Vector Marine Battery BD032806 User Manual

VEC415_Manual_NP_032806 4/18/06 12:20 PM Page 8  
VEC415  
TW O YEAR LIMITED WARRAN TY PRO GRAM  
This limited warranty program is the only one that applies to this product, and it sets forth all the  
responsibilities of Vector Manufacturing, regarding this product. There is no other warranty, other than  
those described herein. Any implied warranty of merchantability or fitness for a particular purpose on  
this product is limited in duration to the duration of this warranty.  
This Vector Manufacturing product is warranted, to the original purchaser only, to be free of defects in  
materials and workmanship for two years from the date of purchase without additional charge. The  
warranty does not extend to subsequent purchasers or users. Manufacturer will not be responsible for  
any amount of damage in excess of the retail purchase price of the product under any circumstances.  
Incidental and consequential damages are specifically excluded from coverage under this warranty.  
Slim Po1w0 0eWra tItnverter  
This product is not intended for commercial use. This warranty does not apply to damage to units from  
misuse or incorrect installation/ connection. Misuse includes wiring or connecting to improper polarity  
power sources.  
w ith USB Cha rg ing Port  
RETURN/ REPAIR POLICY: Defective products may be returned to manufacturer. Any defective product  
that is returned to manufacturer within 30 days of the date of purchase will be replaced free of charge.  
If such a product is returned more than 30 days but less than two years from the purchase date,  
manufacturer will repair the unit or, at its option, replace it, free of charge.  
If the unit is repaired, new or reconditioned replacement parts may be used, at manufacturers option.  
A unit may be replaced with a new or reconditioned unit of the same or comparable design. The  
repaired or replaced unit will then be warranted under the terms of the remainder of the warranty  
period. The customer is responsible for the shipping charges on all returned items. During the warranty  
period, manufacturer will be responsible for the return shipping charges to the customer in the United  
States.  
LIMITATIONS: This warranty does not cover accessories, such as charging adapters, bulbs, fuses and  
batteries, damage or defects resulting from normal wear and tear (including chips, scratches, abrasions,  
discoloration or fading due to usage or exposure to sunlight), accidents, damage during shipping to our  
service facility, alterations, unauthorized use or repair, neglect, misuse, abuse, failure to follow  
instructions for care and maintenance, fire, flood and Acts of God.  
If your problem is not covered by this warranty, call our Technical Support Department toll free at (866)  
584-5504 for general repair information and charges if applicable. You may also contact us through  
our website at www.vectormfg.com.  
STATE LAW RIGHTS: This warranty gives you specific legal rights. Some states do not allow limitations  
on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential  
damages, so the exclusions or limitations stated herein may not apply. This warranty gives the purchaser  
specific legal rights; other rights, which vary from state to state, may apply.  
TO REQUEST WARRANTY SERVICE FOR THIS PRODUCT: Contact Technical Support by telephone, fax  
or mail (see below). We suggest that you keep the original packaging in case you need to ship the unit.  
When returning a product, include your name, address, phone number, dated sales receipt (or copy)  
and a description of the reason for return and product serial number. After repairing or replacing the  
unit, we will make every effort to return it to you within four weeks.  
WARRANTY ACTIVATION: Please complete Warranty Activation Card and mail to Vector  
Manufacturing. Enter “VEC415” as Model and “100 Watt Slim Power Inverter” as Product Type. All  
Vector products must be registered within 30 days of purchase to activate this warranty. Mail the  
completed registration form, along with a copy of the original sales receipt, to:  
USER’S MAN UAL  
& WARRAN TY IN FO RMATIO N  
ATTN.: CUSTOMER SERVICE  
4140 SW 30th Ave., Ft. Lauderdale, FL 33312  
TOLL FREE: (866) 584-5504 • FAX: (954) 584-5556 •  
IMPO RTAN T SAFETY IN FO RMATIO N , SAVE THESE IN STRUCTIO N S  
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND  
THIS INSTRUCTIO NAL MANUAL. THIS MANUAL CO NTAINS IMPO RTANT  
INFORMATION REGARDING THE OPERATION AND WARRANTY OF THIS  
PRODUCT. PLEASE RETAIN FOR FUTURE REFERENCE.  
WARRANTY IS NON-TRANSFERABLE.  
BD032806  
4140 S.W. 30th Ave., Ft. Lauderdale, FL 33312  
Toll Free: (866) 584-5504  
© 2006 VECTOR MANUFACTURING  
MADE IN CHINA  
w w w .ve cto rm fg .co m  
8
 
VEC415_Manual_NP_032806 4/18/06 12:20 PM Page iv  
TABLE O F CO N TEN TS  
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Controls and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
How This Inverter Works . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
1
1
2
2
3
4
4
4
4
4
5
5
6
6
6
6
6
6
7
7
MAXX SST Soft Start Technology® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
®
Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Power Source Requirements and Runtimes . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Rated Versus Actual Current Draw of Equipment . . . . . . . . . . . . . . . . . . . . . . .  
Operation of the 115 Volt AC Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Operation of the USB Power Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Protective Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Operating Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Fuse Replacement (DC Accessory Adapter) . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Common Audio/ Visual Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Fault LED Lights/ Alert Buzzer Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Common Power Output Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
IN TRO DUCTIO N  
Thank you for purchasing the VEC 4 1 5 1 0 0 Wa tt Slim Po w e r In ve rte r w ith  
USB Ch a rg in g Po rt. This inverter can be used to operate personal electronics and  
mobile office equipment, such as: laptop computers, digital/ video cameras, MP3  
players, cell phones, PDAs, and more. It can also be used to recharge 110/ 120 volt  
AC devices that have an appropriate recharging adapter with a standard North  
American two- or three-prong plug.  
Please read this Users Manual carefully before use to ensure optimum performance  
and to avoid damage to this product.  
FEATURES  
100 watts output  
®
• MAXX SST Soft Start Technology®  
• Plug and play  
• Electronic circuit protection prevents damage due to overload/ insufficient ventilation  
(overheat condition)  
Low-battery protection — unit automatically shuts down when battery discharges  
below 10.7 volts  
• Automotive and airplane 12 volt DC adapters  
• 5 volt DC USB power port  
• Manual ON/ OFF Pushbutton with Bi-color Power/ Fault LED  
• Audible fault warning  
• Compact size, efficient and quiet  
• Convenient carrying case  
• Airplane Adapter  
1
 
VEC415_Manual_NP_032806 4/18/06 12:21 PM Page 2  
DC. The second stage is a MOSFET bridge stage that converts the high voltage DC  
into 115 volts, 60 Hz AC.  
Co n tro ls a n d Fu n ctio n s  
The DC-to-DC converter stage uses creative, high frequency, zero voltage switching  
power conversion techniques that replace the bulky transformers found in less  
technologically advanced models.The inverter stage uses advanced power MOSFET  
transistors in a full bridge configuration.  
1
Slim Po w e r In ve rte r O utp ut Wa ve fo rm  
The AC output waveform of this inverter is known as a modified sine wave. It is a  
stepped waveform that has characteristics similar to the sine wave shape of utility  
power. This type of waveform is suitable for most AC loads, including linear and  
switching power supplies used in electronic equipment, transformers, and small motors.  
The modified sine wave produced by this inverter has an RMS (root mean square)  
voltage of 115 volts. Most AC voltmeters (both digital and analog) are sensitive to  
the average value of the waveform rather than the RMS value. They are calibrated  
for RMS voltage under the assumption that the waveform measured will be a pure  
sine wave. These meters will not correctly read the RMS voltage of a modified sine  
wave. Non-TRUE RMS meters will read about 20 to 30 volts low when measuring the  
output of this inverter. For accurate measurement of the output voltage of this unit, use  
a TRUE RMS reading voltmeter such as a Fluke 87, Fluke 8080A, Beckman 4410 or  
Triplett 4200.  
1 1 5 vo lt AC O utp ut  
2
3
5
4
1 . INVERTER CARRY CASE  
2 . USB PO W ER PO RT  
CAUTIO N  
Re ch a rg e a b le De vice s  
3 . O N/ O FF PUSHBUTTO N/  
BI-CO LO R PO W ER/ FAULT LED  
4 . STANDARD NO RTH AMERICAN  
• Certain rechargeable devices are designed to be charged by plugging them  
directly into an AC receptacle. These devices may damage the inverter or the  
charging circuit.  
1 1 5 VO LT AC O UTLET  
6
5 . 1 2 VO LT DC/ AIRPLANE ADAPTER  
CO RD PO RT  
When using a rechargeable device, monitor its temperature for the initial ten  
minutes of use to determine if it produces excessive heat.  
6 . DETACHABLE 2 -PRO NG 1 2 VO LT DC  
ADAPTER CO RD  
If excessive heat is produced, this indicates the device should not be used with this  
inverter.  
7 . 1 2 VO LT DC VEHICLE ACCESSO RY  
7
ADAPTER  
8 . AIRPLANE ADAPTER CO RD  
This problem does not occur with most of the battery-operated equipment. Most of  
these devices use a separate charger or transformer that is plugged into an AC  
receptacle.  
HO W THIS IN VERTER W O RKS  
MAXX SST® So ft Sta rt Te ch n o lo g y®  
This inverter is an electronic device that converts low voltage DC (direct current)  
electricity from a battery to 115 volt AC (alternating current) household power. In  
designing this inverter, Vector has incorporated design techniques previously  
employed in computer power supplies. The result of these design innovations is a  
smaller, lighter and easier-to-use power inverter.  
Vectors Soft Start Technology gradually “ramps up” the inverters power to slowly start  
appliances that require a surge to get started. This gradual ramp up protects the  
inverter and the appliance, as well as the power source, from damage and failure.  
The Slim Power Inverter converts power in two stages. The first stage is a DC-to-DC  
conversion process that raises the low voltage DC at the inverter input to 145 volts  
2
3
 
VEC415_Manual_NP_032806 4/18/06 12:21 PM Page 4  
4. Rotate the plug slightly to make sure there is good contact.  
5. Push the ON/ OFF pushbutton to turn the unit ON.  
O PERATIN G IN STRUCTIO N S  
Once properly connected to a 12 volt DC power source, the ON/ OFF switch controls  
power to the unit. The bi-color LED indicator lights blue when the inverter is connected  
to DC power and the power pushbuton is set to ON. (If the bi-color LED indicator  
lights red, refer to the “Troubleshooting” section on page 7 of this manual.)  
6. The LED in the ON/ OFF Pushbutton will light blue, indicating a proper connection.  
7. If the inverter does not work, make sure the ignition/ accessory switch is actually  
powering the accessory outlet. Some vehicles require the ignition switch to be  
turned on.  
ALWAYS TURN THE INVERTER ON BEFORE THE CONNECTED DEVICE.  
8. Plug the USB-powered device into the inverters USB Power Port and operate  
normally.  
The standard North American 115 volt AC and USB outlets allow the user to operate  
multiple devices simultaneously. Simply plug the equipment into the unit and operate  
normally.  
N o te : En su re w a tta g e o f a ll e q u ip m e n t sim u lta n e o u sly p lu g g e d in to th e VEC4 1 5 d o e s  
n o t e x ce e d 1 0 0 w a tts co n tin u o u s.  
N o te s: Th is in ve rte r s USB Po w e r Po rt d o e s n o t su p p o rt d a ta co m m u n ica tio n . It o n ly  
p ro vid e s  
d e vice .  
5
vo lts/ 5 0 0 m A DC m a x im u m p o w e r to a n e x te rn a l USB-p o w e re d  
USB p o w e r o u tp u t is n o t co n tro lle d b y th e O N / O FF Po w e r p u sh b u tto n . USB  
p o w e r is a lw a y s o n w h e n th e Po w e r Co rd is co n n e cte d to a 1 2 vo lt DC p o w e r  
so u rce . Re m e m b e r to d isco n n e ct th e Po w e r Co rd fro m a n y p o w e r so u rce w h e n  
th e u n it is n o t in u se .  
Ra te d Ve rsu s Actu a l Cu rre n t Dra w o f Eq u ip m e n t  
Most electrical tools, appliances, electronic devices and audio/ visual equipment have  
labels that indicate the power consumption in amps or watts. Be sure that the power  
consumption of the item to be operated is below 100 watts. If the power consumption  
is rated in amps AC, simply multiply by the AC volts (115) to determine the power.  
Pro te ctive Fe a tu re s  
The inverter monitors the following conditions:  
Resistive loads are the easiest for the inverter to run; however, it will not run larger  
resistive loads (such as electric stoves and heaters), which require far more wattage  
than the inverter can deliver. Inductive loads (such as TVs and stereos) require more  
current to operate than do resistive loads of the same wattage rating.  
Low Battery Voltage — This condition is not harmful to the inverter, but could damage  
the power source, so the inverter will automatically shut down when input voltage  
drops below 10.7 volts DC.  
Input Voltage Too High — The inverter will automatically shut down when DC input  
voltage exceeds 15.0 volts, as this can harm the unit.  
For safety reasons, the unit will simply shut down if it is overloaded. To restart the unit,  
simply remove the load and press the ON/ OFF pushbutton to reset.  
Thermal Shutdown Protection — The inverter will automatically shut down when the  
unit becomes overheated.  
O p e ra tio n o f th e 1 1 5 Vo lt AC O u tle t  
Overload/ Short Circuit Protection — The inverter will automatically shut down when  
a short circuit occurs.  
1. Connect the Power Cord to the inverter.  
2. Connect either the 12 Volt DC Vehicle Accessory Adapter or the 12 Volt DC  
Airplane Adapter to the end of the 12 Volt Power Cord.  
AC Ground Leakage — The inverter will automatically shut down when leakage  
current exceeds safety level.  
N o te s: Th e LED in th e O N / O FF Pu sh b u tto n w ill lig h t re d to in d ica te a Fa u lt co n d itio n  
b e fo re a u to m a tic sh u td o w n o ccu rs.  
3. Insert the selected adapter Plug into a vehicles (or other 12 volt DC power  
sources) DC accessory outlet or airplane DC power outlet.  
4. Rotate the vehicle accessory plug slightly to make sure there is good contact.  
5. Push the ON/ OFF Pushbutton to turn the Inverter ON.  
If u n it sh u ts d o w n , tu rn it O FF, re m o ve th e lo a d , w a it a fe w m in u te s, th e n tu rn  
it b a ck O N .  
6. The LED in the ON/ OFF Pushbutton will light blue, indicating a proper connection.  
O p e ra tin g Tip s  
7. If the Inverter does not work, make sure the ignition/ accessory switch is actually  
powering the accessory outlet. Some vehicles require the ignition switch to be  
turned on.  
The 1 0 0 Wa tt Slim In ve rte r should only be operated in locations that are:  
DRY — Do not allow water or other liquids to come into contact with the inverter.  
COOL — Surrounding air temperature should ideally be 0-40°C (32-104°F). Keep  
the inverter away from direct sunlight, when possible.  
8. Plug the (110/ 120 volt AC) appliance into the Inverters three-prong AC outlet  
and operate normally.  
WELL-VENTILATED — Keep the area surrounding the inverter clear to ensure free air  
circulation around the unit. Do not place items on or over the inverter during  
operation. The unit will shut down if the internal temperature gets too hot. The inverter  
can be reset after it cools down.  
N o te : Th e In ve rte r w ill n o t o p e ra te a p p lia n ce s a n d e q u ip m e n t th a t g e n e ra te h e a t,  
su ch a s h a ir d ry e rs, e le ctric b la n k e ts, m icro w a ve o ve n s a n d to a ste rs.  
O p e ra tio n o f th e USB Po w e r Po rt  
1. Connect the Power Cord to the inverter.  
SAFE — Do not use the inverter near flammable materials or in any locations that may  
accumulate flammable fumes or gases. This is an electrical appliance that can briefly  
spark when electrical connections are made or broken.  
2. Connect either the 12 Volt DC Vehicle Accessory Adapter or the 12 Volt DC  
Airplane Adapter to the end of the 12 Volt Power Cord.  
3. Insert the selected adapter Plug into a vehicles (or jump-starters) DC accessory  
outlet or airplane DC power outlet.  
4
5
 
VEC415_Manual_NP_032806 4/18/06 12:21 PM Page 6  
Co m m o n Po w e r O u tp u t Pro b le m s  
CARE AN D MAIN TEN AN CE  
Po ssib le Ca use s  
Re co m m e n d a tio n s  
Sto ra g e  
Battery voltage  
below 10.7 volts  
Recharge battery or check  
DC power supply.  
1. Ideal storage temperature range is 0-40°C (32-104°F).  
2. Store and use the 1 0 0 Wa tt Slim Po w e r In ve rte r in a cool, dry place with  
Equipment being operated  
draws too much power  
Reduce load to maximum 100 watts.  
adequate ventilation for all-around air circulation.  
3. Avoid locations that are exposed to heating units, radiators, direct sunlight, or  
excessive humidity or dampness.  
Inverter in thermal  
shutdown condition  
Allow inverter to cool down. Ensure  
there is adequate ventilation around  
the unit, and the load is no more  
Fu se Re p la ce m e n t (1 2 Vo lt DC Acce sso ry Co rd )  
1. Unscrew the cap of the barrel end of the 12 Volt DC Cord (turning counter-  
clockwise) and lift off.  
than 100 watts for continuous operation.  
AC output is shorted  
Disconnect the AC appliance. Press the  
inverter ON/ OFF Power pushbutton to  
turn the unit OFF. Wait a few seconds,  
then press the pushbutton again to turn it  
back ON.  
2. Pull the fuse straight out.  
3. Replace with a new 10 amp fuse.  
4. Screw the cap back onto the plug (turning clockwise).  
TRO UBLESHO O TIN G  
SPECIFICATIO N S  
Output Power:  
Co m m o n Au d io / Visu a l Pro b le m s  
Problem: Buzzing Sound in Audio Systems  
100 watts continuous  
Output Voltage (RMS):  
Output Frequency:  
Output Waveform:  
DC Input :  
115 volts AC ±10%  
60Hz ±3Hz  
Some inexpensive stereo systems and boom boxes make a buzzing sound when  
operated from the inverter, because the power supply in the electronic device does  
not properly filter the modified sine wave produced by the inverter. The only solution  
to this problem is to use a sound system that has a higher quality power supply.  
Modified Sine Wave (MSW)  
13.8VDC, 8 Amps  
>85%  
Problem: Television Interference  
The 1 0 0 Wa tt Slim Po w e r In ve rte r is shielded to minimize interference with TV  
signals. However, in some instances, some interference may still be visible, especially  
when the TV signal is weak. Try the following to improve the picture:  
Efficiency:  
Low Voltage Audible Alarm:  
Low Voltage Shutdown:  
<11 Volts Input Voltage  
<10.7 Volts Input Voltage  
1. Move the 100 Watt Inverter as far away as possible from the TV set, the antenna,  
and the antenna cables. Use a short AC extension cord, if necessary.  
Operating/ Storage Temperature: 0-40°C (32-104°F)  
2. Adjust the orientation of the antenna cables, and the TV power cord to minimize  
interference.  
Operating/ Relative Humidity:  
5-95% non-condensing  
3. Make sure that the antenna feeding the TV provides an adequate (snow-free)  
signal and that high quality, shielded antenna cable is used.  
Fa u lt LED Lig h ts/ Ale rt Bu zze r So u n d s  
When the Power/ Fault LED turns from blue (indicating the unit is powered) to red and  
the alert buzzer sounds, a fault condition is present and the unit will automatically shut  
down shortly. See “Protective Features” on page 5 and “Common Power Output  
Problems” below.  
6
7
 

Taylor Weather Radio 5091 User Manual
Tiger Products Co Ltd Games 07 022 User Manual
Tiger Products Co Ltd Lawn Mower 5083E User Manual
Topcom Telephone COCOON 300 User Manual
Toshiba Security Camera IK TF5U User Manual
TRENDnet Switch TK400K User Manual
Tripp Lite IP Phone VP 24A User Manual
Uniden Telephone BC898T User Manual
Uniden Telephone DSS8955 User Manual
Vinotemp Refrigerator VT 26 User Manual