Sony Stereo System XL HF200PBK User Manual

ENGLISH  
MODEL  
(
)
XL-HF200P BK  
HI FI COMPONENT SYSTEM  
OPERATION MANUAL  
XL-HF200P(BK) Hi Fi Component System consisting of XL-HF200P(BK) (main unit) and CP-HF200 (speaker system).  
R
RMCGA232AWSA  
iPhone, iPod, iPod classic, iPod nano, and  
are trademarks of Apple Inc.,  
iPod touch  
registered in the U.S. and other countries.  
“Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically  
to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple  
is not responsible for the operation of this device or its compliance with safety and regulatory standards.  
Accessories  
Please confirm that the following accessories are included.  
A
S
W
A
2
3
2
A
G
C
M
R
R
iPhone® adaptor x 2  
(GCOVAA238AWSA - No 12) (RRMCGA244AWSA)  
(GCOVAA239AWSA - No 15)  
Remote control x 1  
AM loop antenna x 1  
(QANTL005AWZZ)  
FM antenna x 1  
(FANT1535A)  
Speaker wires x 2  
(QCNWHA033AWPZ)  
Special Note  
Supply of this product does not convey a license nor imply any right to distribute content created with this product in  
revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), revenue generating  
streaming applications (via Internet, intranets and/or other networks), other revenue-generating content distribution  
systems (pay-audio or audio-on-demand applications and the like) or on revenue-generating physical media (compact  
discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like). An independent license for  
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.  
Printed in Malaysia  
10H R AS 1  
 
TINSZA718AWZZ  
IMPORTANT SAFETY INSTRUCTIONS (continued)  
11) Only use attachments/accessories specified by the  
manufacturer.  
20) Safety Check - Upon completion of any service or  
repairs to this product, ask the service technician to  
perform safety checks to determine that the product is  
in proper operating condition.  
12) Use only with the cart, stand, tripod,  
bracket, or table specified by the  
manufacturer, or sold with the apparatus.  
When a cart is used, use caution when  
moving the cart/apparatus combination  
to avoid injury from tip-over.  
21) Wall or ceiling mounting - When mounting the product  
on a wall or ceiling, be sure to install the product  
according to the method recommended by the  
manufacturer.  
13) Unplug this apparatus during lightning storms or when  
unused for long periods of time.  
22) Power Lines - An outside antenna system should not  
be located in the vicinity of overhead power lines or  
other electric light or power circuits, or where it can  
fall into such power lines or circuits. When installing  
an outside antenna system, extreme care should  
be taken to keep from touching such power lines or  
circuits as contact with them might be fatal.  
23) Outdoor Antenna Grounding - If an outside antenna  
or cable system is connected to the product, be sure  
the antenna or cable system is grounded so as to  
provide some protection against voltage surges and  
built-up static charges. Article810 of the National  
Electrical Code, ANSI/NFPA 70, provides information  
with regards to proper grounding of the mast and  
supporting structure, grounding of the cord-in wire to  
an antenna discharge unit, connection to grounding  
electrodes, and requirements for the grounding  
electrode.  
14) Refer all servicing to qualified service personnel.  
Servicing is required when the apparatus has been  
damaged in any way, such as power-supply cord or  
plug is damaged, liquid has been spilled or objects  
have fallen into the apparatus, the apparatus has  
been exposed to rain or moisture, does not operate  
normally, or has been dropped.  
Additional Safety Information  
15) Power Sources - This product should be operated  
only from the type of power source indicated on the  
marking label. If you are not sure of the type of power  
supply to your home, consult your product dealer or  
local power company. For product intended to operate  
from battery power, or other sources, refer to the  
operating instructions.  
16) Overloading - Do not overload wall outlets, extension  
cords, or integral convenience receptacles as this can  
result in a risk of fire or electric shock.  
17) Object and Liquid Entry - Never push objects of any  
kind into this product through openings as they may  
touch dangerous voltage points or short-out parts that  
could result in a fire or electric shock. Never spill liquid  
of any kind on the product.  
18) Damage Requiring Service - Unplug this product from  
the wall outlet and refer servicing to qualified service  
personnel under the following conditions:  
Example of antenna grounding asper  
National Electrical Code, ANSI/NFPA 70  
ANTENNA CORD IN WIRE  
GROUND  
CLAMP  
ANTENNA DISCHARGE UNIT  
(NEC SECTION 810-20)  
ELECTRIC  
SERVICE  
EQUIPMENT  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
GROUND CLAMPS  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ART250, PARTH)  
a) When the AC cord or plug is damaged,  
b) If liquid has been spilled, or objects have fallen  
into the product,  
NEC - NATIONAL ELECTRICAL CODE  
S2898A  
24) Protective Attachment Plug - The product is equipped  
with an attachment plug having overload protection.  
This is a safety feature. See Instruction Manual  
for replacement or resetting of protective device.  
If replacement of the plug is required, be sure the  
service technician has used a replacement plug  
specified by the manufacturer that has the same  
overload protection as the original plug.  
25) Stand - Do not place the product on an unstable  
cart, stand, tripod or table. Placing the product on an  
unstable base can cause the product to fall, resulting  
in serious personal injuries as well as damage to the  
product. Use only a cart, stand, tripod, bracket or  
table recommended by the manufacturer or sold with  
the product. When mounting the product on a wall,  
be sure to follow the manufacturer’s instructions. Use  
only the mounting hardware recommended by the  
manufacturer.  
c) If the product has been exposed to rain or water,  
d) If the product does not operate normally by  
following the operating instructions. Adjust only  
those controls that are covered by the operating  
instructions as an improper adjustment of other  
controls may result in damage and will often  
require extensive work by a qualified technician  
to restore the product to its normal operation,  
e) If the product has been dropped or damaged in  
any way, and  
f) When the product exhibits a distinct change in  
performance - this indicates a need for service.  
19) Replacement Parts - When replacement parts are  
required, be sure the service technician has used  
replacement parts specified by the manufacturer or  
have the same characteristics as the original part.  
Unauthorized substitutions may result in fire, electric  
shock, or other hazards.  
E-2  
 
For U.S. customer only  
CONSUMER LIMITED WARRANTY  
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the  
"Product"), when ship in its original container, will be free from defective workmanship and materials, and agrees that it will,  
at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent  
at no charge to the purchaser for parts or labor for the period(s) set forth below.  
This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below  
nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or  
other misuse, abnormal service or handling, or which has been altered or modified in design or construction.  
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide  
proof of purchase to the servicer.  
The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law.  
ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE  
LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do not allow  
limitations on how long an implied warranty lasts, so the above limitation may not apply to you.  
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those  
described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp.  
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and  
exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described  
herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the  
Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise.  
In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused  
by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any  
way responsible for any incidental or consequential economic or property damage. Some states do not allow the exclusion  
of incidental or consequential damages, so the above exclusion may not apply to you.  
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY  
FROM STATE TO STATE.  
Model Specific Section  
Your Product Model Number & Description:  
XL-HF200P(BK) HI FI COMPONENT SYSTEM  
(Be sure to have this information available when you need  
service for your Product.)  
One (1) year parts and labor from the date of purchase.  
Warranty Period for this Product:  
Non-functional accessories, supplies, and consumable  
items.  
Additional Item(s) Excluded from Warranty Coverage  
(if any):  
At a Sharp Authorized Servicer located in the United States.  
To find a location of the nearest Sharp Authorized Servicer,  
call Sharp toll free at 1-800-BE-SHARP.  
Where to Obtain Service:  
What to do to Obtain Service:  
Ship prepaid or carry in your Product to a Sharp Authorized  
Servicer. Be sure to have Proof of Purchase available. If  
you ship the Product, be sure it is insured and packaged  
securely.  
TO OBTAIN SUPPLY, ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP  
SHARP ELECTRONICS CORPORATION  
Sharp Plaza, Mahwah, New Jersey 07495-1163  
System connections  
Do not expose the unit to moisture, to temperatures higher than 140˚F  
(60˚C) or to extremely low temperatures.  
If your system does not work properly, disconnect the AC power cord  
from the AC outlet. Plug the AC power cord back in, and then turn on  
your system.  
In case of an electrical storm, unplug the unit for safety.  
Hold the AC power plug by the head when removing it from the AC outlet,  
as pulling the cord can damage internal wires.  
Precautions  
Please ensure that the equipment is positioned in a well ventilated area  
and ensure that there is at least 4” (10 cm) of free space along the sides,  
top and back of the equipment.  
4” (10 cm)  
4” (10 cm)  
4” (10 cm)  
The AC power plug is used as a disconnect device and shall always  
remain readily operable.  
Do not remove the outer cover, as this may result in electric shock.  
Refer internal service to your local SHARP service facility.  
This unit should only be used within the range of 41˚F - 95˚F (5˚C -  
35˚C).  
4” (10 cm)  
Use the unit on a firm, level surface free from vibration.  
Place the speakers at least 12” (30 cm) away from any CRT TV to avoid  
color variations across the TV screen. If the variations persist, move  
the speakers further away from the TV. LCD TV is not prone to such  
variation.  
Keep the unit away from direct sunlight, strong magnetic fields, excessive  
dust, humidity and electronic/electrical equipment (home computers,  
facsimiles, etc.) which generate electrical noise.  
Warning:  
The voltage used must be the same as that specified on this unit. Using this  
product with a higher voltage other than that which is specified is dangerous  
and may result in a fire or other type of accident causing damage. SHARP will  
not be held responsible for any damage resulting from use of this unit with a  
voltage other than that which is specified.  
Do not place anything on top of the unit.  
E-3  
 
System connections (continued)  
Make sure to unplug the AC power cord before making any connections.  
Installing the AM loop antenna  
Attaching  
to the wall >  
AM loop  
antenna  
<
Video cable  
< Assembling >  
(not supplied)  
Right  
speaker  
wall  
screws (not supplied)  
To video input jack  
Left  
speaker  
FM antenna  
Red  
Black  
AC outlet (AC 120 V ~ 60 Hz)  
Volume control  
Connecting a TV, etc.  
The sound level at a given volume setting depends on speaker efficiency,  
location, and various other factors. It is advisable to avoid exposure to high  
volume levels. Do not turn the volume on to full at switch on. Listen to music at  
moderate levels. Excessive sound pressure from earphones and headphones  
can cause hearing loss.  
Connect to the TV using an audio cable.  
To audio  
output jack  
TV  
Speaker connection  
Audio cable  
(commercially  
available)  
Connect the black wire to the minus (–) terminal,  
and the red wire to the plus (+) terminal.  
Use speakers with an impedance of 4 ohms or  
more, as lower impedance speakers can damage  
the unit.  
Do not make a mistake when connecting the right  
and left speakers. The right speaker is the one on  
the right side when you face the unit.  
Incorrect  
Do not let the bare speaker wires touch each other.  
Do not allow any objects to fall into or to be placed in the bass reflex  
ducts.  
Do not stand or sit on the speakers.You may be injured.  
To LINE input  
jack  
Main unit  
Using other subwoofer  
You can connect a subwoofer with an amplifier to the SUBWOOFER PRE  
OUT jack.  
Commercially available subwoofer  
Audio cable  
(commercially  
available)  
(amplifier built in)  
Audio signal  
To audio  
input jack  
To select Line In function:  
To SUBWOOFER  
PRE OUT jack  
On main unit: Press FUNCTION button repeatedly until Line In is  
displayed.  
Main unit  
On remote control: Press AUDIO/LINE (INPUT) button repeatedly until  
Line In is displayed.  
Notes:  
No sound is heard from the subwoofer without a built-in amplifier.  
Subwoofer Pre-out (audio signal): 200mV / 10k ohms at 70 Hz.  
E-4  
 
Volume control  
Turn the volume knob toward VOL +/- (on main unit) or press VOLUME  
+/- (on remote control) to increase or decrease the volume.  
Remote control  
Battery installation  
Use  
2
“AAA” size batteries (UM/SUM-4, R3, HP-16 or similar).  
Auto power on function  
Batteries are not included.  
When you press any of the following buttons, the unit turns on.  
iPod® / iPhone, CD, USB, AUDIO / LINE (INPUT), TUNER (BAND) on the  
remote control: Selected function is activated.  
Plastic film covering can be removed or peeled off.  
1
2
Open the battery cover.  
Insert the batteries according to the direction indicated in the battery  
compartment.  
button on the main unit: The unit turns on and playback of the last  
function will start (CD, TUNER, USB, iPod, AUDIO IN, LINE IN)  
When inserting or removing the batteries, push them toward the  
battery terminals.  
Auto power off function  
3
Close the battery cover.  
The main unit will enter the stand-by mode (when iPod/iPhone is not docked)  
after 15 minutes of inactivity during:  
iPod/iPhone: No connection.  
AUDIO IN / LINE IN: No detection of input signal or very low sound audibility.  
TUNER: No reception of broadcast signal.  
CD / USB: In the stop mode.  
Caution:  
Replace all old batteries with new ones at the same time. Do not mix old  
and new batteries.  
Note:  
Do not mix old and new batteries.  
However, if iPod/iPhone is docked, the unit will begin charging.  
“Charge Mode” will be displayed.  
Remove the batteries if the unit will not be used for a long period of time.  
This will prevent potential damage due to battery leakage.  
Do not use rechargeable batteries (nickel-cadmium battery, etc.).  
Installing the batteries incorrectly may cause the unit to malfunction.  
Batteries (battery pack or batteries installed) shall not be exposed to  
excessive heat such as sunshine, fire or the like.  
Muting  
The volume is muted temporarily when pressing the MUTE button on the  
remote control. Press again to restore the volume.  
Notes concerning use:  
Replace the batteries if the operating distance is reduced or if the  
operation becomes erratic. Purchase 2 “AAA” size batteries (UM/SUM-4,  
R3, HP-16 or similar).  
X-Bass control  
When the power is first turned on, the unit will enter the extra bass mode  
which emphasizes the bass frequencies, and “X-BASS” will appear. To cancel  
the extra bass mode, press the X-BASS button on the remote control.  
Periodically clean the transmitter on the remote control and the sensor  
on the unit with a soft cloth.  
Exposing the sensor on the unit to strong light may interfere with  
operation. Change the lighting or the direction of the unit.  
Keep the remote control away from moisture, heat, shock, and  
vibrations.  
Bass control  
1
2
Press the BASS/TREBLE button to select “BASS”.  
Within 5 seconds, press the VOLUME (+ or -) button to adjust the bass.  
General control  
Treble control  
To turn the power on  
1
Press the BASS/TREBLE button to select “TREBLE”.  
The first time the unit is plugged in, the unit will enter the demonstration mode.  
2
Within 5 seconds, press the VOLUME (+ or -) button to adjust the treble.  
Remote  
Function  
Main unit  
Operation  
Equalizer  
control  
Flat  
Equalizer off.  
Power on/ off  
Press to turn the  
power on or to go to  
stand-by mode.  
When the EQUALIZER MODE  
button is pressed, the current  
mode setting will be displayed. To  
change to a different mode, press  
the EQUALIZER MODE button  
repeatedly until the desired  
sound mode appears.  
Game For game.  
Classic  
Pops  
For classical music.  
For pop music.  
____  
Demo on/ off  
Press to enter to  
demonstration on or  
off mode.  
Vocal Vocals are enhanced.  
Jazz For jazz.  
Display brightness control  
Function  
To dim the display brightness, press the DEMO/DIMMER button on the  
remote control.  
When the FUNCTION button on main unit is pressed, the current function will  
change to different mode. Press the FUNCTION button repeatedly to select  
desired function.  
Dimmer 1  
Dimmer 2  
Dimmer off  
(Display is dim).  
(Display gets dimmer).  
(Display is bright).  
CD  
FM STEREO  
FM MONO  
AM  
Volume illuminator  
When the power is turned on, volume illuminator lights up.  
Audio In  
iPod  
USB  
Line In  
To turn on/off the light, hold down the DEMO/DIMMER button on the  
remote control for more than 2 seconds.  
Note:  
The backup function will protect the memorized function mode for a few hours  
should there be a power failure or the AC power cord becomes disconnected.  
Volume auto fade-in  
If you turn off and on the main unit with the volume set to 27 or higher, the  
volume starts at 16 and fades in to the last set level.  
E-5  
 
Listening to the iPod or iPhone  
iPhone and iPod operations  
Made for:  
2
Insert the iPod or iPhone adaptor into unit and connect your iPod  
or iPhone.  
iPhone 3GS  
iPhone  
iPhone (bottom)  
iPhone 3G  
iPhone  
iPod touch (3rd generation)  
iPod touch (2nd generation)  
iPod touch (1st generation)  
iPod classic  
Dock connector  
iPod with video  
iPhone adaptor  
iPod nano (5th generation)  
iPod nano (4th generation)  
iPod nano (3rd generation)  
iPod nano (2nd generation)  
iPod nano (1st generation)  
iPod with color display  
iPod mini  
iPhone dock  
iPhone connector  
Caution:  
Caution:  
Please update your iPod unit to the latest software version from Apple’s  
homepage before using it.  
Unplug all accessories from the iPod or iPhone before inserting it into  
the dock.  
Notes:  
Once the iPod or iPhone is connected to the unit it will begin  
charging.  
To remove iPod or iPhone adaptor  
Insert the tip of a screwdriver (“-” type, small)  
into the adaptor hole as shown and lift upward  
to remove.  
Error message “This accessory is not made to work with iPhone”  
may appear on the iPhone screen when iPhone battery is low.  
The message “This accessory is not made to work with iPhone”  
or “This accessory is not supported by iPhone” may appear on  
the iPhone screen when the iPhone is not properly docked (eg.  
slanting) on this product. If this occurs, please remove and re-dock  
the iPhone.  
iPod or iPhone playback  
1
2
Press the ON/STAND-BY button to turn the power on.  
Press the iPod/iPhone button on the remote control or Function  
button repeatedly on the main unit to select iPod function.  
This product is made for iPhone.To prevent random interference  
when iPhone is docked, the headphone output is disabled.  
3
4
Insert iPod or iPhone unit in iPod dock of main unit.  
You may also experience brief audio interference during  
incoming calls.  
Press the  
(iPod/iPhone  
) button to start playback.  
iPod and iPhone adaptor connection  
Notes:  
Please use the adaptor supplied with your iPod or iPhone unit.  
You can use an audio cable to connect your iPod to the AUDIO IN  
jack if:  
1. your iPod adaptor does not fit into the iPod dock on the main  
unit.  
RRMCGA232AWSA  
2. you have an iPod that does not have an iPod adaptor.  
3. you have an iPod that does not have an iPod 30 pin connector.  
iPhone Adaptor  
iPhone  
Description  
iPhone playback  
Capacity  
No.  
Sound will only switch from iPhone to the main unit after  
authentication process is completed in approximately 10 seconds.  
12  
iPhone  
4GB & 8GB & 16GB  
8GB & 16GB  
Incoming calls will pause the playback and iPhone ringtones will be  
heard from the main unit speakers only.  
15  
iPhone 3G  
15  
iPhone 3GS  
16GB & 32GB  
Once the calls are answered, the conversation can only be heard  
through the built-in iPhone speaker. Turn on the iPhone speaker or  
undock the iPhone to start conversation.  
To insert iPod or iPhone adaptor  
1
Open the iPod cover by pulling up.  
To disconnect iPod or iPhone  
Simply remove the iPod or iPhone from the iPod dock. It is safe to do so  
even during playback.  
E-6  
 
Remote  
control  
Listening to the iPod or iPhone  
(continued)  
Function Main unit  
Operation  
Track  
up/down  
Press in the playback or pause  
mode. If you press the button  
in the pause mode, press the  
button to start the desired  
track.  
Navigating the iPod and iPhone menus  
1
Press the MENU button to view the menu on iPod or iPhone unit.  
Press it again to go back to previous menu.  
Fast  
forward/  
reverse  
Press and hold down in the  
playback mode.  
Release the button to resume  
playback.  
2
Use the PRESET (  
and then press ENTER button.  
or  
) button to select an item on the menu  
Note:  
When navigating the iPod or iPhone menu with remote control, do not  
operate any of the buttons on the iPod or iPhone unit. The volume level  
is adjusted by pressing the VOL (+ or -) button on the main unit or the  
remote control. Adjusting the volume on the iPod and iPhone units give  
no effect.  
Display  
iPod back light ON.  
Press for more than 2 seconds  
to toggle the video out display  
between iPod or TV.  
____  
Repeat  
Shuffle  
Press to toggle repeat mode.  
____  
____  
____  
iPod and iPhone operations:  
The operations described below depend on the generation iPod and  
iPhone you are using.  
Press and hold down to toggle  
shuffle mode.  
iPod  
Menu  
Press to view the iPod menu  
during iPod function.  
System on operation:  
When the main unit is powered on, the iPod and iPhone units will  
automatically power on when docked in the unit.  
iPod  
Enter  
Press to confirm the selection.  
____  
____  
System off (stand-by operation):  
When the main unit is turned to stand-by mode, the docked iPod and  
iPhone unit will automatically turn to stand-by mode.  
iPod  
Cursor  
Up/Down  
Press to select the iPod menu.  
Watching videos on a TV connected to iPod  
or iPhone  
Listening to a CD or MP3/WMA disc  
1
Press the DISPLAY (TV OUT) button for more than 2 seconds. “TV  
Display” will appear on display.  
2
Press the ENTER button to start playback.  
Notes:  
If the TV Out setting is already turned on at video menu, the video  
is automatically displayed on the TV screen when ENTER key is  
pressed.  
To return to watching video on iPod or iPhone screen, press the  
MENU button to enter video menu. Then press the DISPLAY (TV  
OUT) button for more than 2 seconds until “iPod Display” appears.  
RRMCGA232AWSA  
During iPod or iPhone video playback, pressing the DISPLAY (TV  
OUT) button will not toggle video out display between iPod and TV.  
iPod or iPhone playback detection function:  
Disc playback  
Once the play button on the iPod or iPhone unit is pressed, the main  
unit will automatically change to iPod function overriding the previous  
function selected.  
1
2
Press the ON/STAND-BY button to turn the power on.  
Press the CD button on the remote control or FUNCTION button  
repeatedly on the main unit to select CD function.  
Press the OPEN/CLOSE button to open the disc tray.  
Place the disc on the disc tray, label side up.  
3
4
5
6
Caution:  
Unplug all accessories for the iPod or iPhone before inserting it into  
Press the OPEN/CLOSE button to close the disc tray.  
the iPod dock.  
Press the  
(CD/USB  
) button to start playback. After the last  
Stop button ( ) at main unit is invalid during iPod function.  
track is played, the unit will stop automatically.  
Notes for CD or MP3/WMA disc:  
Various iPod functions  
When the end of the last track is reached during fast forward, “END”  
will appear on the display and CD operation will be paused. When the  
beginning of the first track is reached during fast reverse, the unit will  
enter the playback mode (only for CD).  
Remote  
control  
Function Main unit  
Operation  
Play  
Press in the pause mode.  
Rewritable multi-session discs with unfinished writing, can still be  
played.  
Pause  
Press in the playback mode.  
E-7  
 
Listening to a CD or MP3/WMA disc (continued)  
Various disc functions  
Repeat play  
Repeat play can play one track, all tracks or a programed sequence  
continuously.  
Remote  
control  
Function  
Main unit  
Operation  
Play  
Press in the stop mode.  
To repeat one track:  
Press the PLAY MODE button repeatedly until “Repeat One” appears.  
Press the  
To repeat all tracks:  
Press the PLAY MODE button repeatedly until “Repeat All” appears.  
Press the (CD/USB ) button.  
To repeat desired tracks:  
(CD/USB  
) button.  
Stop  
Pause  
Press in the playback mode.  
Press in the playback  
mode. Press the  
button  
to resume playback from the  
paused point.  
Press in the playback or stop  
mode.  
Perform steps 1 - 5 in “Programed play” section on page 8-9 and then  
press the PLAY MODE button repeatedly until “Repeat All” appears.  
Track up/  
down  
To cancel repeat play:  
Press the PLAY MODE button repeatedly until “Normal” appears and “  
” disappears.  
If you press the button in the  
stop mode, press the  
button to start the desired track.  
Press and hold down in the  
playback mode.  
Fast  
forward/  
reverse  
Release the button to resume  
playback.  
Random play  
The tracks on the disc can be played in random order automatically.  
To random play all tracks:  
Press and hold down PLAY MODE button on the remote control until “Random”  
appears. Press the  
(CD/USB  
) button.  
To cancel random play:  
Press the PLAY MODE button until “RDM” indicator disappears.  
RGA232AWA  
Notes:  
Direct track search  
If you press the  
button during random play, you can move to the track  
button  
By using the Numeric buttons, the desired tracks on the current disc can  
be played.  
Use the Numeric buttons on the remote control to select the desired  
track while playing the selected disc.  
selected next by the random operation. On the other hand, the  
does not allow you to move to the previous track. The beginning of the  
track being played will be located.  
In random play, the unit will select and play tracks automatically. (You  
cannot select the order of the tracks.)  
The Numeric buttons allow you to select up to number 9.  
When selecting number 10 or higher, use the “10+” button.  
Caution:  
A. For example, to choose 13  
After performing repeat play, be sure to press the  
Otherwise, the disc will play continuously.  
(CD/USB  
) button.  
1
2
3
Press the “10+” button once.  
Press the “1” button.  
Press the “3” button.  
Selected track number  
Programed play (CD)  
B. For example, to choose 130  
You can choose up to 32 selections for playback in the order you like.  
1
2
3
4
Press the “10+” button twice.  
1
While in the stop mode, press the MEMORY button on the remote  
control to enter the programing save mode.  
Press the “1” button.  
Press the “3” button.  
Press the “0” button.  
Notes:  
A track number higher than the number of tracks on the disc cannot  
be selected.  
2
Press the  
track.  
or  
buttons on the remote control to select the desired  
Selected track number  
During random play, direct search is not possible.  
To stop playback:  
Press the (CD/USB ) button.  
E-8  
 
Procedure to playback MP3/WMA disc  
Listening to a CD or MP3/WMA disc  
(continued)  
with folder mode on  
To play back CD-R/RW.  
3
4
Press the MEMORY button to save the track number.  
1
Press the CD button, and load an MP3/WMA disc. Press the FOLDER  
button and disc info will be displayed.  
MP3 indicator  
Repeat steps 2 - 3 for other tracks. Up to 32 tracks can be programed.  
If you want to check the programed tracks, press the MEMORY button  
repeatedly. If you make a mistake, the programed tracks can be cleared  
by pressing the CLEAR button.  
WMA indicator  
TOTAL indicator  
5
Press the  
(CD/USB  
) button to start playback.  
Total number of folder  
Total number of files  
Programed play (MP3/WMA)  
2
Press the PRESET ( or ) button to select desired playback folder.  
(Folder mode on)  
FOLDER  
1
While in the stop mode, press the MEMORY button to enter the  
programing save mode.  
indicator  
2
Press the PRESET ( or ) button on the remote control to select  
the desired folder  
FOLDER number  
Select desired file to be played back by pressing the  
Press the (CD/USB ) button. Playback will start and file name  
will be displayed.  
First track number in the folder  
3
4
or button.  
Title, Artist and Album name are displayed if they are recorded on  
the disc.  
Then press the  
desired tracks.  
or  
button on the remote control to select the  
In case of playback with the folder mode on, press the PRESET  
(
or ) button, and the folder can be selected even though it is in  
playback/pause mode. It will continue playback/pause mode in the  
1st track of the selected folder.  
3
4
Press the MEMORY button to save the folder and track number.  
Display content can be changed by pressing the DISPLAY button.  
Repeat steps  
programed.  
2
-
3
for other folder/tracks. Up to 32 tracks can be  
File name display  
Folder display  
5
Press the  
(CD/USB  
) button to start playback.  
Title display  
Counter display  
To cancel the programed play mode:  
During programed stop mode, press the (CD/USB ) button.The display will  
show “Memory Clear” and all the programed contents will be cleared  
Album display  
Artist display  
Note:  
If “Not Support” is displayed, it means “Copyright protected WMA file” or “Not  
supported playback file” is selected.  
Adding tracks to the program:  
If a program has been previously stored, the “MEM” indicator will be displayed.  
Press the MEMORY button repeatedly to go to the last program memory.Then  
follow steps 2 - 3 to add tracks.The new tracks will be stored after the last track  
of the previous program.  
Listening to USB mass storage  
device/MP3 player  
Notes:  
When a disc is ejected, the program is automatically canceled.  
If you press the ON/STAND-BY button to enter the stand-by mode or  
change the function from CD to another, the programed selections will  
be cleared.  
During the program operation, random play is not possible.  
RR232A
Note:  
This product is not compatible with MTP and AAC file systems from USB mass  
storage device or MP3 player.  
E-9  
 
This product can play WMA and MP3 files. It will automatically detect the  
file type being played. If unplayable file is played on this product, “Not  
Support” is indicated and the file will be automatically skipped. This will  
take a few seconds. If abnormal indications appear on the display due to  
the unspecified file, turn off the unit and then turn it on again.  
Listening to USB mass storage device/  
MP3 player (continued)  
To play back USB/MP3 player with folder  
mode off  
This product relates to USB mass storage devices and MP3 players. It  
may however face some irregularities due to various unforeseen reasons  
from some devices. Should this happen, turn off the unit and then turn  
it on again.  
1
Press the USB button on the remote control or FUNCTION button  
repeatedly on main unit to select USB function. Connect the USB  
memory device that has MP3/WMA format files on the unit. When the  
USB memory is connected to the main unit, the device information will  
be displayed.  
The USB port is only intended for direct connection to a USB memory  
device without any cable.  
During CD function, MP3 player will not be charging.  
2
3
Select desired file to be played back by pressing the  
Press the (CD/USB ) button. Playback will start and the file  
name will be displayed.  
or  
button.  
Advanced USB playback  
Title, Artist and Album name are displayed if they are recorded in  
the USB memory device.  
The following functions are the same as CD operations:  
Page  
Display content can be changed by pressing the DISPLAY button.  
Direct track search .......................................................................................8  
Repeat play ...................................................................................................8  
Random play.................................................................................................8  
Programed play......................................................................................... 8-9  
Note:  
To pause playback:  
Press the (CD/USB  
) button.  
Note:  
To play back USB/MP3 player with folder  
If USB memory device is not connected, “USB No Media” will be shown on  
the display.  
mode on  
Notes:  
1
Press the USB button on the remote control or FUNCTION button  
repeatedly on main unit to select USB function. Connect the USB  
memory device that has MP3/WMA format files on the unit. When the  
USB memory is connected to the main unit, the device information will  
be displayed.  
This unit only supports “MPEG-1 Audio Layer-3” format. (Sampling  
Frequency is 32, 44.1, 48kHz)  
Playback order for MP3 files may differ depending on the writing software  
used during file download.  
Bitrate which is supported by MP3 is 32~320 kbps, WMA is 64~160  
kbps.  
2
Press the FOLDER button, and press the PRESET (  
or  
) button to  
select desired playback folder. To start playback with folder mode on, go  
For MP3/WMA files, please put “.MP3.WMA” extension. Files cannot be  
played back if there is no MP3/WMA extension.  
to step 4. To change the playback folder, press the PRESET (  
button to select another folder.  
or  
)
Playlists are not supported on this unit.  
3
4
Select desired file to be played back by pressing the  
Press the (CD/USB  
name will be displayed.  
or  
button.  
This unit can display Folder Name or File Name up to 32 characters.  
) button. Playback will start and the file  
Maximum total number of MP3/WMA files is 1024. Maximum total  
number of folders is 255 inclusive of root directory.  
Title, Artist and Album name are displayed if they are recorded in  
the USB memory device.  
The display playback time may not be displayed correctly when playing  
back a variable bitrate file.  
Display content can be changed by pressing the DISPLAY button.  
The ID3TAG information supported are TITLE, ARTIST and ALBUM only.  
Title name, artist name and album name can be displayed by pressing  
the DISPLAY button during file playback or pause mode.  
To remove USB memory device  
1
2
Press the (CD/USB ) button to stop playback.  
WMA meta tag also supports title, artist and album name which are  
recorded in WMA files. Copyright protected WMA files cannot be played  
back.  
Disconnect USB memory device from the USB terminal.  
Notes:  
SHARP will not be held liable for the loss of data while the USB memory  
device is connected to the audio system.  
Files compressed in MP3 and/or WMA format can be played back when  
connected to the USB terminal.  
This USB memory’s format supports FAT 16 or FAT 32.  
SHARP cannot guarantee that all USB memory devices will work on this  
audio system.  
USB cable is not recommended for use in this audio system to connect  
to USB memory device. Use of the USB cable will affect the performance  
of this audio system.  
This USB memory cannot be operated via USB hub.  
The USB terminal in this unit is not intended for a PC connection but is  
used for music streaming with a USB memory device.  
External HDD-storage cannot be played back via USB terminal.  
If the data inside the USB memory is large, it may take longer time for  
the data to be read.  
E-10  
 
4
5
Within 30 seconds, press the MEMORY button to store that station in  
memory. If the “MEMORY” and preset number indicators disappear  
before the station is memorized, repeat the operation from step 2.  
Listening to the radio  
Repeat steps 1 - 4 to set other stations, or to change a preset station.  
When  
a
new station is stored in the memory, the station previously  
memorized for that preset channel number will be erased.  
Note:  
The backup function protects the memorized stations for a few hours should  
there be a power failure or the AC power cord become disconnected.  
To recall a preset station  
1
Press the PRESET (  
the desired station.  
or  
) button for less than 0.5 seconds to select  
To scan the preset stations  
The stations saved in the memory can be scanned automatically. (Preset  
memory scan)  
RMGA23AWSA  
1
Press the PRESET (  
preset number will flash and the programed stations will be tuned in  
sequentially, for 5 seconds each.  
or  
) button for more than 0.5 seconds. The  
2
Press the PRESET (  
is located.  
or  
) button again when the desired station  
Tuning  
1
2
Press the ON/STAND-BY button to turn the power on.  
Press the TUNER (BAND) button repeatedly to select the desired  
frequency band (FM or AM).  
To erase entire preset memory  
1
Press the ON/STAND-BY button to enter the stand-by mode.  
3
Press the TUNING (  
to the desired station.  
or  
) button on the remote control to tune in  
2
While pressing down the FUNCTION button, press the ON/STAND-BY  
button until “Tuner Clear” appears.  
Manual tuning:  
FUNCTION ON/STAND-BY  
Press the TUNING (  
the desired station.  
or  
or  
) button repeatedly to tune in to  
) button is pressed for more than  
Auto tuning:  
When the TUNING (  
0.5 seconds, scanning will start automatically and the tuner will  
stop at the first receivable broadcast station.  
Notes:  
Setting the clock (Remote control only)  
When radio interference occurs, auto scan tuning may stop automatically  
at that point.  
Auto scan tuning will skip weak signal stations.  
To stop the auto tuning, press the TUNING (  
or  
) button again.  
To receive an FM stereo transmission:  
Press theTUNER (BAND) button to select stereo mode and “STindicator  
will be displayed. “  
stereo.  
” and “ ” will appear when an FM broadcast is in  
If the FM reception is weak, press the TUNER (BAND) button to  
extinguish the “ST” indicator. The reception changes to monaural, and  
the sound becomes clearer.  
In this example, the clock is set for the 12-hour (AM 12:00) display.  
Presetting a station  
1
2
3
Press the ON/STAND-BY button to turn the power on.  
Press the CLOCK/TIMER button.  
You can store 40 AM and FM stations in memory and recall them at the push  
of a button. (Preset tuning)  
Within 10 seconds, press the ENTER button.To adjust the day, press the  
or  
button and then press the ENTER button.  
1
2
Perform steps 1 - 3 in “Tuning”.  
Press the MEMORY button.  
4
Press the  
press the ENTER button.  
or button to select 24-hour or 12-hour display and then  
The 12-hour display will appear.  
(AM 12:00 - PM 11:59)  
3
Within 30 seconds, press the PRESET (  
preset channel number. Store the stations in memory, in order, starting  
with preset channel 1.  
or  
) button to select the  
The 12-hour display will appear.  
(AM 00:00 - PM 11:59)  
The 24-hour display will appear.  
(00:00 - 23:59)  
E-11  
 
6
7
8
9
To adjust the day, press the  
the ENTER button.  
or  
button and then press  
Setting the clock (continued)  
5
6
To adjust the hour, press the  
ENTER button. Press the or  
1 hour. Hold it down to advance continuously.  
or  
button and then press the  
Press the ENTER button to adjust the hour. Press the  
button and then press the ENTER button.  
or  
button once to advance the time by  
To adjust the minutes, press the  
press the ENTER button.  
or  
button and then  
To adjust the minutes, press the or  
button and then press the  
Set the time to finish as in steps 7 and 8 above.  
ENTER button. Press the  
by 1 minute.  
or  
button once to advance the time  
10 Adjust the volume using theVOLUME control, and then press  
the ENTER button. Do not turn the volume up too high.  
To confirm the time display:  
11 Press the ON/STAND-BY button to enter the power stand-by  
mode. The “TIMER” indicator lights up and the unit is ready  
for timer playback.  
Press the CLOCK/TIMER button. The time display will appear for about 5  
seconds.  
Note:  
When power supply is restored after unit is plugged in again or after a power  
failure, reset the clock (pages 11).  
To readjust the clock:  
Perform “Setting the clock” from step 1. If the “Clock” does not appear in step  
2, step 4 (for selecting the 24-hour or 12-hour display) will be skipped.  
12 When the preset time is reached, playback will start. The  
volume will increase gradually until it reaches the preset  
volume. The timer indicator will blink during timer playback.  
To change the 24-hour or 12-hour display:  
1
Clear all the programed contents. [Refer to “Factory reset, clearing all  
memory” on page 14 for details.]  
13 When the timer end time is reached, the system will enter the  
2
Perform “Setting the clock” from step 1 onwards.  
power stand-by mode automatically.  
Once timer:  
Timer and sleep operation (Remote  
control only)  
The timer will be canceled.  
Daily timer:  
The timer operates at the same time every day. It will continue  
until the daily timer setting is canceled. Cancel the daily timer  
when it is not in use.  
Once timer:  
Once timer play works for one time only at a preset time.  
(“ ” indicator).  
Notes:  
Daily timer:  
When performing timer playback using another unit  
connected to the USB terminal or AUDIO IN jack, select  
“USB” or “AUDIO IN” or “LINE IN” in step 5.  
Daily timer play works at the same preset time every day that we  
set. For example, set the timer as a wake-up call every morning.  
(“DAILY” indicator).  
This unit will turn on or enter the power stand-by mode  
automatically. However, the connected unit will not turn on  
or off.To stop the timer playback, follow step “Canceling the  
timer setting” of this page.  
Using the once timer and daily timer in combination:  
For example, use the once timer to listen a radio program, and  
use the daily timer to wake up.  
Checking the timer setting:  
1
2
3
Turn the power on and press and hold down the CLOCK/  
TIMER button.  
1 minute or more  
Within 10 seconds, press the  
or  
button to select  
Daily timer  
Once timer  
“Once” or “Daily”, and press the ENTER button.  
Start  
Stop  
Start  
Stop  
Within 10 seconds, press the or button to select  
“Timer Call”, and press the ENTER button.  
Timer playback  
Canceling the timer setting:  
1
2
3
Turn the power on and press and hold down the CLOCK/  
TIMER button.  
Before setting timer:  
Check that the clock is set to the correct time (refer to  
page 11-12). If it is not set, you cannot use the timer  
function.  
Within 10 seconds, press the  
or  
button to select  
“Once” or “Daily”, and press the ENTER button.  
Within 10 seconds, press the  
or  
button to select  
For timer playback: Plug in USB or load discs or dock iPod  
to be played.  
“Timer Off”, and press the ENTER button. Timer will be  
canceled (the setting will not be canceled).  
Reusing the memorized timer setting:  
The timer setting will be memorized once it is entered. To reuse  
the same setting, perform the following operations.  
1
2
3
Press the ON/STAND-BY button to turn the power on.  
Press and hold the CLOCK/TIMER button.  
1
2
3
4
Turn the power on and press and hold down the CLOCK/  
TIMER button.  
Within 10 seconds, press the  
or  
button to select  
Within 10 seconds, press the  
or  
button to select  
“Once” or “Daily”, and press the ENTER button.  
“Once” or “Daily”, and press the ENTER button.  
4
5
Within 10 seconds, press the or button to select  
“Timer Set”, and press the ENTER button.  
Within 10 seconds, press the or button to select  
“Timer On” , and press the ENTER button.  
To select the timer playback source (CD, TUNER, USB, iPod,  
Press the ON/STAND-BY button to enter the power stand-  
by mode.  
AUDIO IN, LINE IN), press the  
ENTER button.  
or  
button. Press the  
When you select the tuner, select a station by pressing the  
or  
button, and then press the ENTER button. If a station  
has not been programed, “No Preset” will be displayed and  
timer setting will be canceled.  
E-12  
 
Timer and sleep operation  
(Remote control only) (continued)  
Enhancing your system  
The connection cord is not included. Purchase a commercially  
available cord as shown below.  
Sleep operation  
The radio, compact disc, iPod, USB, Audio In and Line In  
can all be turned off automatically.  
1
2
3
Play back the desired sound source.  
Press the SLEEP button.  
Within 5 seconds, press the direct search button to set  
the time. (1 minute ~ 99 minutes)  
4
5
“SLEEP” will appear.  
The unit will enter the power stand-by mode  
automatically after the preset time has elapsed. The  
volume will be turned down 1 minute before the sleep  
operation finishes.  
Portable audio  
player, etc.  
To confirm the remaining sleep time:  
While “SLEEP” is indicated, press the SLEEP button.  
Audio cable (not supplied)  
1
To cancel the sleep operation:  
Listening to the playback sounds of  
Press the ON/STAND-BY button while “SLEEP” is  
indicated. To cancel the sleep operation without setting  
the unit to the stand-by mode, proceed as follows.  
portable audio player, etc.  
1
Use a connection cord to connect the portable audio  
player etc. to the AUDIO IN jack. When using video  
equipment, connect the audio output to this unit and  
the video output to a television.  
1
2
While “SLEEP” is indicated, press the SLEEP button.  
Within 5 seconds, press the “0” button twice until  
“SLEEP 00” appears.  
2
3
Press the ON/STAND-BY button to turn the power on.  
To use timer and sleep operation together  
Press the AUDIO/LINE (INPUT) button on the remote  
control or FUNCTION button repeatedly on main unit  
to select AUDIO IN function.  
Sleep and timer playback:  
For example, you can fall asleep listening to the radio and  
wake up to CD in the next morning.  
4
Play the connected equipment. If volume level of the  
connected device is too high, sound distortion may  
occur. Should this happen, lower the volume of the  
connected device. If volume level is too low, increase  
the volume of the connected device.  
1
2
Set the sleep time (see above, steps 1 - 5).  
While the sleep timer is set, set the timer playback  
(steps 2 - 9, page 12).  
Timer playback setting  
Sleep timer setting  
1-99 minutes  
End time  
Desired time  
Note:  
To prevent noise interference, place the unit away from the  
television.  
Timer playback start  
time  
Sleep operation will  
automatically stop  
Headphones  
Do not turn the volume on to full at switch on and listen  
to music at moderate levels. Excessive sound pressure  
from earphones and headphones can cause hearing  
loss.  
Before plugging in or unplugging the headphone,  
reduce the volume.  
Be sure your headphone has a 3.5 mm diameter  
plug and impedance between 16 and 50 ohms. The  
recommended impedance is 32 ohms.  
Plugging in the headphone disconnects the speakers  
automatically. Adjust the volume using the VOLUME  
control.  
E-13  
 
iPod and iPhone  
Troubleshooting chart  
Many potential problems can be resolved by the owner without calling a  
Symptom  
Possible cause  
service technician.  
No sound is produced.  
No image appears on  
the TV/monitor.  
The iPod or iPhone is not playing.  
The iPod or iPhone is not properly  
connected to the unit.  
Is the AC power cord of the unit  
plugged in?  
The video cable is not properly  
connected.  
The TV/monitor’s input selection is not  
properly set.  
If something is wrong with this product, check the following before calling your  
authorized SHARP dealer or service center.  
General  
Symptom  
Possible cause  
The clock is not set to  
the correct time.  
Did a power failure occur? Reset the  
clock. (Refer page 11)  
When a button is  
pressed, the unit does  
not respond.  
Set the unit to the power stand-by  
mode and then turn it back on.  
If the unit still malfunctions, reset it.  
(Refer page 14)  
The iPod TV out feature has not been  
set to output video.  
iPod or iPhone will not  
charge.  
The iPod or iPhone is not making full  
contact with the connector.  
Using iPod (3rd generation).  
The iPod or iPhone is not supported.  
Refer to page 6 for compatible models.  
No sound is heard.  
Is the volume level set to “Min”?  
Are the headphones connected?  
Are the speaker wires disconnected?  
CD player  
“This accessory is  
not made to work  
with iPhone” or “This  
accessory is not  
supported by iPhone”  
appears on iPhone  
screen.  
The iPhone battery is low. Please  
charge the iPhone.  
iPhone is not properly docked.  
Symptom  
Possible cause  
Playback does not start.  
Playback stops in  
the middle or is not  
performed properly.  
Is the disc loaded upside down?  
Does the disc satisfy the standards?  
Is the disc distorted or scratched?  
Playback sounds are  
skipped, or stopped in  
the middle of a track.  
Is the unit located near excessive  
vibrations?  
Is the disc very dirty?  
Has condensation formed inside  
the unit?  
Condensation  
Sudden temperature changes, storage or operation in an extremely humid  
environment may cause condensation inside the cabinet (CD pickup, etc.) or  
on the transmitter on the remote control. Condensation can cause the unit to  
malfunction. If this happens, leave the power on with no disc in the unit until  
normal playback is possible (about 1 hour). Wipe off any condensation on the  
transmitter with a soft cloth before operating the unit.  
Remote control  
Symptom  
Possible cause  
The remote control  
does not operate.  
Is the AC power cord of the unit  
plugged in?  
Is the battery polarity correct?  
Are the batteries dead?  
Is the distance or angle incorrect?  
Does the remote control sensor  
receive strong light?  
If problem occurs  
When this product is subjected to strong outdoor interference (mechanical  
shock, excessive static electricity, abnormal supply voltage due to lightning,  
etc.) or if it is operated incorrectly, it may malfunction.  
If such a problem occurs, do the following:  
1
Set the unit to the stand-by mode and turn the power on again.  
2
If the unit is not restored in the previous operation, unplug and plug in the  
unit again, and then turn the power on.  
Tuner  
Note:  
Symptom  
Possible cause  
If neither operation above restores the unit, clear all the memory by resetting  
it.  
The radio makes  
unusual noises  
continuously.  
Is the unit placed near the TV or  
computer?  
Is the FM antenna or AM loop antenna  
placed properly? Move the antenna  
away from the AC power cord if it is  
located nearby.  
Factory reset, clearing all memory  
1
2
Press the ON/STAND-BY button to enter the power stand-by mode.  
While pressing down the OPEN/CLOSE button, press the ON/STAND-  
BY button until “Clear All” appears.  
USB  
Symptom  
Possible cause  
Device cannot be  
detected.  
Is there any MP3/WMA file available?  
Is the device properly connected?  
Is it an MTP device?  
Caution:  
This operation will erase all data stored in memory including clock, timer  
settings, tuner preset, and CD program.  
Does the device contain AAC file only?  
Playback does not start.  
Is it a copyright protected WMA file?  
Is it a false MP3 file?  
Before transporting the unit  
Remove the iPod/iPhone, USB memory device and disc from the unit. Then,  
set the unit to the power stand-by mode. Carrying the unit with iPod/iPhone or  
USB memory device left docked or discs left inside might damage the unit.  
Wrong time display.  
Wrong file name  
display.  
Is Variable Bitrate file being played  
back?  
Is the File Name written in Chinese or  
Japanese characters?  
E-14  
 
Amplifier  
Troubleshooting chart (continued)  
Care of compact discs  
Output power  
RMS: Total 100 watt (50 W per channel  
into 4 ohms at 1 kHz, 10% Total  
harmonic distortion.)  
FTC: 37.5 watt minimum RMS per  
channel into 4 ohms from 100 Hz  
to 20 kHz, 10% Total harmonic  
distortion.  
Compact discs are fairly resistant to damage, however mistracking can occur  
due to an accumulation of dirt on the disc surface. Follow the guidelines below  
for maximum enjoyment from your CD collection and player.  
Do not write on either side of the disc, particularly the non-label side from  
which signals are read. Do not mark this surface.  
Output terminals  
Input terminals  
Speakers: 4 ohms  
20Hz - 20kHz  
Keep your discs away from direct sunlight, heat, and excessive  
moisture.  
Subwoofer Pre-out (audio signal):  
200 mV/10 k ohms at 70 Hz  
Video output: 1 Vp-p  
Always hold the CDs by the edges. Fingerprints, dirt, or water on the  
CDs can cause noise or mistracking. If a CD is dirty or does not play  
properly, clean it with a soft, dry cloth, wiping straight out from the center,  
along the radius.  
Headphones: 16-50 ohms  
(recommended: 32 ohms)  
Audio In (audio signal):  
500 mV/47 k ohms  
Line in (Analog input):  
500 mV/47 k ohms  
Maintenance  
Cleaning the CD pickup lens  
In order to ensure proper operation of the CD player, preventative maintenance  
(cleaning of the laser pickup lens) should be performed periodically. Lens  
cleaners are commercially available. Contact your local CD software dealer  
USB  
USB host interface  
Complies with USB 1.1 (Full  
Speed)/2.0 Mass Storage Class.  
Support Bulk only and CBI protocol.  
for options.  
Cleaning the cabinet  
Periodically wipe the cabinet with a soft cloth and a diluted soap solution,  
then with a dry cloth.  
Support file  
Bitrate support  
Other  
MPEG 1 Layer 3  
WMA (Non DRM)  
Caution:  
MP3 (32 ~ 320 kbps)  
WMA (64 ~ 160 kbps)  
Do not use chemicals for cleaning (gasoline, paint thinner, etc.). It may  
damage the cabinet.  
Do not apply oil to the inside of the unit. It may cause malfunctions.  
Maximum total number of MP3/WMA  
files is 1024.  
Maximum total number of folders is  
255 INCLUSIVE of root directory.  
The ID3TAG information supported  
are TITLE, ARTIST and ALBUM  
only.  
Supports ID3TAG version  
version 2.  
Specifications  
As part of our policy of continuous improvement, SHARP reserves the right  
to make design and specification changes for product improvement without  
prior notice. The performance specification figures indicated are nominal  
values of production units. There may be some deviations from these values  
in individual units.  
1
and  
General  
File system support  
Support USB devices with Microsoft  
Windows/DOS/FAT 12/FAT 16/ FAT  
32.  
Power source  
AC 120 V ~ 60 Hz  
40 W  
2 kbyte block length for sector.  
Power consumption  
Dimensions  
Width: 8 - 1/2” (215 mm)  
Height: 3 - 1/2” (90 mm)  
Depth: 11 - 4/5” (300 mm)  
Tuner  
Frequency range  
FM: 87.5 - 108 MHz  
AM: 530 - 1,710 kHz  
Weight  
8.8 lbs. (4.0 kg)  
Preset  
40 (FM and AM station)  
CD player  
Speaker  
Type  
Single disc multi-play compact disc player  
Type  
2-way type speaker system  
1” (2.5 cm) Dome-Tweeter  
4-3/4” (12 cm) woofer  
Signal readout  
Non-contact, 3-beam  
semiconductor laser pickup  
D/A converter  
Multi bit D/A converter  
20 - 20,000 Hz  
Maximum input power  
Rated input power  
Impedance  
100 W  
50 W  
Frequency response  
Dynamic range  
90 dB (1 kHz)  
4 ohms  
Dimensions  
Width: 5 - 13/16” (148 mm)  
Height: 16-1/4” (260 mm)  
Depth: 8” (203.5 mm)  
Weight  
5.4 lbs. (2.5 kg)/each  
E-15  
 

Sentry Industries Headphones HO900 User Manual
Sharp Microwave Oven R 120PK User Manual
Shure Headphones SRH1540 User Manual
Sony Flat Panel Television 46NX810 User Manual
Sony Home Theater System DAV HDZ235 User Manual
Sony TV Mount UMI MDB3 User Manual
Stanton DJ Equipment SMX 301 User Manual
State Industries Water Heater CCVIT PR6 50 User Manual
Stinger Automobile Accessories SGN20 User Manual
Syba Tech Computer Accessories SY KVM20050 User Manual