Universal Remote Control Universal Remote TRC 1280 User Manual

TRC-1280  
Owner’s Manual  
 
TRC-1280 TOUCH SCREEN  
Congratulations!  
1
2
3
3
3
4
5
5
5
5
6
6
6
6
7
7
7
7
8
8
9
Using the TRC-1280  
Connecting the Battery Pack  
Using the Charging Base  
Two-Way via WiFi  
Displaying the Settings Screen  
Sleep Settings  
Wireless Network Settings  
Brightness  
System  
Button Light  
Power  
Calibration  
Date and Time  
Sound & Vibration  
Pickup  
Factory Default  
Exit  
Maintaining Your TRC-1280  
Specifications  
USA Limited Warranty Statement  
Precautions and Information Concerning  
Rechargeable Lithium Polymer Batteries  
10  
Federal Communication Commission Interference  
Statement  
11  
12  
13  
Regulatory Information to the user  
Declaration of Conformity  
 
TRC-1280 TOUCH SCREEN  
Congratulations!  
Thank you for purchasing the Total  
Control TRC-1280 universal remote  
control. This unit can control every  
connected device in your home  
using the Total Control Advanced  
System Controller. You can also  
control devices located in different  
rooms via Wi-Fi. Controlling your  
home is simple with the TRC-1280  
remote.  
Two-way Instant-Wi-Fi controller with dazzling 2.8”  
color touch screen interface  
Receive two-way feedback for the rooms and music sources that can be  
controlled. Turn On/Off music while also viewing the current selections  
artist name, album and song title.  
Vibrating Haptic Technology confirms button presses  
The TRC-1280 has an Active Matrix color TFT display with vibrating  
Haptic feedback technology. When touching of an LCD button, the  
screen vibrates to confirm the button press.  
Includes rechargeable Lithium Polymer Batteries and charger base  
The TRC-1280 comes equipped with a Lithium Polymer battery that is  
rechargeable with the 6V charging base. You no longer need to waste  
money on disposable batteries or trying to locate misplaced batteries.  
Requires MRX-10 or compatible URC Advanced System  
Controller  
In combination with an MRX-10 or compatible URC Advanced  
System Controller, the TRC-1280 can control your system without  
being in line-of-sight of the equipment by sending the commands  
over your home network.  
Programmable only by URC certified professional programmer  
on-premises or off-premises via the Internet  
To fully automate your audio/video system, the programmer must  
have detailed knowledge of each component, LAN configuration,  
Wi-Fi optimization and how the system is connected and operated.  
With the ability to connect the TRC-1280 to an MRX-10 or  
compatible URC Advanced Controller, your installer can program the  
remote, with your permission, from his office should the need arise.  
Only a trained and certified professional audio/video installer can  
install a TRC-1280 remote control in a timely and efficient manner.  
Page 1  
 
TRC-1280 TOUCH SCREEN  
Using the TRC-1280  
The TRC-1280’s Main Menu pages display the activities and devices  
in your system. Press the Main page button to see what your choices  
are. Large systems may have more than one page. Press either of the  
Page buttons to see further options.  
Gently press any screen button with your finger to select an activity  
or a device. The screen will change to display the buttons you need  
for that activity/device. The Page buttons may reveal additional buttons  
for some devices and activities.  
When you would like to control another device, press the Main or  
Page buttons and select a new device from the Main page.  
The Main button  
always displays the  
Main menu pages.  
The Page buttons  
display additional  
pages of controls.  
The Volume and  
Mute buttons are  
always available  
regardless of what  
screen is displayed.  
The 5-way cursor  
buttons enables you  
to both scroll lists of  
artists, albums or  
songs from your  
Music Server on the  
TRC-1280 touch  
screen or to navi-  
gate TV guides and  
menus with ease.  
Page 2  
 
TRC-1280 TOUCH SCREEN  
Connecting the Battery Pack  
Unlock the rear cover by pressing down on the spring lock at the  
top of the cover. Remove the cover. For shipment from the factory,  
the battery is left out of the TRC-1280. Place the battery into the  
battery compartment, making sure you align the contacts on the  
battery to the contacts on the TRC-1280. The battery will snap into  
place when aligned properly. Replace the cover and snap it into  
place.  
Using the Charging Base  
Plug the 6V DC adapter into a power outlet  
and into the back of the charging base.  
Gently place the TRC-1280 into the cradle  
of the charging base. It automatically aligns  
itself to the contacts on the charging base.  
The Status light should immediately light.  
Red indicates that it is charging. Blue shows  
that it is fully charged. There is no harm in  
leaving the TRC-1280 on its charging base  
whenever it is not in use.  
Red indicates charging, Blue  
that the remote is fully charged.  
Two-Way via Wi-Fi  
To use the TRC-1280 with any two-way companion product, the  
TRC-1280 must be configured by your installer to be part of a LAN  
(local area network) via a Wi-Fi b/g access point or router. This is not  
user configurable. If you have any questions, consult your custom installer.  
Page 3  
 
TRC-1280 TOUCH SCREEN  
Displaying the Settings Screen  
You can enter the Settings menu by pressing and holding the  
MAIN and OK button for three seconds. Once there, if you do not  
press any button on the Settings screen, the TRC-1280 will timeout  
after 60 seconds and return to the previous setting or Main screen.  
There are two pages of Settings screens. To access the other page,  
press either of the Page buttons. To select a setting, press the buton  
on the LCD screen. To go back a step or to get out of the settings  
screen, press the MAIN button.  
There are two pages of Settings screen. To access the other page, press  
either of the Page buttons.  
Page buttons reveal the  
rest of the settings.  
Page 2 of the Settings  
Screen  
Page 4  
 
TRC-1280 TOUCH SCREEN  
Sleep Settings  
Wi-Fi and backlighting can be separately adjusted  
to conserve battery life. Note that when the  
backlight is set to turn off, the remote is not connected  
to the network. Picking up or waking the TRC-1280 will  
reconnect it to the Wi-Fi network.  
Wireless Network Settings  
WARNING! Only use this button when instructed  
to by Technical Support. The screen displays network  
information about your TRC-1280 and the wireless  
network it is connected to. Do not make any changes  
on this screen!  
Brightness  
Adjust the screen brightness by moving the slider.  
Min (minimum) is the dimmest setting and Max  
(maximum) is the brightest setting.  
System  
The System Information screen displays data about  
your TRC-1280's Operating System, Memory etc.  
Page 5  
 
TRC-1280 TOUCH SCREEN  
Button Light  
You can adjust the brightness of the LEDs that  
backlight the buttons of the TRC-1280. Move  
the slider left to dim the backlighting and move  
it right to brighten the backlighting.  
Power  
You can display the remaining charge by selecting  
Power. You can also adjust when the Low Battery  
warning screen will appear.  
Calibration  
To calibrate button presses, adjust the onscreen “tap” location with a  
pen top or PDA stylus. Using your fingers to calibrate the screen may  
result in inconsistent button presses.  
Date and Time  
Your TRC-1280 may have been programmed to  
display the time or date on the touch screen. If  
you need to, you can adjust the time displayed  
by changing the settings on this screen.  
Page 6  
 
TRC-1280 TOUCH SCREEN  
Sound & Vibration  
Adjust the volume and vibration levels by touching  
and dragging the slider to your desired Min/Max levels.  
Pickup  
You can set your TRC-1280 to only turn on when  
touched, or every time you move it. Simply select  
On or Off. Also you can adjust the pickup sensitivity  
with the slide bar.  
Factory Default  
WARNING! Only use this button when instructed to by Technical  
Support. It resets the memory of the TRC-1280 to the factory settings.  
All your programming will be lost!  
Exit  
When you have finished adjusting Settings, simply tap the Exit button to  
return to normal operation.  
Page 7  
 
TRC-1280 TOUCH SCREEN  
Maintaining Your TRC-1280  
Be careful not to scratch the touch screen, only use your finger to tap the  
LCD touch screen or use a plastic pen top or PDA stylus. Never use a real  
pen, pencil or any other sharp object on the screen. Keep it away from  
extreme cold or heat. The TRC-1280 is not waterproof. Do not use it in any  
location that is damp or wet. If you spill water on it, take out the battery  
pack and let the TRC-1280 dry for 48 hours before you try powering it up  
again. If you spill coffee or another beverage on it, clean it with distilled  
water. Make sure no water gets inside the TRC-1280. The touch screen con-  
tains a glass element. Be careful to not drop the TRC-1280 or slam it against  
anything.  
Use a soft, damp cloth to clean the screen. If the screen still shows finger  
prints, clean it with watered down window-cleaner. Do not use anything  
abrasive and don’t use too much water, some might leak into the interior.  
Specifications  
Microprocessor: 533MHz ARM9  
RAM: 128Mbyte Mobile DDR  
NAND: 128Mbyte  
LCD: 2.8 Inch Screen (240 by 320) LCD Backlighting by LED  
Sound: Mono 1 watt  
Devices: Supports up to 255 Devices with text, less with heavy graphics  
usage Pages: Supports up to 255 Pages on each Device with text, less with  
heavy graphics usage  
Macro Capability: Up to 255 steps each, however nesting is allowed  
Wi-Fi: IEEE 802.11B(11Mbps), G(54Mbps)  
Battery: Lithium polymer, 2400mAh  
Battery Charging Time: 5 Hours  
Dimensions: 8.8” Height x 2.3” Wide x 0.9" Thick  
Battery Warranty: 1 Year  
Weight (without AC Adapter): 7.8 oz  
Page 8  
 
TRC-1280 TOUCH SCREEN  
USA Limited Warranty Statement  
Your Universal Remote Control, when delivered to you in new condition,  
is warranted against defects in materials or workmanship as follows:  
UNIVERSAL REMOTE CONTROL, INC. warrants this product against  
defects in material or workmanship for a period of one (1) year and as set  
forth below. Universal Remote Control will, at its sole option, repair the  
product using new or comparable rebuilt parts, or exchange the product  
for a comparable new or rebuilt product. In the event of a defect, these  
are your exclusive remedies.  
This Limited Warranty covers only the hardware components packaged  
with the Product. It does not cover technical assistance for hardware or  
software usage and it does not cover any software products whether or  
not contained in the Product; any such software is provided "AS IS" unless  
expressly provided for in any enclosed software Limited Warranty.  
To obtain warranty service, you must deliver the product, freight prepaid,  
in its original packaging or packaging affording adequate protection to  
Universal Remote Control at the address provided in the Owner's Manual.  
It is your responsibility to backup any macro programming, artwork,  
software or other materials that may have been programmed into your  
unit. It is likely that such data, software, or other materials will be lost  
during service and Universal Remote Control will not be responsible for  
any such damage or loss. A dated purchase receipt, Bill of Sale, Installation  
Contract or other verifiable Proof of Purchase is required. For product  
support and other important information visit Universal Remote Control's  
website: http://www.UniversalRemote.com or call the Customer Service  
Center (914) 835-4484.  
This Limited Warranty only covers product issues caused by defects  
in material or workmanship during ordinary consumer use. It does  
not cover product issues caused by any other reason, including but  
not limited to product issues due to commercial use, acts of God, third-  
party installation, misuse, limitations of technology, or modification of  
or to any part of the Universal Remote Control product. This Limited  
Warranty does not cover Universal Remote Control products sold  
as USED, AS IS, REFURBISHED, so-called “B STOCK” or consumables  
(such as batteries). This Limited Warranty is invalid if the factory-applied  
serial number has been altered or removed from the product. This Limited  
Warranty is valid only in the United States of America. This Limited  
Warranty specifically excludes products sold by unauthorized resellers.  
Page 9  
 
TRC-1280 TOUCH SCREEN  
LIMITATION OF REMEDIES  
UNIVERSAL REMOTE CONTROL SHALL NOT BE LIABLE FOR ANY  
INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF  
ANY EXPRESS OR IMPLIED WARRANTY OR CONDITION ON THIS  
PRODUCT. IN NO EVENT SHALL UNIVERSAL REMOTE CONTROL  
BE LIABLE, WHETHER IN CONTRACT OR IN TORT (INCLUDING  
NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE  
PRICE OF THE PRODUCT, ACCESSORY OR SOFTWARE, OR FOR  
ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL  
DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS,  
LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, SOFT-  
WARE OR APPLICATIONS OR OTHER FINANCIAL LOSS ARISING  
OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY  
TO USE THE PRODUCTS, ACCESSORIES OR SOFTWARE TO THE  
FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW.  
EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, THERE  
IS NO OTHER WARRANTY EXPRESSED OR IMPLIED. UNIVERSAL  
REMOTE CONTROL WILL NOT BE HELD RESPONSIBLE FOR STATE-  
MENTS MADE BY OTHERS CONCERNING THE MERCHANTABILITY  
OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT.  
Some states or jurisdictions do not allow the exclusion or limitation of  
incidental or consequential damages, or allow limitations on how  
long an implied warranty lasts, so the above limitations or exclusions  
may not apply to you. This Limited Warranty gives you specific legal  
rights and you may have other rights which vary from state to state or  
jurisdiction to jurisdiction.  
REV020708  
Precautions and Information Concerning  
Rechargeable Lithium Polymer Batteries  
If you will not be using your remote control for an extended  
period of time, be sure to remove the battery  
Do not attempt to disassemble, alter or apply heat to the battery.  
Use care to avoid dropping the battery or subjecting it to severe  
impact that could damage the case.  
The battery should not be immersed in water.  
Lithium Polymer Batteries are recyclable. For the address of a  
recycle drop-off location near you call toll free 1-800-822-8837  
Page 10  
 
TRC-1280 TOUCH SCREEN  
Federal Communication Commission  
Interference Statement  
This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are  
designed to provide reasonable protection against harmful interference in a  
residential installation. This equipment generates, uses and can radiate radio  
frequency energy and, if not installed and used in accordance with the instructions,  
may cause harmful interference to radio communications. However, there is  
no guarantee that interference will not occur in a particular installation. If this  
equipment does cause harmful interference to radio or television reception,  
which can be determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one more of the following  
measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that  
to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
Warning!  
Changes or modifications not expressly approved by the manufacturer could  
void the user's authority to operate the equipment.  
Note : The manufacturer is not responsible for any Radio or TV interference  
caused by unauthorized modifications to this equipment. Such modifications  
could void the user's authority to operate the equipment.  
FCC Caution  
This device complies with Part 15 of the FCC Rules. Operation is subject to  
the following two conditions: (1) this device may not cause harmful interference,  
and (2) this device must accept any interference received, including interference  
that may cause undesired operation.  
Any changes or modifications not expressly approved by the party responsible for  
compliance could void the authority to operate equipment.  
The antenna(s) used for this transmitter must not be co-located or operating in  
conjunction with any other antenna or transmitter.  
Federal Communication Commission (FCC) Radiation Exposure Statement  
This remote device is approved as a hand-held and hand-operated only portable  
(relative to hand) device which is normally operated at 20 cm from a person’s  
body.  
Page 11  
 
TRC-1280 TOUCH SCREEN  
Regulatory Information to the user  
CE conformity Notice  
Products with “CE” marking comply with the R&TTE Directive  
1995/5/EC, EMC Directive 2004/108/EC and Low Voltage  
Directive 2006/95/EEC issued by the commission of the European  
Community.  
1) R&TTE Directive  
Safety  
EMC  
RF  
: EN 60950-1  
: ETSI EN 301 489-1,3, 17  
: ETSI EN 300 220-1,2  
: ETSI EN 300 328  
2) EMC Directive  
Emission  
: EN 55022  
: EN 55024  
: EN-61000-3-2, 3  
Immunity  
Power  
3) Low Voltage Directive  
Product safety : EN 60950-1  
Safety instruction for charging internal rechargeable battery of  
remote control Caution  
Use only with EN60950-1 approved as Limited power source and  
double insulation( ) marked power adaptor & same ratings  
described on the product label (6Vdc, 2.0A).  
Declaration of Conformity  
“Hereby, Universal Remote Control Inc. declares that this TRC-1280  
is in compliance with the Essential requirements and other relevant  
provisions of Directive 1999/5/EC.”  
Certification  
Type No.(Model No.) TRC-1280  
Batch/Serial No.  
Power Rating  
-
6.0V  
, 2.0A  
Frequency band  
WiFi: IEEE 802.11B(11Mbps), G(54Mbps)  
Page 12  
 
TRC-1280 TOUCH SCREEN  
Declaration of Conformity  
Company Name  
Company Address  
Contact Information  
Brand Name  
:
:
:
:
:
:
Universal Remote Control Inc.  
500 Mamaroneck Avenue, Harrison, NY 10528, U.S.A  
Phone: (914)835-4484 Fax: (914)835-4532  
UNIVERSAL remote control  
Product Name  
RF Remote Controller  
TRC-1280  
Model Name  
This product herewith complies with the requirements of EMC Directive (2004/108/EC)  
and R&TTE Directive(1995/5/EC) issued by the Commission of the European Community  
Compliance with these directives implies conformity to the following European Community  
EMC Directive  
EN 55022  
EN 55024  
EN 61000-3-2  
EN 61000-3-3  
R&TTE Directive  
EN 60950-1  
ETSI EN 301-489-1,3,17  
ETSI EN 300 220-1,2  
ETSI EN 300 328-  
List of test reports and/or certificate verified compliance with the standards above  
EMC Directive  
Report No.  
Testing Laboratory  
: Gumi College EMC Center  
R&TTE Directive  
Certificate No.  
Certificate Body  
: TUV Rheinland (No. 0197)  
Date of issue  
:
:
May 30, 2010  
James Novak  
Name and signature of authorized person  
Senior Product Manager  
Universal Remote Control Inc.  
Page 13  
 
NOTE  
Page 14  
 
NOTE  
Page 15  
 
 
500 Mamaroneck Avenue, Harrison, NY 10528  
Phone: (914) 835-4484 Fax: (914) 835-4532  
OCE-0073C Rev 02  
 

Taylor Scale 7409 User Manual
Teledyne Fan 2150EX User Manual
Teledyne Marine Sanitation System HFC E 202 User Manual
Toshiba DVD Player SD 6915SU User Manual
Toshiba Printer BSX5TTS22QMR User Manual
Transcend Information MP3 Player TS4G User Manual
Triarch Indoor Furnishings 33223 User Manual
Vector Automobile Parts VEC012APC User Manual
VTech Cordless Telephone cs5121 User Manual
VTech Cordless Telephone CS6719 User Manual