Torus Power Riding Toy rm 25 power conditioner User Manual

Owner’s Manual  
Power Conditioners  
Audio / Video Power Isolation Units  
Rack Mount / Standalone  
Model Number  
RM 2.5  
Description  
Single 2.5A  
Input  
120V  
Output  
Connector  
4 outlets  
Medical-grade  
 
Description  
Torus Power PIUs (Power Isolation Units) combine the best  
surge suppression with unique toroidal transformer  
technologies from PLITRON to provide the ultimate in AC  
power conditioning and protection for sensitive audio and  
video equipment applications.  
using a highly efficient Faraday screen.  
Low-impedance output provides the most unconstrained, yet  
protected, energy source available to your equipment.  
PIUs use ZeroSurgeâ patented series-mode surge removal  
filters to absorb dangerous voltage surges and safely dissipate  
them without using failure-prone MOVs (metal oxide  
varistors). Also, unlike MOV-based protection, voltage surges  
are not shunted to ground.  
Isolation is combined with proven proprietary technologies  
from PLITRON in the over-sized toroidal transformer. NBT  
works as  
a
low pass filter using the controlled leakage  
inductance and capacitances within the transformer to  
effectively reduce noise. LoNo technology has been used for  
years by high-end audio companies who demand silent  
transformers. UST provides additional common mode filtering  
Shipping Carton & Packing Material  
Placement & Ventilation  
Please keep the original shipping box and all packing material.  
This will ensure the PIU is protected in future transport.  
Torus Power PIUs are extremely efficient devices, however,  
they are also very high-power devices, and must be  
adequately cooled.  
In the unlikely event you have a problem and must return it for  
service you must use the proper packing material.  
PIUs have ventilation slots on the base, and the cover.  
Maintain at least 1” distance from each of these surfaces to  
anything else. Should your installation conditions be  
constricted, additional forced air-cooling may be necessary.  
Ship the PIU only in the original packing material, as the unit is  
not insurable by carriers otherwise.  
Do not install the PIU directly above heat-generating  
equipment.  
Maintain at least 6” behind the PIU for adequate wiring space.  
10/07  
Owner’s Manual  
Power Conditioners  
Audio / Video Power Isolation Units  
Rack Mount / Standalone  
 
Front Panel Layout  
Circuit Protection  
Illuminated Power Switch / Circuit Breaker  
The front panel power switch is also  
a circuit breaker. As a circuit breaker,  
it prevents excessive current from  
entering the PIU.  
When the power is on, the switch is  
illuminated. When the breaker trips,  
the switch returns to its “off”  
position.  
Thermal Protection  
Torus PIUs will shut-down if internal  
unit temperature reaches excessive  
levels.  
Rear Panel Layout  
Accessory  
Ground Stud  
Wall Receptacles  
Torus PIUs are high-power products.  
The outlets they are plugged into  
should be sufficient to provide the  
current to operate them without  
tripping circuit breakers within your  
junction panel.  
Model Number RM 2.5  
Input 120VAC 60Hz, 2.5A max  
Output 120V 2.5A max  
Part Number PA-10201-00  
Serial Number 0001  
WARNING  
DISCONNECT POWER  
BEFORE WORKING WITHIN  
Power Inlet  
Product Label  
Warning Label  
Power Outlet  
Removable Mounting  
Feet for Rack Mount  
Electrical Specifications  
Model Number  
Input Voltage  
Input  
Input Current  
Rating  
Load Current Capability  
Nominal  
Current  
Limiting  
2.5A  
½ cycle  
1 second 10 seconds  
RM 2.5  
120VAC, 60Hz  
Range +/- 10% voltage  
57-63Hz  
2.5A  
25A  
20A  
7.5A  
Circuit Breaker  
Front Panel  
Mechanical Specifications  
Model Number  
Input  
Line Cord  
Suggested  
Output  
Weight  
Size  
Connector  
(Rear Panel)  
IEC 15A  
(included)  
Wall  
Connector  
(w” x d” x h”)  
Receptacle  
Standard outlet  
NEMA 5-15R  
15A - 125V  
(Rear Panel)  
Qty 2 (4 outlets)  
Medical-grade  
RM 2.5  
N5/15, 14AWG  
C13, 15A/125V  
17 lbs.  
19.0 x 11.0 x 2.0  
Inlet  
With mounting feet  
19.0 x 11.0 x 1.75  
Without mounting feet  
10/07  
Owner’s Manual  
Power Conditioners  
Audio / Video Power Isolation Units  
Rack Mount / Standalone  
 
Line Cords  
Standard 15A 120V  
Equipment end: IEC C13  
Plug: 5-15P, Straight Blade, 2 pole,  
3-wire grounding, 15A 125V  
Cord: 3 x 14AWG  
Length: 2.5 m  
Warranty  
Torus Power products are warranted to be free from  
manufacturing defects for a minimum of five years from the  
original date of sale. This includes parts, labour and return  
shipping to the first registered owner and all subsequent  
registered owners. Warranty coverage is extended to  
applicable products registered or having proof-of-purchase  
(sales invoice, etc.).  
In the event of a defect or malfunction, Torus Power will  
remedy the problem by repair or replacement, as we deem  
necessary, to restore the product to full performance.  
This warranty is considered void if the defect, malfunction or  
failure of the product or any component part was caused by  
damage (not resulting from a defect or malfunction) or abuse  
while in the possession of the customer. Failure to fully comply  
with Torus Power operating instructions, voids the warranty.  
Torus Power  
PO Box 30030  
Toronto, ON M3J 3L6  
Canada  
Torus Power products are marketed  
worldwide through Bryston Limited.  
For sales contact  
416-667-8473  
Specifications subject to change without notice.  
© Torus Power 2007  
ZeroSurge is a registered trademark of Zero Surge Inc.  
10/07  
 

Toshiba Computer Drive MK3252GSX User Manual
TP Link Network Router TL WR740N User Manual
Transition Networks Plumbing Product SISTF10xx 141 LRT User Manual
TRENDnet Router trend COMBI 650 User Manual
Tripp Lite Surge Protector PDU1220T User Manual
Ultratec Network Card INTELE MODEM User Manual
Victor Technology Calculator 1100 2 User Manual
Wachsmuth Krogmann Food Warmer 7255 05 User Manual
Weed Eater Lawn Mower S165H42D User Manual
W Linx Technology Satellite Radio TXE 315 KH User Manual