Verilux Indoor Furnishings VD04 User Manual

IB  
VD04  
9ZajmZ  
AZ\VXn  
œ
ꢀCVijgVaꢀHeZXigjb ꢀ9Zh`ꢀVcYꢀIVWaZꢀAVbe  
 
IMPORTANT SAFETY INSTRUCTIONS  
CAUTION:  
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT  
DISMANTLE. THERE ARE NO SERVICEABLE PARTS INSIDE.  
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT  
EXPOSE THIS UNIT TO RAIN OR MOISTURE.  
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR  
PERSONAL INJURY:  
Turn off/unplug and allow to cool before replacing bulb or cleaning.  
Light bulbs get HOT quickly! Do not touch the bulb while the lamp is on.  
• Do not operate the lamp in close proximity to flammable or  
combustible vapors, such as aerosol (spray) products or where  
oxygen is being administered.  
• Use only the type of bulb and maximum wattage indicated by the  
manufacturer.  
• Never cover the lamp when it is in operation.  
Read these instructions – before using this lamp.  
Keep these instructions – for future reference.  
• Do not use this lamp in damp/humid or wet locations.  
• For indoor use only.  
• Clean only with dry cloth.  
• Do not defeat the safety purpose of the polarized plug. A polarized  
plug has two blades with one wider than the other. If the provided  
plug does not fit in your outlet, consult an electrician for replacement  
of the obsolete outlet.  
• Protect the power cord from being walked on or pinched particularly  
at plugs, convenience receptacles, and the point where it exits from  
the lamp.  
• Unplug this lamp during lightning storms or when unused for long  
periods of time.  
• If the lamp has been damaged in any way, such as power-supply  
cord or plug is damaged, liquid has been spilled or objects have  
fallen onto the lamp, the lamp has been exposed to rain or moisture,  
does not operate normally, or has been dropped, it should not be  
operated. There are no user serviceable parts within this lamp.  
SAVE THESE INSTRUCTIONS  
2
 
ASSEMBLY INSTRUCTIONS  
Before assembling, please review all instructions.  
1. Carefully lay out all parts on flat surface as shown in illustration.  
2. Screw post (B) into the base (A) and hand tighten.  
3. Next, Screw lamp upper assembly (C) into post (B) and hand  
tighten.  
4. Remove socket ring (F) from Socket (D). Fit lamp shade (E) onto  
socket (D) and replace the socket ring (F). Hand tighten the socket  
ring – do not over-tighten.  
5. Carefully screw one 60 watt Natural Spectrum® light bulb (included)  
into the socket.  
6. Plug lamp into an appropriate outlet and turn on the dimmer switch  
to the preferred brightness level.  
7. Save the packaging in case you need to send the lamp to Verilux for  
servicing.  
3
 
ASSEMBLY INSTRUCTIONS  
4
 
GENERAL PRECAUTIONS  
• Do not use with power supply voltage other than 120V AC  
• Avoid placing the lamp in areas that are dusty, humid/moist, lack  
ventilation, or are subject to constant vibration.  
• Not for use with light dimmers, timers, motion detectors, voltage  
transformers, or extension cords.  
• Do NOT use lubricating agent in bulb assembly.  
• The light bulb may become loose during transit. To reinstall the light  
bulb, see the bulb installation instructions on page 3.  
• Close supervision is recommended when this lamp is used by or  
near children, or others who may not understand the need for these  
precautions. Do not leave the lamp unattended during use.  
5
 
TROUBLESHOOTING  
Before requesting service on your Verilux® lamp please read the  
following:  
• Make sure all power connectors, cords, and plugs are inserted fully  
and securely.  
• Make sure there is power to the wall outlet or try another outlet – not  
connected to a dimmer.  
CARE & CLEANING  
Your Verilux® lamp is made from high quality materials that will last for  
many years with a minimum of care.  
Clean only with a soft dry cloth – DO NOT USE SOLVENTS OR  
CLEANERS CONTAINING ABRASIVES OR AMMONIA  
WARNING: To prevent risk of shock or personal injury  
when cleaning lamp, make sure you have turned off and  
unplugged the lamp, and allow sufficient time for the bulb  
to cool.  
6
 
One-Year Limited Warranty  
ATTENTION! ONCE OPENED, PLEASE DO NOT RETURN THIS PRODUCT TO THE  
STORE WHERE IT WAS PURCHASED FOR REPAIR OR REPLACEMENT!  
customer service department at 1-888-544-4865.  
This limited warranty is provided by:  
Verilux, Inc., 340 Mad River Park, Suite 1, Waitsfield, VT 05673  
Verilux® warrants this product to be free from defects in material and workmanship for a period of one year from  
the date of the original retail purchase. During the limited warranty period, Verilux, Inc. will, at its option, repair or  
replace defective parts of this product, at no charge to the customer, subject to the following limitations. This limited  
warranty does not include any postage, freight, insurance or delivery fees. This warranty does not cover damage,  
defect or failure caused by or resulting from accident, external destruction, alteration, modification, abuse, misuse, or  
misapplication of this product.  
If, during the first one year of ownership, this product fails to operate properly, it should be returned as specified below:  
Please pack the defective product in its original protective packing and box, with a copy of your sales receipt, along  
with $6.95 (check or money order to cover shipping and handling), and send to:  
For U.S. Postal Service Only:  
Verilux Warranty  
For Fed Ex & UPS Only:  
Verilux Warranty  
Service Center, c/o WTB  
Service Center, c/o WTB  
P.O. Box 119, West Redding, CT 06896  
32 Henry Street, Bldg 17A, Bethel, CT 06801  
Please allow 4-6 weeks before you receive the repaired or replaced product.  
ATTENTION: When returning a product, be aware that damage during shipping is the  
responsibility of the purchaser and will void any warranty claim. We recommend that  
you insure the shipment by shipper when returning this product or any parts. Be sure to  
return product in original packaging.  
Note: Verilux® recommends using a quality surge suppressor on all electronics equipment. Voltage variations  
and spikes can damage electronic components in any system. A quality suppressor can eliminate the vast  
majority of failures attributed to surges and may be purchased at electronics stores.  
Due to ongoing improvements, actual product may have slight variations from the product described in this manual.  
340 Mad River Park, Suite 1, Waitsfield, VT 05673  
Printed in China for Verilux, Inc.  
© Copyright 2007 Verilux, Inc. All rights reserved.  
 

Technicolor Thomson Camcorder LDK 100 User Manual
Toshiba Air Conditioner RAS 10JKCVP User Manual
TP Link Modem TD W8910G User Manual
Trane Air Conditioner PKG PRC002 EN User Manual
Traulsen Refrigerator UPT276 L User Manual
Uniflame Outdoor Fireplace GAD1399SP User Manual
Viking Range F21192 EN User Manual
Viking Ventilation Hood VIL1200 User Manual
Wagner SprayTech Paint Sprayer 329 User Manual
Weber Charcoal Grill 632770416666667 User Manual