StarTechcom Network Cables ICUSB1284D25 User Manual

Instruction Manual  
6 ft. USB to DB25 Parallel Printer Adapter Cable  
ICUSB1284D25  
DE: Bedienungsanleitung - de.startech.com  
FR: Guide de l'utilisateur - fr.startech.com  
ES: Guía del usuario - es.startech.com  
IT: Guida per l'uso - it.startech.com  
NL: Gebruiksaanwijzing - nl.startech.com  
PT: Guia do usuário - pt.startech.com  
*actual product may vary from photos  
Packaging Contents  
Setting Up a Printer Device  
• 1 x USB to Parallel Printer Cable  
• 1 x Driver CD  
1. Turn off your printer. Plug the DB25 connector of the USB to  
Parallel Printer cable into your printer or printer cable.  
2. Turn your printer and computer on.  
• 1 x Instruction Manual  
3. Plug the USB connector of the cable into the USB port of your  
computer.  
4. If you have already installed a printer device before clickStart,  
“Settings,Printers. Right-click the default installed printer and  
click onProperties. The properties dialog box of the installed  
printer will appear on your screen.  
5. Click the details folder tab and change the printer port to  
LPT2:USB to Parallel Port (Win98SE) or USB001 (WinXP *Note that  
there may be other USB00x ports, so you may need to try each  
one).  
6. If you do not have a printer installed yet, clickStart,Settings,  
“Printers,Add Printer. The Add Printer Wizard will start and  
assist you in installing a new printer device. Select the printer  
manufacturer and model name from the list provided by the  
wizard or use the driver disk supplied with your printer.  
7. When prompted which port the printer will use, click on LPT2:USB  
to Parallel Port (Win98SE) or USB001 (WinXP *Note that there may  
be other USB00x ports, so you may need to try each one).  
System Requirements  
• Intel-compatible 486DX-66 MHz CPU or higher with an available  
USB port  
• Microsoft® Windows® 98SE/ME/2000/XP/Vista/7 (32/64-bit)  
• CD/DVD-ROM drive (Win98SE installation only)  
Installation  
Please note: Installation on a computer that is running  
Windows 2000 or later is automated. If you are using a prior  
release, such as Windows 98SE, the included driver CD  
contains the files needed for successful installation.  
Windows 98SE  
1. Insert the Driver CD into the CD/DVD-ROM drive.  
2. Connect the USB to Parallel Printer cable into an available USB  
port. Do not have the printer connected to the cable yet.  
3. Windows will detect the adapter and prompt for drivers.  
4. Select theUSB IEEE-1284 Bridgefolder on the CD as the location  
to search.  
Specifications  
Bus Interface  
USB 1.x  
5. Windows will automatically install the drivers from the CD.  
1 x USB type A male  
1 x 25-pin D-Sub (DB25) female  
Connectors  
Maximum Data Transfer Rate  
Power Adapter  
1.5Mbps  
USB powered  
Windows 2000/XP/Vista  
1. Connect the USB to Parallel Printer cable into an available USB  
port. Do not have the printer connected to the cable yet.  
2. Windows will detect that the cable has been connected, and  
install the necessary software automatically.  
Operating Temperature  
Storage Temperature  
Humidity  
5°C ~ 40°C (41°F ~140°F)  
-20°C ~ 70°C (-4°F ~ 158°F)  
0% ~ 80% RH  
Cable Length  
1.8m / 6ft  
Windows® 98SE/ME/2000/XP/  
Vista/7 (32/64-bit)  
Operating System Support  
Manual Revision: 10/21/2011  
 

Shure Musical Instrument ULX User Manual
Sony Can Opener DCR SR37E User Manual
Sony Computer Drive SMPU10 User Manual
Sony Headphones DR EX14VP User Manual
Sony Microcassette Recorder 4 166 309 111 User Manual
Spirit Treadmill IN300T User Manual
Stiga Trimmer SH 60 User Manual
Sunrise Medical Mobility Aid P 222 User Manual
Swann Security Camera Professional CCTV Camera User Manual
Sylvania Tablet Accessory 76 009 DA User Manual