2-059-371-11(1)
Making Video Connections
mp
k, the color looks unusual, or the LAMP
he LCD projection TV flashes, it is time
a new one (not supplied).
Programming the Remote Control
Best Video
4
Your TV includes
Connector type
Performance
several types of video
inputs. Use the inputs
that are available on
your components that
provide the best video
performance, as
KDF-42/50 WE655
KDF-55/60 WF655
KDF-55/60 XS955
HDMI
(High-Definition
Multimedia Interface)
The remote control is preset to operate Sony brand video equipment.
Sony Equipment
DVD/VCR
Programmable Code Number
601 (Sony Dream System)
801 (Sony Satellite Receiver)
00 (for WE655 series) or XL-2200 (for WF655 series)
) for replacement. Use of any other lamp may damage the
rn the power off on the main unit. Wait several minutes,
(The cooling fan will continue to blow for about two
wer off.)
Component video
S VIDEO
Qu ick Se t u p Gu id e
SAT/Cable
Do not throw away this guide, and keep it handy for future reference.
For further information, see the operating instructions supplied with the TV.
described in right.
If you have video equipment other than Sony brand that you want to
control with the LCD projection TV’s remote control, use the
following procedures to program the remote control.
Composite video
RF/Coaxial
completely before removing it. The surface of the lamp
least 30 minutes after the power has been turned off.
Please follow the steps to setup your TV:
Checking the
Supplied Accessories
XL-2100 for KDF-WE655 series
The equipment must have infrared (IR) remote capability in order to be used with this
remote control.
1
the rear
Using the code list below, find the three-digit code number for the
manufacturer of your equipment. (If more than one code number is
listed, use the number listed first.)
right is for
Connecting Your TV
(See reverse side)
2
1 Press the DVD/ VCR (FUNCTION) and RESET
buttons simultaneously, or press the SAT/ CABLE
(FUNCTION) and RESET buttons simultaneously.
DVD/ VCR and SAT/ CABLE buttons flash.
5
el.
3
4
2 Press the function button you want to program.
To program a cable box or a satellite receiver
Press SAT/ CABLE (FUNCTION).
Running Initial Setup
3
h a coin or
ve the lamp cover.
To program video equipment
VIDEO IN
Press DVD/ VCR (FUNCTION).
VHF/UHF
CABLE
1
3
4
Programming
the Remote Control
1, 2
S
VIDEO
7
3 Enter the three-digit manufacturer’s code number
4
VIDEO
R
L
s that hold
AUDIO IN
using the 0-9 buttons.
(MONO)
L
AUDIO
R
t the lamp.
4 Press ENT (enter).
HD/DVD IN
(1080i/720p/
480p/480i)
5
6
5 To check if the code number works, aim the TV’s
remote control at the equipment and press DVD/
VCR and/ or SAT/ CABLE (POWER) that corre-
sponds with that equipment. If it responds, the
programming is completed. If not, try using the
other codes listed for that manufacturer.
Y
C
P
P
L
B
AUDIO
OUT
1
R
(VAR/FIX)
and tighten the screws.
er and tighten the screw.
el securely.
If your product is not working properly
DO NOT RETURN TO THE STORE.
For service and technical assistance
Call our Customer Information Service Center (Toll Free):
1-800-222-SONY (7669) for US residents.
1-877-899-SONY (7669) for Canadian residents.
L
AUDIO
AUDIO
R
(OTICAL
R
IN
OUT
S
CONTROL
If more than one code number is listed, try entering them one by one until you come to
the correct code for your equipment.
If you enter a new code number, the code number you previously entered at that setting
is erased.
Sony Corporation © 2004 Printed in U.S.A.
panel in its place.
In some cases, you may not be able to operate your equipment with the supplied
remote control. In such cases, use the equipment’s own remote control unit.
DF-WF655 series/KDF-XS955 series
Checking the
Supplied Accessories
Running Initial Setup
the rear
1
3
WF655)
Manufacturer Code
Manufacturer Code
Manufacturer’s codes
DVD Players
Broksonic
319, 317
309, 308
332
Sylvania
Symphonic
Tashiro
Tatung
Teac
308, 309, 338, 310
Along with your new LCD projection TV, the packing box contains a
remote control, two AA (R6) batteries and a Cleaning Cloth. These
items are all you need to set up and use the TV.
1 Press POWER to turn on the TV.
Canon
338
Citizen
332
Manufacturer Code
The Initial Setup screen appears.
Craig
302, 332
304, 338, 309
341, 312, 309
314, 336, 337
304
314, 336, 337
314, 336, 338, 337
309, 308
312, 311
Sony
751
755
758
756
757
761
753
757
752
755
758
754
760
el.
Curtis Mathes
Daewoo
DBX
General Electric
Hitachi
Technics
Toshiba
Wards
2 Press V/ v to select the on-screen display language. Then press
JVC
Dimensia
Emerson
327, 328, 335, 331,
332
Magnavox
Mitsubishi
Panasonic
Philips
.
Connecting Your TV
319, 320, 316, 317,
318, 341
2
PRO
Yamaha
Zenith
314, 330, 336, 337
331
STD/DU
O
PO
WER
The message “Start auto program now?” appears.
Fisher
330, 335
WF655
XS955
Funai
338
Pioneer
General Electric
Go Video
Goldstar
329, 304, 309
322, 339, 340
332
Cable Boxes
• Review the following chart to determine which diagram to use to
connect the components in your system:
3 Press V/ v to select “Yes”, then press
only.
RCA/PROSCAN
Samsung
Toshiba
ase the bar (for WF655) or slide the knob
Manufacturer Code
Sony
230
remove the lamp cover.
Hitachi
306, 304, 305, 338
309, 308
Initial Setup automatically creates a list of receivable channels. When
finished, the lowest numbered channel is displayed.
Zenith
Hamlin/Regal
222, 223, 224, 225,
226
Instant Replay
JC Penney
For these components
See reverse side
309, 305, 304, 330,
314, 336, 337
Jerrold/G.I./Motorola 201, 202, 203, 204,
205, 206, 207, 208,
DVD Changers
218, 222
JVC
314, 336, 337, 345,
346, 347
Manufacturer Code
or
Oak
227, 228, 229
219, 220, 221
214, 215
If you need to perform Auto Program again
A
B
C
D
E
Sony
765
WF655
XS955
Kenwood
LG
314, 336, 332, 337
332
Panasonic
Pioneer
Panasonic
766
1 Press MENU.
or
or
LXI (SEARS)
332, 305, 330, 335,
338
secure the lamp, then pull out the lamp.
Scientific Atlanta
Tocom
209, 210, 211
216, 217
DVD/VCR Combo Units
Manufacturer Code
2 Press V/ v to select
3 Press V/ v to select “Auto Program,” then press
4 Press
(Channel), then press
.
Magnavox
Marantz
Marta
308, 309, 310
314, 336, 337
332
Zenith
212, 213
Sony
767
776
775
777
774
773
768
.
Broksonic
JVC
Satellite Receivers
Manufacturer Code
Memorex
Minolta
309, 335
305, 304
WF655
XS955
Panasonic
Samsung
Toshiba
Zenith
.
Sony
801
Mitsubishi/MGA
Multitech
NEC
323, 324, 325, 326
325, 338, 321
314, 336, 337
309, 308
Dish Network
Echostar
810
and tighten the screw.
er and tighten the screw.
el securely.
“Auto Program” appears and the TV starts scanning and
presetting channels automatically. When all the receivable
channels are stored, the “Show/ Hide Channels” menu appears.
Using this menu, you can start skipping unwanted channels (see
“Selecting Channel Options” in the operating instructions).
810
or
General Electric
Hitachi
802
Olympic
Optimus
Orion
805
327
HDD/DVD Combo Units
Manufacturer Code
Hughes
804
317
Mitsubishi
Panasonic
RCA/PROSCAN
Toshiba
809
Panasonic
Pentax
308, 309, 306, 307
305, 304
Sony
770, 771, 772
803
802, 808
806, 807
Philco
308, 309
F
5.1ch DVD AV System
Manufacturer Code
Philips
308, 309, 310
308
5 Press MENU to exit the menu screen.
Pioneer
panel in its place. (only for WF655)
* If an Aiwa VCR does not
work even though you enter
the code for Aiwa, enter the
code for Sony instead.
Sony (DAV)
601, 602, 603, 604
Quasar
308, 309, 306
• See the “Cables Required” chart that appears with the diagram to
determine which cables you’ll need. You may need to purchase
extra accessories, such as cables and splitters, depending on the
components you plan to connect.
• Turn off and unplug all components before making connections.
• If you are connecting a digital cable box, you’ll need a special bi-
directional splitter that’s compatible with your cable box. Contact
your cable provider for details.
RCA/PROSCAN
304, 305, 308, 309,
311, 312, 313, 310,
329
Auto Program may take up to 50 minutes to complete. A progress bar will display the
approximate progress of the Auto Program and Digital Channels/ Add sequences.
AV Receivers
Manufacturer Code
Realistic
309, 330, 328, 335,
324, 338
Sony
764
Sansui
Samsung
Sanyo
314
322, 313, 321
330, 335
VCRs
Manufacturer Code
Scott
312, 313, 321, 335,
323, 324, 325, 326
Sony
301, 302, 303
Admiral (M. Ward)
Aiwa*
327
Sharp
327, 328
338, 344
314, 337
Signature 2000 (M.Ward) 338, 327
SV 2000 338
Audio Dynamic
|