Tripp Lite Power Supply APSX1250F User Manual

Tripp Lite  
1111 West 35th Street  
Chicago, IL 60609 USA  
Telephone: +(773) 869 1234  
Model #: APSX1250F  
PowerVerter APS X Series Inverter/Charger - with Faster Auto-Transfer Switching  
Highlights  
12V DC or 230V AC input; 230V, 50 Hz output; 2 AC outlets  
1250W continuous, 1875W OverPower and 2500W DoubleBoost inverter  
output (see specifications)  
3-stage selectable 7.5 / 30 amp wet/dry cell battery charger  
Faster Auto Transfer Switching option for battery backup/UPS operation  
Reliability-enhanced large-transformer design with protected DC terminals  
Description  
Tripp Lite's APSX1250F DC-to-AC inverter with faster automatic line-to-battery transfer and integrated charging system serves as an extended-run  
UPS, a stand-alone power source or an automotive inverter. Supplies up to 1250W of continuous 230V AC power to 2 AC outlets from any 12V  
battery or automotive DC source. OverPower™ inverter output feature temporarily provides up to 150% of the continuous output for up to 1-60  
minutes and DoubleBoost™ inverter output feature delivers up to 200% of the continuous output for up to 10 seconds, providing the extra power  
needed to cold start heavy-duty tools and motorized equipment. When AC cable is connected to a live wall socket, commercial power passes  
through to connected equipment and the battery set is recharged via a 3-stage selectable 7.5/30A charging system. In UPS mode, the APS system  
responds to blackouts and voltage fluctuations with near-instantaneous automatic transfer to battery-derived AC output. Includes a set of  
high-current DC input terminals for simple installation (user supplies batteries and cabling—see owner's manual for recommendations). Passes sine  
wave utility or generator power during battery charging and UPS line power operation, and efficient PWM sine wave AC output in inverter and UPS  
backup modes. Reliable large transformer design with frequency control powers resistive electronic loads or large inductive motors, compressors and  
other items with high current needs on startup. Optional APSRM4 wired remote power switch with full status LEDs provides remote power inverter  
on/off switching and continuous status information (APSRM4 sold separately). Provides unlimited runtime with connection of any number of  
user-supplied batteries. Highly adaptable to a variety of applications and site conditions with adjustable charger settings for wet/gel battery types and  
selectable line-to-battery power transfer voltages.  
Applications  
Versatile inverter/charger system with auto-transfer switching serves as an automotive inverter for RVs, over-the-road trucking, conversion  
vans and fleet service vehicles; a standalone alternative power source for off-grid alternative energy or export applications, and as an  
uninterruptible power supply (UPS) for items compatible with a 10-millisecond transfer time.  
Package Includes  
APSX1250F Inverter/Charger  
Instruction manual with warranty information  
(1) Universal Receptacle Adapter compatible with multiple international plugsets  
Features  
APSX1250F serves as an automotive or stationary DC-to-AC inverter with a faster automatic line-to-battery transfer and integrated battery  
charger  
 
Recommended  
Electrical Service  
DC INPUT: Requires 12VDC input source capable of delivering 125A for the required duration (when used at full  
continuous capacity - DC requirements increase during Over-Power and Double-Boost operation). For automotive  
applications, professional hardwire  
Maximum input  
amps / watts  
DC INPUT: Full continuous load125A at 12VDC. AC INPUT: 9.3A at 230VAC with full inverter and charger load (3.3A  
max charger-only / combined input load to support charger and AC output is automatically controllable to 66%-33%-0%  
based on AC output loading  
BATTERY  
Expandable battery  
runtime  
Runtime is expandable with any number of user-supplied wet or gel type batteries  
12V  
DC system voltage  
Battery recharge rate Selectable 7.5 / 30 amp  
LEDS ALARMS & SWITCHES  
Front panel LEDs  
Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7  
levels reported). See manual for sequences  
Switches  
3-position on/off/remote switch enables simple on/off power control plus "auto/remote" setting that enables distant on/off  
control of the inverter system when used in conjunction with optional APSRM4 accessory when used in inverter mode.  
In AC uninterrupt  
SURGE / NOISE SUPPRESSION  
AC surge  
840-joules AC surge suppression rating  
suppression  
PHYSICAL  
Shipping weight (lbs) 26  
Shipping weight (kg)  
11.8  
Shipping  
Dimensions (HWD/in)  
12.5 x 11 x 10.75  
31.8 x 27.9 x 27.3  
Shipping  
Dimensions  
(HWD/cm)  
Unit weight (lbs)  
Unit weight (kg)  
24  
10.9  
Unit Dimensions  
(HWD/in)  
7 x 8.75 x 9  
Unit Dimensions  
(HWD/cm)  
17.8 x 22.2 x 22.8  
Polycarbonate  
Material of  
construction  
Form factors  
supported  
Mounting slots enable permanent placement of APSX1250 on any horizontal surface (see manual for additional  
mounting information)  
Cooling method  
Multi-speed fan  
Style  
Heavy-duty with built-in battery charger  
ENVIRONMENTAL  
Relative Humidity  
0-95% non-condensing  
LINE / BATTERY TRANSFER  
Transfer time from  
line power to battery  
mode  
10 milliseconds (typicalcompatible with many computers, servers and networking equipment - verify transfer time  
compatibility of loads for UPS applications)  
Low voltage transfer  
to battery power  
In AC "auto" mode, inverter/charger switches to battery mode as line voltage drops to 144V (user adjustable to 163,  
182, 201Vsee manual)  
High voltage transfer In AC "auto" mode, inverter/charger switches to battery mode as line voltage increases to 272  
to battery power  
SPECIAL FEATURES  
Appearance  
All-black color scheme  
 
Remote control  
capability  
Yes  
BATTERY PACK ACCESSORY (optional)  
Battery Pack  
98-121 sealed lead acid battery (optional)  
Accessory (optional)  
CERTIFICATIONS  
Certifications  
WARRANTY  
RoHS compliant  
Product Warranty  
Period  
Outside the U.S. and Canada, call for warranty information  
Related Items  
External Battery Housings  
BP-260  
Ideal battery housing for use with Tripp Lite PowerVerter APS inverter/charger systems with a Qty: [optional]  
12 or 24V DC system voltage.  
Inverter Accessories  
APSRM4  
Remote Control Module - for Tripp Lite Inverters and Inverter/Chargers  
Qty: [optional]  
Qty: [optional]  
Replacement Batteries  
98-121  
12V DC Sealed, Maintenance-Free Battery - For all PowerVerter models which accept 12V  
DC input  
More information, including related products, owner's manuals, and additional technical specifications, can be found online at  
©2009 Tripp Lite. All Rights Reserved.  
 

Technics Car Amplifier SU 810 User Manual
Texas Instruments Automobile Battery Charger SLUU477 User Manual
TRENDnet Network Hardware TEW 638APB User Manual
Tripp Lite Power Supply 500 PNP User Manual
Troy Bilt Lawn Mower 3114GR User Manual
Varimixer Kitchen Utensil 317 User Manual
VDO Dayton CD Player TR 5106 X User Manual
Vector Vacuum Cleaner VEC248 User Manual
ViewSonic Network Router VMP71 User Manual
VTech Cordless Telephone VT 9112 User Manual