Owner’s Manual
HDMI over Dual Cat5
Extender Kit
Models: B125-101-60, B125-101-60-WP
Product Features
2
Optional Accessories
2
2
4
Installation and Operation
Warranty & Warranty Registration
Package Contents
• Local Transmitter and Remote Receiver Units
• External Power Supply (Input: 100-240V, 50/60Hz, 0.5A Output: 5V, 2A)
• Screwdriver for Equalization adjustment
• (x4) Wallplate screws (B125-101-60-WP only)
• Owner’s Manual
1111 W. 35th Street, Chicago, IL 60609 USA
Note: Follow these instructions and operating procedures to ensure correct performance and to
prevent damage to this unit or to its connected devices. Copyright © 2011 Tripp Lite.
All rights reserved. All trademarks are the sole property of their respective owners.
201109193-93-3144.indd
1
10/7/2011 2:29:39 PM
Installation and Operation
TMDS
UP TO 125 ft. (Cat6)
UP TO 75 ft. (Cat5)
DDC
BLU-RAY
1080p (6o Hz)
1080p (6o Hz)
LOCAL
TRANSMITTER
REMOTE
RECEIVER
B125-101-60-WP Installation Diagram
1
Connect the HDMI source to the HDMI input on the local transmitter
unit.
2 Connect the TMDS RJ45 port on the local transmitter to the TMDS
RJ45 port on the remote receiver using Cat5e/6 cable.
Note: See the installation diagrams for maximum extension
distance at 1080p (60Hz) video resolutions.
3 Connect the DDC RJ45 port on the local transmitter to the DDC
RJ45 port on the remote receiver using Cat5e/6 cable.
Note: See the installation diagrams for maximum extension
distance at 1080p (60Hz) video resolutions.
4
5
Connect the HDMI output on the remote receiver to the HDMI monitor.
Connect the external power supply to the remote receiver, and then
plug it into a Tripp Lite Surge Suppressor, Uninterruptible Power
Supply (UPS), or Power Distribution Unit (PDU). The Green LEDs on
both the local and remote units will illuminate to indicate that power
is being received. The Orange LED on the remote unit will illuminate
to indicate that a connection has been made with the local unit via
Cat5e/6 cable.
6
7
Turn on the power to the HDMI source. The Orange LED on the local
unit will illuminate to indicate it is receiving a signal from the source.
If necessary, use the equalization control to adjust the video image.
Note: An improper Equalization setting can result in no image being
displayed at all. Try each Equalization setting until an acceptable
picture is displayed.
3
201109193-93-3144.indd
3
10/7/2011 2:29:40 PM
Warranty and Warranty Registration
1-Year Limited Warranty
TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of one (1) year
from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited to repairing or replacing (at
its sole option) any such defective products. To obtain service under this warranty, you must obtain a Returned
Material Authorization (RMA) number from TRIPP LITE or an authorized TRIPP LITE service center. Products must
be returned to TRIPP LITE or an authorized TRIPP LITE service center with transportation charges prepaid and must
be accompanied by a brief description of the problem encountered and proof of date and place of purchase. This
warranty does not apply to equipment, which has been damaged by accident, negligence or misapplication or has
been altered or modified in any way.
EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or
exclusion(s) may not apply to the purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGE. Specifically, TRIPP LITE is not liable for any costs, such as lost profits or
revenue, loss of equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims by
third parties, or otherwise.
Use of this equipment in life support applications where failure of this equipment can reasonably be expected
to cause the failure of the life support equipment or to significantly affect its safety or effectiveness is not
recommended. Do not use this equipment in the presence of a flammable anesthetic mixture with air, oxygen or
nitrous oxide.
WEEE Compliance Information for Tripp Lite Customers and
Recyclers (European Union)
Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, when
customers buy new electrical and electronic equipment from Tripp Lite they are entitled to:
• Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country)
• Send the new equipment back for recycling when this ultimately becomes waste
WARRANTY REGISTRATION
Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You’ll be automatically
entered into a drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
Tripp Lite follows a policy of continuous improvement. Product specifications are subject to change without notice.
1111 W. 35th Street, Chicago, IL 60609 USA
201109193 • 93-3144
201109193-93-3144.indd
4
10/7/2011 2:29:40 PM
|