VTech Mobility Scooter 91 002487 000 000 User Manual

User’s Manual  
TM  
3-in-1 Learning Zebra Scooter  
© 2010 VTech  
Printed in China  
91-002487-000-000  
 
INTRODUCTION  
Thank you for purchasing the VTech® Jungle Gym™ ꢀ-in-1 Learning  
Zebra Scooter™!  
The VTech® Jungle Gym™ ꢀ-in-1 Learning Zebra Scooter™ converts  
easily from push walker to ride-on to scooter. Kids can discover  
their wild side as they move with the zebra and explore new territory  
with the scooter’s walkie-talkie, compass and flashlight. The zebra’s  
mane features five light-up buttons that teach colors, animals and  
destinations. The scooter also features fun horn buttons and a volume  
control switch.  
LIGHT-UP BUTTONS  
HORN BUTTON  
SMILE  
BUTTON  
RECOGNITION SLOT  
MODE  
SELECTOR  
VOLUME  
CONTROL  
SWITCH  
BUCKET  
 
INCLUDED IN THIS PACKAGE  
One zebra head with  
electronic parts  
Two handles  
One seat  
One zebra body and two  
longer screws  
One big screw  
Three play pieces and  
one bucket  
Two front wheels  
One axle, one wheel  
fastener and one wheel  
cover with two shorter  
One user’s manual  
screws  
 
WARNING: All packing materials, such as tape, plastic sheets,  
wire ties and tags are not part of this toy, and should  
be discarded for your child’s safety.  
NOTE:  
Please keep this instruction manual as it contains  
important information.  
GETTING STARTED  
BATTERY INSTALLATION  
1. Make sure the unit is turned OFF.  
2. Locate the battery cover on the side of the  
zebra’s head. Use a screwdriver to loosen the  
screw.  
3. Install2newAA(AM-3/LR6)batteriesfollowing  
the diagram inside the battery box. (The use  
of new alkaline batteries is recommended for  
maximum performance.)  
4. Replace the battery cover and tighten the screw to secure.  
BATTERY NOTICE  
The use of new alkaline batteries is recommended for maximum  
performance.  
Non-rechargeable batteries are not to be recharged.  
Rechargeable batteries are to be removed from the toy before being  
charged (if removable).  
Rechargeable batteries are only to be charged under adult  
supervision (if removable).  
Do not mix old and new batteries.  
Do not mix batteries of different types: alkaline, standard (carbon-  
zinc) or rechargeable (nickel-cadmium).  
Only batteries of the same or equivalent type as recommended are  
to be used.  
Batteries are to be inserted with the correct polarity.  
 
Exhausted batteries are to be removed from the toy.  
The supply terminals are not to be short-circuited.  
The toy is not to be connected to more than the recommended  
number of power supplies.  
Do not dispose of batteries in fire.  
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE  
BATTERIES.  
ASSEMBLY INSTRUCTIONS  
With the VTech® Jungle Gym™ ꢀ-in-1 Learning Zebra Scooter™,  
safety comes first. To ensure your child’s safety, please only assemble  
this product by an adult.  
1. To install the front wheels onto the zebra  
body, first put one wheel on the end of  
the axle, then thread the axle through the  
zebra body. Attach the other wheel to the  
end of the axle.  
2. Attach the fastener to the end wheel,  
aligning the pin on the fastener with the  
hole in the axle. Push the pin down into  
the hole. Align the wheel cover over the  
fastener, then tighten the two shorter  
screws with a screwdriver.  
3. To attach the left and right handles to  
the zebra’s head, insert them into the  
corresponding holes on the sides of the  
head. You will hear a loud ‘click’ sound.  
This indicates that the handles are  
securely fixed into the head.  
 
4. Attach the zebra’s head to the body by  
snapping the head onto the body. You  
will hear it click into place. Please ensure  
the head is attached securely to the body.  
Once the head has been attached, it  
cannot be removed again.  
5. Turn the zebra over to tighten the two  
longer screws with a screwdriver. These  
are the screws that attach the neck to the  
body.  
6. Insert the big screw under the seat. You  
will hear a loud ‘click’ sound.  
7. Insert the seat into the hinges of the neck.  
You will hear a loud ‘click’ sound. This  
indicates the seat is securely fixed to the  
neck.  
Once the ꢀ-in-1 Learning Zebra Scooter™ is assembled, it cannot  
be disassembled.  
 
ATTENTION: The maximum weight for this product is ꢁ2 pounds.  
It is not recommended for children older than ꢀꢃ  
months.  
1. Before riding the scooter, please make sure the handle is  
securely locked in place.  
2. Please wear appropriate safety gear, including a helmet and  
knee pads, when riding the scooter.  
ꢀ. Please ride the scooter on a smooth surface, such as a sidewalk.  
Do not ride the scooter on the street, or on gravel, sand or  
water.  
ꢁ. Always ride the scooter during daylight. Avoid riding at night.  
ꢂ. Always wear shoes when riding the scooter.  
CONVERTING THE ꢀ-IN-1 LEARNING ZEBRASCOOTER  
1. To change to ride-on mode, put down  
the seat, making sure it locks into place.  
Hang the bucket on the peg on the front  
of the neck.  
2. To change to walker mode, squeeze the  
two locks under the seat to release the  
seat. Pull up the seat and the support on  
the scooter platform, propping the seat  
with the support. You will hear a loud  
‘click’ sound to indicate the seat and  
support are locked into place.  
 
3. Todisassemblethewalkermode, squeeze  
the two locks under the seat, then put  
down the support plate and the seat.  
4. To change to scooter mode, pull the seat  
up to meet the neck, and tighten the big  
screw under the seat.  
5. To disassemble the scooter mode, press  
and hold the black button on the side of the  
neck, then unscrew the big screw under  
the seat.  
PRODUCT FEATURES  
1. MODE SELECTOR  
To turn the unit ON, slide the MODE  
SELECTOR to the MUSIC MODE ( ),  
the FOLLOW THE LIGHTS MODE ( ),  
the ANIMAL MODE ( ) or the EXPLORE  
& LEARN MODE ( ) position. To turn  
the unit OFF, slide the MODE SELECTOR  
to the OFF ( ) position.  
 
2. VOLUME CONTROL SWITCH  
To adjust the volume, slide the VOLUME  
CONTROLSWITCH located on the head  
to LOW VOLUME ( ) or the HIGH  
VOLUME ( ) position.  
ꢀ. AUTOMATIC SHUT-OFF  
To preserve battery life, the VTech® Jungle Gymꢀ-in-1 Learning  
Zebra Scooter™ will automatically power-down after approximately  
45 seconds without input. The unit can be turned on again by  
pressing any button.  
ACTIVITIES  
1. Slide the mode selector to the Music  
Mode, Follow the Lights Mode, Animal  
Mode or Explore & Learn Mode position  
to turn the unit on. You will hear a song,  
playful phrase and a short tune. The  
lights will flash with the sounds.  
2. Place the flashlight, compass or walkie-  
talkie into the slot at the top of the zebra  
head to learn objects and directions.  
Upbeat short tunes and fun sounds will  
accompany the play. The lights will flash  
with the sounds.  
10  
 
3. Press the horn button on the left handle to  
hear fun horn sounds, a playful phrase, or  
a song depending on the selected mode.  
The lights will flash with the sounds.  
4. Press the smile button on the right handle  
to hear sounds and an encouraging  
phrase. The lights will flash with the  
sounds.  
5. Press the 5 animal light-up buttons to  
learn animals, animal sounds, scene  
and color. The animal buttons feature  
a lion, kangaroo, monkey, hummingbird  
and hippo with their scene (savannah,  
outback, jungle, mountain and river). The  
lights will flash with the sounds.  
6. In ride-on position, ride to meet animal  
friends, press the animal buttons to play  
games or learn something about that  
animal and where it lives. You’ll also learn  
colors. Place the bucket on the neck to  
hold the play pieces. The lights will flash  
with the sounds.  
11  
 
7. In walker position, push to play and place  
the bucket on the seat. You will hear fun  
sounds and melodies. The lights will flash  
with the sounds.  
8. In scooter position, step on the scooter to  
hear music! While a melody plays, scoot  
faster to make the music play faster. The  
lights will flash with the sounds.  
9. If there is no input to the unit after approximately 5 seconds, you  
will hear a question. After another 5 seconds if there is still no  
input, you will hear a fun sung song or an encouraging phrase.  
After another 5 seconds if there is still no input, you will hear some  
fun sounds and an encouraging phrase. After another 5 seconds if  
there is still no input, you will hear the phrase “Bye-bye,” then the  
unit will automatically power-down.  
MELODY LIST  
1. Polly Wolly Doodle  
2. Here We Go ‘Round the Mulberry Bush  
3. Pop! Goes the Weasel  
4. Row, Row, Row Your Boat  
5. Skip to My Lou  
6. Alouette  
12  
 
SONG LYRICS  
SONG 1  
Hop on and let’s ride.  
Roll and hit your stride.  
Then move to the beat.  
Learning is so neat!  
SONG 2  
Push, roll, we’re movin’ along.  
Playing with friends is full of fun!  
CARE & MAINTENANCE  
1. Keep the unit clean by wiping it with a slightly damp cloth.  
2. Keep the unit out of direct sunlight and away from any direct heat  
source.  
3. Remove the batteries when the unit is not in use for an extended  
period of time.  
4. Do not drop the unit on hard surfaces and do not expose the unit to  
moisture or water.  
TROUBLESHOOTING  
If for some reason the program/activity stops working or malfunctions,  
please follow these steps:  
1. Please turn the unit OFF.  
2. Interrupt the power supply by removing the batteries.  
3. Let the unit stand for a few minutes, then replace the batteries.  
4. Turn the unit ON. The unit should now be ready to play again.  
5. If the product still does not work, replace with an entire set of new  
batteries.  
If the problem persists, please call our Consumer Services Department  
 
1ꢀ  
at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, and a  
service representative will be happy to help you.  
For information on this product’s warranty, please call VTech® at 1-800-  
521-2010 in the U.S. or 1-877-352-8697 in Canada.  
IMPORTANT NOTE:  
Creating and developing Active Play products is accompanied by  
a responsibility that we at VTech® take very seriously. We make  
every effort to ensure the accuracy of the information, which forms  
the value of our products. However, errors sometimes can occur.  
It is important for you to know that we stand behind our products  
and encourage you to call our Consumer Services Department  
on at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada,  
with any problems and/or suggestions that you might have. A  
service representative will be happy to help you.  
Note:  
This equipment has been tested and found to comply with the limits for  
a Class B digital device, pursuant to Part 15 of the FCC Rules. These  
limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates, uses  
and can radiate radio frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will  
not occur in a particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try to correct  
the interference by one or more of the following measures:  
• Reorient or relocate the receiving antenna  
• Increase the separation between the equipment and receiver  
• Connect the equipment into an outlet on a circuit different from that  
to which the receiver is connected  
1ꢁ  
• Consult the dealer or an experienced radio/TV technician for help  
 
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC  
RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO  
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL  
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY  
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE  
THAT MAY CAUSE UNDESIRED OPERATION.  
THIS CLASS B DIGITAL APPARATUS COMPLIES WITH  
CANADIAN ICES-003.  
CETAPPAREILNUMÉRIQUE DE LACLASSE B ESTCONFORME  
À LA NORME NMB-003 DU CANADA.  
Caution: Changes or modifications not expressly approved by the party  
responsible for compliance could void the user’s authority to operate  
the equipment.  
1ꢂ  
 
WARNING:  
Riding the scooter requires adult supervision. Please supervise your  
child in order to avoid harm to the child and damage to the environment.  
91-0024487-007-000  
 

The Swan Corporation Indoor Furnishings KSEU 3020 User Manual
Thule Snowboard 91724 User Manual
Timex Watch W 89 User Manual
Transition Networks Cable Box C E 100BTX FRL 03 User Manual
Tripp Lite Network Cables N002 007 WH User Manual
Uniden Cordless Telephone ANA 9610 User Manual
Viking Marine Radio VE 9x12R Y 1 User Manual
Viper Vacuum Cleaner GV25 EU User Manual
Vivitek Home Theater System D5280U User Manual
VTech Handheld Game System Computer Pal In Concert User Manual