TP Link Computer Hardware TL WNB51N User Manual

The product model shown in this QIG is TL-WN851N, as an example.  
Note  
1. Power down your computer and unplug its power cord;  
2. Open the case and locate an available PCI slot on the motherboard;  
3. Insert the PCI Adapter into the PCI slot. Make sure that all of its pins are  
touching the slot's contacts. You may have to apply a bit of pressure to slide the  
adapter all the way in. After the adapter is firmly in place, secure its fastening  
tab to your computer's chassis with a mounting screw;  
4. Close the case and insert the power cable into the computer, then turn on the  
computer.  
1
 
Click Next  
Choose Install  
Driver Only  
Click Next  
Follow the step-by-step instructions  
to finish the driver installation.  
If prompted to ‘The software has not  
passed Windows Logo testing to  
verify its compatibility with Windows  
XP’, click Continue Anyway to  
continue.  
Click Finish  
3
 
Connecting to the Wireless Router/Access Point  
If the Wirless Router/Access Point supports Wi-Fi Protected Setup (WPS)  
function, you are recommanded to use the QSS (Quick Secure Setup) to  
quickly connect to your wireless network. Please refer to the Appendix  
Connecting to the Wireless Router by QSS.  
Note  
After you have successfuly installed the driver software, the icon  
will appear on  
the bottom right-hand corner of your desktop.  
Click  
Click Refresh network list  
Select your network by  
the network name  
Click Connect  
Input the Network key of  
your wireless network  
Click Connect  
If you don’t know the wireless network key, please consult the network  
administrator or log on to the setup page of your Wireless Router/Access  
Point with an Ethernet cable to check the wireless security settings. Please  
refer to the manual of your Wireless Router/Access Point or contact the  
manufactory’s technical support for more details.  
Note  
4
 
You have now successfully connected  
to your wireless network.  
If your network is an unsecured network, you will not be prompted to input the  
Network key. It will connect to your network automatically.  
1
Note  
5
 
Installing Adapter Driver  
You may see the Found New  
Hardware Wizard when the  
computer boots up. This is the  
default setup wizard of Windows  
Vista. For a smoother installation,  
please click “Cancel” and insert  
the provided TP-LINK Resource  
CD.  
Click Cancel  
After inserting the provided Resource  
CD into your CD-ROM drive, the  
Setup Wizard will automatically pop  
up on your computer’s screen.  
Choose Install Driver&Utility  
6
 
Click Next  
Follow the step-by-step instructions  
to finish the driver installation.  
If prompted to ‘Windows can’t verify  
the publisher of this driver software’,  
click Install the driver software  
Anyway to continue.  
Click Finish  
7
 
Connecting to the Wireless Router/Access Point  
If the Wirless Router/Access Point supports Wi-Fi Protected Setup (WPS)  
function, you are recommanded to use QSS (Quick Secure Setup) to quickly  
connect to your wireless network. Please refer to the Appendix Connecting to  
the Wireless Router by QSS.  
Note  
Click this icon at the bottom  
right of the desktop and then  
click Connect to a network  
Click this button to refresh  
the network list  
Select your network by  
the network name  
Click Connect  
Input the Network  
key of your wireless  
network  
Click Connect  
8
 
If you don’t know the wireless network key, please consult the network  
administrator or log on to the setup page of your Wireless Router/Access  
Point with an Ethernet cable to check the wireless security settings. Please  
refer to the manual of your Wireless Router/Access Point or consult the  
manufactory’s technical support for more details.  
Note  
You have now successfully  
connected to your wireless  
network.  
Save this network for  
automatically connecting  
Click Close  
If your network is an unsecured network, you will not be prompted to input the  
Network key. It will connect to your network automatically.  
Note  
9
 
Installing the QSS Driver  
Click Install QSS  
Follow the step-by-step instructions  
to finish the QSS installation.  
Click Finish  
10  
 
Connecting to the Wireless Router  
Double click the icon  
on the  
desktop to open the QSS Utility, and  
this page will display.  
Click Next  
Select Enter the PIN from  
my access point  
Input the PIN printed on  
the back of the Router  
Click Next  
11  
 
Wait for the Adapter to connect to  
the Wireless Router.  
Click Finish to complete the  
connection.  
Click Finish  
12  
 
Technical Support  
For more troubleshooting help, go to:  
To download the latest Firmware, Driver, Utility and User Guide, go to:  
For all other technical support, please contact us by using the following  
details:  
Global  
Australia & New Zealand  
Tel: AU 1300 87 5465  
Tel:  
+86 755 26504400  
E-mail : [email protected]  
NZ 0800 87 5465  
Service time:24hrs, 7days a week  
Service time: Monday to Friday  
9:00 AM to 9:00 PM AEST  
Singapore  
Tel: +65 62840493  
USA/Canada  
Service time: 24hrs, 7days a week  
Toll Free: +1 866 225 8139  
Service time: 24hrs, 7days a week  
Germany / Austria / Switzerland  
Tel :+49 1805 875465 (German  
Service)  
UK  
Service time: GMT+ 1 or GMT+ 2  
(Daylight Saving Time in  
Germany)  
Tel: +44 (0) 845 147 0017  
Service time: 24hrs, 7days a week  
Except bank holidays in Hesse  
 

Tascam CD Player CD RW4U User Manual
TiVo DVR TCD540080 User Manual
Toastmaster Waffle Iron FWB275 User Manual
Toshiba Flat Panel Television 19SL410U User Manual
TRENDnet Network Hardware TPL405E User Manual
Unified Brands Ventilation Hood Premier Ventilation User Manual
Univex CD Player DXZ775USB User Manual
VBrick Systems Switch v41 User Manual
Vertical Communications Telephone 8112N User Manual
Vizualogic Car Video System HindsightTM User Manual