4-254-119-11(1)
The player
Portable USB
Memory Player
Operating Instructions
AZ-HS1/HS128/HS256
©2004 Sony Corporation
CAUTION
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate this
equipment.
Table of Contents
Overview
What you can do with your player ............. 4
Main features .............................................. 5
AZ-HS1: No “pavit” supplied
AZ-HS128: AZ-RM128 (a 128 MB “pavit”)
supplied
AZ-HS256: AZ-RM256 (a 256 MB “pavit”)
supplied
Getting started
Step 1: Check the package contents ........... 6
Step 2: Insert a battery ................................ 7
Locating controls ........................................ 8
If you have any questions about this product,
you may call;
Aiwa Customer Information Service Center
1-800-289-2492 or
Basic operations
Declaration of Conformity
Listening to music ...................................... 9
1. Put the player on your ears. .................... 9
2. Insert the “pavit” into the player........... 10
3. Start playback. ...................................... 10
Trade Name:
Model:
AIWA
AZ-RM256P
AZ-RM128P
Responsible Party:
Address:
Sony Electronics Inc.
16450 W. Bernardo Dr, San
Diego, CA 92127 U.S.A.
858-942-2230
Telephone Number:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
B Advanced operations
Changing the sound quality (M.D.S.E) .... 13
Playing a track repeatedly (REPEAT) /
Playing all tracks in random order
(SHUFFLE) .......................................... 13
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
Locking the controls (HOLD) .................. 14
Turning off the beep sounds (BEEP) ........ 14
Using the player as stereo headphones ..... 15
B Additional information
Precautions ............................................... 16
Cleaning.................................................... 16
Troubleshooting ........................................ 17
Specifications ........................................... 19
Index ........................................... Back cover
Before using this player, install
the application software on
your computer using the
supplied CD-ROM, and send
some music data to the player.
3
Overview
What you can do with your player
AZ-HS1/HS128/HS256 is a portable USB memory player specially designed for use with a USB
storage media called “pavit.” You can send MP3 files from your computer to the “pavit,” insert
the “pavit” into the player, and carry your favorite songs anywhere.
1 Send your
2 Enjoy music
anywhere with
your player!
favorite songs
to the “pavit.”
Use the supplied “Music
Transfer pavit Edition”
software to send MP3 files
from your computer to the
“pavit.”
What is “pavit”?
The “pavit” is a compact, lightweight, new-generation USB storage media* with a large
storage capacity. Although the “pavit” is dedicated to “pavit”-compatible devices, it can
also be used as an external storage media for your computer, since it connects directly to
the USB port, a standard interface for personal computers.
* Storage media is a device that can store data, such as floppy disk, hard disk and magneto-optic disk
(MO).
The “pavit” complies with USB2.0 (High-Speed USB).
4
Main features
• Headphone-style USB memory player
- Highly portable with the player built into the headphones
- Skip-proof operation
• Up to 120 minutes of music can be stored in a 128-MB “pavit” and 240 minutes in a 256-MB
“pavit.”*
• MP3 files on your computer are sent to the “pavit” by simple and easy operations using the
supplied “Music Transfer pavit Edition” software.
• The “pavit” connects directly to the USB port on your computer for high-speed data transfer.
• You can also store a variety of data other than MP3 files in the new-generation USB storage
media “pavit.”
* The time length varies according to the bit rate used when encoding MP3 files. The times indicated here are
for 128-kbps MP3 files.
Notes
• Music you record is limited to private use only. Any other use requires the permission of the copyright
holders.
• Sony is not liable for incomplete data transfer or damaged data due to problems of this product or your
computer.
5
Getting started
Step 1: Check the package contents
Check the accessories enclosed in the package.
• Portable USB memory player (1)
• CD-ROM* (“Music Transfer pavit
Edition”) (1)
• USB storage media “pavit” (1)
(not supplied with AZ-HS1)
• Operating instructions for the application software “Music Transfer pavit Edition” (1)
• Quick start guide (1)
About the serial number
The serial number provided for your player is printed in the battery compartment of the left ear
side of the headphones.
* Do not play the CD-ROM on an audio CD player.
6
Step 2: Insert a battery
The battery compartment is provided on the left ear side.
Insert one LR03 (size AAA) alkaline battery into the battery compartment as illustrated below.
Push and slide the F part.
Insert the E
end first
e
E
Battery duration
Approximately 11 hours (continuous playback, with a Sony LR03 (size AAA) alkaline battery)
When the battery is drained, playback stops and the power is turned off automatically.
Operations of the buttons and switches may also become disabled. Even if you try to turn on the
power in this state, the LED indicator will not flash and you cannot start playback.
Replace the battery with a new one.
When you turn on the power after replacing the battery, playback starts from the track whose
playback was interrupted by battery drain.
To remove the battery
Remove the battery as illustrated below.
Push and slide the F part.
e
E
Notes on dry batteries
• Do not throw batteries into fire.
• Do not carry batteries with coins or other metallic objects. It can generate heat if the positive
and negative terminals of the battery are accidentally contacted by a metallic object.
• When the player is not to be used for a long time, remove the battery.
• If battery leakage occurs, wipe off any deposit in the battery compartment, and insert a new
battery. In case the deposit adheres to you, wash it off thoroughly.
7
Locating controls
Player (right ear side)
2
1
3
4
5
9 8
7
6
1 “pavit” slot
2 VOL –/+* buttons
3 REP1 (repeat)/SHUF (shuffle) switch
4 HOLD/BEEP switch
6 INPUT jack
7 ./ > (skip) buttons
8 Nx (play/stop)* button
9 LED indicator
5 M.D.S.E (MP3 Digital Sound Enhancer)
switch
* The button has a tactile dot.
8
Basic operations
Listening to music
First, send MP3 files to the “pavit” from your computer using the supplied “Music Transfer pavit
Edition” software. Refer to the separate manual for “Music Transfer pavit Edition” about how to
send MP3 files to the “pavit.”
1. Insert the “pavit” into the player.
Align this projection with the
groove inside the “ pavit” slot.
2. Put the player on your ears.
Note
Remove earrings before wearing the
player to aviod injury.
(Continued)
9
3. Start playback.
1 Press and hold Nx.
The power is turned on, a short beep
is heard in the headphones (when the
HOLD/BEEP switch is set to BEEP
ON) and playback starts.
2 Press VOL –/+ to adjust the
volume.
Audio files (tracks) are played in the
order of the playlist created by the
“Music Transfer pavit Edition”
software.
During play mode, the LED indicator
slowly flashes in green.
Playback stops after the last track has
been played.
10
Other operations
Nx ./>
To
Do this
Go to the beginning of the next track
Go to the beginning of the current track
Go to the beginning of previous tracks
Press
>
.*1
Press ..
Press . repeatedly.*1
To quickly locate the desired track, press and hold
. until you find it.*2
Go to the beginning of succeeding tracks
Adjust the volume
Press
To quickly locate the desired track, press and hold
until you find it.*2
>
repeatedly.*1
>
Press VOL –/+.
Press and hold VOL –/+ to quickly turn up or down
the volume.
Stop playback
Press Nx.*3
Turn off the power
Press and hold Nx.
*1 A short beep sounds for each track. When the first track is reached, the player emits a different beep sound.
*2 While holding down the button, a short beep sounds for each track. When the first track is reached, the
player emits a different beep sound and playback of the first track will start.
*3 The power is automatically turned off if the player is not operated for about 10 seconds while playback is
stopped.
(Continued)
11
If playback does not start
Make sure that the HOLD/BEEP switch is slid in the direction opposite to the arrow (see page
14).
To remove the “pavit”
Always turn off the power before you remove the “pavit.” The audio data or the “pavit” itself
might be destructed if you remove the “pavit” with the player’s power turned on.
Tip
Playback starts from the position where it was last stopped.
To start playback from the first track, press and hold . or
Playback will also start from the first track when:
– you remove the “pavit” and insert a different “pavit.”
– you reset the player (see page 17).
>
to return to the first track.
How to fold the headphones
Fold the headphones as illustrated below.
When you put the player in your bag or pocket to carry it, fold the player.
Moreover, when you are not to use the player for a long time, keep it folded.
12
B Advanced operations
REP1/SHUF
M.D.S.E
Changing the sound
quality (M.D.S.E)
The M.D.S.E (MP3 Digital Sound Enhancer)
allows you to enjoy clear digital sound and a
resonant bass.
Playing a track
repeatedly (REPEAT) /
Playing all tracks in
random order (SHUFFLE)
To
Set the REP1/
SHUF switch to
Set the M.D.S.E switch to ON.
Play the current track
repeatedly*1
REP1
SHUF
Note
Play all tracks in random
order*2
If the sound is distorted when using the M.D.S.E
function, turn down the volume.
*1 After the track has been played 10 times
repeatedly, playback stops.
To return to the normal sound
*2 Playback stops when all the tracks in the “pavit”
have been played.
Set the M.D.S.E switch to OFF.
To return to normal play mode
Set the REP1/SHUF switch to OFF.
13
HOLD/BEEP
Locking the controls
Turning off the beep
sounds (BEEP)
(HOLD)
When carrying the player in a bag, the
HOLD function can be used to prevent
accidental pressing of the buttons.
Set the HOLD/BEEP switch to BEEP
OFF.
Set the HOLD/BEEP switch in the
direction of the arrow.
To turn on the beep sounds
Set the HOLD/BEEP switch to BEEP ON.
A yellow mark behind the switch becomes
visible, and all operation buttons except for
the switches on the right ear side are
disabled.
Note
It is recommended to set the HOLD/BEEP switch
to BEEP ON, as many of your operations can be
confirmed by beep sounds.
To release the HOLD function
Set the HOLD/BEEP switch in the direction
opposite to that of the arrow.
14
Using the player as stereo headphones
You can use the player as a pair of ordinary stereo headphones using an analog connection cord
(not supplied).
When you use the player as stereo headphones, turn off the power of the player.
To prevent wrong operation, we recommend you use the player with the battery
and “pavit” removed.
Connect the player to another audio device.
1
Connect an analog connection cord (not supplied) to the INPUT jack of the player and to the
headphones jack of the other audio device.
INPUT
to the headphones jack
CD player,
cassette recorder,
etc.
Stereo analog connection cord
(not supplied)
Start playback on the other audio device.
2
Adjust the volume on the connected audio device.
Notes
• Even if you press Nx on the player while using as headphones, the sound from the player (“pavit”) will
not be heard.
• You cannot adjust the volume or change the sound quality on this player while using it as the ordinary
headphones.
15
B Additional information
Warning
If there is lightning when you are using your
player, take off the player from your ears
immediately.
Precautions
General
Never place the player in a place:
• under direct sunlight or near heat sources
• in a car with its windows closed
(especially in summer)
• where it will be subjected to excessive
moisture such as in a bathroom
• where there is much dust
Battery
• When the battery is drained, remove the
battery from the player.
• When the player is not to be used for a
long time, remove the battery.
• near magnets or magnetized items such as
speakers or TV
In case of failure of this player, consult your
Aiwa dealer without opening the casing. If
failure occurs while the “pavit” is inserted in
the player, it is recommended not to remove
the “pavit” from the player to ensure an early
solution to the problem.
Road Safety
Do not use this player while driving, cycling,
or operating any motorized vehicle. It may
create a traffic hazard and is illegal in many
areas. It can also be potentially dangerous to
play your player at a high volume while
walking, especially at pedestrian crossings.
You should exercise extreme caution or
discontinue use in potentially hazardous
situations.
Cleaning
Clean your player’s casing with a soft cloth
slightly moistened with water or a mild
detergent solution.
Note
Preventing hearing damage
Do not use any type of abrasive pad, scouring
powder or solvent such as alcohol or benzene as it
may mar the finish of the casing.
Avoid using this player at a high volume.
Hearing experts advise against continuous,
loud and extended play. If you experience a
ringing in your ears, reduce the volume or
discontinue use.
If you have any questions or problems
concerning your player, please consult your
nearest Aiwa dealer.
Consideration for others
Keep the volume at a moderate level. This
will allow you to hear outside sounds and to
be considerate to the people around you.
16
Troubleshooting
If you experience any of the following difficulties while using your player, use this
troubleshooting guide to help you to remedy the problem. Should any problem persist, consult
your nearest Aiwa dealer.
For trouble concerning operations while connected to your computer, also refer to
“Troubleshooting” in the separate manual for the “Music Transfer pavit Edition” software.
Operation
Cause/Remedy
Symptom
c
The volume level is set to the minimum level.
Increase the volume (page 10).
There is no sound.
c
c
c
The HOLD function is activated.
The buttons do not work.
Release the HOLD function (page 14).
The player contains moisture condensation.
Let your player sit for a few hours.
The battery is exhausted.
Replace the battery with a new one (page 7).
c
The HOLD function is activated.
Release the HOLD function (page 14).
The volume will not
increase.
c
c
The bit rate used when encoding the MP3 files was low.
Transfer MP3 files encoded with higher bit rates to the “pavit.”
The M.D.S.E function is turned on.
The sound is distorted.
Turn off the M.D.S.E function (page 13).
c
c
The battery is exhausted.
Replace the battery with a new one (page 7).
Playback stops suddenly.
The audio data itself contains noise.
Noise may have been introduced when creating audio data due to
the conditions of the computer. Create the audio data again.
There is noise in the
playback sound.
c
c
The player is not functioning normally.
Remove the “pavit” from the player and hold down Nx for more
than 5 seconds to reset the player.
Send the audio data to the “pavit” again, as the data stored in the
“pavit” may have been destructed.
The LED indicator flashes red
even though the battery has
just been replaced.
(Continued)
17
Battery
Symptom
Cause/Remedy
Battery life is short.
c
The operating temperature is below 0°C (32°F).
Battery life becomes shorter in cold temperatures due to battery
characteristics. This is not a malfunction.
Other
Symptom
Cause/Remedy
The “ pavit” cannot be
inserted into the player.
c
c
c
The “pavit” is being inserted backwards.
Insert the “pavit” in the correct orientation.
The player gets warm.
The player gets warm if it is used for an extended period of time.
This is not a malfunction.
The “ pavit” which has been
used on another device does
not work.
The “pavit” has been formatted on a computer or other device.
Make a backup copy of any important data in the “pavit,” such as
by copying it to the hard disk of your computer. Then reformat the
“pavit,” using the supplied “Music Transfer pavit Edition”
software. As “Music Transfer pavit Edition” is not compatible with
FAT32 file systems, reformat the “pavit” with FAT or FAT16
format.
To attach the battery compartment lid
Attach as illustrated below.
18
Specifications
Supported audio file format
MP3 Transfer bit rate*: 8 - 320 kbps
Sampling frequencies: 24/22.05/16/12/
11.025/8/32/44.1/48 kHz
* 128 kbps or a higher bit rate is recommended.
Frequency response
20 - 20,000 Hz (single signal measurement)
Power output
USA model: 7 mW + 7 mW
Other models: 3 mW + 3 mW
Input
Stereo mini-jack: 1000 mW + 1000 mW
Operating temperature
5°C - 35°C (41°F - 95°F)
Power source
One LR03 (size AAA) alkaline battery:
1.5 V DC × 1
Battery life
Approx. 11 hours with a Sony LR03 (size AAA)
alkaline battery
Mass
Approx. 129 g (4.5 oz) (including battery)
Accessories
See page 6.
Optional accessories
USB storage media “pavit”
AZ-RM256P: 256 MB
USB storage media “pavit”
AZ-RM128P: 128 MB
Design and specifications are subject to change
without notice.
19
R
Index
Repeat 13
Reset 17
A, B
Battery 7
Beep 14
S
Shuffle 13
Skip 8
C, D, E
Sound 13
Cleaning 16
T, U
F, G
Troubleshooting 17
Format 18
Using as stereo headphones 15
H, I, J, K
V, W, X, Y, Z
HOLD 14
Volume 10, 11
L
Listening 9
Locking the controls (HOLD function) 14
M
M.D.S.E (MP3 Digital Sound Enhancer) 13
MP3 4, 5
Music Transfer pavit Edition 4, 9
N, O, P, Q
“pavit” 4, 5
insert 10
remove 12
Playback 10
Precantions 16
For the customers in the USA
Sony Corporation Printed in Korea
|