Viking Home Dialysis Equipment K 1900 5 User Manual

K-1900-5  
Hot-Line Touch  
Tone Dialer  
February 8, 2005  
TECHNICAL  
Practice  
TELECOM SOLUTIONS FOR THE 21ST CENTURY  
Replace Dedicated Phone Lines with a  
Touch Tone Hot-Line Dialer  
Why pay the premium of leased or dedicated phone lines?  
The K-1900-5 will automatically dial a preprogrammed number,  
of up to 32 digits, whenever an associated telephone is taken off  
2
hook. Using non-volatile E memory, the K-1900-5 is telephone  
line powered and will operate on any loop start central office line  
or analog PABX/KSU extension.  
The K-1900-5 is easily programmed remotely or locally using a  
standard Touch Tone phone.  
Applications  
!
This product does not eliminate the  
possibility of toll fraud! To further protect  
against fraudulent calls, use with a TR-1  
Toll Restrictor (Fax Back Document 705).  
• Security and emergency phones  
• Interactive point of sale displays  
• Apartment security  
• Catalog sales  
Features  
• Automated Teller Machines (ATM’s)  
• Replaces leased ring down circuits  
• Hot-Line reservation phones for hotels, airlines,  
car rentals, etc.  
Touch Tone programmable  
Telephone line powered  
2
• Non-volatile E memory (no batteries required)  
• Ring detection (won’t dial on inbound calls)  
• User programmable security code  
• Programmable pauses in one and four second  
increments  
• Programmable to interrupt user Touch Tone  
dialing to help control fraudulent calls from  
hand held dialers, etc.  
• Programmable dialing speed (normal or fast)  
• Can be configured to operate from a contact  
closure (Fax Back Document 818)  
Specifications  
Power: Telephone line powered (24V DC 20 mA minimum)*  
Dimensions: 74mm x 53mm x 25mm (2.9” x 2.1” x 1.0”)  
Shipping Weight: .45 kg (1 lb)  
Environment: 0°C to 32°C (32°F to 90°F) with 5% to 95% non-  
condensing humidity  
Connections: (1) RJ11 plug, (1) RJ11 jack  
Dialing Speed: Normal - 120ms on/off, Fast - 50ms on/off  
* Note: When installing multiple line powered products (K-1900-5 and E-  
10/E-15/E-20A/K-1500-EHF) on the same line, additional talk battery  
voltage and loop current may be required.  
Installation  
A. Accessing the Programming Mode  
Install the K-1900-5 in series between a telephone and a  
C.O. line or analog PABX/KSU station.  
1. Connect the K-1900-5 to a C.O. line or analog PABX/KSU station.  
2. From a Touch Tone phone, call another phone connected to the  
K-1900-5.  
3. Take the phone connected to the dialer off hook (answer the  
phone).  
4. Enter followed by the six digit security code (see section D on  
the next page). A double beep will indicate that you have  
accessed the programming mode.  
VIKING©  
Programmable  
Tone Dialer  
Standard Analog  
Telecom Device  
C.O. Line or Analog  
PABX/KSU Station  
MODEL: K-1900-5  
Quick Programming Guide  
1. Call the phone connected to the dialer.  
2. Answer phone. Enter   
&
security code.  
(Factory set to 845464) Write your  
security code below:  
3. Enter your spped dial number  
&
#00.  
Note: For additional programming see  
K-1900-5 Technical Practice.  
Viking Electronics, Inc.  
Hudson, WI 54016  
5. You can now program your speed dial number and the following  
features listed in section B below.  
LINE IN  
PHONE  
Note: Programming from a cell-phone may not be suitable in areas  
with weak coverage.  
 

Toastmaster Juicer 1108 User Manual
Toshiba Computer Hardware L650 User Manual
TRENDnet Network Card TEW 641PC User Manual
TRENDnet Security Camera TVIP572W User Manual
Uniden Cell Phone TCX930 User Manual
ViewSonic Mouse KP102 User Manual
Volkswagen Motorized Toy Car W6202 User Manual
Vox Guitar HDC 77 User Manual
Walker Lawn Mower 36 User Manual
Weber Gas Grill 55009 User Manual