Contractor Series Amplifiers
PBM60
60 Watts RMS P.A. Amplifier
PBM120 120 Watts RMS P.A. Amplifier
Our UL Listed Contractor Series amplifiers are the ideal amplifiers for everyday use. They can stand on their
own as part of a smaller installation, or be incorporated into a much larger job. With RMS power ranging from
30W to 120W, microphone and source mixing ability, telephone paging interface and music-on-hold
capability, there is almost no job that these amplifiers cannot be a part of.
Specifications
• Three MIC inputs (terminal strip)
• 1 XLR connector
• Aux input
• Front panel level controls
• Auto mute function
• Bass/treble tone controls
• Outputs 70/25V and 4/8/16 Ohms
• Auto summing stereo AUX input
• Music-on-hold output with separate level control (600 Ohms line and one Watt 8 Ohms)
• 600 Ohms tel. line input with level control
• Manual muting contacts
• Accessory AC outlet
• UL & CSA listed
• Dimensions: 17” x 3.75” x 11.25”
Rack mounting kit available (sold separately): PBMRK2
Specifications subject to change
For more information contact us at:
Toll Free: 1-800-645-5516 In Metro NY: 631-957-8700 Fax: 631-957-9142 or 631-957-3880
|