Project
Quantity
Item #
Model Specified:
CSI Section 11400
Reach-In/Pass-Thru Refrigerated-Heated
Models/Self-Contained
Two Section Models, 32" Deep
Full Length Door Reach-In Model
Half Length Door Reach-In Model
RDH232WUT-FHS
RDH232WUT-HHS
R
Full Length Door Pass-Thru Model
Half Length Door Pass-Thru Model
RDH232WPUT-FHS
RDH232WPUT-HHS
SERIES
Stainless Exterior
& Interior
INTELA-TRAUL®
Equipped!
Full Length Door Reach-In Model
Half Length Door Reach-In Model
ADH232WUT-FHS
ADH232WUT-HHS
A
Full Length Door Pass-Thru Model
Half Length Door Pass-Thru Model
ADH232WPUT-FHS
ADH232WPUT-HHS
SERIES
Stainless Exterior,
Anodized
Aluminum Interior
The R &ASeries represent Traulsen's Top-of-the-Line product offering. The
reach-in and pass-thru refrigerated/heated models are all designed to offer
maximum interior storage capacity. Each is supplied standard with such high
quality features as balanced refrigeration systems, microprocessor controls,
communications ability and stainless steel exteriors. Additionally, they offer
the widest range of optional accessories to choose from, and can be
specified for use with many different applications, including: Foodservice,
Correctional, Institutional, Export, etc.
Model RDH232WUT-FHS
(shown with standard left/right hinging)
Standard Product Features
Options & Accessories
•
•
•
•
R-Series: Stainless Steel Exterior & Interior
•
Stainless Steel Finished Back With Rear Louvers (reach-in
models only)
A-Series: Stainless Steel Exterior/Anodized Aluminum Interior
INTELA-TRAUL® Microprocessor Control System
One-Time Start-Up Temperature Adjustment Feature &
ON/OFF Switch (for heated compartment only)
Balanced, Self-Contained Refrigeration System Using R-134a
Scroll Blower Type Evaporator Fan & Biased Return Air Duct
Full or Half Length Stainless Steel Doors With Locks
Self-Closing Doors With Stay Open Feature At 120 Degrees
Guaranteed For Life Cam-Lift Hinges & Door Handles
Standard Door Hinging: 232W = Left/Right, F & R: 232WP =
Left/Right (other hingings available)
•
•
Re-Hinging Feature For Door(s)
No. 1 Type Tray Slides To Accommodate either (1) 18" x 26"
or (2) 14" x 18" Sheet Pans, Adjustable To 2" O.C.
No. 2 Type Tray Slides To Accommodate (1) 18" x 26" Sheet
Pans, Adjustable To 2" O.C.
No. 3 Type Tray Slides To Accommodate (2) 12" x 20" Steam
Table Pans, Adjustable To 2" O.C.
No. 4 Type Tray Slides To Accommodate (1) 18" x 26" Sheet
Pans (chrome rod type, equips 1/2 section)
Universal Type Tray Slides To Accommodate Either (1)
18" x 26" or (2) 14" x 18" Sheet Pans, or (2) 12" x 20" Steam
Table Pans, Adjustable To 4" O.C.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Stainless Steel Breaker Caps
Chrome Plated Adjustable Shelves (installed at the factory)
Automatic Non-Electric Condensate Evaporator
Magnetic Snap-In Door Gaskets
•
•
•
•
•
•
•
•
•
•
•
•
•
Additional Chrome Plated Shelves
Locking Hasps (padlocks supplied by others)
Export 220/50/1 Voltage
Stainless Steel Shelves In Lieu of Standard Chrome Plated
Kool Klad Exterior Laminate Decor
Set of Four (4) 6" High Casters In Lieu of Legs
Set of Four (4) 4-5/8" High Casters In Lieu of Legs
4-1/2" High Stainless Steel Base In Lieu of Legs
6" High Stainless Steel Kickplate (for use with standard legs)
Prison/Correctional Facilities Options
Remote Applications (see spec sheet 12-2 for more details)
Clear Glass Door(s) In Place Of One Or More Door(s)
Two Year Service/Labor Warranty Available
Gasket Protecting Metal Door Liner
Controllable Anti-Condensate Door Perimeter Heaters
Stainless Steel One-Piece Louver Assembly & Heater Guards
9' Cord & Plug Attached
Set of Four (4) 6" High Adjustable Stainless Steel Legs
One Year Parts And Labor Warranty
Two Year Control Warranty (parts and labor)
Five Year Compressor Warranty
Listed by Underwriters Laboratories Inc.,
and classified by Underwriters Laboratories
Inc., in accordance with ANSI/NSF7.
Approval: ___________________________________
TRAULSEN
4401 BLUE MOUND RD.
PHONE 1 (800) 825-8220
FT. WORTH, TX 76106
FAX-MKTG. 1 (817) 624-4302
SECTION
3-7
Elevation - R/ADH232WPUT
Plan - R/ADT232WPUT
Section - R/ADH232WPUT
TRAULSEN
4401 BLUE MOUND RD.
PHONE 1 (800) 825-8220
FT. WORTH, TX 76106
FAX-MKTG. 1 (817) 624-4302
SECTION
3-7
Project
Quantity
Item #
Model Specified:
CSI Section 11400
Specifications
Construction, Hardware and Insulation
Refrigeration System
Cabinet exterior front, one piece sides, louver assembly and doors are constructed
of 20 gauge stainless steel with #4 finish. Cabinet interior and door liners are
constructed of stainless steel (anodized aluminum in theA-Series). The exterior cabinet
top, and bottom are constructed of heavy gauge aluminized steel. The exterior
cabinet back on reach-in models is constructed of heavy gauge aluminized steel. A
set of four (4) adjustable 6" high stainless steel legs are included.
A top mounted, self-contained, balanced refrigeration system using R-134a
refrigerant is conveniently located behind the one piece louver assembly. These
models feature an easy to clean front facing condenser, thermostatic expansion
valve, air-cooled hermetic compressor, plenum effect blower coil, large, high
humidity evaporator coil located outside the food zone and a top mounted non-
electric condensate evaporator.
Doors are equipped with a gasket protecting metal door pan, removable plug
cylinder locks and guaranteed for life cam-lift, gravity action, self-closing metal, glide
hinges with stay open feature at 120 degrees. Hinges include a concealed switch to
automatically activate the interior incandescent lighting. Guaranteed for life, work
flow door handles are mounted horizontally over recess in door which limits
protrusion from door face into aisleways. Doors have seamless, polished metal
corners.
Biased return air duct protects against introduction of warm kitchen air, promoting
even temperature maintenance and efficient operation.
A 9' cord and plug is provided standard. Standard operating temperatures are 34 to
38°F for the refrigerator compartment and 135 to 180°F for the heated compartment.
Heating System
A low watt density, serpentine style, heater is employed for the generation of electric
heat. Low velocity air is forced across its large surface area to efficiently move heat
radiating away from these through a down-air distribution duct, where it is then evenly
distributed throughout the cabinet, assuring the proper holding environment for hot
food product, without drying. A vent, located at the top of the cabinet, is included
for positive humidity control.
Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal.
Anti condensate heaters are located behind each door opening.
Both the cabinet and doors are insulated with an average of 2" thick high density,
non-CFC, foamed in place polyurethane.
Controller
The easy to use water resistant INTELA-TRAUL® microprocessor control system is
supplied standard. Unit is NAFEM Data Protocol communication (NDP) ready.
Optional hardware required to be NDP compliant. Third party software required for
network connection. It includes a 3-Digit LED Display, Fahrenheit or Celsius
Temperature Scale Display Capability, and an RS485 data port. In addition it
includes audio/visual alarms for: Hi/Lo Cabinet Temperature, Door Open, Clean
Condenser, Evaporator Coil and Discharge Line Sensor Failures, and Power Supply
Interruption. A separate control is provided for both the refrigerated and heated
compartments.
DIMENSIONAL DATA
Cabinet Type
R/ADH232WUT
Reach-In
R/ADH232WPUT
Pass-Thru
Net capacity total cu. ft.
Length - overall in.
51.6 (1462 cu l)
58 (147.3 cm)
35 (88.8 cm)
32 (81.3 cm)
5711⁄16 (146.5 cm)
211⁄8 (53.6 cm)
271⁄2 (69.9 cm)
575⁄8 (146.3 cm)
831⁄4 (211.5 cm)
6
54.2 (1535 cu l)
58 (147.3 cm)
3715⁄16 (96.4 cm)
32 (81.3 cm)
833⁄8 (211.8 cm)
211⁄8 (53.6 cm)
271⁄2 (69.9 cm)
575⁄8 (146.3 cm)
831⁄4 (211.5 cm)
6
Depth - overall in.
Depth - over body in.
Depth - door(s) open 90° in.
Clear door width in.
Clear half-door height in.
Clear full-door height in.
Height - overall on 6" legs
No. Standard Shelves
Shelf area total sq. ft.1
Shelf area refrigerator. sq. ft.1
Shelf area heated section sq. ft.1
RDH Net Wt. lbs.
Interior
Standard interior arrangements include three (3) chrome plated wire shelves per
section, mounted on pilasters. Shelves are full-width, and do not have any large
gaps between them requiring the use of "bridge" or "junior shelves." Recommended
load limit per shelf should not exceed 225 lbs. Optional tray slides may be
purchased in combination with, or in lieu of these. Both standard and optional
interior arrangements are completely installed at the factory.
37.6 (3.49 sq m)
18.8 (1.75 sq m)
18.8 (1.75 sq m)
630 (286 kg)
550 (249 kg)
37.6 (3.49 sq m)
18.8 (1.75 sq m)
18.8 (1.75 sq m)
685 (311 kg)
Warranties
Both a one year parts and labor warranty and a five year compressor warranty (self-
contained models only) are provided standard. An optional 2nd year extended parts
and labor warranty is also available. In addition the INTELA-TRAUL® controls are
warranted by a two year parts and labor warranty.
ADH Net Wt. lbs.
605 (274 kg)
ELECTRICAL DATA
Voltage
208/115/60/1
208/115/60/1
Equipped With One NEMA L14-20P Plug
Feed wires with Ground
Heater Wattage @ 208V
Full load amperes
4
4
1500
13.5
1500
13.5
NOTE: Full load amps and plug style may vary depending
on electrical options chosen and condensing unit employed.
REFRIGERATION DATA
Refrigerant
R-134a
R-134a
REQUIRED CLEARANCES
BTU/HR H.P.2
2220 (1⁄3 HP)
2220 (1⁄3 HP)
In order to assure optimum performance, the condensing unit MUST have an adequate supply of
air for cooling purposes. Therefore, the operating location must either have a minimum of 12”
clearance overhead of the condensing unit or allow for unrestricted air flow at the back of the unit.
Clearance of at least 12” above is required in order to perform certain maintenance tasks.
NOTES
NOTE: Figures in parentheses reflect metric equivalents.
1=
Area of standard shelf compliment only, does not include storage area of additional shelves or available
on cabinet bottom.
2=
3=
Based on a 90 degree F ambient and 20 degree F evaporator.
For approximate remote weights deduct 40 lbs. from respective net or gross weight. For other
information on remote models, please refer to spec sheet 12-2.
NOTE: When ordering please specify: Voltage, Hinging, Door Size, Options and any
additional warranties.
Continued product development may necessitate specification changes without notice.
Part No. TR35785 (revised 1/07)
TRAULSEN
4401 BLUE MOUND RD.
PHONE 1 (800) 825-8220
FT. WORTH, TX 76106
FAX-MKTG. 1 (817) 624-4302
SECTION
3-7
|