ViewSonic Computer Monitor G220F User Manual

G220f  
Color Monitor  
G220fb  
User Guide  
Guide de l’utilisateur  
Bedienungsanleitung  
Guía del usuario  
Guida dell'utente  
Guia do usuário  
Användarhandbok  
Käyttöopas  
ꢀꢁꢂꢃꢄꢃꢅꢆꢇꢄꢃ ꢈꢃꢉꢊꢋꢃꢄꢌꢇꢍꢉꢎ  
ꢀꢁꢂꢃꢄꢅꢆꢇ ꢈꢉꢊꢋꢂꢌꢅꢍꢎ  
With Plug & Play✘  
21" (20" Viewable Diagonal)  
Panduan Pengguna  
 
Copyright © ViewSonic Corporation,  
. All rights reserved.  
Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc.  
Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft  
Corporation in the United States and other countries.  
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of  
ViewSonic Corporation.  
VESA is a registered trademark of the Video Electronics Standards Association. DPMS and DDC  
are trademarks of VESA.  
ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency (EPA).  
As an ENERGY STAR® partner, ViewSonic Corporation has determined that this product meets the  
ENERGY STAR® guidelines for energy efficiency.  
Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions  
contained herein; nor for incidental or consequential damages resulting from furnishing this mate-  
rial, or the performance or use of this product.  
In the interest of continuing product improvement, ViewSonic Corporation reserves the right to  
change product specifications without notice. Information in this document may change without  
notice.  
No part of this document may be copied, reproduced, or transmitted by any means, for any purpose  
without prior written permission from ViewSonic Corporation.  
Product Registration  
To meet your future needs, and to receive any additional product information as it becomes available,  
please register your product on the Internet at: www.viewsonic.com. The ViewSonic® Wizard CD-  
ROM also provides an opportunity for you to print the registration form, which you may mail or fax  
to ViewSonic.  
For Your Records  
Product Name:  
Model Number:  
Document Number:  
Serial Number:  
Purchase Date:  
ViewSonic G220f/fb  
VCDTS23852-1/-2  
A-CD-G220f/fb-1  
_______________  
_______________  
Product disposal at end of product life  
ViewSonic is concerned about the preservation of our environment. Please dispose of this product  
properly at the end of its useful life. For TCO'03 recycling information, please refer to our website:  
3. Taiwan: recycle.epa.gov.tw  
ViewSonic  
G220f  
2
 
   
Getting Started  
Congratulations on your purchase of a ViewSonic® color monitor. Important!  
Save the original box and all packing material for future shipping needs.  
NOTE: The word “Windows” in this user guide refers to the following Microsoft  
operating systems: Windows 95, Windows NT, Windows 98, Windows 2000,  
Windows Me (Millennium), and Windows XP.  
Package Contents  
Your package includes:  
• Color monitor  
• DB-15 video cable  
• Power cord  
• ViewSonic Wizard CD-ROM  
NOTE: The CD jacket contains the Quick Start Guide, and the CD includes the  
User Guide PDF files and INF/ICM display optimization files. The INF file  
ensures compatibility with Windows operating systems, and the ICM file (Image  
Color Matching) ensures accurate on-screen colors. ViewSonicrecommends that  
you install both files.  
Precautions  
• For best viewing conditions sit at least  
18" from the monitor.  
AVOID TOUCHING THE SCREEN  
WITH YOUR FINGERS. Oils from the  
skin are difficult to remove.  
• NEVER REMOVE THE REAR  
COVER. The monitor contains high  
voltage parts. You may suffer serious  
injury if you touch these parts.  
• Place your monitor in a well ventilated  
area. Do not place anything on the  
monitor that prevents adequate  
dissipation of heat.  
• Ensure the area around the monitor is  
clean and free of moisture.  
• Keep the monitor away from magnets,  
motors, transformers, speakers, and  
televisions.  
• Avoid exposing the monitor to direct  
sunlight or another heat source,  
including an open flame. The monitor  
should be facing away from direct  
sunlight to reduce glare.  
• Always handle your monitor with care  
when moving it.  
• Do not place heavy objects on the  
monitor, video cable, or power cord.  
• If smoke, abnormal noise, or strange  
odor is present, immediately switch the  
monitor off and call your dealer or  
ViewSonic. It is dangerous to continue  
using the monitor.  
ViewSonic  
G220f  
3
 
     
Quick Installation  
Important: If your computer does not have a  
CD-ROM drive, see Customer Supportin  
this user guide.  
1 Connect power cord  
Connect the power cord to a properly  
grounded AC outlet.  
(2) Wait for the CD-ROM to auto-start.  
2 Connect video cable  
Make sure both the monitor and computer  
are turned OFF.  
If the CD-ROM does not auto-start: double-  
click on the CD-ROM icon in Windows  
Explorer, then double-click on  
viewsonic.exe.  
Connect the video cable to the computer.  
Macintosh® users: Models older than G3  
require a Macintosh adapter. Attach the  
adapter to the computer and plug the  
video cable into the adapter.  
To order a ViewSonic® Macintosh  
adapter, contact ViewSonic. See  
Customer Supporton page 13.  
(3) Follow the on-screen instructions.  
5 Windows users: Set the Timing  
Mode (resolution and refresh rate)  
Example: 1600 x 1200 @ 75 Hz.  
For instructions on changing the resolution  
and refresh rate, see the graphic cards user  
guide.  
3 Turn ON monitor and computer  
Turn ON the monitor, then turn ON the  
computer. This sequence (monitor before  
computer) is very important.  
Installation is complete. Enjoy your new  
ViewSonic color monitor.  
To be best prepared for any future customer  
service needs: print this user guide and write  
the serial number in For Your Records” on  
page 2. (See back of monitor.) To register  
your product go online to  
NOTE: At this point Windows users may  
receive a message asking them to install  
the INF file.  
4 Install Display Optimization  
files (INF and ICM files)  
(1) Insert the ViewSonic Wizard CD-  
ROM into your computers CD-ROM  
drive.  
The ViewSonic Wizard CD-ROM also  
provides an opportunity for you to print the  
registration form which you may mail or fax  
to ViewSonic.  
AC Outlet  
Video Cable  
Power Cord  
ViewSonic  
G220f  
4
 
 
Using the Monitor  
Setting the Timing Mode  
Setting the timing mode is important for maximizing the quality of the  
screen image and minimizing eye strain. The timing mode consists of the  
resolution (example 1600 x 1200) and refresh rate (or vertical frequency;  
example 75 Hz). After setting the timing mode, use the OnView® controls  
to adjust the screen image.  
For the best picture quality set your monitor timing mode to:  
VESA 1600 x 1200 @ 75 Hz or 85 Hz  
To set the Timing Mode:  
1
Set the resolution: Right-click on the Windows desktop > Properties >  
Settings > set the resolution.  
2
Set the refresh rate: See your graphic card's user guide for instructions.  
WARNING: Do not set the graphics card in your computer to exceed the  
maximum refresh rate; doing so may result in permanent damage to your CRT  
display.  
ViewSonic  
G220f  
5
 
   
Adjusting the Screen Image  
Use the buttons on the front control panel to display and adjust the OnView®  
controls which display on the screen. The OnView controls are explained at the  
top of the next page and are defined in Main Menu Controlson page 8.  
Main Menu with control options  
Status line at the bottom of the menu  
shows what to do next. For example  
from Main Menu 1, button [1] EXITs  
the menu. Button [2] SELECTs a  
highlighted control (or pair of  
controls).  
Front Control Panel  
shown below in detail  
Displays the Main Menu.  
Also saves changes and exits the Main Menu.  
Scrolls up/down menu options.  
Also adjusts the displayed control.  
Power Light  
Power ON/OFF  
Displays the highlighted control screen.  
Also, toggles between pairs of controls on some  
control screens.  
ViewSonic  
G220f  
6
 
 
Do the following to adjust the screen image:  
1
To display the Main Menu, press button [1].  
2
3
To select a control you want to adjust, press the arrow buttons on the front  
control panel of your monitor and scroll through the choices. When the  
control you want is highlighted, press button [2].  
NOTE: Some controls on the Main Menu are listed in pairs, such as  
Contrast/Brightness. Display control screen (sample shown in step 3 below).  
Press button [2] to toggle to the next control in the pair.  
To adjust the selected control, such as CONTRAST in the sample below,  
press the arrow buttons.  
The down button [M] on your  
monitor decreases, the up button  
[L] increases.  
The bottom part of the screen  
tells you what to do next: press  
button [1] on your monitor to exit,  
or button [2] to display the  
Brightness control screen.  
4
To save the control setting and Exit the menu press button [1] twice.  
ViewSonic  
G220f  
7
 
Main Menu Controls  
Adjust the menu items shown below by using the Up and Down buttons on the  
control panel on the front of your monitor.  
Control  
Explanation  
Contrast adjusts the difference between the image  
background (black level) and the foreground (white level).  
Brightness adjusts the background black level of the screen  
image.  
Horizontal Size adjusts width of the screen image.  
Horizontal Position moves the screen image left or right.  
Vertical Size adjusts the height of the screen image.  
Vertical Position moves the screen image up or down.  
Zoom expands and contracts the entire screen image.  
Pincushion curves the vertical sides of the screen image.  
Pin Balance curves the vertical edges of the screen image to  
the left or right.  
Trapezoid adjusts the top and bottom of the screen image  
until they have equal length.  
Parallel slants the vertical edges of the screen image until  
they are parallel.  
Top Hook adjusts the top corners of the screen image.  
Bottom Hook adjusts the bottom corners of the screen  
image.  
H. Convergence (Horizontal Convergence) adjusts vertical  
color alignment. Use this control when red or blue borders  
are present around the vertical segments of black letters on a  
white background.  
ViewSonic  
G220f  
8
 
 
Control  
Explanation  
V. Convergence (Vertical Convergence) adjusts horizontal  
color alignment. Use this control when red or blue borders  
are present around the horizontal segments of black letters  
on a white background.  
Tilt rotates the entire screen image.  
Degauss removes the build-up of magnetic fields that can  
cause irregular colors to appear around the edges of screen  
images. There are two ways to degauss the display:  
automatically by turning the monitor on, or manually by  
selecting the Degauss control from the menu.  
With Degauss selected from the menu, press button [2] to  
degauss the monitor manually.  
Important: Do not degauss repeatedly. Doing so can be  
harmful to the display. Wait at least 20 minutes before  
selecting this control again.  
Purity adjusts the uneven color of the screen image.  
NOTE: If one area of a color appears darker than another  
area, first use the DEGAUSS feature. If color is still uneven,  
use the PURITY control.  
V. Moire (Vertical Moire) reduces horizontal interference  
patterns that appear as ripples, waves, or unwanted  
background color textures. Interference patterns of this type  
are most noticeable when viewing images having closely  
spaced lines or finely detailed patterns.  
H. Moire (Horizontal Moire) reduces vertical interference  
patterns that appear as ripples, waves, or unwanted  
background color textures. Interference patterns of this type  
are most noticeable when viewing images having closely  
spaced lines or finely detailed patterns.  
ViewSonic  
G220f  
9
 
Control  
Explanation  
ViewMatch Color provides several color options: several  
preset color temperatures and User Color which allows you  
to adjust red (R), green (G), and blue (B). The factory  
setting for this product is 9300K (9300°Kelvin).  
9300K Adds blue to the screen image for cooler white  
(used in most office settings with fluorescent lighting).  
6500K Adds red to the screen image for warmer white  
and richer red.  
5000K Adds blue and green to the screen image for a  
darker color.  
User Color Individual adjustments for red, green, and  
blue.  
Input Level displays the voltage level of the video signal.  
NOTE: the default selection is 0.7V.  
Language allows you to choose from among several  
languages for the menus and control screens: English,  
French, German, Italian, Spanish, Traditional Chinese,  
Simplified Chinese, and Japanese.  
OSD Position allows you to move the on-screen display  
menus and control screens.  
ViewMeter® displays the frequencies (horizontal and  
vertical) coming from the graphics card of the computer.  
Memory Recall returns adjustments to the original factory  
settings if the display is operating in a factory preset timing  
mode listed in this user guide.  
Exception: This control does not affect changes made with  
the User Color control.  
ViewSonic  
G220f  
10  
 
Other Information  
Specifications  
21" (20.0" viewable diagonal area), 90o deflection,  
29.1 mm Neck  
Type  
CRT  
Dot Pitch  
0.25 mm (Center)  
Phosphor  
RGB medium/short persistence B22  
TM~50%, anti-reflection, anti-static  
Glass surface  
Video  
Sync  
RGB Analog (0.7/1.0Vp-p, 75 Ohms,  
fH: 30-110 kHz, fv: 50-180 Hz  
Input Signal  
HV Separate (TTL), Composite  
PC  
VGA up to 1920 x 1440  
Power Macintosh (may require Macintosh cable  
adapter)  
Compatibility  
Macintosh*  
Recommended and  
supported  
VESA 1600 x 1200 @ 75 & 85 Hz  
VESA 1280 x 1024 @ 75 & 85 Hz  
VESA 1024 x 768 @ 75 & 85 Hz  
VESA 800 x 600 @ 75 & 85 Hz  
VGA 640 x 480 @ 60 Hz  
Resolution  
IND 640 x 400 @ 70 Hz  
MAC 1152 x 870 @ 75 Hz  
MAC 1024 x 768 @ 75 Hz  
MAC 832 x 624 @ 75 Hz  
MAC 640 x 480 @ 67 Hz  
Voltage  
AC 90-264 VAC (auto switch)  
50/60 (+/- 3) Hz  
Power  
Default  
Full scan  
390 mm (H) x 290 mm (V) (typical)  
400 mm (H) x 300 mm (V) (depends on signal timing)  
Display Area  
Temperature  
Humidity  
Altitude  
+32° F to +104° F (0° C to +40° C)  
5% to 95% (no condensation)  
To 10,000 feet  
Operating  
Conditions  
Temperature  
Humidity  
Altitude  
-40° F to +140° F (-40° C to +60° C)  
5% to 95% (no condensation)  
To 40,000 feet  
Storage  
Conditions  
Physical  
(monitor)  
500 mm (W) x 508 mm (H) x 488 mm (D)  
19.6" (W) x 20.0" (H) x 19.21" (D)  
Dimensions  
Net  
27.0 kgs (59.4 lbs) (monitor only)  
Weight  
UL, cUL, DHHS, FCC-B, CE, DOC-B, ICES-003, CB,  
NOM, CCIB, CE, PCBC, TUV/GS, VCCI, BSMI,  
C-Tick, TUV/Ergo, TUV/S, MPR-II, NEMKO, SEMKO,  
DEMKO,FIMKO,PSB,PCT,SASO,ENERGYS TAR®,  
TCO99  
Regulations  
On  
Active Off  
115W TYPICAL (Green LED)  
< 4W (Orange LED)  
Power Saving  
Modes  
*Macintosh models prior to G3 require a Macintosh adapter. To order a ViewSonic® Macintosh adapter,  
contact Customer Support. You will need to provide the product serial number.  
NOTE: This product was designed for operation in the magnetic fields of the hemisphere where it was  
purchased.  
ViewSonic  
G220f  
11  
 
   
Troubleshooting  
No power  
Make sure power button (or switch) is ON.  
Make sure A/C power cord is securely connected to the back of the monitor  
and to a power outlet.  
Plug another electrical device (like a radio) into the power outlet to verify that  
the outlet is supplying proper voltage.  
Power is ON but no screen image  
Make sure the video cable supplied with the monitor is tightly secured to the  
video output port on the back of the computer. If the other end of the video cable  
is not attached permanently to the monitor, tightly secure it to the monitor.  
Adjust brightness and contrast.  
Verify whether an adapter is required for proper signal continuity between  
graphics card and monitor.  
Flickering  
Not enough power supplied. Connect the monitor to a different outlet. If  
using a surge protector, reduce the number of devices plugged in.  
Check the ViewMeter from the main menu to verify the refresh rate (vertical  
frequency) is 75 Hz or higher. See Specificationson page 11.  
Remove any devices from the area around the monitor that emit magnetic  
fields such as radios, surge protectors, unshielded speakers, fluorescent  
lights, AC power converters, desk fans, etc.  
Make sure the graphics card in your computer can use non-interlaced mode at  
the desired frequencies. To enable your graphics card to support higher  
refresh rates, try selecting fewer colors or running lower resolutions.  
Wrong or abnormal colors  
If any colors (red, green, or blue) are missing, check the video cable to make  
sure it is securely connected. Loose or broken pins in the cable connector  
could cause an improper connection.  
Connect the monitor to another computer.  
Select Degauss from the Main Menu. Do this only once.  
If you have an older graphics card, contact ViewSonic® Customer Support.  
Entire screen image rolls vertically  
Make sure video input signals are within the monitor's specified frequency range.  
Try the monitor with another power source, graphics card, or computer system.  
Connect the video cable securely.  
Control buttons do not work  
Press only one button at a time.  
ViewSonic  
G220f  
12  
 
 
Customer Support  
For technical support or product service, see the table below or contact your  
reseller.  
NOTE: You will need the product serial number.  
Country/  
Region  
Web site  
T = Telephone Email  
F = FAX  
T:  
F:  
T:  
F:  
T:  
F:  
T:  
F:  
T:  
F:  
T:  
F:  
T:  
F:  
hk.  
ViewSonic  
G220f  
13  
 
 
Cleaning the Monitor  
MAKE SURE THE MONITOR IS TURNED OFF.  
NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE  
SCREEN OR CASE.  
To clean the screen:  
1
2
Wipe the screen with a clean, soft, lint-free cloth. This removes dust and  
other particles.  
If still not clean, apply a small amount of non-ammonia, non-alcohol based  
glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen.  
To clean the case:  
1
2
Use a soft, dry cloth.  
If still not clean, apply a small amount of a non-ammonia, non-alcohol  
based, mild non-abrasive detergent onto a clean, soft, lint-free cloth, then  
wipe the surface.  
DISCLAIMER  
ViewSonic does not recommend the use of any ammonia or alcohol-based  
cleaners on the monitor screen or case. Some chemical cleaners have been  
reported to damage the screen and/or case of the monitor. ViewSonic will not be  
liable for damage resulting from use of any ammonia or alcohol-based cleaners.  
ViewSonic  
G220f  
14  
 
 
Limited Warranty  
VIEWSONIC CRT MONITORS  
What the warranty covers:  
ViewSonic warrants its products to be free from defects in material and workmanship during the  
warranty period. If a product proves to be defective in material or workmanship during the warranty  
period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement  
product or parts may include remanufactured or refurbished parts or components.  
How long the warranty is effective:  
ViewSonic® color CRT monitors, including the display tubes, are warranted for three (3) years for all  
parts and three (3) years for all labor from the date of the first consumer purchase.  
Who the warranty protects:  
This warranty is valid only for the first consumer purchaser.  
What the warranty does not cover:  
1. Any product on which the serial number has been defaced, modified or removed.  
2. Damage, deterioration or malfunction resulting from:  
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product  
modification, or failure to follow instructions supplied with the product.  
b. Repair or attempted repair by anyone not authorized by ViewSonic.  
c. Any damage of the product due to shipment.  
d. Removal or installation of the product.  
e. Causes external to the product, such as electrical power fluctuations or failure.  
f. Use of supplies or parts not meeting ViewSonics specifications.  
g. Normal wear and tear.  
h. Any other cause which does not relate to a product defect.  
3. Removal, installation, and set-up service charges.  
How to get service:  
1. For information about receiving service under warranty, contact ViewSonic Customer  
Support. You will need to provide your product's serial number.  
2. To obtain service under warranty, you will be required to provide (a) the original dated sales slip, (b)  
your name, (c) your address, (d) a description of the problem, and (e) the serial number of the  
product.  
3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic  
service center or ViewSonic.  
4. For additional information or the name of the nearest ViewSonic service center, contact ViewSonic.  
Limitation of implied warranties:  
THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, WHICH EXTEND BEYOND THE  
DESCRIPTION CONTAINED HEREIN INCLUDING THE IMPLIED WARRANTY OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  
Exclusion of damages:  
VIEWSONIC'S LIABILITY IS LIMITED TO THE COST OF REPAIR OR REPLACEMENT OF THE  
PRODUCT. VIEWSONIC SHALL NOT BE LIABLE FOR:  
1. DAMAGE TO OTHER PROPERTY CAUSED BY ANY DEFECTS IN THE PRODUCT, DAMAGES  
BASED UPON INCONVENIENCE, LOSS OF USE OF THE PRODUCT, LOSS OF TIME, LOSS OF  
PROFITS, LOSS OF BUSINESS OPPORTUNITY, LOSS OF GOODWILL, INTERFERENCE WITH  
BUSINESS RELATIONSHIPS, OR OTHER COMMERCIAL LOSS, EVEN IF ADVISED OF THE  
POSSIBILITY OF SUCH DAMAGES.  
2. ANY OTHER DAMAGES, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.  
3. ANY CLAIM AGAINST THE CUSTOMER BY ANY OTHER PARTY.  
Effect of state law:  
This warranty gives you specific legal rights, and you may also have other rights which vary from state  
to state. Some states do not allow limitations on implied warranties and/or do not allow the exclusion of  
incidental or consequential damages, so the above limitations and exclusions may not apply to you.  
Sales outside the U.S.A. and Canada:  
For warranty information and service on ViewSonic products sold outside of the U.S.A. and Canada,  
contact ViewSonic or your local ViewSonic dealer.  
ViewSonic CRT Monitor Warranty (V3.0)  
Release Date: 3-26-02  
ViewSonic  
G220f  
15  
 
 
Appendix  
Safety Guidelines  
CAUTION: The socket-outlet should be installed near the equipment and be easily accessible.  
CAUTION: Use a power cable that is properly grounded. Always use the appropriate AC cord that is  
certified for the individual country. Some examples are listed below:  
ꢀꢁꢂꢃꢃꢃꢃꢃꢃꢃꢃꢃꢃꢃꢃꢃꢃꢃꢃꢄ  
ꢅꢆꢇꢆ ꢆꢃꢃꢃꢃꢃꢃꢃꢃꢃꢃꢃꢃꢁꢂ  
ꢈꢉꢊꢋꢆꢇꢃꢃꢃꢃꢃꢃꢃꢃꢎꢏ  
ꢁꢐꢑꢒꢓꢉꢊꢔꢆꢇ ꢃꢃꢃꢃꢃ ꢁꢏꢍ  
ꢕꢊꢑꢒꢆꢑꢇ ꢃꢃꢃꢃꢃꢃꢃꢃꢃꢃꢃꢃꢃ ꢕꢂꢁꢏꢖꢕꢁ  
ꢗꢆꢘꢆꢇ ꢃꢃꢃꢃꢃꢃꢃꢃꢃꢃꢃꢃꢃꢃꢃ ꢏꢔꢉꢙꢒꢊꢑꢙꢚꢂꢘꢘꢔꢑꢆꢇꢙꢉꢚꢅꢛꢇꢒꢊꢛꢔꢚꢂꢙꢒ  
IMPORTANT NOTICE CONCERNING POWER CORD SELECTION  
The power cord set for this unit has been enclosed and has been selected according to the country of  
destination and must be used to prevent electric shock. Use the following guidelines if it is necessary to  
replace the original cord set, or if the cord set is not enclosed.  
The female receptacle of the cord set must meet IEC-60320 requirements and may look like (Figure A1  
below):  
Figure A1  
Figure A2  
For the United States and Canada  
In the United States and Canada the male plug is a NEMA5-15 style (Figure A2), UL Listed, and CSA  
Labeled. For units which are mounted on a desk or table, type SVT or SJT cord sets may be used. For  
units which sit on the floor, only SJT type cord sets may be used. The cord set must be selected according  
to the current rating for your unit. Please consult the table below for the selection criteria for power cords  
used in the United States and Canada.  
Cord Type  
Size of Conductors in Cord  
Maximum Current Rating of Unit  
SJT  
18 AWG  
16 AWG  
14 AWG  
10 Amps  
12 Amps  
12 Amps  
SVT  
18 AWG  
17 AWG  
10 Amps  
12 Amps  
For European Countries  
In Europe you must use a cord set which is appropriate for the receptacles in your country. The cord set is HAR-  
Certified, and a special mark that will appear on the outer sheath, or on the insulation of one of the inner conductors.  
AC PLUG CORD PRECAUTIONS FOR THE UNITED KINGDOM  
FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.  
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET THEN THE PLUG SHOULD BE  
CUT OFF AND DISPOSED OF SAFELY.  
THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO AN  
APPROPRIATE SOCKET.  
If a new plug is to be fitted, please observe the wiring code as shown below.  
If in any doubt, please consult a qualified electrician.  
WARNING: THIS APPLIANCE MUST BE EARTHED.  
IMPORTANT: The wires in this mains lead are coloured in accordance with the following code:  
Green-and-Yellow: Earth  
Blue: Neutral  
Brown: Live  
If the coloured wires of the mains lead of this appliance do not correspond with the coloured markings identifying the  
terminals in your plug, proceed as follows:  
The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by  
the letter E or by the Earth symbol or coloured GREEN or GREEN-AND-YELLOW.  
The wire which is coloured BLUE must be connected to the terminal in the plug which is marked with the letter N or  
coloured BLACK. The wire which is coloured BROWN must be connected to the terminal in the plug which is marked  
with the letter L or coloured RED.  
If you have any questions concerning which proper power cord to use, please consult with the dealer from whom you  
have purchased the product.  
ViewSonic  
G220f  
16  
 
   
Compliance Information for U.S.A.  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15  
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a  
residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed  
and used in accordance with the instructions, may cause harmful interference to radio communications. However,  
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be determined by turning the equipment off and on, the user  
is encouraged to try to correct the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
FCC Warning  
To assure continued FCC compliance, the user must use grounded power supply cord and the provided  
shielded video interface cable with bonded ferrite cores. If a BNC cable is going to be used, use only a  
shielded BNC(5) cable. Also, any unauthorized changes or modifications not expressly approved by the  
party responsible for compliance could void the user's authority to operate this device.  
Notice for Japan  
This is a Class B product based on the standard of the Voluntary Control Council for Interference from Information  
Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may  
cause radio interference. Install and use the equipment according to the instruction manual.  
CE Conformity for Europe  
The device complies with the requirements of the EEC directive 89/336/EEC as amended  
by 92/31/EEC and 93/68/EEC Art.5 with regard to Electromagnetic compatibility, and 73/  
23/EEC as amended by 93/68/EEC Art.13 with regard to Safety.”  
ViewSonic  
G220f  
17  
 
   
®
ViewSonic Corporation  
 

Teac Stereo Amplifier AI 501DA User Manual
Technicolor Thomson Stereo System DPL911VD User Manual
Toshiba Blu ray Player BDX2150KC User Manual
Toshiba DVD Player SD M1401 User Manual
Toshiba Projector TLP X4100E User Manual
Traulsen Freezer G12000 User Manual
TRENDnet Security Camera TVIP512P User Manual
Uniden Two Way Radio GMR2889 2CK User Manual
Unigreen Lawn Mower Trolleys and Barrows User Manual
VocoPro Stereo System AIR NET User Manual