Uniden Cordless Telephone D13842BK User Manual

D1384 Series User's Guide  
What's in the box?  
You will also find:  
Accessory handset  
and charger  
D1384 base with  
Not pictured:  
x Rechargeable  
battery (BT-1021)  
answering system  
and cordless  
handset  
x Battery cover  
x AC adapter  
(PS-0035)  
You should  
have:  
None  
If you purchased  
model number:  
D1384  
Not pictured:  
x Rechargeable battery (BT-1021)  
x Battery cover  
x AC adapter (PS-0035)  
x Telephone cord  
D1384-2  
D1384-3  
D1384-4  
D1384-5  
D1384-6  
1 of each  
2 of each  
3 of each  
4 of each  
5 of each  
x If any items are missing or damaged, contact our Customer Care Line  
immediately. Never use damaged products!  
x Call waiting, CID, CIDCW, and Voice Mail are telephone line services. Contact your  
provider for details.  
If You...  
Contact Uniden’s...  
Customer Care Line*  
Parts Department*  
Accessibility Help Line  
Phone Number  
817-858-2929 or  
800-297-1023  
800-554-3988  
800-874-9314  
(voice or TTY)  
have a question or problem  
need a part or an accessory  
need special assistance due to  
a disability  
* During regular business hours, Central Standard Time; see our website for detailed  
business hours.  
© 2011 Uniden America Corp.  
Ft. Worth, Texas  
Printed in Vietnam  
U01UN331ZZZ(0)  
 
GETTING STARTED  
Installing Your Phone  
Charge the Baꢂery  
1. Unpack all handsets, battery packs, and battery  
covers. If you need to remove a cover, press in on the  
notch and slide the cover down and off.  
2. Line up the battery connector with the jack inside the  
handset; the connector only fits one way.  
3. Push the connector in until it clicks into place; tug gently on the wires to  
make sure the battery is securely connected.  
4. Replace the battery cover and slide it into place.  
5. Use an AC adapter to connect the power jack on the base to a regular indoor  
(120V AC) power outlet. Connect any chargers the same way.  
6. Place a handset in the base with the display facing forward. If the display  
doesn’t light up, reseat the handset or connect the base to a different outlet.  
For 2 or more handsets, place each handset in a charger.  
# Charge the handset completely (about 15 hours) before using.  
Connect the Telephone Cord  
1. Use the telephone cord to connect the TEL LINE jack on the base to a standard  
telephone wall jack.  
# If the display says Check Tel Line, check the connection between the  
base and the phone jack.  
2. If you are mounting the phone on the wall, place the mounting slots (on the  
rear of the base) over the pins on the wall plate; slide the base down to lock  
it into place.  
Test the Connecꢀon  
Make a quick test call. Pick up the handset and press TaLk/fLash. (Press ENd to  
hang up.)  
x If there’s a lot of noise, check for interference (see p. 13).  
x If you keep hearing a dial tone, change to pulse dialing (see below).  
Changing from Tone to Pulse Dialing  
Your phone uses tone dialing by default. If your phone company uses pulse  
dialing, you need to change your phone’s dial mode.  
1. Press MENu/sELEcT and select Global Setup.  
2. Select Dial Mode then Pulse. You’ll hear a confirmation tone.  
To send DTMF tones during a call (e.g., for an automated response system),  
press to temporarily switch to tone dialing. When you hang up, the phone  
*
automatically returns to pulse dialing.  
 
English - 3  
Geꢁng to Know Your Phone  
Earpiece  
Status  
Indicator  
Display  
UP  
FIND HANDSET  
MENU/SELECT  
SPEAKER  
CALLER ID/RIGHT  
Display  
PHONEBOOK/  
LEFT  
END  
TALK/  
FLASH  
DOWN  
Charging  
Contacts  
Twelve-  
key dial  
pad  
Base  
REDIAL/  
PAUSE  
MESSAGE/  
MUTE  
Microphone  
Key  
fINd  
What it does  
x In standby: page all handsets.  
INTERCOM/  
CLEAR  
Charging  
contacts  
Handset  
Key (icon)  
What it does  
x In standby: increase the ringer volume.  
x During a call: increase the volume.  
up (  
)
x In any menu or list: move the cursor up one line.  
x Switch a normal call to the speakerphone (and back).  
spEakER (  
)
x In standby or during a call: open the phonebook.  
x In the menu: go back to the previous screen.  
phoNEbook/  
LEfT (  
)
x In standby: start a telephone call (get a dial tone).  
x During a call: switch to a waiting call.  
TaLk/fLash  
x In standby: open the redial list.  
x While entering a phone number: insert a 2-second pause.  
REdIaL/pausE  
x In standby: start an intercom call.  
x During a call: put the call on hold and start a call transfer.  
x In standby: open the menu.  
x In any menu or list: select the highlighted item.  
INTERcoM/cLEaR  
MENu/sELEcT  
caLLER Id/RIGhT x In standby or during a call: open the CID list.  
x During a call: hang up.  
x In any menu or list: exit and go to standby.  
ENd  
 
4 - English  
Key (icon)  
What it does  
x In standby: decrease the ringer volume.  
x During a call: decrease the volume.  
dowN (  
)
x In any menu or list: move the cursor down one line.  
x In standby: access your answering system.  
x During a call: mute the microphone.  
x While the phone is ringing: ignore this call (mute the ringer).  
MEssaGE/MuTE  
(
)
LED  
What it means  
x On: the battery is charging.  
x Blinking: there are new messages.  
sTaTus  
INdIcaToR  
Reading the Display  
The icons appear based on what you're doing with the phone.  
Icon  
What it means  
Icon  
What it means  
The battery is 1) fully charged,  
2) half charged, 3) getting low,  
or 4) empty.  
You have a voice mail  
message.  
You have an answering system  
message.  
The speakerphone is on.  
Privacy Mode is on (see p. 10).  
The ringer is turned off.  
T-coil mode is on (see p. 6).  
[Aa] Enter 1) capital or 2) lower  
[aA] case letters.  
Entering Text on Your Phone  
x Use the 12-key dial pad anytime you want to enter text into your phone (e.g. a  
name in the phonebook).  
x If two letters in a row use the same key, enter the first letter; wait for the  
cursor to move to the next space and enter the second letter.  
To...  
Press...  
move the cursor left  
move the cursor right  
erase the character at the cursor  
erase the entire entry  
enter a blank space  
phoNEbook/LEfT.  
caLLER Id/RIGhT.  
INTERcoM/cLEaR.  
and hold INTERcoM/cLEaR.  
#
.
switch between upper and lower case letters  
.
*
 
English - 5  
To...  
Press...  
rotate through the punctuation and symbols  
0.  
Using the Menu  
To open the  
menu, press  
x If you don't press any keys  
for about thirty seconds, the  
handset exits the menu.  
x During a call, use phoNEbook/  
LEfT to back out of the menu  
without hanging up.  
Press MENU/SELECT  
to choose the  
MENU/SELECT.  
highlighted option  
.
The cursor  
shows the  
highlighted  
option.  
Handset Setup  
Handset Setup  
T-coil  
Answering Setup  
Use UP & DOWN  
to rotate  
through the  
options.  
press END  
to exit the  
To go back a  
screen, press  
PHONEBOOK/LEFT  
OR  
menu  
.
Handset Setup Menu  
Menu Option  
What it does  
Reduce noise on hearing aids equipped with a telecoil  
(T-coil) feature. It shortens talk time, so keep your battery  
fully charged.  
T-coil  
Choose the handset's ring tone. As you highlight each ring  
Ringer Tones  
AutoTalk  
tone, you hear a sample. To confirm, press MENu/sELEcT.  
Have this handset answer a call when you pick it up from  
the cradle (without pressing any buttons).  
Have this handset answer a call when you press any key on  
the 12-key dialpad.  
Change the name used on the handset’s display.  
Any Key Answer  
Banner  
Handset Language Change the display language.  
Key Touch Tone  
Have the keypad sound a tone when you press a key.  
Answering Setup Menu  
Refer to p. 10 for details on setting up your answering system.  
Date & Time Menu  
Use this menu to set the clock (if you have Caller ID, the phone sets date and time  
automatically). Enter the date and time; select AM or PM. Use caLLER Id/RIGhT to  
move the cursor past a digit without changing it. To confirm, press MENu/sELEcT.  
Global Setup Menu  
The settings on this menu affect all handsets.  
 
6 - English  
Menu Option  
Dial Mode  
Set Line Mode  
VMWI Reset  
What it does  
Choose tone or pulse dialing (see p. 3).  
Do not change it unless instructed to by customer service.  
Reset the Visual Message Waiting Indicator (see p. 10).  
USING YOUR PHONE  
Basics  
To...  
Using the earpiece  
Using the speakerphone  
press spEakER.  
make a call, dial the number, and press TaLk/fLash.  
answer a call  
press TaLk/fLash.  
press spEakER.  
hang up  
press ENd or put the handset in the cradle.  
ignore a call/mute the ringer  
press MEssaGE/MuTE while the phone is ringing.  
switch to the speaker and back press spEakER.  
mute the microphone during  
a call  
Press MEssaGE/MuTE.  
Press again to turn the microphone back on.  
put a call on hold  
press INTERcoM/cLEaR*.  
return to a call on hold  
press TaLk/fLash.  
press spEakER.  
* Aſter 5 minutes on hold, the call will be disconnected.  
Changing the Volume  
You can adjust the volume of the earpiece, speaker, and ringer separately.  
To change the...  
earpiece volume  
speaker volume  
When...  
Press...  
up to increase the  
volume.  
dowN to decrease  
it.  
you are listening to that earpiece or  
speaker (playing messages, etc.)  
ringer volume *  
the phone is in standby  
* To turn off the ringer, turn the ringer volume all the way down.  
Finding the Handset  
With the phone in standby, press fINd on the base. Each handset will beep for 1  
minute. To cancel, press fINd again or press any handset key.  
Using the Phonebook, Caller ID, and Redial Lists  
x The phone can store up to 30 entries in its phonebook.  
x If you subscribe to Caller ID (CID) service, the phone stores the information for  
the last 30 received calls to the CID list. Contact your telephone provider for  
more information.  
 
English - 7  
x Each handset remembers the last 5 numbers you dialed on it.  
x Only one handset can access one of the lists at a time.  
To...  
Press...  
phoNEbook/LEfT, caLLER Id/RIGhT, or  
REdIaL/pausE.  
open the list  
scroll through the list  
up or dowN.  
dial the current entry  
TaLk/fLash or spEakER.  
add 1 at the front of CID number  
before dialing for a toll call.  
*
store the current CID or redial entry MENu/sELEcT, then select Store Into Pb.  
to the phonebook  
Proceed to edit the name and number.  
edit the current phonebook entry  
MENu/sELEcT, then select Edit.  
MENu/sELEcT, then select Delete (or  
delete the current entry  
close the list  
Delete Entry). To confirm, select Yes.  
phoNEbook/LEfT.  
# When it’s in standby, the handset shows how many calls came in  
since the last time you checked the CID list.  
Adding Phonebook Entries  
With the phone in standby, open the phonebook. Press MENu/sELEcT and then  
select Create New. Proceed to enter a name and number.  
x Enter the phone number (up to 20 digits) exactly as you would dial it.  
x If you need to enter a pause between the numbers, press REdIaL/pausE; you’ll  
see a P in the display. (The dialing will pause for about 2 seconds per a digit.)  
x To edit the number, press INTERcoM/cLEaR to back up the cursor and delete  
numbers. Re-enter the correct numbers.  
Deleꢀng All the Entries  
With the phone in standby, open the list (phonebook, CID, or redial). Press MENu/  
sELEcT and then select Delete All. To confirm, select Yes.  
Chain Dialing  
If you often have to enter a series of digits or a code number during a call, you  
can save that code number as a regular phonebook entry and use the phonebook  
to send the code number.  
Make a call normally. When you hear the prompt that asks you to enter your  
number, open the phonebook and find the entry. Press MENu/sELEcT to send the  
code. If you change your mind, just close the phonebook.  
 
8 - English  
Using Call Waiꢀng  
x Call Waiting, a service available from your telephone provider, lets you receive  
calls while you are on another call. Caller ID on Call Waiting (CIDCW) service  
displays CID information for a waiting call.  
x If you get a Call Waiting call, the phone sounds a tone. Press TaLk/fLash to  
switch between the current call and the waiting call; each time you switch,  
there is a short pause before you’re connected to the other caller.  
Mulꢀ-Handset Features  
# To use the features in this section, you need at least 2 handsets.  
Handset to Handset Intercom  
x You can make an intercom call from any handset, but only two handsets can be  
in an intercom call at any time.  
x If an outside call comes in during an intercom page, the phone cancels the page  
so you can answer the incoming call.  
x If an outside call comes in during an intercom call, press TaLk/fLash to hang up  
the intercom call and answer the outside call.  
To page another handset  
To answer the page  
1. With the phone in standby, press INTERcoM/cLEaR.  
Press TaLk/fLash or  
INTERcoM/cLEaR.  
2. Select the handset you want to page, or select All.  
(To cancel, press ENd.)  
To end an intercom call, press ENd. Both handsets return to standby.  
Call Transfer  
To page another handset  
To answer the page  
1. During a call, press INTERcoM/cLEaR. The phone  
1. Press INTERcoM/  
cLEaR . Speak to  
puts the call on hold.  
the other handset.  
2. Select the handset you want to page, or select All.  
(To cancel and return to the call, press TaLk/fLash.)  
2. Press TaLk/fLash  
to speak to the  
caller.  
3. When the other handset accepts the call, you’ll be  
disconnected (press TaLk/fLash to rejoin the call).  
Conference Calling  
x When an outside call comes in, two handsets can join in a conference call with  
the outside caller.  
x To join a call that’s already in progress, just press TaLk/fLash or spEakER.  
x To leave the conference call, hang up normally; the other handset remains  
connected to the call.  
 
English - 9  
Privacy Mode  
To activate privacy mode on a call in progress, press MENu/sELEcT twice. As long  
as privacy mode is on, you’ll see a in the display, and no other handsets can  
join your call. Privacy mode turns off automatically when you hang up; you can  
also turn it off by pressing MENu/sELEcT twice.  
Using a Voice Mail Service  
x If you subscribe to a voice mail service, your phone can notify you when  
you have a new message waiting. This feature supports Frequency-Shift  
Keying (FSK) message notification. Contact your voice mail provider for more  
information.  
x When you have new messages, the sTaTus LED on the handset blinks, and the  
display shows a message icon.  
x After you listen to your messages, the voice message icon turns off. If it  
doesn’t, you can reset it. With the phone in standby, open the menu and select  
Global Setup; select VMWI Reset, then select Yes.  
USING THE ANSWERING SYSTEM  
Answering System Opꢀons (Answering Setup  
)
You can set or change the answering system options from any handset. Just open  
the menu and select Answering Setup. Select one of the following:  
Menu Option  
What it does  
Enter a 2-digit PIN so you can access your answering system  
from any touch-tone phone (see p. 12).  
Security Code  
Set the number of rings (2, 4, or 6) before the system  
answers (see p. 12 about Toll Saver).  
Ring Time  
Set the amount of time (1 or 4 minutes) callers can leave  
a message. Choose Announce Only if you don't want the  
system to let callers to leave a message.  
Record Time  
Ans. Language  
Ans. On/Off  
Change the language of the system's voice prompts.  
Turn your answering system on or off.  
Record Greeting Record an outgoing message or greeting (see below).  
Greeting Options Switch greetings or delete your greeting (see below).  
Personalizing the Greeꢀng  
Your personal outgoing message or greeting can be from 2 to 30 seconds long. If  
you don’t record a greeting, the system uses a pre-recorded greeting: Hello, no  
one is available to take your call. Please leave a message after the tone.  
 
10 - English  
With the phone in standby, open the menu. Select Answering Setup and select  
an action from the following table:  
To...  
Follow these steps:  
1. Select Record Greeting. and press MENu/sELEcT.  
2. Wait until the system says "Record greeting", then you  
can start recording. Press MENu/sELEcT to stop recording.  
3. The system plays back your new greeting. To keep  
the greeting, press ENd. To re-record it, wait until the  
playback ends and then press MENu/sELEcT.  
Record a  
personal  
greeting  
Switch between Select Greeting Options. The system plays back the current  
greetings  
greeting. Press MENu/sELEcT to switch greetings.  
Delete your  
greeting  
Switch to your personal greeting, then press INTERcoM/cLEaR.  
Accessing the Answering System  
When the phone is in standby, you can access the system from any handset:  
x Only 1 handset can access the  
Press MESSAGE/MUTE to start  
system at a time.  
remote operation mode.  
x During remote access:  
- The handset display shows the  
number of messages.  
- The system beeps so you know it's  
waiting for your next command.  
Use CALLER ID/  
Use PHONEBOOK/  
LEFT to go to the  
previous option:  
RIGHT to go to  
the next option:  
5:Stop  
[
/
/select]  
4:Delete  
3:Skip  
1:Repeat  
2:Play  
2:Play  
3:Skip  
- You can press the number key  
shown next to each command  
instead of scrolling through the  
screens.  
1:Repeat  
4:Delete  
Press MENU/  
Press END to  
exit remote  
operation mode.  
SELECT to choose  
the displayed option.  
- If you do nothing for 30 seconds, the phone returns to standby.  
Geꢁng Your Message  
When you have new messages (that you have not listened to yet), only the  
new messages will be played. To play old messages, complete to play all new  
messages first, then start message playback again.  
To...  
Follow these steps:  
play new messages Press MEssaGE/MuTE.  
Wait at least 5 seconds after starting this message,  
select 1:Repeat.  
restart this message  
replay an earlier  
message  
Within 2 seconds after starting a message,  
select 1:Repeat.  
 
English - 11  
To...  
Follow these steps:  
skip a message  
Select 3:Skip.  
delete this message Select 4:Delete.  
play old messages  
stop playback  
After the system plays all new messages, select 2:Play.  
Select 5:Stop.  
Screening Your Calls  
While the system takes a message, you can listen from a handset. Only one  
handset can screen calls at a time. If another handset tries to screen calls, it  
beeps and returns to standby.  
To...  
Press...  
hear the caller leaving a message  
answer the call  
MEssaGE/MuTE.  
TaLk/fLash.  
mute the call screen without  
answering*  
ENd or return the handset to the cradle.  
* If you mute the call screen, the system conꢁnues taking the message: it just stops  
playing through the speaker.  
Using the System While You’re Away from Home  
You can dial in to your answering system from any touch-tone phone. Before you  
can use this feature, you must program a security code.  
Programming a Security Code  
With the phone in standby, open the menu; select Answering Setup, then select  
Security Code. Use the number keypad to enter a two-digit security code (01 to  
99). Press MENu/sELEcT when you’re finished.  
# Remember to make a note of your new security code!  
Dialing In to Your System  
1. Call your phone number from any touch-tone phone, and wait until the  
system answers.  
x If you have the Ring Time set to Toll Saver, the system answers after 2 rings  
if you have new messages and 4 rings if you don’t. You can hang up during  
the third ring.  
x If the system is turned off, it answers after 10 rings and beeps sound.  
2. During the greeting or beeps, press  
0
and immediately enter your security  
code. If you enter it incorrectly 3 times, the system hangs up and returns to  
standby.  
 
12 - English  
3. The system announces the time, the number of messages in memory, and a  
help prompt. It beeps to let you know it’s waiting for a command; enter a  
2-digit command  
01 Repeat message  
02 Play message  
03 Skip message  
04 Delete message  
05 Stop playback  
from the chart.  
# If you don’t press  
any keys for 15  
seconds, the  
06 Turn the system on  
09 Turn the system off  
10 Hear help prompts  
system hangs  
up and return to  
standby.  
IMPORTANT INFORMATION  
Troubleshooꢀng  
General problems  
Possible solutions  
x Check the telephone cord connection.  
I can’t make or receive x Disconnect the base AC adapter. Wait a few  
calls.  
minutes, then reconnect it.  
x Make sure the base is plugged in.  
The handset won’t ring. x Make sure the ringer is turned on.  
x Charge the battery for 15-20 hours.  
x Check the battery connection.  
The handset is not  
working.  
x Let calls ring twice before answering.  
x Make sure your CID service is active.  
The handset won’t  
display CID information.  
Audio issues  
Possible solutions  
x The battery is getting low. Check the handset for a low  
battery alert. Finish your conversation and return the  
handset to the cradle as soon as possible.  
I hear a beeping  
during a call.  
x Check for interference from appliances (microwave  
ovens, TVs, etc.) or wireless devices (baby monitors, WiFi  
equipment, etc.). Move the handset or base away from the  
interference source.  
There’s a lot of  
noise or static  
on the line  
x Move the handset closer to the base.  
x If you use a telecoil hearing aid, turn the T-coil on (see p. 6).  
Multi-handset problems  
Possible solutions  
x You may have to reset the handset.  
Contact Customer Service for instructions.  
I can’t transfer calls.  
Two handsets can’t talk to a caller. x See if any handset is in Privacy Mode.  
 
English - 13  
Multi-handset problems  
A handset says Unavailable.  
Answering system problems  
Possible solutions  
x Move the handset closer to the base.  
x See if any handset is in Privacy Mode.  
Possible solutions  
x Make sure the answering system is on.  
x Make sure the base is plugged in.  
The answering system does not  
work.  
x See if Record Time is set to Announce Only.  
x Delete messages (memory may be full).  
The system won't record  
messages.  
x See if another handset is using the system.  
x Make sure the phone is in standby.  
A handset can't access the  
answering system.  
x If there was a power failure, re-record your  
personal outgoing message.  
My outgoing message is gone.  
x Increase the Record Time.  
Messages are incomplete.  
The system keeps recording  
x Delete messages (memory may be full).  
x You may have to change the line mode.  
when I answer on an extension. Contact Customer Service for instructions.  
Installing a Line Filter or DSL Filter  
x A telephone line filter or DSL filter prevents services that use the phone line  
from causing interference on your phone. To get a line filter, contact your  
service provider or look in an electronics store.  
x Plug the filter into the telephone wall jack and plug the base into the filter.  
Make a test call to make sure the noise is gone.  
Liquid Damage  
CAUTION: If the base is covered in liquid, disconnect the adapter and  
phone cord from the wall before touching it.  
If the liquid is only on the exterior housing of the base or handset, wipe it off and  
use as normal. If you can hear liquid inside the housing:  
1. Remove all compartment covers, and disconnect all cables and cords.  
2. If liquid is leaking from any vent or hole, turn the phone so that vent faces  
down. If not, place the largest vent face down.  
3. Let dry for at least 3 days. Check for liquid inside the phone before replacing  
compartment covers and reconnecting cords.  
 
14 - English  
x
As part of our commitment to protecꢁng our  
environment and  
Adapter and Baꢂery Informaꢀon  
AC adapter Base Charger  
Part number PS-0035 PS-0035  
Input voltage 120V AC, 60 Hz  
conserving natural  
resources, Uniden  
voluntarily parꢁcipates in  
an RBRC® industry program  
to collect and recycle used  
Output  
voltage  
8V AC @ 8V AC @  
300mA 300mA  
Ni-MH baꢂeries within the  
United States. Please call  
1-800-8-BATTERY for informaꢁon on Ni-MH  
baꢂery recycling in your area. (RBRC® is a  
registered trademark of the Rechargeable  
Baꢂery Recycling Corporaꢁon.)  
Battery pack (normal use)  
Part  
number/  
Capacity  
BT-1021 (300mAh)  
2.4V DC  
Rechargeable batteries must be recycled  
or disposed of properly.  
Talk time  
about 7 hours  
Warning! The cords on this product and/  
or accessories contain lead, a chemical  
known to the state of California to cause  
birth defects or other reproductive harm.  
Wash hands after handling.  
Uniden works to reduce lead content in  
PVC coated cords in our products and  
accessories.  
Standby time about 6 days  
Battery life about 1 year  
x Use only the supplied AC adapters.  
x Use the proper adapter for the base  
and any chargers.  
x Do not place the unit in direct  
sunlight or subject it to high  
temperatures.  
x Replace the battery when the talk  
or standby time becomes noticeably  
reduced. For replacements, call the  
Parts Department (see the front  
cover).  
x When the battery gets low, the  
handset beeps or shows a low  
battery alert; put the handset in the  
cradle for recharging.  
Compliance Informaꢀon  
FCC Part 68 Informaꢀon  
This equipment complies with Part 68  
of the FCC rules and the requirements  
adopted by the ACTA. On the boꢂom of this  
equipment is a label that contains, among  
other informaꢁon, a product idenꢁfier in the  
format US: AAAEQ##TXXXX. If requested,  
this number must be provided to the phone  
company.  
An applicable Universal Service Order Codes  
(USOC) cerꢁficaꢁon for the jacks used in  
this equipment is provided (i.e., RJ11C) in  
the packaging with each piece of approved  
terminal equipment. A plug and jack used  
to connect this equipment to the premises  
wiring and telephone network must comply  
with the applicable FCC Part 68 rules and  
requirements adopted by the ACTA. A  
compliant telephone cord and modular plug  
is provided with this product. It is designed  
to be connected to a compaꢁble modular  
jack that is also compliant. See installaꢁon  
instrucꢁons for details.  
Rechargeable Baꢂery Warning  
x
This equipment contains a rechargeable  
Nickel-Metal-Hydride (Ni-MH) baꢂery.  
Nickel is a chemical known to the state of  
California to cause cancer.  
x
x
x
Do not short-circuit the baꢂery.  
The baꢂeries in this equipment may explode if  
disposed of in a fire.  
Do not charge the baꢂeries in any charger  
other than the one specified in the owner’s  
manual. Using another charger may damage  
the baꢂery or cause it to explode.  
x
The REN is used to determine the number of  
devices that may be connected to a phone  
 
English - 15  
line. Excessive RENs on a phone line may  
result in devices not ringing in response to  
an incoming call. In most but not all areas,  
Any changes or modificaꢁons to this product  
not expressly approved by the manufacturer  
or other party responsible for compliance  
the sum of RENs should not exceed five (5.0). could void your authority to operate this  
To be certain of the number of devices that  
may be connected to a line, as determined  
by the total RENs, contact the telephone  
provider. The REN for this product is part of  
the product idenꢁfier that has the format  
US:AAAEQ##TXXXX. The digits represented by  
## are the REN without a decimal point (e.g.,  
03 is a REN of 0.3).  
product.  
NOTICE: According to telephone company  
reports, AC electrical surges, typically  
resulꢁng from lightning strikes, are very  
destrucꢁve to telephone equipment  
connected to AC power sources. To minimize  
damage from these types of surges, a surge  
arrestor is recommended.  
If this equipment causes harm to the  
telephone network, the telephone company  
will noꢁfy you in advance that temporary  
disconꢁnuance of service may be required.  
But if advance noꢁce isn't pracꢁcal, the  
telephone company will noꢁfy the customer  
as soon as possible. Also, you will be advised  
of your right to file a complaint with the FCC  
if you believe it is necessary. The telephone  
company may make changes in its faciliꢁes,  
equipment, operaꢁons or procedures that  
could affect the operaꢁon of the equipment.  
If this happens the telephone company will  
provide advance noꢁce in order for you to  
make necessary modificaꢁons to maintain  
uninterrupted service.  
Please follow instrucꢁons for repairing, if any  
(e.g. baꢂery replacement secꢁon); otherwise  
do not subsꢁtute or repair any parts of the  
device except as specified in this manual.  
Connecꢁon to party line service is subject to  
state tariffs. Contact the state public uꢁlity  
commission, public service commission or  
corporaꢁon commission for informaꢁon. This  
equipment is hearing aid compaꢁble.  
If you experience trouble with this  
FCC Part 15 Informaꢀon  
This device complies with part 15 of the FCC  
rules. Operaꢁon is subject to the following  
two condiꢁons: (1) This device may not cause  
harmful interference, and (2) This device must  
accept any interference received, including  
interference that may cause undesired  
operaꢁon. Privacy of communicaꢁons may  
not be ensured when using this phone.  
FCC PART 15.105(b): Note: This equipment  
has been tested and found to comply with  
the limits for a Class B digital device, pursuant  
to part 15 of the FCC Rules. These limits are  
designed to provide reasonable protecꢁon  
against harmful interference in a residenꢁal  
installaꢁon. This equipment generates, uses  
and can radiate radio frequency energy and, if  
not installed and used in accordance with the  
instrucꢁons, may cause harmful interference  
to radio communicaꢁons. However, there  
is no guarantee that interference will not  
occur in a parꢁcular installaꢁon. If this  
equipment does cause harmful interference  
to radio or television recepꢁon, which can be  
determined by turning the equipment off and  
on, the user is encouraged to try to correct  
the interference by one or more of the  
following measures:  
equipment, contact the manufacturer or  
an authorized agent. If the equipment is  
causing harm to the telephone network, the  
telephone company may request that you  
disconnect the equipment unꢁl the problem  
is resolved.  
x
x
Reorient or relocate the receiving antenna.  
Increase the separaꢁon between the  
equipment and receiver.  
If your home has wired alarm equipment  
connected to a phone line, be sure that  
installing the system does not disable your  
alarm equipment. If you have quesꢁons about  
what will disable alarm equipment, contact  
your telephone company or a qualified  
installer.  
x
x
Connect the equipment into an outlet on  
a circuit different from that to which the  
receiver is connected.  
Consult the dealer or an experienced radio/TV  
technician for help.  
 
16 - English  
is subject to the following two condiꢁons: (1)  
this device may not cause interference, and  
(2) this device must accept any interference,  
including interference that may cause  
undesired operaꢁon of the device. "Privacy of  
communicaꢁons may not be ensured when  
using this telephone."  
RF Exposure Informaꢀon  
This product complies with FCC radiaꢁon  
exposure limits under the following  
condiꢁons:  
x
x
x
The base must be placed to allow a minimum  
of 20 cm (8 inches) between the antenna and  
all persons during normal operaꢁon.  
The base must not be collocated or operated  
in conjuncꢁon with any other antenna or  
transmiꢂer.  
The handset is designed for body-worn  
operaꢁon and meets FCC RF exposure  
guidelines when used with any belt clip,  
carrying case, or other accessory supplied  
with this product. (All necessary accessories  
are included in the package; any addiꢁonal  
or opꢁonal accessories are not required  
for compliance with the guidelines.) Third  
party accessories (unless approved by the  
manufacturer) should be avoided as these  
might not comply with FCC RF exposure  
guidelines.  
Warranty (1 Year, Limited)  
Evidence of original purchase is required  
for warranty service.  
WARRANTOR: UNIDEN AMERICA  
CORPORATION ("Uniden")  
ELEMENTS OF WARRANTY: Uniden warrants,  
for one year, to the original retail owner, this  
Uniden Product to be free from defects in  
materials and craſtsmanship with only the  
limitaꢁons or exclusions set out below.  
WARRANTY DURATION: This warranty to the  
original user shall terminate and be of no  
further effect 12 months aſter the date of  
original retail sale. The warranty is invalid if  
the Product is (A) damaged or not maintained  
as reasonable or necessary, (B) modified,  
altered, or used as part of any conversion  
kits, subassemblies, or any configuraꢁons  
not sold by Uniden, (C) improperly installed,  
(D) serviced or repaired by someone other  
than an authorized Uniden service center  
for a defect or malfuncꢁon covered by this  
warranty, (E) used in any conjuncꢁon with  
equipment or parts or as part of any system  
not manufactured by Uniden, or (F) installed  
or programmed by anyone other than as  
detailed by the owner's manual for this  
product.  
STATEMENT OF REMEDY: In the event  
that the product does not conform to this  
warranty at any ꢁme while this warranty is  
in effect, warrantor will either, at its opꢁon,  
repair or replace the defecꢁve unit and  
return it to you without charge for parts,  
service, or any other cost (except shipping  
and handling) incurred by warrantor or  
its representaꢁves in connecꢁon with the  
performance of this warranty. Warrantor, at  
its opꢁon, may replace the unit with a new  
or refurbished unit. THE LIMITED WARRANTY  
SET FORTH ABOVE IS THE SOLE AND ENTIRE  
WARRANTY PERTAINING TO THE PRODUCT  
AND IS IN LIEU OF AND EXCLUDES ALL OTHER  
Industry Canada (I.C.) Noꢀce  
Terminal equipment  
NOTICE: This equipment meets the applicable  
Industry Canada Terminal Equipment  
Technical Specificaꢁons. This is confirmed by  
the registraꢁon number. The abbreviaꢁon  
IC before the registraꢁon number signifies  
that registraꢁon was performed based on  
a Declaraꢁon of Conformity indicaꢁng that  
Industry Canada technical specificaꢁons were  
met. It does not imply that Industry Canada  
approved the equipment.  
NOTICE: The Ringer Equivalence Number  
(REN) for this terminal equipment is marked  
on the equipment itself. The REN assigned  
to each terminal equipment provides an  
indicaꢁon of the maximum number of  
terminals allowed to be connected to a  
telephone interface. The terminaꢁon on an  
interface may consist of any combinaꢁon of  
devices subject only to the requirement that  
the sum of the Ringer Equivalence Numbers  
of all the devices does not exceed 5.  
Radio equipment  
The term IC before the radio cerꢁficaꢁon  
number only signifies that Industry Canada  
technical specificaꢁons were met. Operaꢁon  
 
English - 17  
As an Energy Star® Partner, Uniden has  
determined that this product meets the  
Energy Star® guidelines for energy efficiency.  
Energy Star® is a U.S.  
WARRANTIES OF ANY NATURE WHATSOEVER,  
WHETHER EXPRESS, IMPLIED OR ARISING  
BY OPERATION OF LAW, INCLUDING, BUT  
NOT LIMITED TO ANY IMPLIED WARRANTIES  
OF MERCHANTABILITY OR FITNESS FOR A  
PARTICULAR PURPOSE. THIS WARRANTY  
DOES NOT COVER OR PROVIDE FOR  
THE REIMBURSEMENT OR PAYMENT OF  
INCIDENTAL OR CONSEQUENTIAL DAMAGES.  
Some states do not allow this exclusion or  
limitaꢁon of incidental or consequenꢁal  
damages so the above limitaꢁon or exclusion  
may not apply to you.  
registered mark.  
x
x
Uniden® is a registered  
trademark of Uniden  
America Corporaꢁon.  
The pictures in this  
manual are for example only. Your phone may  
not look exactly like the pictures.  
LEGAL REMEDIES: This warranty gives you  
specific legal rights, and you may also have  
other rights which vary from state to state.  
This warranty is void outside the United  
States of America and Canada.  
PROCEDURE FOR OBTAINING PERFORMANCE  
OF WARRANTY: If, aſter following the  
instrucꢁons in the owner's manual you  
are certain that the Product is defecꢁve,  
pack the Product carefully (preferably in its  
original packaging). Disconnect the baꢂery  
from the Product and separately secure the  
baꢂery in its own separate packaging within  
the shipping carton. The Product should  
include all parts and accessories originally  
packaged with the Product. Include evidence  
of original purchase and a note describing the  
defect that has caused you to return it. The  
Product should be shipped freight prepaid, by  
traceable means, to warrantor at:  
Uniden America Service  
4700 Amon Carter Blvd.  
Fort Worth, TX 76155  
 
18 - English  

Tascam Computer Monitor US 122 User Manual
Toastmaster Food Warmer E17UAC User Manual
Toshiba Blu ray Player BDX3000KU User Manual
Toshiba Computer Hardware TC9457F User Manual
Tripp Lite Network Cables P804 010 R User Manual
Tunturi Treadmill J661F User Manual
Uniden Two Way Radio 3689 2CK User Manual
Vicks Humidifier V3100 User Manual
ViewSonic Mouse MU209 User Manual
VTech Baby Toy 91 002594 000 User Manual