Sylvania VCR C6240VE User Manual

RF Output Channel  
If channel 3 is already occupied for broadcasting,  
1) Set your TV to channel 4.  
2) Insert a pre-recorded tape into the VCR.  
3) Press the PLAY button once.  
4) After a few seconds, press the PLAY button on the VCR for 3 seconds.  
If you need additional operating assis-  
tance after reading this owner’s manual  
or to order replacement accessories,  
please call  
Hint  
OWNER’S MANUAL  
VIDEO CASSETTE RECORDER  
• The RF output channel may  
not change when you adjust  
tracking during playback. In  
this case, stop the playback,  
and start the playback again.  
After that, press the PLAY but-  
ton on the VCR for 3 seconds  
again.  
TOLL FREE : 1-800-287-4871  
C6240VE  
The RF output channel will change to channel 4 from channel 3 and you will  
see a playback picture.  
• When a picture does not appear on the TV screen, repeat step [4].  
5) Press the STOP button to stop playback.  
1. Before using your VCR  
BasicVCR/TV Connection  
StereoTV Connection  
VIDEO  
IN  
AUDIO IN  
Antenna  
Antenna  
Cable  
Signal  
or  
Cable  
Signal  
or  
You can use the AUDIO OUT jack and  
VIDEO OUT jack on the back of the  
VCR if your TV has Audio/Video Input  
jacks. In this case, you need to set the  
TV to external Line Input Mode. Please  
L
R
ANT  
IN  
(Back of VCR)  
(Back of TV)  
ANT  
IN  
AUDIO  
OUT  
IN  
OUT  
(Back of TV)  
VIDEO  
Audio/Video Cables  
(not supplied)  
ANT  
IN  
2
OUT  
VIDEO  
OUT  
AUDIO OUT  
Disconnect  
3
OUT  
1
Connect  
L
R
refer to your TV’s owner’s manual.  
Connect  
Connect  
(Back of VCR)  
(Back of TV)  
Front & RearTerminals  
RF Cable (supplied)  
AUDIO OUT jack  
AUDIO IN jack  
Plug the AC power cords of the VCR and TV into the AC outlets.  
Connect the audio cable to the audio in jack  
of a camcorder, another VCR, a stereo  
amplifier, or an audio system.  
4
Connect the audio cable from the audio out  
jack of a camcorder, another VCR, or an  
audio source.  
Hint for Cable Box or Satellite Box  
(Back of VCR)  
ANT  
(Back of VCR)  
Connection B  
Connection A  
ANT IN jack  
Connect your antenna or cable box.  
IN  
(Cable box or  
Satellite box)  
ANT  
IN  
ANT  
IN  
(Cable box or  
Satellite box)  
ANT  
IN  
AUDIO  
IN  
O
OUT  
U
Cable  
Signal  
E
T
AUDIO  
E
OUT  
IN  
O
U
RF Cable  
(supplied)  
T
OUT  
IN  
Cable  
Signal  
OUT  
ANT OUT jack  
OUT  
IN  
VIDEO  
OUT  
(Back of TV)  
(Back of TV)  
Connect the RF cable (supplied) to  
RF Cable (supplied)  
RF Cable  
VIDEO  
the antenna input jack on your TV.  
Select this connection when you want to view or record a Select this connection when you want to change channels  
VIDEO OUT jack  
scrambled channel.  
on the VCR. With this connection, you may watch one  
channel while recording another.  
Connect the video cable to the video in jack  
of a camcorder, another VCR, or a TV.  
VIDEO IN jack  
With this connection, channels cannot be changed on the  
VCR. You can view or record ONLY the channels you have  
selected on the cable box or the satellite box.  
Connect the video cable from the video out  
jack of a camcorder, another VCR, or an  
audio-visual source (laser disc player,  
video disc player, etc.).  
You may not view or record a scrambled channel.  
POWER CHANNEL  
n
m
POWER VCR/TV TAPE IN TIMER  
R
• While you are recording, only the recorded channel can  
be viewed.  
T
o select channels of the cable box or satellite box  
VIDEO  
AUDIO  
1)At the cable box or satellite box, select channel 3 or 4  
(the same channel as the VCR’s RF output channel.)  
• Refer to “RF Output Channel”.  
T
o select channels of the cable box or satellite box  
1)Turn on the VCR by pressing the POWER button, and  
then, press the VCR/TV button.The POWER and the  
VCR/TV indicators on the front panel will light on. Then,  
press the CHANNEL buttons to select channel 3 or 4  
(the same channel as the output channel of the cable  
box or satellite box).  
2)At the TV, select the same channel as the output chan-  
nel (3 or 4) of the cable box or satellite box.  
Installing the Batteries for  
the Remote Control  
Install two AA batteries  
(supplied) matching the  
polarity indicated on  
the bottom of the  
Supplied Accessory  
3)Turn on the VCR by pressing the POWER button, and  
then, press the VCR/TV button .The POWER and  
VCR/TV indicators on the front panel will light on. Then,  
select the channel you want to view or record.  
• Remote control  
(NA371UD) with  
Two AA batteries  
• RF Cable  
• Owner’s Manual  
(WPZ0901TM002) (0VMN04007)  
• If you use the channel 4, you need to change the VCR’s  
RF output to channel 4. Refer to “RF Output Channel”.  
2) At the TV, select channel 3 or 4 (the same channel as  
you have selected at step 1).  
3) At the cable box or satellite box, select the channel you  
want to view or record.  
T
o play back a tape  
Follow the steps 1) to 2) above. Then, play back a tape.  
• Refer to “Playback” on page 5.  
remote control.  
To view one channel while recording another  
1)While you are recording on the VCR, press the VCR/TV but-  
ton so that the VCR/TV indicator disappears on the VCR.  
2)At the cable box or satellite box, select the channel you  
want to view.  
Printed in China  
0VMN04007 / HF350CD ★★★★★  
 
- 1 -  
3. Preset for Use  
Turn on theVCR for the first time  
To Add/Delete Channels  
Clock Set Up  
MENU  
MENU  
To Select a Channel  
-MENU-  
-MENU-  
1
1
1
5
6
7
CLOCK SET  
MONTH DAY YEAR  
You can select a channel by directly  
pressing the Number buttons on the  
remote control.  
Notes for using the Number but-  
tons:  
TIMER PROGRAMMING  
AUTO REPEAT [OFF]  
B CHANNEL SET UP  
CLOCK SET  
TIMER PROGRAMMING  
AUTO REPEAT [OFF]  
CHANNEL SET UP  
B CLOCK SET  
LANGUAGE SELECT  
Turn on the TV and set  
it to channel 3.  
0 3 1 5 MON 2 0 0 4  
/
HOUR MINUTE AM/PM  
0 5 – – – –  
LANGUAGE SELECT  
or  
or  
or  
• If channel 3 is already occupied for broad-  
casting, see“RF Output Channel” section.  
:
or  
When selecting cable channels which  
are higher than 99, enter channel  
numbers as a three-digit number.(For  
example: 117, press 1,1,7)  
Select the current hour  
or  
• If the clock is not set, the  
CLOCK SET screen  
appears when you press  
the MENU button. In this  
case, go to step [2].  
POWER  
Remote Control TV Screen  
LANGUAGE SELECT  
2
3
You must precede single-digit  
channel numbers with a zero (For  
example: 02, 03, 04 and so on).  
CLOCK SET  
B ENGLISH  
FRANCAIS  
ESPAÑOL  
[ON]  
MONTH DAY  
YEAR  
0 3 1 5 MON 2 0 0 4  
/
2
3
CHANNEL SET UP  
2
3
4
CLOCK SET  
HOUR MINUTE AM/PM  
0 5 4 0 – –  
To Preset the Channel Again  
1) Press the MENU button until the main  
:
AUTO SET UP  
or  
MONTH DAY  
0 3 – –  
YEAR  
B MANUAL SET UP  
/
– – – –  
or  
menu appears.  
HOUR MINUTE AM/PM  
– – – – – –  
or  
Select the current minute  
CLOCK SET  
:
2) Select "CHANNEL SET UP" by pressing the  
PLAY or STOP button. Then, press the  
F.FWD button.  
Select the current month  
3) Select "AUTO SET UP" by pressing the  
PLAY or STOP button. Then, press the  
F.FWD button. After scanning, the tuner  
stops on the lowest memorized channel.  
CH 01  
MONTH DAY  
YEAR  
AUTO SET UP  
0 3 1 5 MON 2 0 0 4  
/
MANUAL SET UP  
CLOCK SET  
HOUR MINUTE AM/PM  
CHANNEL 30  
ADD  
(CATV)  
0 5  
:
4 0  
P M AM  
B PM  
MONTH DAY  
0 3 1 5  
YEAR  
– – – –  
To Change the On-Screen Language  
1) Press the MENU button until the main  
/
or  
HOUR MINUTE AM/PM  
– – – – – –  
or  
Do you connect the cable of the cable box or  
the satellite box to the VCR’s ANT IN jack?  
Select “AM” or “PM”  
menu appears.  
:
2) Select "LANGUAGE SELECT" by pressing  
the PLAY or STOP button. Then, press the  
F.FWD button.  
Yes  
Select the channel to be  
added or deleted.  
Select the current day  
Yes Press the MENU  
button to exit  
3) Select "ENGLISH" , "FRANCAIS" or  
"ESPAÑOL" by pressing the PLAY or STOP  
button. Then, press the C.RESET/EXIT but-  
ton.  
8
To exit the CLOCK SET  
screen.  
• Refer to “Hint for Cable Box or  
Satellite Box” section on page 1.  
No  
4
5
MANUAL SET UP  
CLOCK SET  
No Please wait for a few minutes.  
CHANNEL 30  
ADD  
(CATV)  
MONTH DAY  
0 3 1 5  
YEAR  
2 0 0 4  
or  
/
After scanning...  
• The tuner stops on the lowest memorized  
channel.  
or  
HOUR MINUTE AM/PM  
– – – – – –  
:
You can select only the channels memorized  
Hint  
in VCR by using the CHANNEL buttons.  
Select “ADD” or “DELETE”  
• If "AUTO SET UP" appears on the TV screen  
again, check the cable connections. Then,  
press the F.FWD button once again.  
To go back one step, press the REW button  
(during the steps [2] to [7].)  
Hint  
Select the current year  
• If you accidentally select Spanish or French  
and need English: Press the MENU button  
and choose SELEC. IDIOMA, or SELEC-  
TION LANGUE. Press the F.FWD button,  
and select ENGLISH. Finally, press the  
C.RESET/EXIT button.  
Your clock setting will be lost if there is a  
power failure or if the VCR has been  
unplugged for more than 30 seconds.  
Hint  
C.RESET  
EXIT  
To exit the  
menu.  
Repeat these steps only if there was a  
power failure or if the VCR has been  
unplugged for more than 30 seconds.  
 
- 3 -  
EN  
4. Precautions  
Troubleshooting Guide  
Precautions  
If you are having problems operating your product even though you have followed  
the instructions in this manual, check the following list of problems and corrective  
actions. You may be able to solve the problem yourself.  
Install Location  
Important Copyright Information  
For safety and optimum performance of Unauthorized recording or use of broad-  
your VCR: cast television programming, video tape,  
• Install the VCR in a horizontal and sta- film or other copyrighted material may  
ble position. Do not place anything  
directly on top of the VCR. Do not  
place the VCR directly on top of the TV. thorized duplication, use, or other acts  
• Shield it from direct sunlight and keep which infringe upon the rights of copy-  
it away from sources of intense heat.  
Avoid dusty or humid places. Avoid  
places with insufficient ventilation for  
proper heat dissipation. Do not block  
the ventilation holes on the sides of the  
VCR. Avoid locations subject to strong  
vibration or strong magnetic fields.  
PROBLEM  
CORRECTIVE ACTION  
violate applicable copyright laws. We  
assume no responsibility for the unau-  
No power.  
• Make sure the power plug is connected to an AC outlet.  
• Make sure the power is turned on.  
Timer recording is impossible.  
• Make sure the timer recording is set correctly.  
• Make sure the power is off.  
right owners.  
• Make sure the VCR clock is set correctly.  
Cannot go into Recording mode. • Make sure the tape has a record tab. If needed, cover the hole with  
cellophane tape.  
A Note about Recycling  
This product's packaging materials are  
recyclable and can be reused. Please  
dispose of any materials in accordance  
with your local recycling regulations.  
Batteries should never be thrown away  
or incinerated but disposed of in accor-  
dance with your local regulations con-  
cerning chemical wastes.  
Playback picture is partially noisy. Adjust tracking control for a better picture by pressing the CHANNEL  
buttons.  
No playback picture (only sound  
can be heard.)  
Head cleaning may be necessary. Refer to “Auto Head Cleaning” on  
page 8.  
• Make sure the VCR is not in the Menu mode.  
Avoid the Hazards of Electrical Shock and  
Fire  
• Do not handle the power cord with wet  
hands.  
• Do not pull on the power cord when  
disconnecting it from AC wall outlet.  
Grasp it by the plug.  
No or poor playback picture.  
Turn on the TV and set the TV to channel 3. If channel 3 is already  
occupied for broadcasting, change the RF output to channel 4, and  
change the TV channel to channel 4. (See “RF Output Channel” on  
page 1 for the detail.)  
• Fine tune the channel reception on your TV.  
Note to the Cable TV System Installer  
TV programs cannot be seen nor- • Re-check the ANT. IN and ANT. OUT connections. See page 1.  
This reminder is provided to call the  
Cable TV system installer’s attention to  
Article 820-40 of the National Electrical  
Code, which provides guidelines for  
proper grounding – in particular, specify-  
ing that the cable ground shall be con-  
nected to the grounding system of the  
building, as close to the point of cable  
entry as possible.  
mally.  
• Press the VCR/TV button on the remote control so that the VCR/TV  
indicator on the VCR disappears.  
No VCR operation from the  
infrared Remote Control.  
• Make sure the power plug is connected to an AC outlet.  
• Check batteries in remote control.  
Moisture Condensation Warning  
Moisture condensation may occur inside  
the unit when it is moved from a cold  
place to a warm place, or after heating a  
cold room or under conditions of high  
humidity. Do not use the VCR at least for  
2 hours until its inside is dry.  
Video or color fades in and out when You cannot copy a copyrighted video tape. You are experiencing copy  
making a copy of a video tape.  
guard protection.  
Specifications  
CAUTION:  
Video Heads :  
Operating temperature : 41°F~104°F  
(5°C~40°C)  
Four Heads  
Power requirement : 120V, 60Hz  
Power consumption : 14 Watts  
FCC Warning  
TO PREVENT ELECTRIC SHOCK,  
MATCH WIDE BLADE OF PLUG TO  
WIDE SLOT, FULLY INSERT.  
ATTENTION:  
This equipment may generate or use  
radio frequency energy. Changes or  
modifications to this equipment may  
cause harmful interference unless the  
modifications are expressly approved in  
the instruction manual. The user could  
lose the authority to operate this equip-  
ment if an unauthorized change or modi-  
fication is made.  
Dimensions :  
W 14-3/16” (360mm)  
Converter output :  
VHF Channel 3 or 4.  
H 3-5/8” (92mm)  
D 8-9/16” (216mm)  
4.0 lbs. (1.8 Kg.)  
(approx.)  
POUR ÉVITER LES CHOC  
ÉLECTRIQUES, INTRODUIRE LA  
LAME LA PLUS LARGE DE LA  
FICHE DANS LA BORNE CORRE-  
SPONDANTE DE LA PRISE ET  
POUSSER JUSQU’AU FOND.  
Weight :  
• Designs and specifications are subject to change without notice and legal obligation.  
• If an explanation in the Owner’s Manual is not consistent across languages, please  
refer to the English version.  
 
- 4 -  
EN  
5. Playback  
7. Other Operations  
Before:  
To cue or review picture during play- To play back in slow motion  
1
Turn on the TV and set it to  
channel 3.  
• If channel 3 is already occupied for broad-  
casting, see “RF Output Channel” section.  
back (Picture Search)  
Press the SLOW button during playback  
or the still mode.  
• If the noise bar appears on the TV  
screen, you can reduce it by pressing  
the CHANNEL buttons.  
POWER  
EJECT  
1
VCR/TV  
3
Press the F.FWD or REW button.  
• Press it again and the VCR will now  
search in super high speed. (in the  
LP/SLP modes only)  
4
3
2
5
8
0
CHANNEL  
4
6
WER CHANNEL  
REW  
PLAY  
F.FWD  
MENUREC/OTRSTOP/EJECT  
PN  
n
m
V
b
s
a
SEARCH  
-MODE  
Remote Control TV Screen  
POWER VCR/TV TAPE IN TIMER  
REC  
7
9
2
4
1
3
To freeze the picture on TV screen  
To temporarily stop recording  
C.RESET  
EXIT  
MENU  
SLOW  
during playback (Still mode)  
(Pause mode)  
PLAYB  
PAUSE  
/STILL  
REC/OTR SPEED  
DISPLAY  
Press the PAUSE/STILL button. Each  
Press the PAUSE/STILL button.  
POWER VCR/TV TAPE IN  
time you press the button, the picture will • During the rec pause mode, five  
C
3 2  
4
be forwarded by one frame.  
marks appear on the TV screen. Each  
C
2
• If the picture begins to vibrate vertically  
during the still mode, stabilize the pic-  
ture by pressing the CHANNEL buttons.  
• If the picture is distorted or rolling verti-  
cally, adjust the vertical hold control on  
your TV, if equipped.  
mark represents one minute.  
• Press it again to resume recording.  
Hint  
EJECT  
STOP  
EJECT A  
Auto Rewind  
When a tape without record tab is inserted, the VCR will start playback auto-  
matically at step [1].  
Tracking will be automatically adjusted upon playback. To adjust the tracking manu-  
When a tape reaches its end during play-  
back, fast-forward, or recording (except  
timer recording and One Touch  
Recording), the tape will automatically  
rewind to the beginning. After rewinding  
finishes, the VCR will eject the tape and  
turn itself to off.  
ally, press the CHANNEL buttons.  
Counter Reset  
Press the C.RESET/EXIT button.  
6. Recording & OTR (One Touch Recording)  
Before:  
Hint  
• Still/Slow/Pause mode will be automatically cancelled after 5 minutes to prevent damage to the tape and the  
video head.  
2
Turn on the TV and set it to  
channel 3.  
To return to playback from the Picture Search/Still/Slow mode, press the PLAY button.  
• If channel 3 is already occupied for  
1
4
broadcasting, see “RF Output Channel” section.  
POWER  
EJECT  
1
VCR/TV  
3
8. On-Screen Operations  
6
Remote Control TV Screen  
1
2
1
4
7
2
5
8
0
with tab  
CHANNEL  
4
6
2
5
8
0
3
6
9
1
2
3
4
To call up the main menu  
WER CHANNEL  
REW  
PLAY  
F.FWD  
MENUREC/OTRSTOP/EJECT  
CHANNEL  
n
m
V
PN  
b
s
a
SEARCH  
-MODE  
POWER VCR/TV TAPE IN TIMER  
REC  
7
9
CH12  
-MENU-  
MENU  
C.RESET  
EXIT  
MENU  
SLOW  
B TIMER PROGRAMMING  
AUTO REPEAT [OFF]  
CHANNEL SET UP  
CLOCK SET  
• Select the  
desired channel  
POWER VCR/TV TAPE IN  
PAUSE  
/STILL  
WER CHANNEL  
REW  
PLAY  
F.FWD  
MENUREC/OTRSTOP/EJECT  
REC/OTR SPEED  
DISPLAY  
n
m
V
PN  
b
s
a
4
3
5
POWER VCR/TV TAPE IN TIMER  
REC  
LANGUAGE SELECT  
2
5
6
• Select the desired tape  
speed  
3
SP  
SPEED  
To select an item  
Tape Speed  
Recording/Playback Time  
Type of tape  
SP mode  
SLP mode  
T60  
T120  
2hours  
6hour  
T160  
2-2/3hours  
8hour  
-MENU-  
1
4
2 3  
1hour  
3hour  
or  
TIMER PROGRAMMING  
AUTO REPEAT [OFF]  
B CHANNEL SET UP  
CLOCK SET  
Accidental erasure prevention  
To prevent accidental recording on a record-  
ed cassette, remove its record tab. To record  
on it later, cover the hole with cellophane  
tape.  
REC/OTR  
4
REC  
LANGUAGE SELECT  
REC  
POWER  
To decide  
EJECT  
VCR/TV  
3
You can select a fixed recording time by press-  
ing the REC/OTR button repeatedly.  
1
4
2
5
8
0
Record tab  
CHANNEL SET UP  
CHANNEL  
6
REC  
OTR(0:30)  
OTR(1:00).....  
(Normal recording)  
AUTO SET UP  
SEARCH  
-MODE  
7
9
B MANUAL SET UP  
OTR(8:00)  
OTR(7:30)  
C.RESET  
EXIT  
MENU  
SLOW  
4
3
4 1  
2
PAUSE  
/STILL  
EJECT  
5
6
REC/OTR SPEED  
DISPLAY  
Hint  
STOP  
EJECT A  
To exit the menu  
C.RESET  
EXIT  
MENU  
• If you have connected the VCR to a cable box or satellite box, refer to “Hint for  
Cable Box or Satellite Box” section on page 1.  
OR  
 
- 5 -  
EN  
9. Recording Features  
Timer Recording  
Hint forTimer Recording  
•Insert a tape with its record tab into the VCR.  
• If there is a power failure or the VCR has been unplugged for more than  
30 seconds, the clock setting and all timer settings will be lost.  
• If the tape runs out before the end time, the VCR will switch to the Stop  
mode immediately, eject the tape and the VCR power will be turned off.  
The TIMER indicator will flash.  
-MENU-  
1
ONE TIME PROGRAM  
PROGRAM NUMBER  
5
Select the desired start  
time (hour)  
9
4
B TIMER PROGRAMMING  
AUTO REPEAT [OFF]  
CHANNEL SET UP  
CLOCK SET  
DATE  
0 5 / 0 3 MON  
MENU  
START TIME 0 7 : 3 0 PM  
END TIME 0 8 : 3 0 PM  
ONE TIME PROGRAM  
PROGRAM NUMBER  
DATE 0 5 / 0 3 MON  
START TIME 0 7 : 3 0 – –  
END TIME – – : – – – –  
• If a tape is not in the VCR or does not have the record tab, the TIMER  
indicator flashes and timer recording cannot be performed. Please  
insert a recordable tape.  
or  
LANGUAGE SELECT  
4
or  
CHANNEL  
1 6  
REC SPEED SP  
B SP  
SLP  
When all the Timer Recording are completed, the TIMER indicator flashes. To  
play or eject the recorded tape, press the POWER button first, and then  
press the PLAY or EJECT button.  
CHANNEL  
– –  
Select the desired recording speed  
REC SPEED – –  
C.RESET  
EXIT  
Select the  
minute  
To cancel a Timer Recording that is in progress  
2
PROGRAM NUMBER  
DATE – – / – –  
4
POWER  
Press the STOP/EJECT button on the VCR.  
Copying aVideoTape  
or  
10 Turn off the VCR  
for recording  
START TIME – – : – – – –  
END TIME – – : – – – –  
CHANNEL  
REC SPEED – –  
– –  
or  
• TIMER indicator on the VCR lights up.  
Warning: Unauthorized recordings of copyrighted video tapes  
may be an infringement of copyright laws.  
(Back of TV)  
Hint  
Select an empty program  
number  
(Back of Recording VCR*)  
(Back of Playing VCR)  
To go back one step, press the REW button  
(during the steps [3] to [9].)  
ONE TIME PROGRAM  
PROGRAM NUMBER  
6
4
ANT  
IN  
DATE  
0 5 / 0 3 MON  
2
AUDIO  
OUIN  
VIDEO  
START TIME 0 7 : 3 0 PM  
END TIME – – : – – – –  
OUT  
IN  
AUDIO  
1
OUT  
IN  
VIDEO  
Connect  
To Check, Correct, or Cancel a  
Timer Program  
OUT  
or  
Connect  
CHANNEL  
– –  
REC SPEED – –  
3
4
AM  
PROGRAM NUMBER  
4
1) Turn the power on by pressing  
B PM  
RF Cable  
(supplied)  
B ONCE  
DAILY  
WEEKLY  
the POWER button.  
Select “AM” or “PM”  
Audio/Video Cables  
(not supplied)  
2) Select main menu by pressing  
the MENU button.  
*Front input jacks are also available  
or  
1) Insert a pre-recorded tape into the playing VCR.  
2) Insert a tape with its record tab into the recording VCR.  
3) Select "TIMER PROGRAM-  
MING" by pressing the PLAY or  
STOP button. Then, press the  
F.FWD button.  
7
8
Repeat the procedure in steps  
5 and 6 to set the end time.  
Select “ONCE”, “DAILY”  
(Mon-Fri), or “WEEKLY”  
3) Press the SPEED button on the remote control of the recording VCR  
to select the desired recording speed (SP/SLP).  
4) Select the program number  
which you want to check by  
pressing the PLAY or STOP but-  
ton. The details of the program  
you selected will appear on the  
TV screen.  
• Go to the digit you want to  
change by pressing the F.FWD  
or REW button. Then, enter cor-  
rect numbers by pressing the  
PLAY or STOP button.  
You may cancel the entire pro-  
gram by pressing the REW but-  
ton while the program number  
flashes.  
5) Press the C.RESET/EXIT button  
to exit.  
6) Press the POWER button to  
return to timer stand-by mode.  
4) Select the “L1” or “L2”position on the recording VCR.  
To use the input jacks on the back of the VCR, select "L1" position by  
pressing [0], [0], [1] on the remote control or the CHANNEL buttons.  
ONE TIME PROGRAM  
Select the desired month  
To use the input jacks on the front of the VCR, select "L2" position by  
PROGRAM NUMBER  
4
ONE TIME PROGRAM  
pressing [0], [0], [2] on the remote control or the CHANNEL buttons.  
DATE 0 5 / 0 3 MON  
START TIME 0 7 : 3 0 PM  
END TIME 0 8 : 3 0 PM  
PROGRAM NUMBER  
DATE 0 5 / 0 3 MON  
4
5) Press the REC/OTR button on the recording VCR.  
or  
START TIME – – : – – – –  
END TIME – – : – – – –  
or  
6) Begin playback of the tape in the playing VCR.  
CHANNEL  
1 6  
REC SPEED – –  
7) To stop recording, press the STOP/EJECT button on the recording  
CHANNEL  
– –  
REC SPEED – –  
VCR, then stop playback of the tape in the playing VCR.  
Select the desired channel  
Hint  
If you have connected the VCR to a cable  
box or satellite box as the Connection A  
on page 1, select the VCR to channel 3 or  
4 (the RF output channel of the VCR).  
Then, select the desired channel at the  
cable box or satellite box. Leave the cable  
box or satellite box on for timer recording.  
Select the desired day  
• For best results during dubbing, use the VCR’s front panel controls whenever possible. The  
remote control might affect the playing VCR’s operation.  
or  
• Always use a video-quality shielded cable with RCA-type connectors. Standard audio cables are  
not recommended.  
You can use a video disc player, satellite receiver, or other audio/video component with A/V out-  
puts in place of the playing VCR.  
You can program one  
year in advance.  
• “L1” or “L2” is found before the lowest memorized channel. (Example: CH02)  
- 6 -  
 
EN  
10. Special Features  
Time Search  
Index Search  
Auto Repeat  
You can repeat playback of a  
whole tape automatically.  
You can specify the time for  
fast forwarding or rewinding.  
You can specify the number of  
programs to be skipped.  
• Insert a tape into the VCR.  
• Insert a tape into the VCR.  
• Insert a tape into the VCR.  
1
MENU  
-MENU-  
1
INDEX SEARCH  
SEARCH  
1
TIME SEARCH  
– –  
-MODE  
TIMER PROGRAMMING  
B AUTO REPEAT [OFF]  
CHANNEL SET UP  
SEARCH  
– : – –  
-MODE  
CLOCK SET  
LANGUAGE SELECT  
x1 (Once)  
x2 (Twice)  
or  
2
INDEX SEARCH  
0 3  
2
Select the desired length  
of time for fast forwarding  
or rewinding  
or  
-MENU-  
2
TIME SEARCH  
2 : 5 0  
TIMER PROGRAMMING  
B AUTO REPEAT [ON]  
CHANNEL SET UP  
CLOCK SET  
01 ~ 20  
CURRENT PROGRAM  
Beginning  
End  
LANGUAGE SELECT  
or  
of tape  
of tape  
Pro.1 Pro.2 Pro.3 Pro.4 Pro.5  
02 01 01 02 03  
INDEX MARK  
0:01~ 9:59  
(1 minute~9 hours  
and 59 minutes)  
3
AUTO REPEAT B  
To rewind  
To fast forward  
3
4
To rewind  
To fast forward  
After searching,  
3
4
Hint  
To cancel Auto Repeat, follow steps [1]-[2]  
above. Then, press the F.FWD button so  
that [OFF] appears beside AUTO REPEAT.  
Press the C.RESET/EXIT button to exit.  
After searching,  
• If menu remains on the TV screen at step  
[3], press the C.RESET/EXIT button to exit.  
PLAYB  
PLAYB  
Hint  
• The VCR records an index mark at the  
beginning of the recording when you make  
a recording. There should be time gap  
between index marks for the Index Search.  
Hint for Timer Search & Index Search  
• These functions are not available during recording.  
• Press the STOP button to stop the search.  
• If the end of the tape is reached during a Search, the VCR will cancel the search and rewind the  
tape.  
 
- 7 -  
EN  
11. Information  
HOME ENTERTAINMENT WARRANTY  
Maintenance  
We appreciate your purchase of a SYLVANIA  
Home Entertainment product. We take pride in  
the quality of our products and have manufac-  
tured your new Home Entertainment unit to  
exacting quality standards. We feel confident  
that in normal use, it will provide you with satis-  
factory performance. However, should you expe- environmental conditions, improper unauthorized  
rience difficulty, you are protected under the pro- service, improper maintenance, modifications or  
visions of this warranty.  
SYLVANIA Home Entertainment products are  
warranted against manufacturing defects in  
materials and workmanship in normal use for the This Home Entertainment product is only war-  
following periods from the date of purchase by ranted to the original retail purchaser. This war-  
the original user, and is conditional upon the unit ranty becomes void in the event of commercial or  
being installed and used as directed in the  
instruction manual.  
handling, transportation, unpacking, set-up,  
installation, customer adjustments that are cov-  
ered in the instruction book, repair or replace-  
ment of parts supplied by other than the SYLVA-  
NIA authorized service depot, any malfunction or  
failure caused by or resulting from abnormal  
Servicing  
Auto Head Cleaning  
Should your VCR become inoperative, do not • Automatically cleans video heads as you insert or  
try to correct the problem by yourself. There remove a cassette, so you can see a clear picture.  
are no user-serviceable parts inside. Turn off, • Playback picture may become blurred or interrupt-  
unplug the power plug, and please call our  
help line mentioned on page 1 to locate an  
Authorized Service Center.  
ed while the TV program reception is clear. Dirt  
accumulated on the video heads after long peri-  
ods of use, or the usage of rental or worn tapes  
can cause this problem. If a streaky or snowy pic-  
ture appears during playback, the video heads in  
your VCR may need to be cleaned.  
1. Please visit your local Audio/Video store and pur-  
chase a good quality VHS Video Head Cleaner.  
2. If a Video Head Cleaner does not solve the  
problem, please call our help line mentioned on  
page 1 to locate an Authorized Service Center.  
NOTES:  
repair by the consumer, abuse, misuse, neglect,  
accident, fire, flood, or other Acts of God, and  
incorrect line voltage.  
Cabinet Cleaning  
• Wipe the front panel and other exterior sur-  
faces of the VCR with a soft cloth immersed  
in lukewarm water and wrung dry.  
• Never use a solvent or alcohol. Do not spray  
insecticide liquid near the VCR. Such chemi-  
cals may cause damage and discoloration to  
the exposed surfaces.  
rental use. This warranty becomes void in the  
event serial numbers are altered, defaced or  
removed.  
SYLVANIA reserves the right to make changes in  
design or to make additions to or improvements  
upon this product without incurring any obligation  
to install the same on products previously manu-  
factured. The foregoing is in lieu of all other war-  
ranties expressed or implied and SYLVANIA nei-  
ther assumes nor authorizes any person to  
Product  
Parts and Labour  
1 Year  
V.C.R.  
• Remember to read the instructions included with  
the video head cleaner before use.  
• Clean video heads only when problems occur.  
Video Head  
Remote Control  
6 Months  
90 Days  
SYLVANIA’s obligation under this warranty shall  
be limited to the repair, including all necessary  
parts and the cost of the labour connected there- assume for it any other obligation or liability in  
with, or at our option the exchange of any Home connection with the sale or service of this prod-  
Entertainment product which shows evidence of uct. In no event shall SYLVANIA or its SYLVA-  
a manufacturing defect within the warranty peri-  
od.  
Replacement parts, furnished in connection with for any delay in the performance of this warranty  
Instrucciones en Español  
PREPARACIÓN DEL RELOJ  
PREPARACIÓN DE CANALES  
(La antena o la caja de televisión por  
cable deberá estar conectada)  
NOTES: Cuando utilice su nueva  
videograbadora por primera vez, o en el  
caso de ser necesario después de pro-  
ducirse un fallo en la alimentación, la  
videograbadora se pondrá inicialmente en el  
modo de preajuste cuando se pulse  
[POWER].  
1. Encienda el televisor y ponga el televisor  
en el canal 3.  
2. Pulse [POWER] para encender la  
videograbadora.  
1. Pulse [MENU] hasta que aparezca el  
menú principal. (Si el reloj no está puesto  
en hora y se pulsa [MENU], el menú  
AJUSTE DE RELOJ aparece en primer  
NIA dealers be liable for special or consequential  
damage arising from the use of this product, or  
this warranty shall be warranted for a period  
equal to the unexpired portion of the original  
equipment warranty.  
due to cause beyond our control.  
The purchaser may have other rights under exist-  
ing provincial or federal laws, and where any  
terms of this warranty are prohibited by such  
laws, they are deemed null and void, but the  
remainder of the warranty shall remain in effect.  
lugar. En este caso, siga el paso 3.)  
2. Pulse [PLAY] o [STOP] para indicar a  
"AJUSTE DE RELOJ". Luego, pulse [F.FWD].  
3.  
CUSTOMER OBLIGATIONS  
This warranty applies to the product from the  
original date of purchase at retail. Therefore, the  
owner must provide a copy of the original, dated  
bill of sale. No warranty service will be per-  
formed without a bill of sale. Transportation to  
Pulse repetidamente [PLAY] o [STOP].  
Luego, pulse [F.FWD].  
Ajuste el mes.  
Ajuste el día.  
HOW TO OBTAIN SERVICE  
Should this product require service, you may  
obtain specific information on how to obtain ser-  
Pulse repetidamente [PLAY] o [STOP].  
Luego, pulse [F.FWD].  
Pulse repetidamente [PLAY] o [STOP].  
Luego, pulse [F.FWD].  
Ajuste el año.  
Ajuste la hora.  
and from the service depot is the responsibility of vice by contacting the SYLVANIA Dealer from  
the owner.  
3. Seleccione "ENGLISH",  
"FRANCAIS"(French)  
o "ESPAÑOL"  
(Spanish) pulsando  
whom this product was purchased, or by contact-  
ing us directly:  
Pulse repetidamente [PLAY] o [STOP].  
Luego, pulse [F.FWD].  
SELEC. IDIOMA  
WARRANTY EXCLUSIONS  
Ajuste el minuto. Pulse repetidamente [PLAY] o [STOP].  
Luego, pulse [F.FWD].  
ENGLISH  
This warranty is extended to SYLVANIA Home  
Entertainment products purchased and used in  
Canada. This warranty shall not apply to appear-  
ance or accessory items including but not limited  
to: cabinet, cabinet parts, batteries, connecting  
cables, tapes. This warranty shall, in addition,  
not apply to cleaning video/audio heads, pinch  
rollers, tape transport system damages due to  
SONIGEM SERVICE  
300 Alden Road  
Markham, Ontario  
L3R 4C1  
PHONE: (905) 940-5089  
FAX: (905) 940-2303  
1-800-287-4871  
FRANCAIS  
Ajuste la  
mañana (AM) o  
[PLAY] o [STOP]. Y  
Pulse repetidamente [PLAY] o [STOP].  
B ESPAÑOL  
[ON]  
luego pulse [F.FWD].  
4. Pulse una vez  
[F.FWD].  
la tarde (PM).  
AJUSTE DE RELOJ  
MES  
03  
DIA  
15 LUN  
AÑO  
2004  
/
• Para volver atrás un  
paso, pulse [REW].  
4. Pulse [F.FWD] para  
poner en fun-  
El sintonizador explora  
HORA MINUTO AM/PM  
y memoriza todos los canales activos de su  
zona. Tras la exploración, el sintonizador se  
detiene en el canal memorizado más bajo.  
05  
:
40  
PM AM  
BPM  
cionamiento el reloj.  
 
- 8 -  
EN  

Shark Vacuum Cleaner V1950 User Manual
Shibaura Lawn Mower ST445 User Manual
Sony Car Speaker SRS NWGM30 User Manual
Sony Car Stereo System CDX M9900 User Manual
Sony DVD VCR Combo SLV D370P User Manual
Sony Laptop PCG C1XS User Manual
Sony Satellite Radio STR DN1030 User Manual
Southern Telecom Tablet PTAB750 User Manual
Speco Technologies Security Camera CVC 6805EX User Manual
Stanton CD Player C503 User Manual