Telex Video Game Headset H 51 User Manual

User Manual  
Headsets and microphones for PC voice applications  
Congratulations!  
You have just selected a Telex headset/microphone for PC voice  
applications. This product will give you consistently clear audio input for  
PC applications like speech recognition, voice command and control,  
Internet phone and chat, videoconferencing and speakerphone.  
H-351  
H-341  
H-51  
M-60  
M-30  
M-20  
M-40  
 
Special considerations for speech dictation applications:  
When upgrading to a new microphone for speech recognition applications,  
always create a new user file. For large vocabulary dictation systems, this usually  
involves running the application’s Audio Setup Wizard to adjust the volume, and  
going through a new enrollment process to train the system for the new acoustic  
properties of the microphone.  
It is very important to position the microphone properly for best performance on  
speech dictation systems. Please follow these positioning guidelines when using  
Telex microphones and headsets for speech dictation.  
For Telex headsets with noise canceling microphones:  
Position the microphone ¼” to ½” from your lips, off the corner of your mouth.  
Be sure that the microphone is out of the way from any air blasts from your nose  
or mouth when speaking. Use the microphone wind screen for best performance.  
For M-60 Super-Directional Desktop Microphone:  
Position the microphone on your desktop about 12” to 24” from your lips and  
point it directly at your mouth. Adjust the distance from your mouth depending  
on the noise level in your environment. For louder environments, position the  
microphone at 12”. For quiet environments, position the microphone at 18-24”.  
The M-60 uses a highly directional pick up pattern to enhance voice input and  
cancel background noises. Small, closed rooms (under 64 sq. ft.) with hard walls  
and floors can adversely affect the performance of far-field, directional  
microphone structures like the M-60. This can be particularly evident if a hard  
wall is located directly behind the talker, enabling noise to be reflected directly  
into the front of the microphone at the same angle as your voice. Try to position  
the microphone so that it points away from noise sources and reflective walls.  
Safety  
For the safety of you and your equipment, always follow these precautions:  
Keep your headset or microphone away from heat sources, such as radiators,  
heat registers and other similar appliances.  
Keep your headset or microphone away from liquids.  
Protect your headset or microphone from dampness.  
Not recommended for small children. Children may choke through entanglement.  
May also contain small parts.  
 
Troubleshooting  
Microphone does not record sound when connected to PC  
Check all Connections.  
Check the Microphone Volume Settings  
Windows 95  
1. Go to: Start, Programs,Accessories, Multimedia, Volume Control, Options,  
Properties.  
2. Select Properties for Recording and select Microphone.  
3. Adjust the volume slider to the appropriate level. Be sure that Select is  
checked or Mute is unchecked.  
4. Go to: Start, Programs,Accessories, Multimedia, Sound Recorder to test  
microphone.  
Windows 98  
1. Go to: Start, Programs,Accessories, Entertainment, Volume Control,  
Options, Properties.  
2. Select Properties for Recording and select Microphone.  
3. Adjust the volume slider to the appropriate level. Be sure that Select is  
checked or Mute is unchecked.  
4. Go to: Start, Programs,Accessories, Entertainment, Sound Recorder to test  
microphone.  
Windows Me & 2000  
1. Go to: Start, Programs,Accessories, Entertainment, Volume Control,  
Options, Properties.  
2. Select Properties for Recording and select Microphone.  
3. Adjust the volume slider to the appropriate level. Be sure that Select is  
checked or Mute is unchecked.  
4. Go to: Start, Programs,Accessories, Entertainment, Sound Recorder to test  
microphone.  
Windows XP  
1. Go to: Start,All Programs,Accessories, Entertainment, Volume Control,  
Options, Properties.  
2. Select Properties for Recording and select Microphone.  
3. Adjust the volume slider to the appropriate level. Be sure that Select is  
checked or Mute is unchecked.  
4. Go to: Start, Programs,Accessories, Entertainment, Sound Recorder to test  
microphone.  
Customer Service and Tech Support  
Phone: 800-328-3771  
© Telex Communications, Inc. All rights reserved. Telex is a trademark of Telex Communications, Inc. All other  
names are trademarks, registered trademarks, or service marks of their resperctive companies.  
38109-780 Rev E  
10/01  
 

Tech Craft Indoor Furnishings FPD44B User Manual
Technics Stereo Receiver SA EX100 User Manual
Telenetics Network Card DSP9612RM User Manual
Transition Networks Switch SISTP10XX 141 LRT User Manual
Traulsen Refrigerator RHT132WPUT FHG User Manual
True Fitness Treadmill PS75 User Manual
Uniden Cordless Telephone XC631Plus User Manual
Vizio Computer Hardware PCG 808 User Manual
VXI Headphones Passport 37 User Manual
Wachsmuth Krogmann Air Compressor TAW 2030 User Manual