StarTechcom Network Card ZIF2CF User Manual

Instruction Manual  
1.8in ZIF LIF to Single Compact Flash SSD Adapter Card  
ZIF2CF  
Compact Flash  
Connector  
DE: Bedienungsanleitung - de.startech.com  
FR: Guide de l'utilisateur - fr.startech.com  
ES: Guía del usuario - es.startech.com  
IT: Guida per l'uso - it.startech.com  
NL: Gebruiksaanwijzing - nl.startech.com  
PT: Guia do usuário - pt.startech.com  
ZIF/LIF Connector  
Packaging Contents  
• Compact Flash to ZIF/LIF Adapter  
• Instruction Manual  
ZIF/LIF Pin #1  
Marker  
*actual product may vary from photos  
Installation  
WARNING! Computer equipment can be severely damaged by static electricity. Be sure that you are properly grounded before opening  
your computer case or touching your hard drive. StarTech.com recommends that you wear an anti-static strap when installing any  
computer component. If an anti-static strap is unavailable, discharge yourself of any static electricity build-up by touching a large  
grounded metal surface (such as the computer case) for several seconds. Be sure to handle your hard drive carefully and consult your hard  
drive and laptop manufacturer for details on how to remove the drive.  
WARNING! The ZIF2CF adapter does not support hot-swapping. Please ensure that the host computer is powered down when connecting  
or disconnecting the Compact Flash card to or from the adapter. Similarly, please ensure that the host computer is powered down when  
connecting/removing the adapter, when a Compact Flash card is connected to the adapter.  
Please note: To simplify installation, power down the computer or ZIF/LIF device into which the adapter will be installed, and remove the  
existing ZIF/LIF device.  
1. With the Compact Flash card label facing upward (visible), align the holes on the connector end of the  
Compact Flash card you wish to install, with the pins provided by the by ZIF2CF adapter.  
2. Apply gentle pressure to the Compact Flash card, until the pins provided by the adapter are fully inserted  
into the adapter connector holes.  
3. Gently, lift the brown lever from the ZIF/LIF connector on ZIF2CF, and insert the ZIF/LIF cable from the  
device/computer into the ZIF2CF ZIF/LIF connector, such that Pin #1 on the the ZIF/LIF cable is aligned  
with Pin #1 on the ZIF/LIF connector provided by the ZIF2CF adapter (denoted by white arrow).  
Manual Revision: 10/28/2011  
 

Sharp Calculator EL2630PIII User Manual
Sharp Fax Machine FO 5700U User Manual
SMSC Switch LPC47S45x User Manual
Sony Camcorder PJ410 User Manual
Sony Computer Monitor GDM 400PST9 User Manual
Sony DVR DCR TRV75 User Manual
Spalding Fitness Equipment M300011 User Manual
Sunbeam Microwave Oven SMW736 User Manual
Swann Security Camera SWA31 C4 User Manual
Tannoy Cell Phone W395 User Manual