Planning Information
Integrated Induction Cooktop
M O D E L C T 1 5 I / S
Two induction
elements
Illuminated electronic
touch controls
Model CT15I/S
Classic Stainless Steel
Lock key and
universal off
HIGH
OFF ON
HI-POWER
T
MEL
H
G
I
H
N
O
F
F
O
M
I
O
S
F
F
O
True Simmer and melt
on both elements
Classic stainless
steel trim finish
Location of
rating plate
While induction cooking is new to North America, it
has been used in Europe for decades by professionals
and homeowners demanding the best in performance.
The Wolf Model CT15I/S 15" (381)
integrated induction cooktop is available
with classic stainless steel trim finish.
Cooking with this sleek 15-inch powerhouse is simply
the best way to cook. Electricity flows through a coil to
produce a magnetic field under the sleek black ceramic
top. When an iron or magnetic stainless steel pan is
placed on the surface, the magnetic field creates a
current in the pan, exciting the molecules and heating
the pan and not the cooktop. That's why the cooktop
stays cool to the touch and the food cooks efficiently.
In fact this unit is so efficient that it outperforms gas
and electric cooktops. There is no wasted heat because
energy is supplied directly to the cooking vessel so
nearly 90 percent of the energy gets used to cook.
You can keep sauces and chocolates melted at 50
watts of power, or with the touch of a finger, activate
the Hi-Power boost feature and boil water in half the
time you normally do.
The Wolf induction cooktop has it all.
Dimensions in parentheses are in
millimeters unless otherwise specified.
1
7/06
Planning Information
Integrated Induction Cooktop
M O D E L C T 1 5 I / S
S P E C I F I C A T I O N S
Overall Cooktop Width
Overall Cooktop Height
Overall Cooktop Depth
Cooktop Cut-Out Width
Cooktop Cut-Out Depth
Minimum Cabinet Depth
Minimum Height Clearance
Element Maximum Power
15" (381)
21/2" (64)
21" (533)
Model CT15I/S
Classic Stainless Steel
133/8" (340)
191/4" (489)
223/4" (578)
6" (152)
M O D E L O P T I O N
Classic Stainless Trim
CT15I/S
(front) 1800 W
(rear) 2200 W
V E N T I L A T I O N O P T I O N S
Electrical Supply Requirements
240/208 V AC, 60 Hz
20 amp dedicated circuit
30" (762) Cooktop or Pro wall
hood or liner
Conduit
4 ft (1.2 m) flexible 3-wire
30" (762) or 45" (1143) downdraft
ventilation system
Electrical Rating
3.4 kW at 240 V
2.6 kW at 208 V
36" (914) Cooktop or Pro island
hood
Shipping Weight
30 lbs (14 kg)
Special Note
Cooktop can be installed in combination
with other cooktops or modules
For additional information, refer to the
Wolf Cooktop Ventilation or Pro
Ventilation sections of our website,
wolfappliance.com.
Specifications are subject to change without notice.
A C C E S S O R I E S
Filler strip
Bracket supports for installation
of two integrated modules with
downdraft (Model DD30 only)
Accessories are available through your
Wolf dealer. To obtain local dealer
information, visit the Locator section of
our website, wolfappliance.com.
Dimensions in parentheses are in
millimeters unless otherwise specified.
3
Planning Information
Integrated Induction Cooktop
M O D E L C T 1 5 I / S
I N S T A L L A T I O N S P E C I F I C A T I O N S
33" (838) RECOMMENDED
CABINET WIDTH
13" max
(330)
30" (762)
18"
2"*min (51)
COUNTERTOP TO
COMBUSTIBLE
MATERIALS
3
(457)
CUT-OUT TO
13 /8" (340)
1
19 /4" (489)
2"**
COMBUSTIBLE COOKTOP CUT-OUT
1
(64) COOKTOP CUT-OUT
DEPTH
2 /2"min
MATERIALS
(BOTH SIDES)
WIDTH
ABOVE COOKTOP
(64)
6"
(152)
36" (914)
E
15"
STANDARD
FLOOR TO
COUNTERTOP
HEIGHT
(381)
15"
(381)
NOTE: Application shown allows for installation of two 15" (381) modules side-by-side with 33" (838) recommended cabinet width. 18" (457)
recommended cabinet width for installation of single 15" (381) cooktop or module. *Minimum clearance from both side edges of cooktop cut-out
to combustible materials up to 18" (457) above countertop. **Minimum clearance from rear edge of cooktop cut-out to combustible materials up
to 18" (457) above countertop.
3
13 /8" (340)
COOKTOP CUT-OUT
WIDTH
1
19 /4" (489)
COOKTOP
CUT-OUT DEPTH
1
2 /2"min
(64)
FRONT OF COUNTERTOP
D I M E N S I O N S
Cooktop Cut-Out Width
Cooktop Cut-Out Depth
Minimum Height Clearance
Minimum Cabinet Depth
Location of Electrical
133/8" (340)
191/4" (489)
6" (152)
223/4" (578)
Within shaded area
See Installation Instructions shipped with unit for detailed specifications.
Dimensions in parentheses are in
millimeters unless otherwise specified.
4
Planning Information
Integrated Induction Cooktop
M O D E L C T 1 5 I / S
I N S T A L L A T I O N N O T E S
Refer to the illustrations and specifications
for overall dimensions, cut-out dimensions and
installation specifics.
A Wolf downdraft system, Cooktop or
Pro ventilation hood is recommended. When
installing a ventilation hood, refer to the specific
requirements of the hood for the minimum
dimension to countertop. Also refer to Ventila-
tion Recommendations in the Cooktop Ventila-
tion or Pro Ventilation sections of our website,
wolfappliance.com.
Wolf recommends using 33" (838) wide
cabinets for installation of two 15" (381)
modules side by side. An 18" (457) wide
cabinet is recommended for installation of a
single 15" (381) cooktop or module.
The Wolf 15" (381) integrated induction
cooktop requires a separate, grounded 3-wire
240/208 V AC, 60 Hz, 20 amp service with its
own circuit breaker. It has a 4' (1.2 m) flexible
3-wire conduit for connection at the electrical
supply. Locate electrical within the shaded area
shown in the Installation illustration on page 4.
IMPORTANT NOTE: Review specific installation
instructions for product to product capabilities
If the 15" (381) integrated induction cooktop
is to be used with any combination of addi-
tional cooktop units or modules with a filler
strip, the cut-out width increases to 14" (356).
When multiple cooktops or modules are
installed side by side, refer to the countertop
cut-out dimensions on page 6.
You must follow all National Electrical Code
regulations. In addition, be aware of local codes
and ordinances when installing your service.
IMPORTANT NOTE: A minimum height
clearance of 6" (152) is required. If a shelf is
installed below the unit, a 1" (25) gap at the
rear of the cabinet shelf is necessary to allow
for proper ventilation. Failure to do so could
result in decreased performance or product
damage.
Refer to the installation instructions
shipped with each Wolf product for detailed
specifications.
This cooktop is intended for indoor use only.
Dimensions in parentheses are in
millimeters unless otherwise specified.
5
Planning Information
Integrated Induction Cooktop
M O D E L C T 1 5 I / S
I N T E G R A T E D M O D U L E S —
M U LT I P L E U N I T I N S T A L L A T I O N
With Wolf's integrated modules, you have the
ultimate in customization. You can create your
own design by mixing and matching the various
components within this system. And when you
couple these modules with other cooktops
within the Wolf inventory you and your client will
truly understand freedom of choice.
IMPORTANT NOTE: Where multiple cooktops
and/or modules are installed side by side, each
unit must have its own separate recommended
electrical circuit. When multiple gas cooktops
and/or modules are installed next to one
another, they can receive their gas supply from a
common line. However, each unit must have its
own regulator installed between the mainline
and the cooktop or module.
Some Wolf integrated modules can be installed
together or with a 30" (762) or 36" (914)
cooktop. When multiple units are installed side
by side, the cut-out dimensions that are shown
in the illustration are derived by adding 11/4" (32)
additional space for each additional unit, to give
you your total cut-out width. Refer to the illus-
tration below for countertop cut-out dimensions
for installation of multiple cooktops.
When two or more cooktops or modules are
installed together, an integrated module filler
strip is recommended. Contact your Wolf dealer
for information on this accessory component.
For electrical requirements, additional specifica-
tions and installation limitations, refer to the
Installation Notes on page 5.
IMPORTANT NOTE: Refer to the pages for each
specific integrated module for installation
limitations.
IMPORTANT NOTE: Review specific installation
instructions for product to product capabilities.
3
59 /4
"
(1518) FOUR MODULES WIDTH OR
1
59 /2 (1511) 30" COOKTOP AND TWO MODULES OR
"
1
50 /4
"
(1276) 36" COOKTOP AND ONE MODULE
1
44 /2
"
(1130) THREE MODULES WIDTH OR
(1124) 30" COOKTOP AND ONE MODULE
1
44 /4
"
1
29 /4 (743)
"
TWO MODULES WIDTH
1
14"
(356)
19 /4"
(489)
CUT-OUT
WIDTH
CUT-OUT
DEPTH
1
(64)
2 /2"min
FRONT OF COUNTERTOP
Countertop cut-out dimensions for installation of multiple cooktop units.
Dimensions in parentheses are in
millimeters unless otherwise specified.
6
|