Function specifications
Video input
Units specifications
Video specifications
Visual Data Recorder
Input signal
NTSC ( Composite video 75ohm 1Vp-p )
function
Max Field rate
Number of cameras
60 fields per second
Video input
Video output
Picture data
handling
4ch, BNC NTSC VBS 1.0 Vp-p 75 ohm
Up to 4 cameras, Auto-skip absence channel.
When active cameras are 3 channels, ch-1 is recorded twice.
1ch -> 2ch -> 1ch -> 3ch
1ch, BNC NTSC VBS 1.0Vp-p +/-1.0% 75 ohm
Quantization frequency/bit : 13.5MHz/8bit
Video compression : Motion JPEG (Original)
AQ-VU
Indication
function
Video viewing
4 channels per screen or full screen viewing ( selected channels)
4 Selectable waveform or bar meter (overlay)
Date and time : Current time, Record Y/M/D H:M:S
Operation display : Operation status
Channels and
Video interval
CHs
Pixels
Recording interval (fields/sec)
Waveform/Bar meter
Character display
1
2
3
4
5
1
2
3
4
4
720 x 240
720 x 240
720 x 240
720 x 240
360 x 120
60
30
30/15
15
Channel number : Display/non-Display selectable (All channels)
Push REC button for REC standby, push FWD button to start recording
Trigger function record
Recording
mode
Start operation
Stop operation
Hard disk mode
Playback operation
60
Data specifications
Input
External signal (START/STOP)
4ch Sampling Frequencies 2kHz fix
Manual (Press STOP button)
Input ranges
Output
+/-1, +/-2, +/-5V
4ch
Trigger mode
External control (Start/Stop signal)
Output ranges
Quantization bit rate
Sampling method
Others
+/-2V fix
OVERWRITE : Endless record by overwriting older video
ONE WAY : Record stops on hard disk full
Record resumes on replacing or initializing hard disk
Normal playback, Reverse playback, Still image playback,
Skip playback, Block jump, Fast playback (x2, x4, x8),
Fast reverse playback (x2, x4, x8), Slow playback (1/2, 1/4, 1/8),
Slow reverse playback (1/2, 1/4, 1/8)
16bit (LSB 1 bit is used as identification sign)
Successive approximation type / Multiplexer type
Synchronous 4 channels
Playback
Sync accuracy
Sync signal
+/-1 frame (in one video channel mode)
Start/Stop signal input :
video and data recording
High-speed driving test
Starts on Low, stops on Hi (polarity reversible)
Duration : 100mS or more. Repeat duration: 600mS or more
Sampling clock signal input : Sampling clock of measuring data (200 kHz or less)
Alarm signal output : Indicates malfunctions of this unit
Event signal input :
Search
Time search : Search by record date and time
Event search : Search from event start date time list
ID search : Search from recording start point list
Stores latest 1000 events (event start date and time)
The video and analog data is easy to verify
using the built-in LCD monitor. Visual Data
Recorder AQ-VU is a unification of a visual
and data measurement.
Event
Menu
Event list
Negative logic pulse or make-contact, +5V pull-up (10k ohm) Stores event on Lo
Serial interface signal : TTL input / output
For events with duplicated time, the first event is stored.
*
Main unit settings
Record settings
Monitor settings
Pre-trigger
Time correction, 30 seconds correction, Communication
Hard disk mode, Analog input ON/OFF, Hard disk initialization, etc
Character (date and time) / Bar graph selectable
Set the recording time prior to the recording start condition as
mentioned above. Setting zero seconds is equivalent to no
(with not-delete) pre-trigger function
Ethernet
TCP/IP 100Base-TX
Recording media
2.5" removable HDD, using removable type package
Capacity : 40GB
Vehicle and rail safety test
and driving test
AQ-VU is a visual data recorder with 4 channels video and analog
signals that can be synchronously recorded and played back. Video
and data can be verified or played-back without a PC using a LCD
monitor and stand-alone AQ-VU. AQ-VU is a remarkable data
External
Exchanging operation :
level trigger
function
Exchange after stopping REC or PLAY, then shutting down the power.
Recording time : Approx. 5 hours / Approx. 10 hours (HDD:80GB)
Initialization : Quick (instant), Full (several hours with 40GB HDD)
Level trigger
Analog level
Set the level trigger threshold of designated channel.
When the analog input signal exceeds the threshold level,
the recording starts.
Internal clock accuracy less than 60 seconds per month (ambient temperature 25 degC, at operation)
Operating environment
recorder that can visually confirm
connecting to a PC.
a
physical event without
Record start
condition
Choice one of 1Channel to 4Channel.
Temperature
Temperature / Humidity (operating) : 0 to 35 degC / 10 to 80%RH
Temperature(non-operating) : -20 to 60 degC non-condensing
A trigger direction against the threshold level. UP(default) / DOWN
Set the level trigger threshold [example : +50% ]
The recording time prior to the recording start condition [0 to 999 sec]
When the START/STOP signal at the SYNC IN connector on the
rear panel is changed from L level to H level, the recording stops.
It is started with an operation button
Always remove the HDD pack out of the main body at the time of the
*
Product line
transportation by all means.
External trigger
Safety/Electromagnetic Radiation
Comply with Electrical Appliance and Material Safety Law Conform to VCCI Class A
Current / Power consumption
Manual operation
Internal clock
32 channels synchronized recording
Others
Correction : Manual entry in Monitor screen, or 30 seconds
auto correction
Approx. 2A / 24W (excluding a supply power to the camera on 12V operation)
Power Supply
By connecting with LX-100 series data recorder,
as much as 32 channels of data can be
synchronously recorded.
10 to 17V DC , 100 to 240V AC 50/60Hz (when using an adapter)
Dimension ( W x H x D )
Approx. 200 x 60 x 205 mm , 7 7/8" x 2 3/8" x 8 1/16" (excluding protruding Parts)
Weight
VIDEO OUT Connector
CAMERA IN Connector
LAN Connector
SYNC IN Connector
Equipment maintenance
such as elevators
DC IN Connector
POWER Switch
Approx. 2.3kg/5.07lb (Including 40GB HDD pack)
Standard accessories
Manual, Veiw Softwarer ( CD-ROM ), HDD Pack ( 40GB ), USB cable, BNC cable, AC adapter
CAMERA POWER Connector
LCD Display
ANALOG IN/OUT Connector
POWER LED
OPTION
LX-100 series sync. kit
VISUAL DATA RECORDER
AQ-VU
Contents of Kit
Temporary monitor of plumbing
and pump pressure such as
in air conditioning repair
Cable
LX View Basic Software㧔PL-S1100)
LX View Sync. Option Software
Network Monitoring AQ-Net (ꢀPL-S1100 )
Adapter cable for camera power supply (Approx. 10cm) CL-AQ-CPWR
BNC conversion cable (1.5m) CL-AQ-BNC
HDD Pack (40GB) PH-AQ-40
HDD Pack (80GB) PH-AQ-80
Factory/Plant equipment
MENU Key
FWD Key
PAUSE Key
REV Key
MONITOR Key
STOP Key
REC Key
Key
ENTER Key
It is used in a wide field
[ Product line ]
[ Architecture ]
Extended recording at an unattended automatic product line
Building skew and bridge shake
HDD Pack
[ Vehicle performance test ] Vibration data with synchronous video
on high-speed driving test
17
200
17
Unit : mm
[Bio-measurement] Driver's bio-measurement with synchronous video
[ Product line ]
Monitor to find a product line problem
and record vibration outbreak
Corporate and product names are the respective trademarks or registered trademarks of the companies mentioned. Features and specifications are subject to change without notice. Precaution : To ensure safe handling and operation, read the Instruction Manual before use.
[Support Service ] Temporary measurement and monitor of manufacturing
support service
Information Products Division
[ Elevators ]
[ Factory ]
Monitor elevator malfunction
1-47 Ochiai, Tama-shi, Tokyo 206-8530, Japan
Phone : +81-42-356-9161
Periodic maintenance of plant equipment
and temporarily monitor faulty point
Environmental tests of machinery
for deterioration, quake resistance, weather change
Production line safety check
FAX : +81-42-356-9185
[ Machinery ]
[ Product line ]
[ University / Research organization ]
PRINTED IN JAPAN 1008 1 NH BSC-029B
Copyright TEAC CORPORATION 2008
|