Sony Marine Lighting DK32 User Manual

User guide  
Magnetic Charging Dock  
 
DK32/DK33/DK36  
Introduction  
Charging made easy  
This charging dock is designed exclusively for your Xperia™ smartphone so that you  
can charge the phone without having to open the USB cover. The dock positions  
your phone at a comfortable viewing angle so that you can easily browse content  
while it's charging.  
1
Charging dock  
2
Attachments for holding phone in place  
3
This is an Internet version of this publication. © Print only for private use.  
 
Using the Magnetic Charging Dock  
Using the attachments  
Your accessory comes with two attachments of different width. Each attachment can  
fit into the charging dock and hold your phone in place while you charge it. Use the  
attachment marked with an "A" to attach a phone without a casing. If your phone has  
a protective case, use the attachment marked with a "B".  
Attachment B may not be compatible with all protective cases.  
Charging your phone  
To charge your phone using the Magnetic Charging Dock  
1
Plug the charger cable into the charging dock. Then plug the charger cable into  
your phone charger and plug the charger into a power outlet.  
Insert the required attachment into the charging dock.  
Place your phone in the dock so that the connectors on the side of the phone  
make contact with the connectors in the dock. The phone now starts to  
charge.  
2
3
4
If the Smart Connect pop-up window appears, follow the instructions to enable  
a pre-configured set of actions.  
Your phone does not charge if you plug the charger cable into the USB port of a computer.  
4
This is an Internet version of this publication. © Print only for private use.  
 
Legal information  
SonyDK32/DK33/DK36  
Prior to use, please read the Important information leaflet separately provided.  
This User guide is published by Sony Mobile Communications AB or its local affiliated company, without any  
warranty. Improvements and changes to this User guide necessitated by typographical errors, inaccuracies of  
current information, or improvements to programs and/or equipment, may be made by Sony Mobile  
Communications AB at any time and without notice. Such changes will, however, be incorporated into new  
editions of this User guide.  
All rights reserved.  
©2013 Sony Mobile Communications AB.  
Sony is the trademark or registered trademark of Sony Corporation.  
All product and company names mentioned herein are the trademarks or registered trademarks of their  
respective owners. Any rights not expressly granted herein are reserved. All other trademarks are property of  
their respective owners.  
Visit www.sonymobile.com for more information.  
All illustrations are for illustration only and may not accurately depict the actual accessory.  
Declaration of Conformity for DK32  
We, Sony Mobile Communications AB of  
Nya Vattentornet  
SE-221 88 Lund, Sweden  
declare under our sole responsibility that our product  
Sony type AI-0030  
and in combination with our accessories, to which this declaration relates is in  
conformity with the appropriate standards EN 301 489-7:V1.3.1 and EN 60  
950-1:2006+A11:2009+A1:2010 following the provisions of, EMC directive  
2008/108/EC.  
Lund, November 2013  
Pär Thuresson,  
Quality Officer, SVP, Quality & Customer Services  
Declaration of Conformity for DK33  
We, Sony Mobile Communications AB of  
Nya Vattentornet  
SE-221 88 Lund, Sweden  
declare under our sole responsibility that our product  
Sony type AI-0021  
and in combination with our accessories, to which this declaration relates is in  
conformity with the appropriate standards EN 301 489-7:V1.3.1 and EN 60  
950-1:2006+A11:2009+A1:2010 following the provisions of, EMC directive  
2008/108/EC, Low voltage directive 2006/95/EC.  
Lund, November 2013  
5
This is an Internet version of this publication. © Print only for private use.  
 
Pär Thuresson,  
Quality Officer, SVP, Quality & Customer Services  
Declaration of Conformity for DK36  
We, Sony Mobile Communications AB of  
Nya Vattentornet  
SE-221 88 Lund, Sweden  
declare under our sole responsibility that our product  
Sony type AI-0024  
and in combination with our accessories, to which this declaration relates is in  
conformity with the appropriate standards EN 301 489-7:V1.3.1 and EN 60  
950-1:2006+A11:2009+A1:2010 following the provisions of, EMC directive  
2008/108/EC, Low voltage directive 2006/95/EC.  
Lund, November 2013  
Pär Thuresson,  
Quality Officer, SVP, Quality & Customer Services  
FCC Statement  
This device complies with Part 15 of the FCC rules. Operation is subject to the following two  
conditions: (1) This device may not cause harmful interference, and (2) This device must  
accept any interference received, including interference that may cause undesired operation.  
Any change or modification not expressly approved by Sony may void the user's authority to operate the  
equipment.  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to  
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates, uses and can radiate radio frequency  
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to  
radio communications. However, there is no guarantee that interference will not occur in a particular  
installation.  
If this equipment does cause harmful interference to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of  
the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
Industry Canada Statement  
This device complies with RSS-210 of Industry Canada.  
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this  
device must accept any interference, including interference that may cause undesired operation of the device.  
This Class B digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.  
Avis d’industrie Canada  
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de  
licence.  
L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et,  
and (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est  
susceptible d'en compromettre le fonctionnement.  
6
This is an Internet version of this publication. © Print only for private use.  
 

Servis Rhino Compact Loader 5211 User Manual
Sharp Blu ray Player BD HP75U User Manual
Sony Clock Radio ICF C153L User Manual
Sony Computer Drive CRX230A User Manual
Sony Headphones MDR EX1000 User Manual
Sony Home Theater Screen PVM 14L2 User Manual
SpeakerCraft Speaker 10 User Manual
Sunbeam Toaster TA1210 User Manual
Sungale Camera Lens AD1020 User Manual
Symphonic DVD Player CWF804 User Manual