TRENDnet Router TEW 651BR User Manual

Quick Installation Guide  
TEW-651BR  
2.01  
 
1. Before You Start  
Package Contents  
ŸTEW-651BR  
ŸCD-ROM (User's Guide)  
ŸMulti-Language Quick Installation Guide  
ŸNetwork Cable (1.5m/4.9ft)  
ŸPower Adapter (5V DC, 1A)  
System Requirements  
ŸA computer with a wired or wireless network adapter properly installed (Note: It is  
recommended that you configure the Wireless Router from a wired computer)  
ŸWeb Browser: Internet Explorer (6.0 or higher)  
ŸBroadband Internet  
ŸInstalled Cable or DSL Modem  
 
1
Collect Internet Service Provider (ISP) Information  
Please verify your Internet broadband connection type with your ISP and ensure you have all the  
information for one of the following connection types:  
1. Obtain IP Address Automatically (DHCP)  
Host Name (Optional)  
Clone Mac Address (Optional)  
2. Fixed IP address  
WAN IP Address: _____. _____._____._____ (e.g. 215.24.24.129)  
WAN Subnet Mask: _____. _____._____._____  
WAN Gateway IP Address: _____. _____._____._____  
DNS Server Address 1: _____. _____._____._____  
DNS Server Address 2: _____. _____._____._____  
3. PPPoE to obtain IP automatically  
User Name: _________  
Password: ________________  
Verify Password: ________________  
4. PPPoE with a fixed IP address  
User Name: _________  
Password: ________________  
Verify Password: ________________  
IP Address: ____. _____._____._____ (e.g. 215.24.24.129)  
5. PPTP or Russian PPTP  
Type (Dynamic IP or Static IP )  
My IP Address: _____. _____._____._____ (e.g. 215.24.24.129)  
Subnet Mask:_____. _____._____._____  
Gateway:_____. _____._____._____  
Server IP: _____. _____._____._____  
PPTP Account: ________________  
PPTP Password: ________________  
Retype Password: ________________  
6. L2TP or Russia L2TP  
Type (Dynamic IP or Static IP)  
My IP Address: _____. _____._____._____ (e.g. 215.24.24.129)  
Subnet Mask:_____. _____._____._____  
Gateway:_____. _____._____._____  
Server IP: _____. _____._____._____  
L2TP Account: ________________  
L2TP Password: ________________  
Retype Password: ________________  
7. Russia PPPoE  
Type (Dynamic IP or Static IP)  
User Name: _________  
Password: ________________  
Verify Password: ________________  
IP Address: ____. _____._____._____ (e.g. 215.24.24.129)  
 
2
2. Hardware Installation  
Note: Gather all information related to your Internet Connection before you start. If necessary,  
contact your Internet Service Provider (ISP).  
1. Verify that you have an Internet connection  
when connecting your computer directly to the  
Internet  
Cable or DSL modem. Open your browser (e.g.  
Internet Explorer) and type in a URL (e.g.  
Cable/DSL Modem  
2. Power off your cable or DSL modem.  
3. Disconnect the network cable from your Cable  
or DSL modem and your computer.  
4. Connect one end of a network cable to one of  
the TEW-651BR's LAN ports. Connect the  
other end of the cable to the computer's  
network port.  
5. Connect one end of a network cable to the  
TEW-651BR’s WAN port. Connect the other  
end of the cable to your modem’s network port.  
6. Connect the Power Adapter to the wireless  
router and then to a power outlet. Push the  
power button to the “On” position.  
 
3
7. Power on your cable or DSL modem. Wait until  
the LEDs indicate that modem is fully booted  
up. Consult with the modem User's Guide for  
more information.  
8. Verify that the following panel lights are on:  
Power (Green), Status (Green), LAN (Green),  
WAN and WLAN (Green).  
 
4
3. Configure the Wireless Router  
Note: It is recommended that you configure the Wireless Router from a wired computer.  
1. Open your web browser, type  
http://192.168.10.1 in the Address bar, and  
then press Enter.  
2. Enter the User Name and Password and then  
click Login. By default:  
User Name: admin  
Password: admin  
Note: User name and Password are case  
sensitive.  
3. The Wizard will automatically appear. Click  
Wizard if the Wizard does not automatically  
appear.  
 
5
4. Click Next.  
5. Enter a Password, verify the Password and  
then click Next. By default, the Password is  
admin.  
Note:  
1.Setting a password prevents other users from  
accessing the TEW-651BR's configuration.  
2.It is recommended that you enter a new  
password. If you decide to change this  
setting, please write down the new password.  
6. Select your Time Zone and then click Next.  
7. Click Next. Note: In most cases, the default  
LAN & DHCP server settings are fine.  
8. Configure the settings based on information  
provided by your ISP. Follow the wizard  
instructions to complete the configuration.  
Note: Each Internet Connection type may have  
different options.  
 
6
9. Select Enable for Wireless LAN. Select Disable  
if you do not want any wireless computers or  
device to connect to this device.  
10. Enter a unique SSID (Network Name). Do not  
use anything that would be identifying like  
“Smith Family Network”. Choose something  
that you would easily identify when searching  
for available wireless networks.  
11. In most cases, the default channel is fine.  
12. Click Next.  
Note:  
1. To protect your network from any unauthorized access it is recommended to enable  
wireless encryption. Please refer to the User Guide on the User's Guide CD-ROM for  
information on setting up encryption on the wireless router.  
2. Once encryption is enabled on the router, each wireless computer and device must  
be configured with the same encryption key.  
13. Click Restart.  
14. Wait 10 seconds while the router reboots.  
 
7
15. Open up your browser and enter in a URL  
have Internet connection.  
Your configuration is now complete  
For detailed information regarding the TEW-651BR configuration and advanced settings,  
please refer to User's Guide included on the Utility CD-ROM, or TRENDnet's website at  
Register Your Product  
To ensure the highest level of customer service and support, please take a moment to  
register your product Online at: www.trendnet.com/register  
Thank you for choosing TRENDnet  
 
8
Troubleshooting  
says “The page cannot be displayed.” How can I get into the TEW-651BR's web  
configuration page?  
1. Check your hardware settings again by following the instructions in Section 2.  
2. Make sure the LAN and WLAN lights are lit.  
3. Make sure your Network adapter’s TCP/IP settings are set to Obtain an IP address  
automatically (see the steps below).  
4. Press on the factory reset button for 15 seconds.  
Windows 7  
1. Go into the Control Panel, click Network and  
Sharing Center, click Change Adapter  
Settings and then right-click the Local Area  
Connection icon and then click Properties.  
2. Click Internet Protocol Version 4(TCP/IPv4) and  
then click Properties. Then click on Obtain an IP  
address automatically.  
Windows Vista  
1. Go into the Control Panel, click Network  
and Internet, click Network and Sharing  
Center, click Manage Network Connections  
and then right-click the Local Area  
Connection icon and then click Properties.  
2. Click Internet Protocol Version 4(TCP/IPv4) and  
then click Properties. Then click on Obtain an IP  
address automatically.  
Windows XP/2000  
1. Go into the Control Panel, double-click the  
Network Connections icon and then right-  
click the Local Area Connection icon and  
then click Properties.  
 
9
2. Click Internet Protocol (TCP/IP) and then  
click Properties. Then click on Obtain an IP  
address automatically.  
2. I am not sure what type of Internet Account Type I have for my Cable/DSL connection.  
How do I find out?  
Contact your Internet Service Provider's (ISP) support service for the correct information.  
3. The Wizard does not appear. What should I do?  
1. Click on Wizard on the left hand side.  
2. Near the top of the browser, “Pop-up blocked” message may appear. Right click on the  
message and select Always Allow Pop-ups from This Site.  
3. Disable your browser's pop up blocker.  
4. I went through the Wizard, but I can not get onto the Internet. What should I do?  
1. Verify that you can get onto the Internet with a direct connection into your modem.  
2. Contact your ISP and verify all the information that you have in regards to your Internet  
connection settings is correct.  
3. Power cycle your modem and router. Unplug the power to the modem and router. Wait  
30 seconds, and then reconnect the power to the modem. Wait for the modem to fully  
boot up, and then reconnect the power to the router.  
5. I cannot make a wireless connection to the Router. What should I do?  
1. Double check that the WLAN light on the Router is lit.  
2. Power cycle the TEW-651BR. Unplug the power to the TEW-651BR. Wait 15 seconds,  
then plug the power back in to the TEW-651BR.  
3. Contact the manufacturer of your wireless network adapter and make sure the wireless  
network adapter is configured with the proper SSID. The preset SSID is TRENDnet651.  
4. Encryption may be enabled on the Router. To verify whether or not wireless is enabled,  
login to the router configuration, click on Wireless.  
5. Please refer to the Wireless tips section if you continue to have wireless connectivity  
problems.  
If you still encounter problems or have any questions regarding the TEW-651BR, please contact  
TRENDnet's Technical Support Department.  
 
10  
Wireless Tips  
The following are some general wireless tips to help minimize the impact of interference within an  
environment.  
Assign your network a unique SSID  
Do not use anything that would be identifying like “Smith Family Network”. Choose  
something that you would easily identify when searching for available wireless networks.  
Do not turn off the SSID broadcast  
The SSID broadcast is intended to be on and turning it off can cause connectivity issues.  
The preferred method of securing a wireless network is to choose a strong form of encryption  
with a strong and varied encryption key.  
Note: after setting up the SSID, encryption type and encryption key/passphrase, please  
make a note of them for future reference. You will need this information to connect your  
wireless computers to the wireless router/access point.  
Change the channel  
Most wireless access points and routers are defaulted to channel 6. If you have a site survey  
tool that will display the channels you can plan your channel selection around neighboring  
access points to minimize interference from them. If your site survey tool does not display  
the channel try using channels 1 or 11.  
Change the channel bandwidth  
If you are using an 802.11n router or access point you can also make the following changes.  
Change the channel bandwidth to 20/40MHz. This will provide the highest possible  
performance using an 802.11n device. Also, if using 802.11n you should be securing the  
network with WPA2 security.  
Note: Due to Wi-Fi certification considerations if you choose WEP, WPA or WPA2-TKIP  
encryption this device may operate in legacy wireless mode (802.11b/g). You may not get  
802.11n performance as these forms of encryption are not supported by the 802.11n  
specification.  
Avoid stacking hardware on top of each other to prevent overheating issues  
Maintain enough free space around the hardware for good ventilation and airflow. There  
should also be plenty of free space around the antennas to allow the wireless signal to  
propagate. Please also make sure that the wireless hardware is not placed in any type of  
shelving or enclosures.  
There are a number of other environmental factors that can impact the range of wireless  
devices.  
1. Adjust your wireless devices so that the signal is traveling in a straight path, rather than at  
an angle. The more material the signal has to pass through the more signal you will lose.  
Download from Www.Somanuals.co1m1. All Manuals Search And Download.  
2. Keep the number of obstructions to a minimum. Each obstruction can reduce the range of  
a wireless device. Position the wireless devices in a manner that will minimize the amount  
of obstructions between them.  
3. Building materials can have a large impact on your wireless signal. In an indoor  
environment, try to position the wireless devices so that the signal passes through less  
dense material such as dry wall. Dense materials like metal, solid wood, glass or even  
furniture may block or degrade the signal.  
4. Antenna orientation can also have a large impact on your wireless signal. Use the wireless  
adapter's site survey tool to determine the best antenna orientation for your wireless  
devices.  
5. Interference from devices that produce RF (radio frequency) noise can also impact your  
signal. Position your wireless devices away from anything that generates RF noise, such  
as microwaves, HAM radios, Walkie-Talkies and baby monitors.  
6. Any device operating on the 2.4GHz frequency will cause interference. Devices such as  
2.4GHz cordless phones or other wireless remotes operating on the 2.4GHz frequency  
can potentially drop the wireless signal. Although the phone may not be in use, the base  
can still transmit wireless signals. Move the phone's base station as far away as possible  
from your wireless devices.  
If you are still experiencing low or no signal consider repositioning the wireless devices or installing  
additional access points. The use of higher gain antennas may also provide the necessary  
coverage depending on the environment.  
 
12  
Declaration of Conformity  
Company Information:  
Company Name:  
TRENDnet, Inc.  
Company Address:  
20675 Manhattan Place  
Torrance, CA 90501  
USA  
Product Information:  
Product Description:  
150Mbps Wireless N Home Router  
Model Number:  
TEW-651BR  
Brand name:  
TRENDnet  
Technical Standards :  
EN 300 328  
V1.7.1: 10-2006  
EN 301 489-1 V1.8.1: 04-2008  
EN 301 489-17 V2.1.1: 05-2009  
EN 60950-1: 2006 + A11 : 2009  
Declaration:  
The product is herewith confirmed to comply with the requirements of Directive 1999/5/EC of the Council (European  
Parliament) on the radio and telecommunications terminal equipment and Energy-related products Directive  
2009/125/EC.  
I hereby declare that the products and devices mentioned above are consistent with the standards and provisions of the  
guidelines.  
Sonny Su  
Director of Technology  
Full Name  
Position / Title  
November 4, 2010  
Signature  
Date  
 
GPL/LGPL General Information  
This TRENDnet product includes free software written by third party developers. These codes are subject to the GNU  
General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). These codes are distributed WITHOUT  
WARRANTY and are subject to the copyrights of the developers. TRENDnet does not provide technical support for these  
codes. The details of the GNU GPL and LGPL are included in the product CD-ROM.  
license.  
least three years from the product shipping date.  
You could also request the source codes by contacting TRENDnet.  
20675 Manhattan Place, Torrance, CA 90501, USA. Tel: +1-310-961-5500 Fax: +1-310-961-5511  
Informations générales GPL/LGPL  
Ce produit TRENDnet comprend un logiciel libre écrit par des programmeurs tiers. Ces codes sont sujet à la GNU General  
Public License ("GPL" Licence publique générale GNU) ou à la GNU Lesser General Public License ("LGPL" Licence  
publique générale limitée GNU). Ces codes sont distribués SANS GARANTIE et sont sujets aux droits d'auteurs des  
programmeurs. TRENDnet ne fournit pas d'assistance technique pour ces codes. Les détails concernant les GPL et LGPL  
GNU sont repris sur le CD-ROM du produit.  
conditions spécifiques de chaque licence.  
Les codes source sont disponibles au téléchargement sur le site Internet de TRENDnet web site  
Vous pouvez également demander les codes source en contactant TRENDnet.  
20675 Manhattan Place, Torrance, CA 90501, USA. Tel: +1-310-961-5500 Fax: +1-310-961-5511  
Allgemeine Informationen zu GPL/LGPL  
freie Software „Linux „mtd“ (Memory Technology Devices) Implementation (© 2000 David Woodhouse), erstmals integriert in  
Linux Version 2.4.0-test 3 v. 10.07.2000 (http://www.kernel.org/pub/linux/kernel/v2.4/old-test-kernels/linux-2.4.0-test3.tar.bz2),  
sowie weitere freie Software. Sie haben durch den Erwerb dieses Produktes keinerlei Gewährleistungsansprüche gegen die  
Berechtigten an der oben genannten Software erworben; weil diese die Software kostenfrei lizenzieren gewähren sie keine  
Haftung gemäß unten abgedruckten Lizenzbedingungen. Die Software darf von jedermann im Quell-und Objektcode unter  
Beachtung der Lizenzbedingungen der GNU General Public License Version 2, und GNU Lesser General Public License  
(LGPL) vervielfältigt, verbreitet und verarbeitet werden. Die Lizenz ist unten im englischsprachigen Originalwortlaut  
wiedergegeben. Eine nichtoffizielle Übersetzung in die deutsche Sprache finden Sie im Internet unter  
mitgelieferten CD-ROM.  
des Downloads verfügen können Sie bei TRENDnet.  
20675 Manhattan Place, Torrance, CA 90501 -U.S.A -, Tel.: +1-310-961-5500, Fax: +1-310-961-5511 die Software anfordern.  
Información general sobre la GPL/LGPL  
Este producto de TRENDnet incluye un programa gratuito desarrollado por terceros. Estos códigos están sujetos a la  
Licencia pública general de GNU (“GPL”) o la Licencia pública general limitada de GNU (“LGPL”). Estos códigos son  
distribuidos SIN GARANTÍA y están sujetos a las leyes de propiedad intelectual de sus desarrolladores. TRENDnet no ofrece  
servicio técnico para estos códigos. Los detalles sobre las licencias GPL y LGPL de GNU se incluyen en el CD-ROM del  
producto.  
específicas de cada licencia.  
Los códigos fuentes están disponibles para ser descargados del sitio Web de TRENDnet  
También puede solicitar el código fuente llamando a TRENDnet.  
20675 Manhattan Place, Torrance, CA 90501, USA. Tel: +1-310-961-5500 Fax: +1-310-961-5511  
Общая информация о лицензиях GPL/LGPL  
В состав данного продукта TRENDnet входит бесплатное программное обеспечение, написанное сторонними  
разработчиками. Это ПО распространяется на условиях лицензий GNU General Public License ("GPL") или GNU  
Lesser General Public License ("LGPL"). Программы распространяются БЕЗ ГАРАНТИИ и охраняются авторскими  
правами разработчиков. TRENDnet не оказывает техническую поддержку этого программного обеспечения.  
Подробное описание лицензий GNU GPL и LGPL можно найти на компакт-диске, прилагаемом к продукту.  
В пунктах (http://www.gnu.org/licenses/gpl.txt) и (http://www.gnu.org/licenses/lgpl.txt) изложены конкретные условия  
каждой из лицензий.  
Исходный код программ доступен для загрузки с веб-сайта TRENDnet (http://trendnet.com/downloads/list_gpl.asp) в  
течение, как минимум, трех лет со дня поставки продукта.  
Кроме того, исходный код можно запросить по адресу TRENDnet.  
20675 Manhattan Place, Torrance, CA 90501, USA. Tel: +1-310-961-5500 Fax: +1-310-961-5511  
 
GPL/LGPL informações Gerais  
Este produto TRENDnet inclui software gratuito desenvolvido por terceiros. Estes códigos estão sujeitos ao GPL (GNU  
General Public License) ou ao LGPL (GNU Lesser General Public License). Estes códigos são distribuídos SEM GARANTIA  
e estão sujeitos aos direitos autorais dos desenvolvedores. TRENDnet não presta suporte técnico a estes códigos. Os  
detalhes do GNU GPL e do LGPL estão no CD-ROM do produto.  
licença.  
Os códigos fonte estão disponíveis para download no site da TRENDnet (http://trendnet.com/langen/downloads/list_gpl.asp)  
por pelo menos três anos da data de embarque do produto.  
Você também pode solicitar os códigos fonte contactando TRENDnet, 20675 Manhattan Place, Torrance, CA 90501,  
USA.Tel: +1-310-961-5500, Fax: +1-310-961-5511.  
GPL/LGPL üldinformatsioon  
See TRENDneti toode sisaldab vaba tarkvara, mis on kirjutatud kolmanda osapoole poolt. Koodid on allutatud GNU (General  
Public License) Üldise Avaliku Litsentsi (GPL) või GNU (Lesser General Public License) ("LGPL") Vähem Üldine Avalik  
Litsentsiga. Koode vahendatakse ILMA GARANTIITA ja need on allutatud arendajate poolt. TRENDnet ei anna koodidele  
tehnilist tuge. Detailsemat infot GNU GPL ja LGPL kohta leiate toote CD-ROMil. Infot mõlema litsentsi spetsiifiliste terminite  
Samuti võite lähtekoodi paluda TRENDneti'lt, 20675 Manhattan Place, Torrance, CA 90501, USA. Tel: +1-310-961-5500,  
Fax: +1-310-961-5511.  
 
Certifications  
This equipment has been tested and found to comply with FCC and CE Rules.  
Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference.  
(2) This device must accept any interference received. Including interference that may  
cause undesired operation.  
Waste electrical and electronic products must not  
be disposed of with household waste. Please  
recycle where facilities exist. Check with you Local  
Authority orRetailer for recycling advice.  
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV  
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS  
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO  
OPERATE THE EQUIPMENT.  
ADVERTENCIA  
En todos nuestros equipos se mencionan claramente las caracteristicas del adaptador de  
alimentacón necesario para su funcionamiento. El uso de un adaptador distinto al  
mencionado puede producir daños fisicos y/o daños al equipo conectado. El adaptador  
de alimentación debe operar con voltaje y frecuencia de la energia electrica domiciliaria  
existente en el pais o zona de instalación.  
 
Product Warranty Registration  
Please take a moment to register your product online.  
 
Copyright ©2010. All Rights Reserved. TRENDnet.  

Teac Car Stereo System AD 500 User Manual
Tech Craft TV Video Accessories NTR48 User Manual
Topcom Automobile Accessories SMC 1000H User Manual
Toro Lawn Mower 98958SL User Manual
Toshiba TV DVD Combo MD14FN1C User Manual
Tripp Lite Network Cables N002 014 GY User Manual
Tunturi Home Gym E603 User Manual
Universal Remote Control Universal Remote M1055 User Manual
Vizio CRT Television VOJ370 User Manual
VXI Headphones B1000 GTX User Manual