USB Active
Repeater Cable
(CB-USBARC)
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download
System Requirement
● Desktop or notebook computer with USB port
● One of the following operating systems (no driver needed):
Windows® 98SE
Windows® ME
Windows® 2000
Windows® XP
Mac X
Installation
The USB Active Repeater Cable is fully compatible with
plug and play specification under windows 98/SE, Windows
ME/2000/XP and MAC systems. There is no driver
installation needed when operates under these systems,
simply connect it with your PC (or USB Hub) and device
(or 2nd active repeater cable) and it’s ready to go.
Installation Verification
1. Go to System Properties in the Control Panel of your
system.
2. Go to Device Manager of System Properties to find a
device named Generic USB Hub in the Universal Serial
Bus Controllers directory to verify the installation completed.
3. Find a USB device such as USB mouse, USB printer, etc
in Device Manager to verify that your device is plugged
well to the USB 2.0 active repeater cable and ready to go.
Download from Www.Somanuals.com. All Manuals Search And Download
USB Active Repeater Cable
Model #: CB-USBARC
Download from Www.Somanuals.com. All Manuals Search And Download
|