INSTRUCTION MANUAL
CCD COLOR CAMERA
IK-65WDA
Please read this manual thoroughly before use,
and keep it handy for future reference.
Record in space provided below the Model No. and
the Serial No. as found on the bottom of this unit.
Model No. IK-65WDA Serial No. ____________
Retain this information for future reference.
TABLE OF CONTENTS
Important Safeguards
1. Features & Description·······································································4
2. Cautions ······························································································4
3. Components························································································4
4. Part Name & Functions ······································································5
5. Connections and Operations ·····························································6
6. Line-Lock Phase ··················································································9
7. DIP Switch Settings ············································································9
8
Menu-Driven set-up··········································································11
9. Remote Control·················································································26
10. Note on Use and Installation ···························································27
11. In Case of Problems ·········································································28
12. Specifications····················································································29
13. Exterior View·····················································································30
The CAUTION label, shown on the left, is
attached on the bottom of camera.
The lightening flash with arrowhead symbol, within an equilateral triangle,
is intended to alert the user to the presence of uninsulated "dangerous
voltage" within the product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
WARNING:
CAUTION
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE.
CONNECT 24V AC UL LISTED
CLASS 2 POWER SUPPLY.
FIELD INSTALLATION MARKING:
WORDED : ”THIS INSTALLATION SHOULD BE MADE BY A QUALIFIED SERVICE
PERSON AND SHOULD CONFORM TO ALL LOCAL CODES.”
Note : The camera is indoor used
INFORMATION
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses , and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipmetn in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
USER-INSTALLER CAUTION :Your authority to operate this FCC verified equipment
could be voided if you make changes or modifications not expressly approved by the
party.
3
1.FEATURES & DESCRIPTION :
(1) IK-65WDA has the following functions.
(1)133 Times Dynamic Range
Toshiba developed algorithms that enable industry leading dynamic range
(2)Digital Noise Reduction (“DNR”)
Exclusive 3 Dimensional Digital Noise Reduction boosts S/N ratio to a incredible 53dB
(3)0.001Lux @ 1.2Minimum Illumination in slow shutter mode
User-definable Sensitivity levels ensure best image quality reproduction dependent
on available lighting conditions
(4)User-Definable DAY/NIGHT Threshold
Customize the color to black & white conversion level according to your application
needs
(5)MENU-DRIVEN Programming
(6)Remote control from a keyboard etc, by RS422.
(7)Up to 1/100,000 sec shutter speed
(8)520 horizontal TV lines in HI-RESO mode
(9)Easy installation into any AC 24V~/DC 12V system
2.CAUTIONS :
(1)In order to protect the camera, avoid placing or using it under direct sunlight, rain or
dust.
(2)Avoid touching the CCD sensor with your fingers. If necessary, use a soft cloth moist-
ened with alcohol to wipe off any dust.
(3)When the camera is not in use, keep the lens or lens cap attached to protect the CCD
sensor.
(4)Avoid aiming the camera at the sun.
(5)Avoid shooting the camera at intense light. Intense light such as a spotlight may cause
a bloom or smear. A vertical stripe may appear on the screen. However, this is not a
malfunction.
(6)Install the camera away from video noise. If cables are wired near electric lighting
wires or a TV set, noise may appear in images. In this event, relocate cables or reinstall
equipment.
3.COMPONENTS :
(1)Camera
1
(2)Accessories
(a) Lens Connector
(b) Instruction Manual
(c) Lens Cap
1
1
1
(E4-191J-100(M))
(d) Lens, coaxial cable and power cord are not supplied with camera.
4
4.PART NAMES & FUNCTIONS :
5
5.CONNECTIONS AND OPERATIONS :
Notes on connecting
• Power plugs of connected equipment must be disconnected before installations.
• A 75-ohm coaxial cable (3C-2V or 5C-2V) is required for standard connection.
• For details of wiring and operation of equipment to be connected, refer to their
operation manuals.
• Lenses, coaxial cables for video signals and the power cord are not supplied with
the camera.
Refer to the operations manuals of connected equipment for detailed wiring and
overall operation instructions.
5.1 Basic connection for a single system configuration
Rx
Rx
Keyboard
CAUTION: Never input 24V AC and 12V DC at the same time.
Do not overload power supply
Since this camera uses 24V AC UL Listed Class 2 power supply or 12V DC power
supply, it should be connected to a power supply that allows for at least 7w con-
sumption.
6
5.2 Line-Lock Control
• Matching the vertical synchronization with the power frequency is called the Line-Lock.
• This function is activated when the LINE LOCK switch is selected to ON.
• When two or more cameras are switched by the video switcher for viewing by a moni-
tor TV, the vertical sync. Phase can be locked with the power frequency, and a stable
vertical sync. Is obtained without being disturbed at the time of switching.
Note:
• The camera is synchronized to the power frequency of 60 1Hz covering a
normal fluctuation of the power frequency. However, the camera may not
cover a large fluctuation caused from the power generated by an engine
generator, etc.
• It takes about 10 seconds or more until a stable synchronization is obtained
after the power is turned on. This is normal, because several seconds are
required to stabilize the camera against power noise.
• Refer to "6.LINE-LOCK PHASE" for adjustment.
5.3 Operation
(1)Before mounting a lens, check whether it is a "C" mount or "CS" mount type lens. If a
"C" mount lens is used, an adapter ring is required and the back focus will need to be
adjusted.
(2)Mount the lens on the camera by turning the lens clockwise. Adjust the diaphragm and
focus for optimum image.
(3)Connect the VIDEO output to the video monitor. The picture will appear on the moni-
tor screen as the power is supplied to the camera.
(4)Adjust the focus and aperture of the lens for best image quality.
7
5.4 Back focus adjustment:
Back focus is adjusted at the factory to accom-
modate most standard lenses. If a slight adjust-
ment is needed, mount the lens to the camera
first. Then loosen the Focus Lock Screw. Rotate
the Focus ring until a clear image is achieved.
Retighten the Focus Lock Screw.
NOTE
• When the lens weight is more than 2.2 lbs., support the camera on the lens
side rather than relying on the tripod mount of the camera.
5.5 Lens
This camera supports DC (direct drive) type of
auto-iris lens:
Connect the auto-iris connector plug to the IRIS
terminal on the side of the camera. Refer to the
cart below for correct wiring and set up.
Change the IRIS switch (DIP SWITCH SETTINGS
on rear panel) to select DC.
Direct Drive
IRIS Lens
1. Damp-(y)
IRIS
2. Damp+(r)
terminal
pin
3. Driver+(wh)
4. Driver-(g)
8
6.LINE-LOCK PHASE :
When a video switcher switches two or more
cameras, the picture may fluctuate on the video
monitor due to the different AC line phase of
each camera. In this case, adjust the V PHASE
controller (on rear panel) to get a stable image.
The camera is in the Line-Lock Mode. Line-Lock
phase is set 0-300 degrees by adjusting the V
phase control at the rear of the camera.
V. PHASE CONTROLLER
7.DIP SWITCH SETTINGS :
The following settings can be performed by setting the rear dip switches.
7.1 LINE LOCK (DIP1) : ON/OFF
The line lock functions with AC24V power and
the switch on the ON side.
7.2 IRIS (DIP2) : AES/DC
AES/DC select switch.
AES (ON side) : Auto electronic shutter function.
DC (OFF side) : When using AI lens without amp.
7.3 WDR (DIP3) : ON/OFF
With this switch ON, wide dynamic range func-
tion (WDR) is activated.
When WDR function is activated, the video of
each Field is mixed. When this happens, verti-
cal resolution And the number of the frames
decrease slightly.
9
7.4 DN (DIP4) : MID/S.DNx32
DN mode select switch.
MID (ON side) :
In low light conditions the IK-65WDA automatically cuts the chroma signal and boots
the gain up of the luminance by 6dB.
S.DN×32 (OFF side) :
Under the low light condition, the IK-65WDA automatically activates the slow shutter
function.
FACTORY SETTINGS
LINE LOCK : ON
IRIS
WDR
DN
: DC
: OFF
: S.DN×32
NOTE
• When you change DIP 2, 3 or 4 then the present settings are displayed for
about 2 seconds on the upper left side of the screen.
• When the on screen menu (“OSD”) is displayed and DIP 3, 4 is changed, then
the present settings are stored and the OSD ends.
10
8.MENU DRIVEN SET-UP :
The following is the on-screen menu (“OSD”) structure for all settings and adjustments
of the camera.
RS422 setting menu
ADDRESS
PROTOCOL
BIT-RATE
VERSION
EXIT
001~255
MENU
TOSHIBA-P
TOSHIBA-D
1200
2400 4800 9600
****************
DEFAULT
MAIN menu (Except for DIP3 and DIP4 ON)
ALC
BLC
–99~99
OFF
AUTO
UPPER2/3
LOWER2/3
SIDE1/6
CENTER1/3
CENTER1/6
GAIN
STD
HIGH
MENU
****************
ID.
IDPOS
OFF
TOP
BOTTOM
EXIT
CANCEL
DEFAULT
11
ADVANCED MAIN menu (DIP3 and DIP4 ON)
SHUTTER
NO-D/N
D/N
LOW
x128
MID
x64
HIGH
x32
S. D/N
x16
x1
x8
x4
x2
WDR
ALC
BLC
OFF
ON
–99~99
OFF
AUTO
UPPER2/3
LOWER2/3
CENTER1/3
CENTER1/6 SIDE1/6
GAIN
OFF
STD
MID
HIGH
HIGH
SHARPNESS
WHITE BAL
LOW
MENU
AUTO:
–20~20
R:
–99~99
B:
–99~99
INDOOR1
INDOOR2
OUTDOOR
...........
ID.
ID. POS
PTN-GEN
AWB-RNG
DNR
OFF
OFF
STD
LOW
OFF
TOP
BOTTOM
COLOR
WIDE
HIGH
ON
STEP
GRID
MULTI
SUPER
HI-RESO
EXIT
CANCEL
DEFAULT
12
8.1 Setting switches and the functions
On the side panel of the cameras there are three push button switches as shown below:
Switch name
Main function
Select
Setting mode call on/off, setting entry
Setting item selection (down)
Setting item selection (up)
8.2 On Screen MAIN menu (Except for DIP3 and DIP4 ON)
The camera is adjusted using the On Screen
Menu.
Displays the present state
of the rear switches.
Press and hold the select switch on the side
of the camera body 2 seconds until the menu
appears on the monitor. The shaded area
represents the option to be set.
(Displayed when both DIP3 and DIP4 on the
rear are not set to ON).
WDR
D / N
A L C
B L C
GA I N
- CHG D I P SW
* * *
- CHG D I P SW
L E V : 0 0
AU TO
* * * * *
S T D
I D
.
. . . . . . . . . . . . . . . . . . . .
I D - P O S O F F
E X I T CANC E L D E F AU L T
(1) WDR = Wide dynamic range function
Displays the rear switch status of the switch (DIP 3).
(2) D/N = DAY/NIGHT function
Displays the rear switch status of the switch (DIP 4).
(3) ALC = Automatic level control
WDR
- CHG D I P SW
- CHG D I P SW
L E V : 0 0
AU TO
* * *
D / N
A L C
B L C
Move the cursor to the position shown in fig.
Use the ꢀ ꢁ SELECT switches to adjust the
ALC level to reach the desired luminosity.
* * * * *
GA I N
S T D
I D
.
. . . . . . . . . . . . . . . . . . . .
I D - P O S O F F
E X I T CANC E L D E F AU L T
13
(4) BLC = Back light compensation
Move the cursor to the position in Fig.
Use the SELECT switches to select
OFF, AUTO, UPPER2/3, LOWER2/3, CENTER1/
WDR
D / N
A L C
B L C
GA I N
- CHG D I P SW
- CHG D I P SW
L E V : 0 0
AU TO
* * *
* * * * *
3, CENTER1/6, LOWER1/6
Using in AES or auto iris lens, the exposure
adjustment is automatically controlled so that
the best picture is obtained at next monitor
zone. This function is effective when strong
light enters and auto iris lens closes.
OFF:The camera is not in BLC mode.
S T D
I D
.
. . . . . . . . . . . . . . . . . . . .
I D - P O S O F F
E X I T CANC E L D E F AU L T
The area size is approximately the following:
(Appropriately maintain the shaded area of the video level)
OFF
UPPER 2/3
LOWER 2/3
3
1
2
1
3
V
V
2
3
V
V
2
3
1
3
CENTER 1/3
CENTER 1/6
SIDE 1/6
6
4
5
1
3
1
1
V
V
V
V
V
3
3
1
3
1
3
1
3
V
V
V
V
1
3
1
3
1
3
1
3
1
3
1
3
1
4
1
2
1
4
1
4
1
2
1
4
H
H
H
H
H
H
H
H
H
AUTO
7
Depending on the subject conditions, areas 1 to 6 can be combined.
NOTE
• The camera automatically decides which areas are dark in AUTO mode, and
the brightness for these areas are adjusted to their optimum levels. Conse-
quently, the bright parts of the image may be affected may be affected.
14
(5) GAIN = AGC gain setting
Move the cursor to the position in Fig.
Use the SELECT switches to select OFF, STD,
HIGH.
WDR
D / N
A L C
B L C
GA I N
- CHG D I P SW
- CHG D I P SW
L E V : 0 0
AU TO
* * *
* * * * *
OFF
STD
:
:
AGC does not operate.
Standard position, max gain = 24dB
S T D
I D
.
HIGH : High-Sensitivity position, max gain
. . . . . . . . . . . . . . . . . . . .
I D - P O S O F F
= 30dB
(If there is noise in low light condi-
tions, set to STD.)
E X I T CANC E L D E F AU L T
NOTE
• If the SHUTTER settings are set to S.D/N (excluding X1), then OFF cannot be
set.
(6) ID. = Camera ID.
Move the cursor to the position shown in fig.
Use the SELECT switches to name each cam-
era up to 20 characters.
WDR
D / N
A L C
B L C
GA I N
- CHG D I P SW
- CHG D I P SW
L E V : 0 0
AU TO
* * *
Font list
0,1,2,3,4,5,6,7,8,9
A,B,C,D,E,F,G,H, I ,J,K,L,M
N,O,P,Q,R,S,T,U,V,W,X,Y,Z
. , : ?+—x / &<> ( ) · (SPACE)
* * * * *
S T D
I D
.
. . . . . . . . . . . . . . . . . . . .
I D - P O S O F F
E X I T CANC E L D E F AU L T
(7) ID. POS = Camera ID. Position
Move the cursor to the position shown in fig.
Use the SELECT switches to select OFF, TOP,
BOTTOM. Show the Camera ID in monitor
screen.
WDR
D / N
A L C
B L C
GA I N
- CHG D I P SW
- CHG D I P SW
L E V : 0 0
AU TO
* * *
* * * * *
S T D
OFF
TOP
: The camera ID is not displayed
: The camera ID is displayed at the
top-left of the monitor
I D
.
. . . . . . . . . . . . . . . . . . . .
I D - P O S O F F
BOTTOM : The camera ID is displayed at the
bottom-left of the monitor.
E X I T CANC E L D E F AU L T
15
(8) CANCEL
Move the cursor to the position in fig.
Press the SELECT switch to exit the menu
without saving and changes.
WDR
D / N
A L C
B L C
GA I N
- CHG D I P SW
- CHG D I P SW
L E V : 0 0
AU TO
* * *
* * * * *
S T D
I D
.
. . . . . . . . . . . . . . . . . . . .
I D - P O S O F F
E X I T CANC E L D E F AU L T
(9) EXIT
Move the cursor to the position in fig.
Press the SELECT switch when SAVE ALL
SETTING (excluding WDR, D/N settings) is
displayed to save all changes and exit the
menu.
WDR
D / N
A L C
B L C
GA I N
- CHG D I P SW
- CHG D I P SW
L E V : 0 0
AU TO
* * *
* * * * *
S T D
I D
.
. . . . . . . . . . . . . . . . . . . .
I D - P O S O F F
E X I T CANC E L D E F AU L T
(10) DEFAULT
Move the cursor to the position in fig.
Press the SELECT switch to select DEFAULT,
which returns the camera to its factory set-
tings.
WDR
D / N
A L C
B L C
GA I N
- CHG D I P SW
- CHG D I P SW
L E V : 0 0
AU TO
* * *
* * * * *
S T D
Default settings
I D
.
. . . . . . . . . . . . . . . . . . . .
I D - P O S O F F
WDR
D / N
A L C
B L C
GA I N
- CHG D I P SW
- CHG D I P SW
L E V : 0 0
AU TO
* * *
* * * * *
E X I T CANC E L D E F AU L T
S T D
I D
.
. . . . . . . . . . . . . . . . . . . .
I D - P O S O F F
NOTE
• The ADVANCED MAIN menu contents change to the default settings.
16
8.3 On Screen ADVANCED MAIN menu (DIP3 and DIP4 ON)
The camera is adjusted using the On Screen
Menu.
Press and hold the select switch on the side
of the camera body 2 seconds until the menu
appears on the monitor. The shaded area rep-
resents the option to be set.
S HU T T E R
WDR
D / N : M I D
ON
A L C
L E V : 0 0
AU TO
B L C
GA I N
S T D
S HAR P N E S S M I D
(Displayed when both DIP3 and DIP4 on the
rear are set to ON.)
WH I T E - B A L AU TO : 0 0
N E X T
E X I T CANC E L D E F AU L T
(1) SHUTTER
Move the cursor to the position in fig.
Use the SELECT switches to select NO-D/N,
D/N, S.D/N.
S HU T T E R
WDR
D / N : M I D
ON
A L C
L E V : 0 0
AU TO
B L C
GA I N
NO-D/N (NO DAY/NIGHT FUNCTION) :
Exposure time is fixed at 1/60 sec.
The control of the luminosity is done with
the DC Lens.
S T D
S HAR P N E S S M I D
WH I T E - B A L AU TO : 0 0
N E X T
D/N (DAY/NIGHT function) :
E X I T CANC E L D E F AU L T
In low light conditions the IK-65WDA auto-
matically cuts the chroma signal level and
boosts the gain up of the luminance by 6dB.
a. LOW : The chroma cut level is set less than 20 to 30IRE.
b. MID The chroma cut level is set less than 30 to 40 IRE.
:
c. HIGH : The chroma cut level is set less than 40 to 50 IRE.
“HIGH” is for a brighter setting than “LOW”
S.D/N (SUPER DAY/NIGHT FUNCTION) :
Under the low light condition, the IK-65WDA automatically activates the slow shutter
function.
Practical Application
IRIS (DIP2) : DC
SHUTTER MODE
NO-D/N
LENS TYPE
Auto iris
SHUTTER
1/60
D/N
S.D/N
Auto iris+(6 dB gain up)
Auto iris
1/60
X128 - 1/60
IRIS (DIP2) : AES
SHUTTER MODE
NO-D/N
LENS TYPE
Fixed iris
Fixed iris+(6 dB gain up)
Fixed iris
SHUTTER
1/60 - 1/10K
1/60 - 1/10K
X128 - 1/10K
D/N
S.D/N
A DC lens opens when AES mode is chosen.
17
(2) WDR = Wide dynamic range function
Move the cursor to the position shown in fig.
Use the
or ON in the WDR setting.
When WDR is set to ON, WDR activates au-
tomatically.
When WDR function is activated, the video
of each field is mixed. When this happens,
vertical resolution and the number of the
frames decrease slightly.
SELECT switches to select OFF
S HU T T E R
WDR
D / N : M I D
ON
A L C
L E V : 0 0
AU TO
B L C
GA I N
S T D
S HAR P N E S S M I D
WH I T E - B A L AU TO : 0 0
N E X T
E X I T CANC E L D E F AU L T
(3) ALC = Automatic level control
Refer to 8.2 (3).
(4) BLC = Back light compensation
Refer to 8.2 (4).
(5) GAIN = AGC gain setting
Refer to 8.2 (5).
(6) SHARPNESS
Move the cursor to the position shown in fig.
S HU T T E R
WDR
D / N : M I D
ON
Use the
SELECT switches to select LOW,
MID, High in the SHARPNESS setting.
A L C
L E V : 0 0
AU TO
B L C
GA I N
S T D
S HAR P N E S S M I D
WH I T E - B A L AU TO : 0 0
N E X T
E X I T CANC E L D E F AU L T
18
(7) WHITE BAL (WHITE BALANCE)
Move the cursor to the position shown in fig.
Use the
SELECT switches to select
S HU T T E R
WDR
D / N : M I D
ON
AUTO, MANUAL in the WHITE BAL settings.
A L C
L E V : 0 0
AU TO
B L C
GA I N
AUTO : The white balance is automatically
adjusted corresponding to the color
temperature variations on the ob-
ject. The camera is applicable to a
color temperature range of 2500-
10K. Press the SELECT switch to
enter AUTO set mode. Use the
S T D
S HAR P N E S S M I D
WH I T E - B A L AU TO : 0 0
N E X T
E X I T CANC E L D E F AU L T
SELECT switches to adjust the shift
value of the convergence point.
When data becomes big in the positive side, a convergence point is altered in
the red side. When data becomes big in the negative side, a convergence point is
altered in the blue side.
MANUAL : Press the SELECT switch to enter the MANUAL SETTINGS. Use the
SELECT switches to adjust R Gain (Red) and B Gain (Blue) until the desired
white balance is reached. Press SELECT to exit the manual settings.
INDOOR1 : Optimum setting for the white balance when the color temperature is 3000K
indoors with an incandescent lamp.
INDOOR2 : Optimum setting for the white balance when the color temperature is 4000K
indoors with a fluorescent lamp.
OUTDOOR: Optimum setting for the white balance when the color temperature is 5200K
in an outside environment.
NOTES
• If the optimum white balance cannot be obtained, then try to set AWB-RNG
to WIDE. (Refer to 8.3 (11).)
(8) ID. = Camera ID.
Refer to 8.2 (6).
(9) ID. POS = Camera ID. Position
Refer to 8.2 (7).
19
(10) PTN-GEN = Test pattern generator
Move the cursor to the position shown in fig.
I D
. . . . . . . . . . . . . . . . . . . .
Use the ꢀ ꢁ SELECT switches to select OFF,
COLOR, STEP, GRID, MULTI.
I D -
O F F
O F F
S T D
LOW
O F F
P O S
P T N
- GE N
AWB -
DNR
RNG
OFF
: Test pattern is not displayed.
COLOR : Color bar signal is displayed.
H I - R E S O
STEP
GRID
: Gray step signal is displayed.
: Grid pattern signal is displayed.
B ACK
MULTI : A simple multi-burst signal is out-
put.
E X I T CANC E L D E F AU L T
COLOR
STEP
GRID
MULTI
NOTE
• The accuracy of the signal is not guaranteed.
• To check the system operation etc., use a standard signal source.
(11) AWB-RNG = AWB control range
Move the cursor to the position shown in fig.
Use the st ꢀ ꢁ SELECT switches to select
STD or WIDE in the AWB-RNG setting.
Set the color temperature tracking range of
the white balance auto mode.
I D
. . . . . . . . . . . . . . . . . . . .
I D -
O F F
O F F
S T D
LOW
O F F
P O S
P T N
- GE N
AWB -
DNR
RNG
STD
:
The camera is applicable to a color
tempera true range of 2500-10k
Wider than the STD settings.
H I - R E S O
WIDE :
B ACK
E X I T CANC E L D E F AU L T
NOTE
• When switching from WIDE to STD setting, turn off and on the camera to
clear the setting.
20
(12) DNR = Digital noise reduction
Move the cursor to the position shown in fig.
Use the ꢀ ꢁ SELECT switches to select LOW,
HIGH, SUPER.
I D
. . . . . . . . . . . . . . . . . . . .
I D - P O S
P T N - GE N
AWB - RNG
DNR
O F F
O F F
S T D
LOW
O F F
LOW
HIGH
: Standard position.
: Increase the effect of DNR.
SUPER : Further increase the effect of DNR.
H I - R E S O
NOTE
B ACK
• If you set HIGH or SUPER the noise
reduction effect is reduced but an
after-image is produced if a moving
subject is shot.
E X I T CANC E L D E F AU L T
(13) HI-RESO = Hi resolution
Move the cursor to the position shown in fig.
Use the ꢀ ꢁ SELECT switches to select OFF
or ON in the HI-RESO setting.
I D
. . . . . . . . . . . . . . . . . . . .
I D - P O S
P T N - GE N
AWB - RNG
DNR
O F F
O F F
S T D
LOW
O F F
OFF : Standard position.
Resolution of horizontal is 480TV lines
or more.
ON : Hi resolution function is activated.
Resolution of horizontal is 520 TV
lines.
H I - R E S O
B ACK
E X I T CANC E L D E F AU L T
NOTE
• If you set HI-RESO to ON, the image signal resolution is increased, but de-
pending on the subject, noise may be increased.
21
(14) NEXT, BACK
Move the cursor to the position in fig.
Press the SELECT switch, to select the last
page or next page.
S HU T T E R
WDR
D / N : M I D
ON
A L C
L E V : 0 0
AU TO
B L C
GA I N
S T D
S HAR P N E S S M I D
WH I T E - B A L AU TO : 0 0
N E X T
E X I T CANC E L D E F AU L T
I D
. . . . . . . . . . . . . . . . . . . .
I D - P O S
P T N - GE N
AWB - RNG
DNR
O F F
O F F
S T D
LOW
O F F
H I - R E S O
B ACK
E X I T CANC E L D E F AU L T
(15) CANCEL
Move the cursor to the position in fig.
Press the SELECT switch to exit the menu
without saving any changes.
S HU T T E R
WDR
D / N : M I D
ON
A L C
L E V : 0 0
AU TO
B L C
GA I N
S T D
S HAR P N E S S M I D
WH I T E - B A L AU TO : 0 0
N E X T
E X I T CANC E L D E F AU L T
22
(16) EXIT
Move the cursor to the position in fig.
Press the SELECT switch when SAVE ALL
SETTINGS is displayed to save all changes
and exit the menu.
S HU T T E R
WDR
D / N : M I D
ON
A L C
L E V : 0 0
AU TO
B L C
GA I N
S T D
S HAR P N E S S M I D
WH I T E - B A L AU TO : 0 0
N E X T
E X I T CANC E L D E F AU L T
(17) DEFAULT
Move the cursor to the position in Fig.
Press the SELECT switch to select DEFAULT,
which returns the camera to its factory set-
tings.
S HU T T E R
WDR
D / N : M I D
ON
A L C
L E V : 0 0
AU TO
B L C
GA I N
S T D
S HAR P N E S S M I D
Default settings
WH I T E - B A L AU TO : 0 0
S HU T T E R
WDR
D / N : M I D
ON
N E X T
E X I T CANC E L D E F AU L T
A L C
L E V : 0 0
AU TO
B L C
GA I N
S T D
S HAR P N E S S M I D
WH I T E - B A L AU TO : 0 0
I D
. . . . . . . . . . . . . . . . . . . .
I D - P O S
P T N - GE N
AWB - RNG
DNR
O F F
O F F
S T D
LOW
O F F
H I - R E S O
23
8.4 On Screen RS422 setting menu (FOR REMOTE CONTROL)
The camera is adjusted using a sub menu for setup using a remote control.
Press and hold the
switch on the side of the camera body 2 seconds until the menu
appears on the monitor. The blinking area represents the option to be set.
(This sub menu cannot control from a keyboard by RS-422)
Default settings
ADDR E S S
P ROTOCOL
B I T - RA T E
0 0 1
TO S H I B A - P
4 8 0 0
(1) ADDRESS
Move the cursor to the position in Fig.
ADDR E S S
0 0 1
Use the SELECT
to 255.
In RS-422 control, it is necessary to set a
unique camera address for each camera.
switches to select 001
P ROTOCOL TO S H I B A - P
B I T - RA T E 4 8 0 0
V E R S I ON
* * * *
E X I T D E F AU L T
(2) PROTOCOL
Move the cursor to the position in Fig.
ADDR E S S
0 0 1
Use the SELECT switches to select
TOSHIBA-P, TOSHIBA-D.
P ROTOCOL TO S H I B A - P
B I T - RA T E 4 8 0 0
V E R S I ON
* * * *
E X I T D E F AU L T
(3) BIT-RATE
Move the cursor to the position in Fig.
ADDR E S S
0 0 1
P ROTOCOL TO S H I B A - P
B I T - RA T E 4 8 0 0
Use the SELECT switches to select 1200,
2400, 4800, 9600bps.
In RS-422 control, the bit rate for each cam-
era should match the controller or keyboard.
E X I T D E F AU L T
(4) VERSION
Software version display.
24
9.REMOTE CONTROL :
RS-422 Control (Factory-setting) supported TOSHIBA-P and TOSHIBA-D.
Rx Rx G
Twisted pair line
Camera
terminal
Rx-
Tx-
Tx+
2 wires
Control
Rx+
Tx of the communication line from KBD is connected to Rx of the camera, and Tx-is con-
nected to Rx-of the camera.
A controllable function is as follows.
Preset Number / Key Function
↑ (TILT) Valid when the OSD menu is displayed
→ (PAN) Valid when the OSD menu is displayed
↓ (TILT) Valid when the OSD menu is displayed
← (PAN) Valid when the OSD menu is displayed
Function
The same operation as when a ꢀ
button has been pressed
The same operation as when a ꢁ
button has been pressed
The same operation as when a ꢁ
button has been pressed
The same operation as when a ꢀ
button has been pressed
The same operation as when a
SELECT button has been pressed
Valid when the OSD menu is displayed
IRIS Open
Valid when the OSD menu is not displayed ALC setting +1
IRIS Close Valid when the OSD menu is not displayed
ALC setting -1
71 GO
72 GO
75 GO
Backlight compensation AUTO
Backlight compensation OFF
Software version display
SHUTTER NO-D/N
88 GO
89 GO
8 7 GO
95 SET
Valid during ADVANCED mode
Valid during ADVANCED mode
Valid during ADVANCED mode
SHUTTER D/N
SHUTTER S..D/N
Enter MENU mode
25
10.
NOTES ON USE AND INSTALLATION :
• Do not aim the camera at the sun
Do not aim the camera at the sun or point it at sun even if you are not shooting.
• Do not shoot intense light
Intense light such as a spotlight may cause a bloom or smear. A vertical stripe may
appear on the screen. However, this is not a malfunction.
• Treat the camera with care
Do not drop the camera or subject it to strong shock of vibration. Otherwise, the
camera may malfunction.
• Never touth internal parts
Do not touch the internal parts of the camera other than the parts specified.
Otherwise, the camera may malfunction.
• Do not splash water on the camera
Install the camera where the camera can be kept dry. If the camera gets wet, turn off
the power and contact your dealer.
• Install the camera
Where no video noise appears.
If cables are wired near electric lighting wires or a TV set, noise may appear in
images. In this event, relocate cables or reinstall equipment.
• Check the ambient temperature and humidity
Avoid using the camera where the temperature is hotter or colder than specified.
Otherwise, the quality of images may deteriorate or internal parts may be affected.
Special care is required to use the camera at high temperature and humidity.
• Should you notice any trouble
If any trouble occurs while you are using the camera, turn off the power and con-
tact your dealer. If you continue to use the camera when there is something wrong
with it, the trouble may much worse and an unpredictable accident may occur.
26
11.
IN CASE OF PROBLEMS :
Condition
Check Points
• Are the camera and connected equipment turned on?
• Is the iris of the lens adjusted properly?
• Are cables connected correctly?
No image
• Is the monitor TV adjusted correctly?
• Is the lighting too weak?
Unnatural color
Press default to return the camera to factory settings (8.2.(10))
27
12.
SPECIFICATIONS :
Power
AC 24V ~ 10% 60Hz/DC 12V
6.0W with AI lens
10%
Power consumption
Image sensor
1/3 inch CCD image area sensor
Image pickup area
5.59mm (0.220inch) horizontal x 4.68mm
(0.184inch) vertical (1/3inch type)
Effective picture element
Scanning system
Scanning frequency
Synchronization
Resolution
768 horizontal x 494 vertical
2 : 1 interlace NTSC Standard TV system
15.75kHz horizontal 60Hz vertical
Line-Lock, Internal manually switchable
Horizontal 520 TV lines or more
Vertical 350 TV lines or more (WDR OFF, HI-RESO ON)
Horizontal 520 TV lines
Vertical 260 TV lines or more (WDR ON, HI-RESO ON,
slow shutter)
Minimum illuminance of subject
S/N
0.1 Lux (F1.2, AGC HIGH, More than 10% of image
output γ=0.45)
0.001 Lux (F1.2, x 128, AGC HIGH, More than 10% of
image output γ=0.45)
53dB or more (AGC OFF, WDR OFF, weight ON)
50dB or more (AGC OFF, WDR ON, weight ON)
Video output
VBS 1.0V p-p/75 ohms, composite
Output impedance
White balance
75Ω unbalanced
AUTO (2500K to 10,000K), MANUAL, INDOOR1,
INDOOR2, OUTDOOR
IRIS control
DC Iris Driver Circuit Built in
Average AGC-STD (24dB), HIGH (30dB)
6 mode BLC function
Gain control
Backlight compensation
Dynamic range
Wide dynamic range function
CS mount
Lens mount
Ambient temperature
Ambient humidity
Weight
-10˚C to +50˚C (14˚F to 122˚F)
30% to 90%
500g
External dimensions
Automatic electronic shutter
Sens-up limit (slow shutter)
2.74(W) x 1.97(H) x 4.56(D) inches (63x50x116mm)
ON (1/60s to 1/100000)/OFF (1/60s)
OFF/x2, x4, x8, x16, x32, x64, x128
28
13.
EXTERIOR VIEW :
29
30
Memo
31
|