Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: [email protected]
Model Number: SUINT1500RTXL2UA
SmartOnline 1.5kVA On-Line Double-Conversion UPS, 2U Rack/Tower, 200/220/230/240V C13 outlets
Highlights
1500VA / 1.5kVA / 1200 watt on-line double-conversion 2U rack/tower UPS
200/208/220/230/240V 50/60Hz output; High efficiency economy mode option
Expandable runtime; Hot-swap batteries; 19 in / 48.3cm installed depth
USB, RS232 & EPO ports; support for SNMP/WEB card options
Front panel status LEDs with detailed load and battery metering
2 independently switchable output load banks
C14 inlet, C13 outlets, 2 C13 to C14 power cables included
Description
Tripp Lite's SmartOnline SUINT1500RTXL2Ua online, double conversion UPS protects critical server, networking and telecommunications
equipment from blackouts, voltage fluctuations and transient surges. Large capacity 1.5kVA/1200 watt UPS continuously converts incoming AC to
DC, then back to perfect sine wave AC output at selectable 200/208/220/230/240V AC (+/-2%). Removes harmonic distortion, fast electrical
impulses, frequency fluctuations and other hard-to-solve power problems not addressed by other UPS types. Pure sine wave output and zero
transfer time to battery offers guaranteed compatibility with all equipment types. Highly efficient operation in optional Economy Mode setting, saving
BTU heat output and energy costs. Includes 6 IEC-320-C13 outlets arranged in two individually switchable load banks of three outlets each. Load
banks can be controlled independently via software interface to selectively reboot remote equipment or shed less important loads to extend battery
runtime for critical equipment. Battery backup runtime can be extended through the addition of external battery packs BP48V24-2U (limit 1),
BP48V60RT-3U (multi-pack compatible) and BP48V27-2US (multi-pack compatible). Network management interfaces support simultaneous
communications via USB port, DB9 serial port and SNMPWEBCARD slot. HID-compliant USB interface enables integration with built-in power
management and auto shutdown features of Windows and Mac OS X. Supports simultaneous detailed monitoring of equipment load levels, self-test
data and utility power conditions via all 3 network interfaces simultaneously. Includes PowerAlert monitoring software and complete cabling.
Emergency Power Off (EPO) interface. Compatible with Tripp Lite's WatchDog software. 4-post rackmount accessories included; optional
2-9USTAND tower stand kit and 2POSTRMKITWM 2-post rack & wallmount accessories available. Field-replaceable, hot-swappable internal
batteries and external battery packs. Attractive all-black color scheme.
Package Includes
SUINT1500RTXL2Ua Online Double-Conversion UPS System
PowerAlert Software and Cabling
Mounting Hardware
Owner's Manual with Warranty Information
1-6ft. IEC-320-C13 to IEC-320-C14 interconnect cable and 1-10ft. IEC-320-C13 to IEC-320-C14 power connection cable
Features
True online, double conversion UPS provides pure sine wave AC output at all times
Maintains continuous operation through blackouts, voltage fluctuations and surges with zero transfer time to battery
Removes harmonic distortion, electrical impulses, frequency variations and other hard-to-solve power problems
Accepts input voltages between 130 and 275V (between 160 and 275V at loads over 70%), regulating output to 200/208/220/230/240V
+/-2%
1500VA / 1200 watt power capacity with 6 IEC-320-C13 output receptacles
IEC320-C14 input connection accepts a variety of detachable cordsets to match country or site-specific wall receptacles
2 C13 to C14 output power cables included
Standard internal battery set provides 12 minutes runtime at half load and 4.5 minutes runtime at full load
Optional BP48V24-2U (limit 1), BP48V60RT-3U (multi-pack compatible) and BP48V27-2US (multi-pack compatible) external battery packs
Some external battery configurations require the use of Tripp Lite's External Battery Configuration Software (see manual)
Output AC waveform
(AC mode)
Sine wave
Output AC waveform
(battery mode)
Pure Sine wave
INPUT
Rated input current
(at maximum load)
6.4A
Nominal Input
Voltage(s) Supported
200V AC; 220V AC; 230V AC; 240V AC
C14 inlet
UPS input connection
type
UPS input connection
description
IEC320-C14 input connection accepts a variety of detachable cordsets to match country or site-specific wall
receptacles
Input circuit breaker
10A
Phase
Single-Phase
BATTERY
Full load runtime
(minutes)
4.5 min. (1200w)
Half load runtime
(minutes)
12 min. (600w)
Expandable battery
runtime
Extended runtime supported via optional external battery packs
External battery pack
compatibility
DC system voltage
(VDC)
48
Battery recharge rate
(included batteries)
Less than 6 hours from 10% to 80%
Replacement battery
cartridge (internal
UPS battery
replacement)
Battery Access
Front panel battery access door
Battery replacement
description
Hot-swappable, user replaceable batteries
VOLTAGE REGULATION
Voltage regulation
description
Online, double-conversion power conditioning
Overvoltage
correction
2% output voltage regulation during overvoltages to 275
2% output voltage regulation during undervoltages to 156
2% output voltage regulation during undervoltages to 130 (under 70% load only)
Undervoltage
correction
Severe undervoltage
correction
LEDS ALARMS & SWITCHES
LED Indicators 14 LEDs indicate line power, online mode, economy/bypass mode, on-battery, overload, battery low, replace battery
and fault status information; 4-LED meter displays load and battery charge levels; LED panel rotates for viewing in
rack/tower formats
Alarms
Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions
Power-fail alarm can be silenced using alarm-cancel switch
Alarm cancel
operation
Switches
2 Switches control off/on power status and alarm-cancel/self-test operation
SURGE / NOISE SUPPRESSION
UPS AC suppression
joule rating
480
UPS AC suppression
response time
Instantaneous
Yes
EMI / RFI AC noise
suppression
PHYSICAL
Installation form
factors supported
with optional
2 post rackmount (2POSTRMKITWM); Wallmount (2POSTRMKITWM); Tower (2-9USTAND)
accessories
Primary form factor
Rackmount
UPS / Power Module
dimensions in
3.5 x 17.5 x 19
primary form factor
(height x width x
depth / inches)
UPS / Power Module
dimensions in
8.9 x 44.4 x 48.3
primary form factor
(height x width x
depth / cm)
Rack Height
2U
Secondary form factor
47.5
UPS / Power Module
weight (lbs)
UPS / Power Module
weight (kg)
21.6
UPS Shipping
9.8 x 20.2 x 24
dimensions (height x
width x depth / inches)
UPS Shipping
24.8 x 51.4 x 61
dimensions (height x
width x depth / cm)
Shipping weight (lbs)
Shipping weight (kg)
Cooling method
60
27.2
Fan
Steel
UPS housing material
ENVIRONMENTAL
Operating
Temperature Range
+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Storage Temperature
Range
Relative Humidity
0 to 95%, non-condensing
664.2
AC mode BTU / hr.
(full load)
AC economy mode
BTU / hr. (full load)
260.4
664.2
86%
Battery mode BTU /
hr. (full load)
AC mode efficiency
rating (100% load)
AC economy mode
efficiency rating
(100% load)
94%
Audible Noise
45dBA At Front Side 1 Meter
COMMUNICATIONS
Communications
interface
USB (HID enabled); DB9 Serial; Contact closure; EPO (emergency power off); Slot for SNMP/Web interface
Network monitoring
port description
Supports detailed monitoring of UPS and site power conditions; DB9 port supports RS232 and contact closure
communications
PowerAlert software
Included
Communications
cable
USB and DB9 cabling included
WatchDog
Supports Watchdog application, OS and hard-reboot restart options for remote applications
compatibility
LINE / BATTERY TRANSFER
Transfer time
No transfer time (0 ms.) in online, double-conversion mode
160V (100% load), 130V (
Low voltage transfer
to battery power
(setpoint)
High voltage transfer
to battery power
(setpoint)
275
SPECIAL FEATURES
Cold Start (startup in
battery mode during
a power failure)
Cold-start operation supported
High availability UPS
features
Automatic inverter bypass; Hot swappable batteries
Green & high
efficiency features
High efficiency economy mode operation; Individually controllable load banks; Schedulable daily hours of economy
mode operation
CERTIFICATIONS
UPS Certifications
CE
UPS Certification
details
Kuwait, EMI Approvals: EN62040-2
WARRANTY
Product Warranty
Period (Worldwide)
2-year limited warranty
Related Items
Optional Products
Related Model
Description
Qty.
BP48V27-2US - 2U External 48V Rack/Tower Battery pack for select Tripp Lite UPS
Systems
1
BP48V242U - External Battery Pack for UPS System
1
1
1
External Battery Pack and Cable. 3U, Expandable, Blue 2-Point Connector
Power Management Tools - UPS Communication Cable Kit for System i / AS400 /
iSeries Servers
For remote monitoring and control via MODBUS protocol
For remote monitoring and control via SNMP, Web or Telnet
1
1
1
Monitors temperature, humidity and contact-closure inputs. (Requires UPS with
SNMPWEBCARD, monitored PDU or switched PDU.)
Magnetic Door Switch Kit for front and rear doors; requires ENVIROSENSE
Heavy-Duty 2-post Front Mounting Ear Kit
1
1
1
1
Enables 2-Post Rackmount or Wallmount Installation of Select Rackmount UPS Systems
Enables 2-Post Rackmount Installation of 3U and Larger UPS, Transformer and Battery
Pack Components
Single-Phase Basic PDU, 16A 100-240V, 1U Rackmount, C13 C19 outlets, C20 input
and C14, L6-20P, L5-20P, 5-20P and 5-15P adapters
1
1
Single-Phase Switched PDU, 15A 200-240V, 1U Horizontal Rackmount, 8 C13 outlets,
C14 inlet with C14 power cable
More information, including related products, owner's manuals, and additional technical specifications, can be found online at
Copyright © 2014 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous
improvement. Specifications are subject to change without notice. Photos may differ slightly from final products.
|