Video Products Computer Hardware VGA CMP User Manual

Aurora,Ohio 44202  
Fax: 330-562-1999  
VIDEO  
PRODUCTS  
INCORPORATED  
1275 Danner Drive  
Tel: 1-800-626-7801  
VPI  
INSTALLATION GUIDE FOR THE  
VGA-CMP  
INTRODUCTION  
The VPI VGA-CMP converts VGA video to component video.  
INSTALLATION  
1. Turn OFF power to video source and video display device.  
2. Connect a VEXT-3-MM VGA video cable (sold separately) from the video source to the female connector labeled "VGA" on  
the VGA-CMP.  
3. Connect a set of CMPEXT-3-MM 75 ohm RCA cables (sold separately) between the "Y", "Pb", and "Pr" connectors on the  
VGA-CMP and the like connectors on the video display device. Typically the "Y" connector is green, the "Pb" connector is  
blue, and the "Pr" connector is red.  
4. Plug in the AC adapter and connect it to the VGA-CMP.  
5. Turn ON power to the video source and video display device.  
Note: Additional video cable lengths (VEXT-6/10/15/25/35/50/75/100-MM and CMPEXT-6/12/25/50/75/100-MM) may be  
ordered from Video Products Inc by calling (800) 626--7801 (U.S) or 330-562-2622 or visit our website at www.vpi.us  
VEXT-xx-MM  
VGA-CMP  
(sold separately)  
CPU  
P M C - A V G  
HDTV  
w/ component  
video  
c n  
I
t s c u d o  
I
r
P
o e d V i  
V P  
CMPEXT-xx-MM  
(sold separately)  
9 VDC  
Adapter  
ADAPTER  
9VDC Adapter  
(supplied)  
VGA Video  
15HD Female  
Connector  
Component Video  
75 Ohm RCA  
Connectors  
Power  
Connector  
Left End View of VGA-CMP  
Right End View of VGA-CMP  
 

Teledyne Oxygen Equipment LXT 220 User Manual
Teledyne Respiratory Product MX300 I User Manual
Toastmaster Range RA12X1 User Manual
Toshiba Digital Camera PDR M11 User Manual
Toshiba DVD Player SD 5980 User Manual
Toshiba Laptop A200 Series User Manual
Tote Vision Computer Monitor LCD 562 User Manual
Toyota Automobile PRI11 0902ENUK 07 00 User Manual
Vizio Speaker System SR F1 User Manual
VTech Cordless Telephone LS6217 User Manual