ERAM-60
Memory Expansion Kit for
TECHNICAL
the DVA-2W, DVA-500A, DVA-
1003B, DVA-3003 and FBI-1A
Practice
May 7, 2001
TELECOM SOLUTIONS FOR THE 21ST CENTURY
Expand the Voice Record Time of
Viking Products
The ERAM-60 Memory Expansion Kit is
designed to expand the voice record memory
of specified Viking products using non-volatile
memory.
Each kit includes one 28 pin non-volatile
memory chip which provides one minute of
record time. The num-
Maximum Record Time
Model
# of Kits Factory Record Time
ber of chips required is
dependant on the
record time required
and the capacity of the
announcer.
4 minutes
DVA-2W
DVA-500A
up to 3
1
1 minute
1 minute
16 seconds
1 minute
DVA-1003B up to 3
16 seconds per channel
4 minutes per channel
(12 minutes total)
DVA-3003
up to 9
1 minute per channel
(3 minutes total)
1 minute
FBI-1A
1
16 seconds
Installation
Specifications
Environmental: 0° C to 32° C (32° F to 90° F) with 5% to 95%
non-condensing humidity
A. DVA-2W Memory Expansion
Important: Electronics componants are sensitive to
static electricity. Personnel and the work area should
be grounded before handling.
Description: (1) 28-pin ERAM chip (1 minute of record time)
Phone...715.386.8861
1. Disconnect the power to the DVA-2W.
2. Remove the (2) screws on the bottom of the unit,
then remove the cover.
m
onics.co
ingelectr
info@vik
3. Insert the ERAM chip(s) carefully into the appro-
priate socket(s) with the indents facing in the dir-
ection shown in the diagram below.
4. Replace the cover and screws of the DVA-2W.
Kit 3
ERAM-60
VIKING ELECTRONICS
Kit 2
ERAM-60 REV B
Kit 1
|