Sony Computer Drive CRXP 90MU User Manual

4-665-004-11(1)  
Introduction  
Connecting the Drive to a Personal  
Computer  
Inserting and Removing Memory Stick”  
The CRXP-90MU has the following features:  
L Can read DVD-ROM discs at a speed of  
up to 8×.  
Inserting Memory Stick”  
Connect the drive to a personal computer as  
shown in the illustration below.  
CAUTION  
L Comes equipped with a “Memory Stick”  
slot.  
L Features  
technology to prevent buffer under-run  
errors.  
L Can write CD-R discs at a speed of up to  
L Has a compact, lightweight design for  
portability.  
1 Push “Memory Stick” into the “Memory  
Stick” slot until it is fully inserted.  
Insert “Memory Stick” until you hear a  
click.  
• Be sure to read the Quick Start Guide before  
connecting the CRXP-90MU to the computer the first  
time.  
L Includes a compact, lightweight AC  
adapter that is compatible with power  
supply voltages from 100 to 240 V.  
L Provided with a USB 2.0 interface cable.  
L When connected to a system supporting  
USB 2.0, provides full-performance read  
speeds of up to 24× (3600 KB/s).  
Portable  
CD-RW/DVD-ROM  
• Use only the supplied AC adapter and power cord for  
connections.  
CAUTION  
24×.  
Be careful in what direction “Memory Stick” is  
L Can write CD-RW discs at a speed of up  
Insert in the direction of L  
inserted. Inserting “Memory Stick” in the wrong  
direction may cause damage to the “Memory  
Stick” slot and/or “Memory Stick”.  
Drive  
to 10×.  
L Can read CD-ROM discs at a speed of up  
to AC power outlet  
with “Memory Stick” slot  
to 24×.  
Removing Memory Stick”  
User’s Guide  
Required System Configuration  
CAUTION  
to USB connector on the PC  
Do not remove “Memory Stick” when the “Memory  
Stick” busy indicator is lit. Doing so may cause loss of  
data on “Memory Stick”.  
The CRXP-90MU can be used with a  
personal computer with the following  
specifications:  
CAUTION  
• The required system configuration is designed to  
provide the basic capability to write CD-R and CD-  
RW discs. In order to actually use the CRXP-90MU,  
it is necessary to satisfy not only the system  
requirements described here, but also the system  
requirements that are specified for the writer software.  
(The system requirements for writer software usually  
exceed the system requirements described here.) Refer  
to your Software User’s guides for details.  
• system meeting the following requirements is needed  
in order to use USB 2.0 operation with this drive.  
— USB cable conforming to USB 2.0 (supplied with  
this drive)  
Precautions for USB Connections  
Using the CRXP-90MU with Windows  
1 Make sure that the “Memory Stick” busy  
indicator is off, and then push “Memory  
Stick”.  
Connect the CRXP-90MU directly to a USB  
port on the computer. Operation through a  
hub (including keyboard USB hubs) cannot  
be guaranteed.  
Once the CRXP-90MU has been set up, the  
USB cable can be connected and removed  
while the CRXP-90MU and computer  
remain turned on. However, for Windows,  
Windows PC  
L CPU: Pentium II 400 MHz or faster  
L RAM: At least 64 MB  
we recommend clicking  
or  
on the  
L Hard disk space: 1 GB or more  
L OS: Windows 98 Second Edition  
(Windows 98 SE), Windows 2000  
Professional (Windows 2000), Windows  
Millennium (Windows Me), or Windows  
XP Home Edition or Professional  
(Windows XP)  
L Computer with a USB connector  
L Computer must have a CD-ROM drive or  
be capable of connection to the Internet.  
(Used for installing driver software with  
Windows 98 SE or Windows 2000.)  
task bar and allowing the CRXP-90MU to  
stop before removing the cable.  
2 Move your hand away and remove  
“Memory Stick”.  
When you move your hand away,  
“Memory Stick” partially comes out so  
that you can remove it.  
— Computer that is equipped with a USB  
2.0-compliant USB connector or PCI adapter  
card1), and on which the USB 2.0 EHCI driver  
software2) has been installed.  
Loading and Ejecting Discs  
1) Recommended Product: Adaptec  
Loading a Disc  
“USB2connect” card (AUA-3100LP)  
2) The USB 2.0 EHCI driver software is supplied  
with currently available PCI adapter cards that  
conform to USB 2.0. Further, Microsoft has  
released the USB 2.0 EHCI driver software for  
Windows XP, therefore it is also possible to use  
this driver software with Windows XP. 3)  
3) For details, contact your USB 2.0 adapter dealer  
or consult the Microsoft Corporation Web site.  
• When connected to a product that conforms to the  
earlier USB 1.1 standard, the drive operates at the  
fastest transfer speed allowed under USB 1.1.  
• Macintosh supports USB1.1 only.  
1 Press the eject button to open the top  
cover.  
The top cover will open slightly by  
itself. Lift it all of the way open  
manually.  
Macintosh  
L PowerMac G3, G4, G4 Cube, iMac,  
iBook, PowerBook G3, G4  
L Mac OS 9.0.4, 9.1, 9.2.1  
L At least 64 MB RAM  
CRXP-90MU  
Eject button  
L Macintosh with built in USB connector  
(As of April 2002)  
2002 Sony Corporation  
Printed in Malaysia  
Bumper  
2 Load a disc.  
Push down on the center of the disc until  
the disc clicks into place. Do not press  
too hard. Also, be careful not to touch  
the lens or any other optical parts in the  
drive.  
Names and Functions of Parts  
Main unit  
English  
List of Accessories  
When you unpack the carton, make sure that it contains the and all of the accessories listed  
Please refer to this manual together with the “USB Interface Drive User’s Guide” in the attached Software  
Disc, which carries more detailed information.  
1
below.  
CAUTION  
Français  
If anything is missing or damaged, contact your retailer.  
Disc  
2
When loading a disc, press the disc’s edge against  
the side of the spring-loaded bumper inside the  
disc compartment. Make sure that the disc’s  
recording surface does not sit on top of the bumper  
before closing the drive cover.  
Reportez-vous au présent manuel ainsi qu’au document intitulé “Lecteur d’interface USB-Guide de  
l’utilisateur” contenu sur le disque du logiciel accompagnant ce produit pour plus de détails.  
• CRXP-90MU  
• AC Adapter (AC-CRX85)  
Deutsch  
Einzelheiten entnehmen Sie bitte diesem Handbuch sowie der “Laufwerk mit USB-Schenittstelle-  
Anwenderanleitung” auf der mitgelieferten Software-Disc.  
9
8
7
6
3
4
Español  
Label facing up  
Consulte este manual junto con la “Unidad de interfaz USB-Guía del usuario” del disco de software  
suministrado, que contiene información más detallada.  
Press here.  
Disc  
• USB Cable  
5
Italiano  
Fare riferimento al presente manuale insieme a “Guida dell'utilizzatore dell’unità disco con interfaccia USB”  
nel disco del software allegato, nel quale sono contenute informazioni più dettagliate.  
Português  
3 Close the top cover.  
Consulte este manual juntamente com o “Guia do Utilizador do Drive de Interface USB” incluído no disco de  
software fornecido, para obter informações mais detalhadas.  
1 Top Cover  
7 Eject Button  
You can now access the data on the disc.  
• Power cord  
• Quick Start Guide  
Press this button to open the top cover.  
• User’s Guide  
• Software Discs  
• Ferrite Clamps  
• Software Quick Start Guide  
• Warranty Card  
2 Power Jack (rear of unit)  
Nederlands  
Connect the AC adapter (provided) here.  
Important  
Raadpleeg deze handleiding alsook de “USB Station-interface Gebruikershandleiding” op de bijgevoegde  
Software Disc, die meer gedetaileerde informatie bevat.  
The CRXP-90MU is equipped with an  
electronically powered eject mechanism in order to  
prevent the top cover from being opened  
CAUTION  
Note  
Never connect any AC adapter other than the one  
that was provided with the CRXP-90MU.  
Svenska  
accidentally while the drive is in operation. As a  
result, if the drive is off, pressing the eject button  
will not open the top cover. Furthermore, even  
when the power is on, depending on the status of  
the application that is currently running, the top  
cover might not open for one second or longer  
after the eject button is pressed.  
If the top cover does not open when the eject  
button is pressed (unless the drive is currently  
writing a disc), press the manual eject lever  
(located on the bottom of the drive) in the direction  
indicated by the arrow to open the top cover.  
To guard against possible loss or damage, be sure to make a backup copy of the provided software discs. The software  
discs are not sold separately.  
Press here firmly to close.  
Förutom denna bruksanvisning finns mer information i “Brukanvisning för enhet med USB gränssnitt” på den  
medföljande programskivan.  
3 USB Connector  
Connect the USB cable (provided) here.  
Ejecting a Disc  
Before Connecting the USB Cable  
4 Power Switch  
Attach the ferrite clamps to both ends of the USB cable. To position the center of the ferrite  
clamps as shown in the illustration below, wind the USB cable around it once, and then secure  
the ferrite clamp by closing it until you hear a click.  
1 Press the eject button to open the top cover.  
The top cover will open slightly by itself.  
Use this switch to turn the CRXP-90MU  
on and off.  
You can then manually lift it until it opens fully.  
5 Manual Eject Lever (bottom of unit)  
When the CRXP-90MU is off, push this  
lever in the direction indicated by the  
arrow to open the top cover.  
2 Remove the disc.  
Approximately 8 cm  
Approximately  
8 “Memory Stick” Busy Indicator  
When reading or writing data on  
“Memory Stick”, the indicator lights  
orange.  
Hold one finger against the edge of the  
disc from the side of the CRXP-90MU,  
and press another finger against the  
protrusion in the center of the drive to  
remove the disc.  
8 cm  
6 CD/DVD Busy Indicator  
When the CRXP-90MU is turned on, the  
indicator lights green. When the CD/  
DVD drive is in use, the indicator lights  
orange.  
9 “Memory Stick” Slot  
Insert “Memory Stick” here.  
Note  
CAUTION  
To satisfy radio-frequency interference suppression standards, be sure to install the ferrite clamps correctly. They  
reduce the possibility interference with other devices.  
• Make sure that the disc has stopped spinning  
before removing the disc.  
• Do not open the top cover while the CD/DVD  
busy indicator is orange. Doing so may cause the  
computer to freeze up.  
 

Shindaiwa Trimmer DH231 User Manual
Silex technology Network Card SX 10WAN User Manual
Snapper Snow Blower 555M 555M 15225 E15225 18245E E18245 860E 860M User Manual
Sony Microcassette Recorder CFS 515S User Manual
SOYO Network Card ETEQ82C663 AGP User Manual
Speco Technologies Stereo Amplifier P40A User Manual
Speed Queen Washer LWN311PP111TW01 User Manual
Sterling Plumbing Outdoor Shower 72110100 User Manual
Sylvania Cordless Telephone STC580 User Manual
Sylvania Stereo System SRCD635 User Manual