Timex Watch 896 095000 User Manual

W-153-US 896-095000  
THANK YOU FOR PURCHASING YOUR TIMEX WATCH.  
EXTENDED WARRANTY  
Available in U.S. only. Extend your warranty for an additional 4 years from date of purchase  
for $5. You can pay with AMEX, Discover, Visa or MasterCard by calling 1 800-448-4639 during  
normal business hours. Payment must be made within 30 days of purchase. Name, address,  
telephone number, purchase date, and 5-digit model number required. You can also mail a  
check for $5 to: Timex Extended Warranty, P.O. Box 1676, Dept. EF, Little Rock, AR 72203.  
Please read instructions carefully to understand how to operate your Timex watch.  
Your m odel m ay not have all of the features described in this booklet.  
GENERAL OP ERATION-FEATURES  
INDIGLO button turns on the INDIGLO® night-light for  
three seconds.  
START/  
STOP  
MODE button cycles through Tim e of Day, Tim er,  
Chrono, Recall and Alarm modes.  
START/STOP button activates Timer and Chronograph,  
turns Alarm on/off, allows you to view day or month  
from Time display, and changes value of digits when  
setting different functions.  
INDIGLO  
MODE  
LAP/  
CLEAR/  
SET  
LAP/CLEAR/SET button sets digits for Time, Alarm, and  
Timer and records lap times in Chronograph mode.  
Features include:  
• Countdown timer with preset times to 1 hour and bargraph display of remaining time  
• Chronograph with lap storage • Alarm with 5-minute backup • 12- or 24-hour time format  
• Day-Date or Month-Date date format • Automatic Set Return displays Time of Day if no  
button is pushed for 2-3 minutes in Set function.  
S ETTING TIM E OF DAY, DATE AND ALARM  
Weve built setting reminders into the watch to simplify setting the Time of Day and Alarm, and  
made them consistent – once you know how to set Time, you can set the Alarm.  
Press and hold LAP/CLEAR/SET to begin; a message will appear reminding you to hold button.  
After 2 seconds, youll see a series of reminders, showing you functions of MODE and  
START/STOP buttons and a reminder to press LAP/CLEAR/SET button when done.  
Press START/STOP to change value of flashing number.  
Press MODE to move to next digit (or digits) to continue setting time and date.  
When done, press LAP/CLEAR/SET to save changes and exit.  
Notes on Setting Tim e of Day, Date and Alarm  
Pressing any key during reminder messages will cancel them and let you start setting the  
watch.  
During setting, the reminder arrows will pop-up to help you remember which buttons to press.  
You can set the watch to display time in 24-hour format, sometimes called military” or  
“internationaltime. Press START/STOP to change between 12 HR and 24 HR.  
You can set the date to display Month/Date or Day/Date. In regular Time mode (not Set  
mode), press and hold START/STOP for 3 seconds to change between Month/Date and  
Day/Date format.  
Whenever you set the Alarm, it will automatically arm itself. Refer to the Alarm section for  
more details.  
US ING THE TIM ER  
Press MODE until TIMER appears.  
Press LAP/CLEAR/SET to select pre-set countdown times (15 and 30 sec, 1, 3, 5, 10, 15, 20,  
25, 30, 45 min.; 1 hour). If set time is more than 30 minutes, a tone will sound at the half-  
way point.  
Press START/STOP to start or stop Timer.  
While Timer is stopped, press LAP/CLEAR/SET to set it to zero.  
When Timer count reaches zero, a melody will sound. Pressing any button stops it. A bar-  
graph of time remaining in countdown appears in the Time display whenever the Timer is  
running.  
US ING THE CHRONOGRAP H  
Press MODE until CHR appears.  
Press START/STOP to begin running Chrono, press again to stop or pause. Chrono continues  
to run even if you exit the mode.  
To take a lap, while Chrono is running, press LAP/CLEAR/SET. Lap time will appear frozen  
for 10 seconds. Chrono will then return to overall running time.  
To clear Chrono to zero, with Chrono stopped, press and hold LAP/CLEAR/SET for  
3 seconds.  
RECALLING S TORED LAP S  
Press MODE until RCL appears.  
Total workout time will be displayed.  
Press START/STOP to scroll through stored laps.  
Stored laps will be cleared when Chrono is reset and started again.  
US ING THE ALARM  
Press MODE until ALARM appears.  
Press LAP/CLEAR/SET to begin setting . Instructions for setting Alarm can be found above  
in “Setting the Time of Day, Date and Alarm”.  
In regular Alarm mode (not Set mode), press START/STOP to turn Alarm feature on and off.  
Display will show “ON” or “OFF” to right of Alarm minutes. If Alarm is “ON”, it will generate  
a melody when Time of Day is the same as the Alarm time. As a reminder, when the Alarm  
is ON, an Alarm clock symbol will appear to the left of the date while in Tim e of Day.  
Alarm melody will sound for 20 seconds, but can be stopped by pressing any button. If it is  
allowed to sound for the full 20 seconds, a backup alarm will automatically sound after 5  
more minutes, much like a snooze feature.  
 

Technicolor Thomson Network Card 8900NET User Manual
Thule Automobile Accessories 974 91974 User Manual
Trane Thermostat TCONT900AC43UA User Manual
Triarch Indoor Furnishings 31061 User Manual
Tripp Lite TV Cables EZB 100 User Manual
Tunturi Home Gym F2OO User Manual
Verbatim Network Card Pretec User Manual
Vermont Casting Ventilation Hood DVBR36 User Manual
Walker Lawn Mower MC36 54 User Manual
Weber Gas Grill 42097 User Manual