TS200 High-Definition
Speaker
Haut-parleur haute
définition BTS200
Questions? Problems?
or call our Customer Service line at 800-292-2294.
Questions? Problèmes?
ou en communiquant avec le soutien à la clientèle au 800-292-2294.
© 2011 Printed in Vietnam/Imprimé au Vietnam
UFZZ01054ZC(0)
Important Safety Instructions
•
Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or
near a swimming pool.
•
•
Do not use this product while driving.
Use only the power cord indicated in this manual. Do not expose the device to flames or dispose of it in a fire: the battery may
explode. Check with local authorities for possible battery disposal instructions.
•
•
Do not disassemble, modify, or attempt to repair any component of this product.
Check the laws and regulations on the use of mobile phones and hands-free equipment in the areas where you drive. Always give
full attention to driving and pull off the road and park before making or answering a call if driving conditions require.
SAVE THESE INSTRUCTIONS!
is a trademark of SRS Labs, Inc.
WOW HD technology is incorporated under license from SRS Labs, Inc.
BTS200 HIGH-DEFINITION SPEAKER
Uniden’s BTS200 high definition Bluetooth speaker provides clear stereo sound in a
compact, portable package. With Bluetooth V2.1 compatibility, the BTS200 pairs with your
cell phone to become a speakerphone for hands free conversations. You can also connect
your music player (wired or wireless) for crisp, clear audio.
•
Bluetooth V2.1 + EDR.
English - 3
•
•
Up to 2 Bluetooth devices can be paired with your speaker.
Supporting A2DP/AVRCP/HFP profiles.
-
-
-
A2DP: Advanced Audio Distribution Profile
AVRCP: Audio/Video Remote Control Profile
HFP: Hands Free Profile
•
•
•
•
•
•
Rechargeable Lithium-Ion polymer battery.
Portable
Up to 7 hours of play from a fully-charged battery.
Call Waiting feature
Mute feature
SRS WOW HD™
The BTS200 speaker is not a data storage device; do not attempt to copy files to it.
What’s Included
•
•
•
BTS200 Speaker
AC Adapter (PS-0043)
Lithium-Ion polymer battery (BT-1026)
4 - English
SET UP YOUR BTS200 SPEAKER
Install the Battery
1. Remove the battery from any protective packaging and discard the packaging
accordingly.
2. Align the battery pack with the guides along the inside of the battery area. Be sure the
contact slots are in the correct position to close on the contacts.
3. Slide the battery in until you hear the latch click.
Charge the Battery
1. Insert the adapter’s DC jack into the DC connection.
2. Plug the adapter into a 120 VAC power supply (standard wall outlet).
3. The middle LED lights to indicate the battery is charging and goes off when complete.
Your battery must be fully charged (more than 7.5 hours) before you can use your speaker.
Turn on Your Speaker
When you turn on your speaker for the first time, it automatically goes into pairing mode.
The Bluetooth LED ( ) flashes rapidly and is ready to pair (see page 6). The next time you
turn on your speaker, it searches for already paired devices and then moves into a standby
state.
English - 5
1. Press and hold
for at least 3 seconds.
2. All LEDs light and a power on tone sounds.
3.
4.
and
LEDs go out.
flashes slowly while looking for Bluetooth devices. It remains steady on when
Bluetooth devices are discovered; otherwise, it goes out.
To turn off the speaker: Press and hold
for at least 3 seconds.
Pair Bluetooth Devices to Your Speaker
Pair First Bluetooth Device
Pair your first Bluetooth device to your speaker when you turn your speaker on for the first
time. Be sure your speaker is in pairing mode when you pair your second Bluetooth device
(see step 1-2 of “Pair Second Bluetooth Device”on page 7).
1. Select a Bluetooth V2.1 or above device (mobile phone or music player) to pair.
2. Select the Searching mode on your Bluetooth device (refer to your Bluetooth device’s
owner’s manual for details if necessary).
3. Your Bluetooth device should find BTS200; select it and use 0000 for a pairing code if
necessary.
4. Verify that you are connected to your speaker. The Bluetooth LED ( ) moves to a
steady ON state when pairing is complete.
6 - English
Pair Second Bluetooth Device
1. Turn on your speaker, and continue to press and hold
until the speaker beeps twice.
2. Release
. The BTS200 is ready to pair.
3. Follow the same procedures for pairing your first Bluetooth device (see page 6).
GETTING TO KNOW THE BTS200 SPEAKER
BTS200 Top/Front
Key name
Icon
Press to ...
MUTE
Power LED
Microphone
Bluetooth link LED
Mute the microphone on your
speaker during a call.
Mute
TALK
Handle phone calls.
talk
POWER
Turn on your BTS200 speaker.
Power
DOWN
UP
Battery
Release
Decrease the volume.
Increase the volume.
Down
uP
PLAY/PAUSE
Start, pause, and stop music.
Play/Pause
English - 7
BTS200 Side
Battery release
latch
Battery
indicator
button
USB port
Battery
indicator
LEDs
Use this...
To...
Battery indicator button
Display the level of power left in the battery through the
LEDs.
Battery Indicator LEDs
USB port
Display the remaining power level when you press the
battery indicator button (see page 18).
Use the BTS200 battery to charge your cell phone (see
page 14).
Battery release latch
Unlock the battery for removal.
8 - English
BTS200 Back
Power
adapter
input
3.5mm Audio In
jack
Bass
output
Use this...
To...
Audio In
Insert the audio cable’s plug.
Hear the bass sound.
Bass output
DC 5.4V
Insert the power adapter.
English - 9
LEDs
Icon
Status
Meaning
Power
On (green)
BTS200 is turned on and operating.
Off
BTS200 is turned off.
Slow blink
Fast blink
Steady on
Off
BTS200 is looking for paired Bluetooth devices.
BTS200 is ready to pair to a Bluetooth device.
BTS200 is connected to a Bluetooth device.
BTS200 is not connected to a Bluetooth device.
Bluetooth
BTS200 SPEAKER OPERATION
Press and hold
for at least 3 seconds to turn on your speaker.
The and
keys control the speaker’s volume level during cellphone operation and
music playback. Press and release the keys to increase or decrease the volume level one
step at a time. Press and hold and to quickly raise and lower the volume levels.
Your speaker sounds an alert tone when it reaches the maximum upper and lower volume
levels.
10 - English
Basic Cell Phone Operations
The green
LED flashes when your cellphone has an incoming call. Both the speaker and
your cellphone may ring, depending on your cellphone settings.
To...
Do this...
Answer an incoming call
Reject an incoming call
Press
.
Press and hold
and
.
End a call
Press
Press
Press
.
Mute the microphone
Unmute the microphone
. The
LED turns red.
again. The
LED turns off.
and at the same time. The
Redial the last incoming
number
From standby, press
LED is steady green.
From standby, press and hold
steady green.
. The
LED is
Redial the last number dialed
Download from Www.Somanuals.com. All Manuals Search And DownElonagd.lish - 11
Call Waiting
You can receive call waiting notification when your cellphone is paired to your speaker. The
LED flashes and your speaker sounds an alert tone.
Your cellphone must subscribe to Call Waiting service to use these features;
contact your telephone provider for more information.
To...
Do this...
Press and release
existing call is put on hold and the second call is now
active.
and
at the same time. The
Answer a call waiting call
and put first call on hold
Answer a call waiting call
and hang up first call
Press
active.
; the first call is ended and the call waiting is now
Reject a call waiting call
End a call waiting call
Press and hold
and
at the same time.
Press ; if the first call was on hold, it is now active.
12 - English
Basic Music Operation
When you pair a Bluetooth music player to your speaker, you can control operation through
your speaker.
To...
Do this...
Press
.
NOTE: When you stop or pause the music playback, your speaker starts
streaming music into a buffer. The music resumes at the same volume level
Play music
after you press
.
Skip to the next
track
Press
Press
and
and
at the same time.
at the same time.
Skip to the
previous track
Control the volume
Pause music
Press
Press
to increase or
when the music is playing
while the music is playing.
to decrease the volume.
Stop playing music
Press and hold
Download from Www.Somanuals.com. All Manuals Search And DownElonagd.lish - 13
SPECIAL FEATURES
Charge Cellphone using a USB Cable
If you have the proper fitting USB cable (not included), you can charge your cellphone
through your speaker. Be sure you have a USB cable that will fit both USB connections - the
one on your speaker and the one on your cellphone.
1. Connect the USB cable to your cellphone and to your speaker.
2. There are no specific charging LEDs on your speaker; however, any charging LEDs on
your cellphone may blink accordingly.
After you charge your cellphone using your speaker’s battery, be sure you recharge your speaker.
Play Music through a Wired Connection
You can still play music through your BTS200 speaker even if your music device is not
paired to your speaker. You can physically connect your music device to your speaker with a
cable having a 3.5 mm minijack at one end (not included).
1. Plug one end of the cable into your music device, just like you would a pair of
headphones.
2. Plug the other end of the cable into your speaker’s 3.5 mm jack labeled auDio in
.
3. Use your music device to start and control music playback through your speaker.
14 - English
The following restrictions apply when you are playing music through a wired connection:
•
•
•
If both a Bluetooth device and a wired device are connected to your speaker, the
Bluetooth device will take priority over the wired device.
The BTS200 does not control the wired device; it only plays music through a wired
connection. It cannot operate
or skip . You must use the wired device to do that.
If you are listening to music from the wired device and you press
start playing music from the Bluetooth device if available.
, your speaker will
Manage SRS WOW HD™ On/Off
The BTS200 speaker utilizes SRS WOW HD™ technology. WOW HD™ significantly improves
the playback quality of audio, delivering a dynamic 3D entertainment experience with
deep, rich bass and high frequency clarity for crisp detail.
You can turn SRS on or off (default = on). Your speaker retains the SRS setting during power
off.
To fully utilize SRS, turn the EQ setting on your music device to OFF.
1. Press
and
at the same time when the music is playing.
2. If you hear a single acknowledgement tone, you have turned SRS off. If you hear a
double acknowledgement tone, you have turned SRS back on.
Download from Www.Somanuals.com. All Manuals Search And DownElonagd.lish - 15
TROUBLESHOOTING
If this happens...
Try this...
Bluetooth device disconnects
Press
to reconnect.
Bluetooth device disconnects
due to Out of Range
After moving back into connection range, press
key for reconnection.
Sound is not clear or there is
no sound at all
Check BTS200 or your Bluetooth device volume level.
– Make sure your Bluetooth device has A2DP.
Music won’t play on the
BTS200
– Check if both devices are connected.
– Turn your BTS200 off and then back on to auto-
connect with your Bluetooth device.
The BTS200 volume controls
are not working.
– Change the volume from your Bluetooth device.
– Check the battery level.
– Make sure BTS200 is turned on.
LED No Power
– Make sure BTS200 is charged.
16 - English
If this happens...
Try this...
Sound is too small / too much
distortion
Adjust the volume level of BTS200 or Bluetooth device.
– Make sure your cellphone has HFP.
Phone call not answer by
BTS200
– Check if both devices are connected.
– Restart BTS200 for auto-connecting with your
Bluetooth device.
Music doesn’t play after
hanging up a call
Press
to resume music.
BTS200 doesn’t control the
music
Make sure your Bluetooth device has AVRCP.
Reset your BTS200 Speaker
1. Turn off the BTS200.
2. Press
3. The
,
, and
LEDs flash and then go dark.
, and keys. Your speaker has reset after it has completely shut
keys at the same time. Hold for several seconds.
and
4. Release
down.
,
Download from Www.Somanuals.com. All Manuals Search And DownElonagd.lish - 17
Battery Features
Your BTS200 comes equipped with a rechargeable Lithium-Ion polymer battery. You can
recharge the battery by connecting it to 120 VAC power through the AC adapter.
Install and Charge the Battery
See page 5 for details on installing and charging the battery (the same procedures as for
initial turnup).
Remove the Battery
1. Press down on the battery latch to release the battery.
2. With the battery latch pressed down, press down and push out the opposite end of the
battery to slide it out of the battery compartment.
Check the Battery Level
Press the battery indicator button while the AC adapter is not connected to your speaker
(see page 8). The battery LEDs light according to how much power remains in the battery:
•
•
•
3 LEDs = 100 - 70% remaining
2 LEDs = 70 - 35% remaining
1 LED
=
35 - 15% remaining
18 - English
•
0 LEDs = Less than 15% power remaining. When the battery level falls below 15% (0 LED)
status, the speaker sounds alert tones (four-beep pattern).
SPECIFICATIONS
•
•
•
•
•
•
Total 4W output (2W / Channel)
Full-range (50mm) driver / Channel + Passive Radiator
Li-Ion polymer Batt: 2950mAh
Playtime: up to 7 hours in 80% Volume
Recharging Time: 7.5 hours
Range: Class 2
Bluetooth Compatibility
Bluetooth V2.1 or above device with A2DP/AVRCP/ HFP
Safety and Handling Information
For maximum product life, do not drop, throw, or crush the speaker. Do not expose it to humidity, dust, or temperatures above 125°F
(51.6°C).
Download from Www.Somanuals.com. All Manuals Search And DownElonagd.lish - 19
FCC Notice
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired
operation. Privacy of communications may not be ensured when using this product.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate this device.
To insure the safety of users, the FCC has established criteria for the amount of radio frequency energy various products may produce
depending on their intended usage. This product has been tested and found to comply with the FCC’s exposure criteria. Use of other
accessories may not ensure compliance with FCC RF exposure guidelines and should be avoided.
20 - English
Industry Canada statement
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
IMPORTANT NOTE: Radiation Exposure Statement
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End users must follow the
specific operating instructions for satisfying RF exposure compliance. To maintain compliance with IC RF exposure compliance
requirements, please follow operation instruction as documented in this manual.
Lithium-Ion polymer battery information
This device contains a lithium-ion polymer battery. The battery must be recycled or disposed of properly. Contact your local waste
management office for information on battery recycling or disposal.
One-Year Limited Warranty
Evidence of original purchase is required for warranty service.
WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”)
ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free from defects in
materials and craftsmanship with only the limitations or exclusions set out below.
WARRANTY DURATION: This warranty to the original user shall terminate and be of no further effect 12 months after the date of
original retail sale. The warranty is invalid if the Product is a) damaged or not maintained as reasonable or necessary, b) modified,
Download from Www.Somanuals.com. All Manuals Search And DownElonagd.lish - 21
altered, or used as part of any conversion kits, subassemblies, or any configurations not sold by Uniden, c) improperly installed,
d) serviced or repaired by someone other than an authorized Uniden service center for a defect or malfunction covered by this
warranty, e) used in any conjunction with equipment or parts or as part of any system not manufactured by Uniden, or f) installed or
programmed by anyone other than as detailed by the owner’s manual for this product.
STATEMENT OF REMEDY: In the event that the product does not conform to this warranty at any time while this warranty is in effect,
warrantor will either, at its option, repair or replace the defective unit and return it to you without charge for parts, service, or any
other cost (except shipping and handling) incurred by warrantor or its representatives in connection with the performance of this
warranty. Warrantor, at its option, may replace the unit with a new or refurbished unit.
THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTY PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND
EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS, IMPLIED OR ARISING BY OPERATION OF LAW,
INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS
WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Some states do not allow this exclusion or limitation of incidental or consequential damages so the above limitation or exclusion
may not apply to you.
LEGAL REMEDIES: This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. This
warranty is void outside the United States of America and Canada.
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after following the instructions in the owner’s manual you are certain
that the Product is defective, pack the Product carefully (preferably in its original packaging). The Product should include all parts
and accessories originally packaged with the Product. Include evidence of original purchase and a note describing the defect that has
caused you to return it. The Product should be shipped freight prepaid, by traceable means, to warrantor at:
Uniden America Service
4700 Amon Carter Blvd.
Fort Worth, TX 76155
22 - English
|