in accordance with the instructions, warnings  
and safeguards contained in the owner’s manual.  
Vitamix will not be responsible for the cost of any unauthorized warranty repairs.  
25  
 
WARRANTY  
REPAIR, REPLACEMENT OR REFUND OF THE PURCHASE PRICE ARE THE  
EXCLUSIVE REMEDIES OF PURCHASER AND THE SOLE LIABILITY OF  
VITAMIX UNDER THIS WARRANTY. NO EMPLOYEE OR REPRESENTATIVE  
OF VITAMIX IS AUTHORIZED TO MAKE ANY ADDITIONAL WARRANTY OR  
ANY MODIFICATION TO THIS WARRANTY WHICH MAY BE BINDING UPON  
VITAMIX. ACCORDINGLY, PURCHASER SHOULD NOT RELY UPON ANY  
ADDITIONAL STATEMENTS MADE BY ANY EMPLOYEE OR REPRESENTATIVE  
OF VITAMIX. IN NO EVENT, WHETHER BASED ON CONTRACT, INDEMNITY,  
WARRANTY, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR  
OTHERWISE, SHALL VITAMIX BE LIABLE FOR ANY SPECIAL, INDIRECT,  
INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING, WITHOUT  
LIMITATION, LOSS OF PROFIT OR REVENUE.  
Some states do not allow limits on warranties. In such states, the above  
limitations may not apply to you. Outside the U.S.A. and Canada, other  
warranties may apply.  
5. WHAT VOIDS THIS WARRANTY.  
Abuse, misuse, negligent use, alteration of the Machine, exposure to abnormal  
or extreme conditions, or failure to follow the operating instructions will void  
this Warranty.  
The Warranty is also void if repairs to the Machine or any component part  
of the Machine are performed by someone other than either Vitamix or an  
authorized Vitamix Service Provider or if any component part of a Machine  
subject to this Warranty is used in combination with a motor base or container  
that is not expressly authorized by Vitamix.  
6. HOW TO OBTAIN RETURN AUTHORIZATION UNDER THIS WARRANTY.  
In the event that the Machine or any component part of the Machine needs  
service or repair, please call Vitamix Customer Service at 1.800.848.2649 or  
1.440.235.4840. You will be asked to provide a date of purchase and proof  
of purchase for any product that has not been registered with Vitamix.  
For product subject to this Warranty you will be provided with a return  
authorization number, up-to-date shipping instructions and a pre-paid return  
pick up label. Vitamix will pay standard shipping costs on the return of a  
Machine or component part for warranty service and repair and for return  
shipment of the product to you after the warranty repair or replacement.  
Purchaser is responsible for the costs of special shipping requests.  
26  
 
WARRANTY  
Within the U.S.A., this Warranty is honored directly through the  
Vita-Mix® Corporation.  
Vita-Mix® Corporation  
8615 Usher Road  
Cleveland, Ohio 44138-2199  
1-800-848-2649  
You will be deemed to have accepted the returned product “as is” upon delivery  
unless you notify Vitamix of any problem, including shipment damage, within 48  
hours of delivery.  
SPECIAL INTERNATIONAL INSTRUCTIONS  
If a machine was purchased within the U.S.A. or Canada, but is currently outside  
the U.S.A. or Canada, all shipping and resulting taxes and duties are at the owner’s  
expense. Call +1.440.235.4840 or email [email protected] for more details.  
27  
 
SPECIFICATIONS  
Certified Reconditioned Next Generation Programmed  
Motor:  
2.2 peak output horsepower motor  
Electrical:  
120 V, 50 / 60 Hz, 12 A  
Uses a U.S.A. three–prong grounded cord  
Dimensions:  
Height: 17.4 in. / 44,2 cm  
Width: 7.7 in. / 19,6 cm  
Depth: 9.4 in. / 23,9 cm  
When applicable:  
To see the complete line of Vitamix® products,  
visit vitamix.com.  
Vita-Mix® Corporation  
8615 Usher Road  
Cleveland, OH 44138-2103 U.S.A.  
1.800.848.2649 / 1.440.235.4840  
vitamix.com  
©2013 Vita-Mix® Corporation. No part of this publication may be reproduced or  
transmitted in any form or by any means or stored in a database or retrieval system  
without the written permission of the Vita-Mix® Corporation.  
104276 4 / 13  
Printed in the U.S.A.  
 

TDK Network Card DEA Series DEA162500LT 1217A1 User Manual
Texas Instruments DVD Player TVP5147M1PFP User Manual
Texas Instruments Power Supply ADS5102 EVM User Manual
Texas Instruments TV Converter Box DAC3482 User Manual
The Singing Machine Home Theater System STVD 919 User Manual
Toastmaster Toaster TC14E35 User Manual
Toshiba Laptop A215 S6804 User Manual
Troy Bilt Lawn Mower TB2246 User Manual
Troy Bilt Tiller 12056 User Manual
Uniden Cordless Telephone EXS 9650 User Manual