Tekkeon Network Card ET7000 User Manual

Bluetooth Gateway for  
iPod and MP3 Players  
ET7000  
User Guide  
For Bluetooth®  
Mobile Phones  
 
USER GUIDE  
Contents  
Overview ... ..... .. .. . . .. .. . . . . .. .. . ..................... ... . .. .. .. .. .. .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Getting Started... ... .. .. . . . . .. .. . . . . .. .. . ................ . ... . ... . .. .. .. .. .. .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Unpacking myTalker ........................................................ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Getting to Know myTalker ..................................................... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
Setting Up myTalker. .. .. . .. .. . . . . .. .. . . . . .. .. . ........ . ... . ... . ... . ... . .. .. .. .. .. .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Charging myTalker ........................................................ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Pairing myTalker to Your Mobile Phone.............................................. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Connecting myTalker ....................................................... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Using myTalker ... .. . .. .. . . . . .. .. . . . . .. .. . .............. . ... . ... . ... . .. .. .. .. .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Powering myTalker........................................................ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Making Calls........................................................... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Receiving Calls......................................................... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Ending Calls ........................................................... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Transferring Calls........................................................ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Adjusting the Volume ....................................................... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Muting myTalker......................................................... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Advanced Calling Features. .. .. . .. .. . . . . .. .. . . . . .. .. . . ... . ... . ... . ... . ... . ... . .. .. .. .. .. .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Call Hold ............................................................ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Call Waiting........................................................... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Conference ............................................................ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Visual and Audible Indicators . .. .. . .. .. . . . . .. .. . . . . . .. . . . ... . ... . ... . ... . ... . ... . .. .. .. .. .. .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Troubleshooting ... .. . .. .. . . . . .. .. . . . . .. .. . ............. ... . ... . ... . .. .. .. .. .. .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Limited Warranty .. . .. . .. .. . . . . .. .. . . . . .. .. . ........... ... . ... . ... . ... . .. .. .. .. .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Disclaimer of Warranties ..................................................... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
FCC Statement... ... .. .. . . . . .. .. . . . . .. .. . ................ . ... . ... . .. .. .. .. .. .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
 
Customer Support.. . .. . .. .. . . . . .. .. . . . . .. .. . ............ . ... . ... . ... . .. .. .. .. .. .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Overview  
myTalkerby Tekkeon is a Bluetooth gateway that enables you to make and  
receive calls from/to your mobile phone while you’re listening to your iPod or  
MP3 player. myTalker connects between your iPod or MP3 player and the music  
headsets, so you don’t need to remove your music headsets to take the call.  
myTalker supports advanced calling features, like last number redial and voice  
dialing, so you don’t need immediate access to your mobile phone. In fact, you  
can store your mobile phone in your pocket, backpack, or briefcase—just about  
anywhere in close proximity that is convenient for you.  
myTalker is compatible with all Bluetooth v1.1 and v1.2 mobile phones, and  
any iPod or MP3 player with a standard 3.5mm audio jack.  
Getting Started  
Unpacking myTalker  
Your myTalker package includes:  
myTalker  
USB Charging Cable  
2
 
Getting to Know myTalker  
Microphone  
Audio Jack  
Volume Control  
Mute  
Add Caller  
Power  
Talk  
Lock/Unlock  
USB Power Jack  
3
USER GUIDE  
 
Setting Up myTalker  
Before using myTalker, you must:  
• Charge myTalker  
• Pair myTalker to your mobile phone  
• Connect myTalker to your iPod or MP3 player  
Directions for each of these activities are provided in the following three sections.  
Once these steps are completed, you will be ready to use myTalker!  
Charging myTalker  
You must charge myTalker for approximately two hours. When fully charged, the  
battery provides up to five hours of talk time and up to 120 hours of standby time.  
To Charge myTalker  
1. Connect the small end of the USB cable into the USB port on myTalker.  
2. Connect the opposite end of the USB cable into the  
USB port on your computer or into an optional USB  
power adapter, which in turns plugs into a wall outlet.  
While myTalker is charging, the amber LED will  
remain on until fully charged.  
3. When the amber light turns off, unplug the USB cable.  
4
 
NOTE: When the battery is low (less than 10% capacity), the amber LED will flash.  
Pairing myTalker to Your Mobile Phone  
Pairing is the process of linking a Bluetooth headset/gateway with your Bluetooth  
mobile phone. Before using myTalker with your mobile phone you must pair the  
devices. After this process is complete, you can use myTalker with your paired  
mobile phone.  
You can pair myTalker with up to seven Bluetooth devices. Once each device is  
paired with myTalker, you must disconnect the paired phone or device to connect  
to a different phone or device. While connected to a different paired device,  
myTalker will not be connected to other paired devices.  
BEFORE YOU PAIR MYTALKER, ENSURE THAT THE BATTERY IS FULLY  
CHARGED, AND REVIEW THE INSTRUCTIONS IN YOUR MOBILE PHONE USER  
GUIDE FOR PAIRING YOUR MOBILE PHONE TO A BLUETOOTH HEADSET.  
5
USER GUIDE  
 
To Pair the Devices  
1. Turn on the mobile phone and place it next to myTalker.  
2. Initiate the Bluetooth device pairing (discovery) feature on the mobile phone.  
Refer to the mobile phone user guide for instructions on initiating this feature.  
3. With myTalker turned off, press and hold the POWER button until the blue and  
amber LEDs flash alternately or until you hear Pairing tone (approximately five  
seconds).  
4. Release the POWER button. myTalker is now in Pairing Mode.  
5. When the mobile phone discovers myTalker, it will identify myTalker as BTHS  
Music. Follow the mobile phone prompts and enter 0000 (myTalker passkey)  
when prompted for the passkey (also called passcode or BT PIN). When pairing  
is complete, myTalker will be placed in standby mode, ready to make and receive  
calls, the amber LED will turn off, and the blue LED will flash at two-second  
intervals.  
To Cancel Pairing Mode  
While you are in pairing mode, you can cancel the pairing process and turn off  
myTalker.  
1. While in pairing mode, press and hold the POWER button until both LEDs turn  
off or you hear the Off tone (approximately three seconds).  
6
 
To Connect to a Paired Device  
1. Follow the menu on the paired device to connect to myTalker. You must be  
disconnected from all other paired devices with which myTalker is currently  
connected.  
To Disconnect from a Paired Device  
1. With myTalker connected to a paired device, follow the menu on the device to  
disconnect from myTalker.  
Connecting myTalker  
myTalker connects between your iPod or MP3 player, and your music  
headphones.  
To Connect myTalker  
1. Connect the audio plug on myTalker into the audio  
(headphones) jack on your iPod or MP3 player.  
Audio  
plug  
2. Connect your iPod or MP3 headset into the audio  
jack on the top of myTalker.  
3. Clip myTalker to your shirt on the upper part of  
your chest.  
7
USER GUIDE  
 
Using myTalker  
Powering myTalker  
To Turn On myTalker  
1. Press and hold the POWER button until the blue LED flashes or until you hear  
the On tone (approximately four seconds). myTalker turns on and is placed in  
standby mode, ready to make and receive calls. The blue LED will flash at  
two-second intervals.  
To Turn Off myTalker  
1. Press and hold the POWER button until the blue LED flashes four times quickly  
or until you hear the Off tone (approximately four seconds).  
Making Calls  
You can make calls from your mobile phone, or directly from myTalker using the  
last number redial feature or voice dialing commands (if these features are  
supported by your mobile phone).  
To Make Calls from Your Mobile Phone  
1. Dial the number from your mobile phone. The call is automatically connected to  
myTalker.  
8
 
To Make Calls Using Last Number Redial (if supported by your mobile phone)  
1. Press and hold the myTalker TALK button. The last number called from your  
mobile phone will be redialed. You will continue to hear your iPod or MP3 player  
until the call begins to ring.  
To Make Calls Using Voice Dialing (if supported by your mobile phone)  
1. Press the myTalker TALK button. You will hear two beeps.  
2. When prompted by the mobile phone (between one to five seconds depending  
on the phone), speak the name of the person you wish to call. The call is  
automatically connected to myTalker.  
TIP: In a noisy environment, you should dial the number from the mobile phone  
keypad as the loud background noise may interfere with voice commands.  
Receiving Calls  
When you receive a call on your mobile phone, you will hear the mobile phone  
ring before you hear a beep through your headphones as there is a small delay  
while the connected phone sends the incoming call to myTalker. If you do not  
wish to answer the call, you can reject the call and send the caller to voice mail  
(if available). While an incoming call is ringing on myTalker, and during your call,  
the music will be muted. Push pause on your iPod or MP3 player if you wish to  
pause the music.  
9
USER GUIDE  
 
If the Call Waiting feature is supported by your phone, you can answer an  
incoming call while you are connected on another call. In this case, the connected  
call is placed on hold and the incoming call is connected. While both calls are  
connected, you can toggle between the calls.  
To Receive a Call  
1. When you hear a beep through your headphones, press the TALK button. The  
call is automatically connected to myTalker.  
To Reject an Incoming Call (if supported by your mobile phone)  
1. When you hear a beep through your headset, press the POWER button to reject  
the call. You will hear a series of beeps, and the call will be diverted to your  
designated answer point.  
Ending Calls  
1. When you have finished your call, press the POWER button. The call will be  
disconnected.  
Transferring Calls  
You can transfer calls from your mobile phone to myTalker, and from myTalker to  
your mobile phone.  
10  
 
To Transfer Calls from Your Mobile Phone to myTalker  
1. With the call connected to your mobile phone, press the myTalker TALK button.  
The call will be connected to myTalker.  
To Transfer Calls from myTalker to Your Mobile Phone (if supported by  
your phone)  
1. With the call connected to myTalker, press the myTalker TALK button. The call  
will be connected to your mobile phone.  
Adjusting the Volume  
The volume of the connected call can be adjusted using the volume controls on  
myTalker or your mobile phone.  
To Increase the Volume  
1. Press and release the VOLUME button.  
+
To Decrease the Volume  
1. Press and release the VOLUME - button.  
11  
USER GUIDE  
 
Muting myTalker  
You can mute and unmute the microphone temporarily so that you cannot be  
heard by the connected party.  
To Mute myTalker  
1. With a call connected to myTalker, press the MUTE button. You will hear a soft  
beep.  
To Unmute myTalker  
1. When the microphone is muted, press the MUTE button.  
Advanced Calling Features  
You can use myTalker to place a call on hold, answer a call waiting call, and initiate  
a three-way conference with two other callers, if these features are supported by  
your Bluetooth mobile phone.  
Call Hold  
To Place a Call on Hold  
1. With a call connected to myTalker, press the ADD CALLER button until you hear  
a short beep followed by a long tone (approximately 3 seconds). The call will be  
placed on hold, which will be indicated on your mobile phone.  
12  
 
Call Waiting  
To Answer a Call Waiting Call (if supported by your mobile phone)  
1. When you hear two beeps while connected on a call, press the ADD CALLER  
button. The original call will be placed on hold and the new call be will be  
connected. Your phone will display the incoming and connected calls.  
2. While connected on a call, press the ADD CALLER button to toggle between the  
two connected calls.  
3. Press the POWER button to end a connected call. You will be reconnected to the  
other call.  
Conference  
To Initiate a Conference Call (if supported by your mobile phone)  
1. With two calls connected, press and hold the ADD CALLER button for six  
seconds. Both calls will be connected on a conference call. Your phone will  
display the incoming and connected calls.  
2. To end the conference, press the POWER button. Both connected calls will be  
disconnected.  
NOTE: For some mobile phones, you must configure the phone to answer calls  
directly on your Bluetooth headset. Refer to the mobile phone user guide for  
instructions for initiating this feature.  
13  
USER GUIDE  
 
Visual and Audible Indicators  
Visual Indicators  
LED Status  
Indicates  
Blue LED flashes at two-second intervals  
myTalker is in standby mode, ready  
to make and receive calls.  
Blue and amber LEDs flash alternately  
Amber LED flashes every 32 seconds  
Both LEDs are off  
myTalker is in pairing mode.  
Battery is low.  
myTalker is off.  
Audible Indicators  
Tone  
Description  
Indicates  
On  
Double beep, increasing in pitch myTalker has been powered on.  
Off  
Double beep, decreasing in pitch myTalker is about to be powered  
off.  
Pairing  
Mute  
Double chime, followed by  
low beep  
myTalker has been put into pairing  
mode.  
Beeps every four seconds while  
a call is connected  
myTalker is muted.  
14  
 
Troubleshooting  
Issue  
Solution  
Verify that myTalker is placed in pairing mode (blue  
and amber LEDs are flashing alternately). If not, place  
myTalker in pairing mode.  
When you initiate the Bluetooth  
device pairing feature on your mobile  
phone, your phone cannot find  
myTalker.  
myTalker is not communicating with Ensure that myTalker is on and charged, and that you  
your mobile phone.  
have paired myTalker with your Bluetooth mobile  
phone. (myTalker will not work with any mobile phone  
that does not support Bluetooth wireless technology.)  
Verify that you have good reception on your mobile  
phone or move closer to your mobile phone. If the  
reception is still poor, try moving the mobile phone  
away from your body, or to the same side of your body  
as myTalker.  
You are encountering poor reception  
via myTalker.  
Ensure that your mobile phone supports this feature  
and is set to voice control mode. If your mobile  
phone supports voice dialing and you are in a noisy  
environment, dial the number from the mobile phone  
as the loud background noise may interfere with the  
voice commands.  
Your mobile phone does not accept  
voice commands when you are using  
myTalker.  
Ensure that your mobile phone supports this feature.  
Last number redial isn’t working.  
15  
USER GUIDE  
 
Troubleshooting  
Issue  
(continued)  
Solution  
Call reject isn’t working.  
Ensure that your mobile phone supports this feature.  
Ensure that your mobile phone supports this feature.  
Ensure that your mobile phone supports this feature.  
Call waiting isn’t working.  
You cannot transfer a call from  
myTalker to your mobile phone.  
1.Ensure that myTalker is charged and turned on.  
When you receive a call on your  
mobile phone, the call is not  
automatically connected to myTalker  
after you press the TALK button.  
2.Ensure that your Bluetooth mobile phone is set to  
Bluetooth mode, and that myTalker (BTHS Music)  
has been selected as the connected Bluetooth  
device. (This is important as most Bluetooth phones  
are designed to pair with more than one Bluetooth  
device.)  
3.This problem may persist in some rare cases, as the  
phone may be too busy to process the call and have  
difficulty establishing the connection with myTalker.  
If this is the case, answer the call on the mobile  
phone before pressing the TALK button on myTalker.  
The mobile phone should transfer the call to  
myTalker within one second.  
16  
 
Troubleshooting  
Issue  
(continued)  
Solution  
Even though myTalker is turned on,  
the call is not automatically connected  
to myTalker when you dial a number  
on your mobile phone.  
1.Ensure that your Bluetooth mobile phone is set to  
Bluetooth mode, and that myTalker (BTHS Music)  
has been selected as the connected Bluetooth  
device. (This is important as most Bluetooth  
phones are designed to pair with more than one  
Bluetooth device.)  
2.The problem may persist in some rare cases, as  
the phone may be too busy to process the call and  
have difficulty establishing the connection with  
myTalker. If this is the case, make a call from your  
mobile phone, and then press the TALK button on  
myTalker. The mobile phone should transfer the  
call to myTalker within one second.  
You hear a crackling noise when  
You have exceeded the 30 foot-range of the Bluetooth  
connected on a call through myTalker. connection. Move your mobile phone closer to  
myTalker.  
You hear a clicking noise when  
You are experiencing interference on the connection  
connected on a call through myTalker. between your mobile phone and myTalker. Try  
changing locations.  
17  
USER GUIDE  
 
Limited Warranty  
The product enclosed herein is warranted to be free of operational defects for a  
period of one year from the date of purchase. In the event of a defect in operation  
during the warranty period Tekkeon, Inc. will replace the defective product when  
the owner returns all product contents. The limited warranty will be considered  
void if the unit is tampered with, subject to misuse, negligence or accidental  
damage, has been improperly serviced, or if the security seal is removed. This  
warranty is limited to replacement only and shall not cover any other damages. Any  
product returned to Tekkeon, Inc. with no fault found will be returned to the owner  
at the owner’s expense.  
To obtain warranty coverage, please complete and submit the enclosed myTalker  
registration card.  
Disclaimer of Warranties  
Any user of this product does so at the user’s own risk. To the maximum extent  
permitted by applicable law, Tekkeon, Inc. and its suppliers provide the hardware  
and any support services related thereto “as is” and with all faults; and hereby  
disclaim all warranties and conditions, whether express, implied or statutory,  
including, but not limited to implied warranties of merchantability, fitness for a  
particular purpose, non-infringement, lack of negligence or correspondence to  
description, except for those warranties specifically and expressly provided in  
the Limited Warranty.  
18  
 
With respect to the use of this product, in no event shall the company be liable for  
any loss of profit or any other commercial damage, including but not limited to  
special, incidental, consequential and other damages.  
FCC Statement for Class B Digital Devices  
This equipment has been tested and found to comply with the limits for a Class B  
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to  
provide reasonable protection against harmful interference in a residential  
installation. This equipment generates, uses, and can radiate radio frequency  
energy and, if not installed and used in accordance with the instructions, may  
cause harmful interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular installation. If this  
equipment does cause harmful interference to radio or television reception, which  
can be determined by turning the equipment off and on, the user is encouraged to  
try and correct the interference by one or more of the following measures:  
• Reorient or locate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different from that to  
which the receiver is connected.  
• Consult the dealer or an experienced radio/TV technician for help.  
19  
USER GUIDE  
 
“Operation is subject to the following two conditions: (1) this device may not  
cause interference, and (2) this device must accept any interference, including  
interference that may cause undesired operation of the device.”  
Changes or modifications not expressly approved by the party responsible for  
compliance could void the user’s authority to operate this equipment.  
20  
 
Customer Support  
Customer support for myTalker is available at:  
Tekkeon, Inc.  
c/o myTalker  
3002 Dow Avenue, #134  
Tustin, CA 92780  
888-787-5888 / 714-832-1266  
Tekkeon, Inc. must issue a Return Merchandise Authorization (RMA) number for all  
exchanges or refunds.  
 
© 2005 Tekkeon, Inc.  
All Rights Reserved  
myTalkeris a trademark  
of Tekkeon, Inc.  
Rev B 01/06  
 

Telex Headphones Stratus 50 User Manual
Texas Instruments Stereo Amplifier TPA3001D1EVM User Manual
Toshiba DVR D R17DTKB User Manual
Toshiba Laptop A305 S6916 User Manual
Toshiba Power Supply TOSVERT VF S11 User Manual
Toshiba TV DVD Combo 17HLV85 User Manual
Tunturi Treadmill T90 Rehab User Manual
Verilux Electric Shaver CWST2RB User Manual
Victory Refrigeration Freezer FS 1D S7 EW User Manual
Vivotek Security Camera IP8130 User Manual