TP Link Camera Accessories TL SC4171G User Manual

Package Contents  
Physical Description  
Warning Before Installation  
Do not keep the Camera exposed  
to direct sunlight.  
2
1
Antenna Connector  
Audio Out  
Power Connector  
Network Connector  
Quick Installation Guide  
General I/O Terminal Block  
Audio In  
12V DC  
reset  
Audio in  
Audio out  
Ethernet  
I/O  
Camera  
Mounting Bracket  
Power Adapter  
Do not place the Camera in high  
humidity environments such as  
in a kitchen.  
Wireless Pan/Tilt Surveillance Camera  
Reset Button  
Quick Installation Guide  
Wireless Pan/Tilt Surveillance Camera  
Built-in Microphone  
MODEL NO. TL-SC4171G  
Power LED  
Ethernet LED  
Do not place the Camera where  
there are high temperatures  
such as near an oven.  
Ethernet Cable  
Resource CD  
QIG  
(*The pictures are for reference only.)  
Item  
Description  
System Requirement  
The following operating systems are supported:  
Solid: The electrical power is on.  
Off: There is no electrical power.  
Power LED  
Windows 2000  
Windows Vista  
Windows 2003  
Windows 7  
Windows XP  
Mac  
Solid: The Ethernet port is linked, but there is no activity.  
Do not place the Camera near  
devices that emit radio waves,  
such as mobile phones.  
Blinking: There is traꢁc between the Ethernet port and  
the network.  
Ethernet LED  
Reset Button  
The following browsers are supported:  
Internet Explorer 6 or higher  
Off: There is no network connection.  
Step 1: Re-power on the camera and wait for at least 45s  
until it restarts up normally.  
Step 2: Press the button for more than 10s, then it will be  
Safari  
Firefox  
Chrome  
MODEL NO. TL-SC4171G  
(*Windows and Internet Explore Browser are recommended.)  
restored to factory defaults after automatic rebooting.  
Hardware Connection  
Camera Mounting  
4
3
Connect the Camera to the LAN network (Router or Switch)  
via Ethernet cable.  
Hollow anchors  
Type A screws  
Type B screws  
NOTE: In the bracket, there are several mounting holes arranged in a circle. The direction of the camera’s  
Connect the power adapter cord to the DC In jack.  
Plug the power adapter into the power outlet.  
installation can be anywhere within a 360 degree scope, adjusted as required.  
It is strongly recommended that you connect the Ethernet cable and power adapter cord to the camera ꢀrst  
before mounting.  
Bracket  
*For wireless connection, please refer to User Guide on the Resource CD.  
Ceiling Mount  
Wall Mount  
Fix the bracket to the wall  
using two type B screws and  
two hollow wall anchors.  
Before proceeding, conꢀrm that your PC is connected  
to your router and can access the Internet.  
Fix the camera to the bracket  
with two type A screws .  
1
1
Make sure that your router’s DHCP feature is enabled.  
If not, please refer to your router’s instruction to  
enable it.  
Audio in  
Audio out  
12V DC  
reset  
Ethernet  
I/O  
Internet  
Fix the camera to the bracket  
with two type A screws .  
Fix the bracket and camera  
to the ceiling using two  
type B screws and two  
hollow ceiling anchors.  
2
2
Power Cable  
1
2
3
WAN  
LAN  
Router  
Ethernet Cable  
7106503435  
 

Tascam Music Mixer DM 3200 User Manual
Tech 21 Musical Instrument Amplifier Acoustic DI User Manual
Tech Craft TV Video Accessories NCL62 User Manual
Texas Instruments Stereo Amplifier TPA6204A1 User Manual
Toastmaster Humidifier WST7503 User Manual
Toshiba Computer Hardware T6963C User Manual
Transcend Information Digital Photo Frame PF705 User Manual
Tripp Lite Network Card U007 40M User Manual
Univex Flat Panel Television HD65W40 User Manual
Viking Electronics Cooktop F20033E User Manual