Sony Clock Radio SY ICF C8WM User Manual

NWZ-A810 series: NWZ-A815/A816/A818  
NWZ-A820 series: NWZ-A826/A828/A829/  
A826K/A828K/A829K  
The “WALKMAN” / Sony Ericsson Phone  
cannot be operated with this unit.  
Notes on radio reception  
To change the sleep timer setting  
You can press SLEEP repeatedly to select the  
desired sleep timer setting even after the sleep  
timer has been activated.  
4-155-637-12(1)  
To activate Automatic DST/Summer Time  
adjustment again, press and hold CLOCK and  
SNOOZE/DATE/SLEEP OFF at the same time  
at least 2 seconds.  
6 If A” or “B” does not appear in the  
To Play a Sony Ericsson  
Phone  
Keep digital music players or mobile phones  
display, press ALARM TIME SET A or B  
Make sure the “WALKMAN” or Sony Ericsson  
away from the AM loop antenna or the FM  
antenna, as this may lead to reception  
interference.  
again.  
Phone is securely connected.  
1 Set your Sony Ericsson Phone on the  
The “WALKMAN” / Sony Ericsson Phone will  
sound at the set time. With the alarm mode  
set to “WALKMAN” / Sony Ericsson Phone,  
when the alarm time met, if “WALKMAN” or  
Sony Ericsson Phone is not attached to the  
unit, the alarm sound will be the buzzer.  
Make sure the Sony Ericsson Phone is listed in  
“Compatible Sony Ericsson Phone models” .  
” and “On” appear in the display to show  
unit.  
To deactivate the sleep timer  
Press SLEEP repeatedly to set the sleep timer to  
“OFF” in step 2.  
When you are listening to the radio with a Sony  
that Automatic DST/Summer Time adjustment  
has been activated. The display returns to the  
clock.  
The connector indicator blinks in a few  
seconds and then stays lit (green).  
When your Sony Ericsson Phone is off, or if it  
is listed in “Compatible Sony Ericsson Phone  
models” , the indicator will turn red. In  
this case, only battery charge function will be  
available (see “To use the unit as a battery  
charger”).  
Ericsson Phone connected to the unit,  
interference with radio reception may occur.  
The “WALKMAN” / Sony Ericsson Phone  
cannot be charged.  
Models using the Type B attachment  
(supplied with this unit)  
NWZ-S510 series: NWZ-S515/S516  
NWZ-S610 series: NWZ-S615F/S616F/S618F  
NWZ-S710 series: NWZ-S715F/S716F/S718F  
NWZ-X1000 series: NWZ-X1050/X1060  
CR2025  
When you are listening to the radio while  
charging a “WALKMAN” / Sony Ericsson  
Phone, interference with radio reception may  
occur.  
Make sure the “WALKMAN” or Sony Ericsson  
Phone is securely connected.  
Connecting external  
equipment  
Notes  
Setting the clock manually  
1 Plug in the unit.  
2 Press and hold CLOCK for at least 2  
The indicator turns red when a compatible  
Sony Ericsson Phone (listed in “Compatible  
Sony Ericsson Phone models” or ) is set  
in the unit.  
Select music library on your “WALKMAN” /  
Sony Ericsson Phone with it connected to this  
unit when you set the alarm mode to  
Notes  
To listen to sound  
Playing a “WALKMAN”  
/ Sony Ericsson Phone  
WALKMAN” / Sony Ericsson Phone.  
Power on the “WALKMAN” / Sony Ericsson  
Phone before connecting to this unit.  
The unit cannot operate while the connector  
seconds.  
Make sure the Sony Ericsson Phone is on.  
FM wire antenna  
Notes  
1 Connect the AUDIO IN jack of the unit  
to the line out jack or headphone jack of  
the external equipment using the audio  
connecting cable (supplied).  
indicator is blinking.  
The year starts to flash in the display.  
Do not attempt to charge the battery.  
If you are not going to use the remote  
commander for a long time, remove the battery  
to avoid any damage that may be caused by  
leakage and corrosion.  
The indicator turns on (green), but the Sony  
Ericsson Phone does not operate.  
If the indicator does not stay lit, remove the  
Sony Ericsson Phone and set again.  
Set Bluetooth function to off on the Sony  
Ericsson Phone.  
3 Press ALARM TIME SET + or –  
You can enjoy “WALKMAN” / Sony Ericsson  
Phone music by connecting to this unit. To use a  
WALKMAN” / Sony Ericsson Phone, refer to the  
users guide of your “WALKMAN” / Sony  
Ericsson Phone.  
FM/AM  
Setting the radio alarm  
Tip  
repeatedly to set the year.  
Make sure the Sony Ericsson Phone is a  
The type of attachment is located on the bottom.  
compatible model (listed in “Compatible Sony  
1 Perform steps 1 to 8 in “To set the  
alarm.”  
4 Press CLOCK.  
AC power  
cord  
On copyrights  
Ericsson Phone models” or ).  
2 Press (play).  
5 Repeat steps 3 and 4 to set the month,  
Clock Radio  
WALKMAN” and  
are  
” appears in the display.  
2 Press ALARM TIME SET A or B to select  
When Daylight Saving Time (summer time)  
begins, the clock does not employ the  
Daylight Saving Time automatically.  
day, hour and minute, and then press  
registered trademarks of Sony Corporation.  
All other trademarks and registered trademarks  
are trademarks or registered trademarks of  
their respective holders. In this manual,  
and marks are not specified.  
The Sony Ericsson Phone begins to play  
automatically. You can operate the connected  
Sony Ericsson Phone by this unit or the Sony  
Ericsson Phone buttons.  
To select the connector of the  
“WALKMAN” / Sony Ericsson  
Phone  
“RADIO” alarm mode.  
CLOCK.  
About the backup  
battery  
“VOLappears in the display.  
The seconds start incrementing from zero.  
Make sure the clock is set correctly.  
Press and hold CLOCK and SNOOZE/DATE/  
SLEEP OFF simultaneously for at least  
2 seconds to activate the Automatic DST  
function.  
3 Press ALARM TIME SET + or to adjust  
Notes  
®
If you do not press any button for about  
1 minute while setting the clock, the clock  
setting will be canceled.  
A calendar is installed in this unit. When the  
date is set, the day of the week is automatically  
displayed.  
SUN = Sunday, MON = Monday,  
TUE = Tuesday, WED = Wednesday,  
THU = Thursday, FRI = Friday, SAT = Saturday  
the volume.  
Note  
To keep accurate time, this unit contains a  
CR2032 battery as a backup power source.  
The battery keeps the clock and the alarm  
operating in the event of a power interruption.  
This unit has two connectors for a “WALKMAN”  
and a Sony Ericsson Phone.  
Audio connecting cable  
(supplied)  
Operating Instructions  
Mode d’emploi (au dos)  
If the Sony Ericsson Phone is listed in  
4 Press ALARM TIME SET A or B.  
Band (“FM” or AM”) or “– –” flashes.  
“– –” is the last station received.  
“Compatible Sony Ericsson Phone models” ,  
certain operations may not be performed by the  
buttons on this unit. In this case, operate with the  
buttons on the Sony Ericsson Phone.  
Select the connector before using “WALKMAN” /  
Sony Ericsson Phone according to the following  
procedures.  
Compatible Sony  
To external  
equipment  
5 Press ALARM TIME SET + or to select  
Ericsson Phone models  
Note for customers in  
Canada  
the desired band or “– –.”  
Specifications  
Time display  
12-hour system  
Compatible Sony Ericsson Phone models are as  
follows.  
2 Press AUDIO IN to display AUDIO IN.”  
3 Play the equipment connected to the  
AUDIO IN jack.  
Note  
ICF-C8WM  
If you select “– –,” jump to step 8.  
3 Adjust the volume using VOLUME + or  
A “WALKMAN” and Sony Ericsson Phone  
cannot be used at the same time.  
The clock is preset at the factory, and its memory  
is powered by the preinstalled Sony CR2032  
battery. If the AM 12:00” appears on the display  
when the unit is connected to AC outlet for the  
first time, the battery may be weak. In this case,  
consult a Sony dealer. The preinstalled CR2032  
battery is considered part of the product, and is  
covered by the warranty. You are required to show  
“Note for customers in Canada” (in this  
6 Press ALARM TIME SET A or B.  
(VOL + or on the remote).  
The preset number flashes.  
Model(s)  
Available  
To display the year and date  
“WALKMAN” / Sony Ericsson Phone  
4
Adjust the volume using VOLUME + or –  
(VOL + or on the remote)  
1 Pull the Docking Tray all the way out.  
To  
Press  
7 Press ALARM TIME SET + or to select  
function(s)  
Press SNOOZE/DATE/SLEEP OFF once for the  
date, and press it again for the year.  
section  
“WALKMAN”:  
DC out: 5V  
MAX: 500mA  
Sony Ericsson Phone:  
DC out: 5V  
MAX: 600mA  
Radio section  
.
Stop playback  
Go to the next track  
OFF  
the desired preset number.  
C510/C510a/C702/C702a/ Alarm/  
“WALKMANconnector  
The setting is entered.  
Dream Machine is a trademark of Sony Corporation.  
Dream Machine est une marque de fabrique de Sony Corporation.  
C902/C903  
Music  
(forward)  
After a while, the display will change back to the  
current time automatically.  
To return to the radio  
Sony Ericsson Phone  
connector  
8 If A” or “B” does not appear in the  
G700/G700Busir/G900  
K530i/K550i/K550im/  
K610i/K610im/K618i/  
K770i/K790a/K800i/  
K810i  
playback/  
Battery  
charge  
Go back to the previous  
track  
Press RADIO BAND.  
(backward)  
display, press ALARM TIME SET A or B  
The frequency is shown in the display.  
again.  
Locate a point while  
listening to the sound*  
(forward) or  
(backward)  
while playing and  
hold it until you  
find the point.  
To return to the “WALKMAN” / Sony  
Ericsson Phone  
Press (play).  
instruction) to a Sony dealer in order to validate  
the warranty for this product.  
The radio will turn on at the set time.  
Setting the brightness  
of the display  
Setting the buzzer alarm  
The (play) and VOLUME + buttons have a tactile dot.  
The “ ” mark in the display indicates that the “WALKMAN” or Sony Ericsson Phone function  
is activated.  
S500i  
Note for customers in the  
USA  
Frequency range  
1 Perform steps 1 to 8 in “To set the  
alarm.”  
No Power No Problem is a trademark of Sony Corporation.  
No Power No Problem est une marque de fabrique de Sony Corporation.  
T650i/T700/T707/TM506  
V630i  
Three levels of brightness are available by pressing  
To stop listening  
Press OFF/ALARM RESET (OFF on the remote),  
and stop playback on the connected unit.  
2 Press SELECT to select the  
Band  
FM  
Frequency  
Channel step  
BRIGHTNESS/TIME ZONE.  
WALKMAN” or Sony Ericsson Phone  
* This function may not be available on some  
models. If the function does not work, press  
(play) to cancel.  
If AM 12:00” flashes in the display when the unit  
is connected to AC outlet for the first time, the  
battery may be weak. In this case, consult your  
Sony dealer.  
2 Press ALARM TIME SET A or B to select  
©2009 Sony Corporation  
Printed in China  
87.5 – 108 MHz 0.1 MHz  
530 – 1 710 kHz 10 kHz  
W508/W580i/W595/  
W610i/W660i/W710i/  
W760a/W760i/W850i/  
W880i/W980/W995/  
W995a  
connector.  
“BUZZER” alarm mode.  
The indicator turns on to indicate the  
WALKMAN” or Sony Ericsson Phone  
connector is activated.  
Notes  
AM  
The setting is entered.  
Refer also to the connected equipments manual.  
The supplied audio connecting cable may not  
be used with some external equipment. In this  
case, use a cord suitable for the external  
equipment you are using.  
When you listen to the radio with external  
equipment connected, turn off the connected  
equipment to prevent noise. If noise occurs,  
even when the equipment is turned off,  
disconnect and place the external equipment  
away from the unit.  
Notes  
General  
Speaker  
3 If A” or “B” does not appear in the  
The volume may be low when the volume of  
Sony Ericsson Phone is set to low. In this case,  
adjust the volume of Sony Ericsson Phone.  
When removing the Sony Ericsson Phone, hold  
the Docking Tray securely with one hand and  
tilt the phone forward.  
Knowing when to replace the  
battery  
display, press ALARM TIME SET A or B  
Playing the radio  
–Manual tuning  
1 Press RADIO BAND to turn on the radio  
and select the AM or FM band.  
2 Press TUNING + or (TUNE + or on  
the remote) to tune in to a desired  
frequency.  
Approx. 3.8 cm (1 1/2 inches) dia. 8 Ω  
— Consult the dealer or an experienced radio/TV  
technician for help.  
again.  
Input  
Z610i/Z710i  
The buzzer will sound at the set time.  
When the battery becomes weak, “” appears in  
the display.  
AUDIO IN jack (ø 3.5 mm stereo minijack)  
Power output  
0.8 W (at 10% harmonic distortion)  
Power requirements  
120 V AC, 60 Hz  
For clock back up: 3V DC, CR2032 battery (1)  
Note  
WARNING  
C901/C905  
Music  
The volume cannot be set for the buzzer alarm.  
Replace the battery for the clock backup with a  
If a power interruption occurs while the battery is  
weak, the current time and alarm will be  
initialized.  
G502/G705/G705u  
playback/  
Sony CR2032 lithium battery, and the battery  
for the remote commander with a Sony CR2025  
lithium battery. Use of another battery may  
present a risk of fire or explosion.  
K310i/K320i/K510i/K630i/ Battery  
K660i/K750i/K850i  
M600i  
P1i/P990i  
V640i  
To confirm an alarm time setting  
Press ALARM TIME SET + or . The setting will  
be displayed for about 4 seconds.  
charge  
Replace the battery with a Sony CR2032 lithium  
battery. Use of another battery may cause a fire or  
explosion.  
English  
Battery may explode if mistreated. Do not  
Dimensions  
To change an alarm setting  
3 Adjust the volume using VOLUME + or  
recharge, disassemble or dispose of in fire.  
Approx. 167 × 124.7 × 97.1 mm (w/h/d)  
Press and hold ALARM TIME SET + for at least  
2 seconds to move the alarm time forwards. Press  
and hold ALARM TIME SET – for at least  
2 seconds to move the alarm time back.  
W200i/W300i/W700i/  
W705/W810i/W890i/  
W902/W910i/W950i/  
W960i  
Z530i/Z550a/Z550i/Z558i  
Z750i/Z770i  
Replacing the battery  
Troubleshooting  
Owners Record  
(U.S. only)  
Dispose of used battery promptly. Keep away  
(VOL + or on the remote).  
(6 5/8 × 4 15 16 × 3 7/8 inches) including projecting  
/
from children.  
parts and controls  
Mass  
1 Keep the AC plug connected to the AC  
outlet, remove the screw that secures the  
battery holder at the bottom of the unit  
using a screwdriver, and remove the  
battery holder (see Fig.).  
Replace a new battery in the battery holder  
with the side facing up (see Fig.)  
3 Insert the battery holder back into the  
unit and secure it with the screw  
(see Fig.).  
Should any problem persist after you have made  
the following checks, consult your nearest Sony  
dealer.  
Tuning in to a station  
The unit automatically scans AM or FM stations.  
Note  
e model number and the serial number are located on the  
bottom.  
Important Safety  
Instructions  
The Sony Ericsson Phone connector is selected by  
the default setting.  
Approx. 988 g (2 lb 2.9 oz) including power  
supply unit  
Supplied accessories  
Remote commander (1)  
AM loop antenna (1)  
Audio connecting cable (1)  
Attachment for “WALKMAN” (2)  
To use the unit as a battery  
charger  
When you release the button, the changed time  
will be displayed for about 2 seconds. To change  
the alarm time again, press ALARM TIME SET +  
or within these 2 seconds, otherwise the setting  
change will be fixed as displayed.  
Record the serial number in the space provided below. Refer  
to them whenever you call upon your Sony dealer regarding  
this product.  
1 Press RADIO BAND to turn on the radio  
to select the AM or FM band.  
The clock flashes “AM 12:00” due to a power  
interruption.  
1) Read these instructions.  
You can use the unit as a battery charger.  
Charging begins when the “WALKMAN” or Sony  
Ericsson Phone is connected to the unit.  
Charging status appears in the “WALKMAN” or  
Sony Ericsson Phone display. For details, see the  
users guide of your “WALKMAN” or Sony  
Ericsson Phone.  
F305  
Battery  
charge  
To Play a “WALKMAN”  
2) Keep these instructions.  
The battery is low. Replace the battery. Remove  
the old battery and install a new one.  
Model No. ICF-C8WM  
J110i/J120i  
2 Press and hold TUNING + or (TUNE +  
3) Heed all warnings.  
2
1 Choose the “WALKMAN” attachment  
K200i/K330  
4) Follow all instructions.  
Serial No.________________________________  
or on the remote).  
.
that fits your “WALKMAN” (see  
To doze for a few more minutes  
Press SNOOZE/DATE/SLEEP OFF.  
The sound turns off but will automatically come  
on again after about 10 minutes.  
You can change the snooze time by pressing  
SNOOZE/DATE/SLEEP OFF repeatedly within  
4 seconds.  
The maximum length of the snooze time is  
60 minutes.  
To stop the snooze timer, press OFF/ALARM  
RESET (OFF on the remote).  
R300  
5) Do not use this apparatus near water.  
6) Clean only with dry cloth.  
7) Do not block any ventilation openings.  
Install in accordance with the manufacturers  
instructions.  
The radio, “WALKMAN” / Sony Ericsson  
Phone or buzzer alarm does not sound at the  
preset alarm time.  
+: scans upward through the frequency bands.  
–: scans downwards through the frequency  
bands.  
“Compatible “WALKMAN” models”).  
2 Insert the tab on the left side of the  
attachment () into the left slot in the  
WALKMAN” connector, and then press  
down into the unit ().  
S302/S312  
Design and specifications are subject to change  
without notice.  
For customers who purchased this product in the  
USA  
T250i/T280i/T303  
W302/W350i/W380i/W395  
Z310a/Z310i/Z555i  
Check that alarm A” or alarm “B” is properly  
displayed.  
Please register this product on line at  
Proper registration will enable us to send you  
periodic mailings about new products, services,  
and other important announcements. Registering  
your product will also allow us to contact you  
in the unlikely event that the product needs  
adjustment or modification. ank you.  
Scanning starts from the currently-tuned  
frequency. When a station is received,  
scanning stops.  
Note  
4 Press (play), RADIO BAND, AUDIO IN  
or SNOOZE/DATE/SLEEP OFF to turn  
” off in the display.  
8) Do not install near any heat sources such as  
radiators, heat registers, stoves, or other  
apparatus (including amplifiers) that produce  
heat.  
9) Do not defeat the safety purpose of the  
polarized or grounding-type plug. A polarized  
plug has two blades with one wider than the  
other. A grounding type plug has two blades  
and a third grounding prong. The wide blade  
or the third prong are provided for your safety.  
If the provided plug does not fit into your  
outlet, consult an electrician for replacement  
of the obsolete outlet.  
10)Protect the power cord from being walked on  
or pinched particularly at plugs, convenience  
receptacles, and the point where they exit  
from the apparatus.  
11)Only use attachments/accessories specified by  
the manufacturer.  
A “WALKMAN” and Sony Ericsson Phone  
cannot be charged at the same time. Only the  
selected device (connector indicator on) can be  
charged.  
The radio or “WALKMAN” / Sony Ericsson  
Phone alarm is activated but no sound comes  
on at the preset alarm time.  
3 Adjust the volume using VOLUME +  
or (VOL + or on the remote).  
Setting the clock for  
the first time  
Note  
Check the alarm volume setting.  
When you replace the battery, do not disconnect  
the plug from the AC outlet. Otherwise, the  
calendar, current time, alarm and station presets  
will be initialized.  
–Preset tuning  
There is no sound from the “WALKMAN” /  
Sony Ericsson Phone.  
WARNING  
To reduce the risk of fire or electric shock, do  
not expose this apparatus to rain or  
moisture.  
To reduce the risk of fire, do not cover the  
ventilation of the apparatus with newspapers,  
tablecloths, curtains, etc. And do not place lighted  
candles on the apparatus.  
To reduce the risk of fire or electric shock, do not  
expose this apparatus to dripping or splashing,  
and do not place objects filled with liquids, such  
as vases, on the apparatus.  
This unit is preset to the current EST (Eastern  
Standard Time) at the factory, and is powered by a  
backup battery. All you need to do the first time is  
just plug it in and select your time zone.  
You can preset 20 stations for FM and 10 stations  
for AM.  
To stop the alarm  
Setting the alarm  
Make sure the “WALKMAN” or Sony Ericsson  
Press OFF/ALARM RESET (OFF on the remote)  
to turn off the alarm.  
This clock radio is equipped with 3 alarm  
modes—“WALKMAN” / Sony Ericsson Phone,  
radio and buzzer. Before setting the alarm, make  
sure to set the clock (see “Setting the clock for the  
first time”).  
Phone is securely connected.  
Presetting a station  
Select music library on your “WALKMAN” /  
Sony Ericsson Phone.  
The alarm will sound again at the same time the  
next day.  
3 Set your “WALKMAN” on the unit.  
1 Follow steps 1 and 2 in “Manual tuning”  
to tune the frequency you wish to preset.  
2 Press and hold DISPLAY/MEMORY for  
at least 2 seconds.  
1 Plug in the unit.  
The current EST (Eastern Standard Time)  
appears in the display.  
There is no sound from the Sony Ericsson  
Phone.  
To deactivate the alarm  
Press ALARM TIME SET A or B to turn off the  
alarm A or B indicator from the display.  
Note  
2 Press and hold BRIGHTNESS/TIME  
Make sure the Sony Ericsson Phone is listed in  
“Compatible Sony Ericsson Phone models”   
or .  
Power on the Sony Ericsson Phone.  
Adjust the volume of the Sony Ericsson Phone.  
Set Bluetooth function to off on the Sony  
Ericsson Phone.  
Alarm function is available only for the models  
listed in “Compatible Sony Ericsson Phone  
models” .  
ZONE for at least 2 seconds.  
3 Press PRESET + or to select the preset  
To activate the alarm  
Press ALARM TIME SET A or B to turn on the  
alarm A or B indicator in the display.  
Area number “2” flashes in the display.  
number, then press DISPLAY/MEMORY.  
The frequency is stored with the selected  
preset number.  
The and VOL + buttons have a tactile dot.  
3 Press ALARM TIME SET + or –  
repeatedly to select the number as  
follows:  
To set the alarm  
12)Use only with the cart, stand, tripod, bracket,  
or table specified by the manufacturer, or sold  
with the apparatus. When a cart is used, use  
caution when moving the cart/apparatus  
combination to avoid injury from tip-over.  
Do not install the appliance in a confined space,  
such as a bookcase or built-in cabinet.  
Notes  
1 Press and hold ALARM TIME SET A or  
If the same alarm time is set for both alarm A  
and B, alarm A takes priority.  
Example: The following display appears  
when you preset FM 105.8 MHz to preset  
number 1 for FM.  
B for at least 2 seconds.  
WAKE UP” appears and the hour flashes in  
the display.  
Reset button  
CR2032  
Do not expose the batteries (battery pack or  
batteries installed) to excessive heat such as  
sunshine, fire or the like for a long time.  
Area number Time zone  
NOTES ON LITHIUM BATTERY  
3 Connect the cords to the AM antenna  
If there is no operation while the alarm is  
occurring, the alarm will stop after about  
60 minutes.  
The connector indicator blinks for a few  
seconds and then stays lit.  
Wipe the battery with a dry cloth to assure a  
good contact.  
1
Atlantic standard Time  
Eastern standard Time  
terminals.  
Cord (A) or cord (B) can be connected to  
either terminal.  
Insert the cord while  
pushing down the  
terminal clamp.  
2 Press ALARM TIME SET + or –  
2
Be sure to observe the correct polarity when  
installing the battery.  
Do not hold the battery with metallic tweezers,  
otherwise a short-circuit may occur.  
As the main plug is used to disconnect the unit  
from the mains, connect the unit to an easily  
accessible AC outlet. Should you notice an  
abnormality in the unit, disconnect the main plug  
from the AC outlet immediately.  
Notes  
repeatedly until the desired hour  
Note on the alarm in the event of a power  
interruption  
In the event of a power interruption, the alarm  
will work until the battery is totally discharged.  
However, certain functions will be affected as  
follows:  
(default setting)  
The unit cannot operate while the connector  
appears.  
indicator is blinking.  
3
4
5
6
7
Central standard Time  
Mountain standard Time  
Pacific standard Time  
Yukon standard Time  
Hawaiian standard Time  
This warranty is valid only in the United States.  
Cette garantie n’est valide qu’aux États-Unis.  
To cycle the hour rapidly, press and hold  
ALARM TIME SET + or .  
If the indicator does not stay lit, remove the  
WALKMAN” and set again.  
When removing the “WALKMAN,” hold the  
Docking Tray securely with one hand.  
13)Unplug this apparatus during lightning storms  
or when unused for long periods of time.  
14)Refer all servicing to qualified service  
personnel. Servicing is required when the  
apparatus has been damaged in any way, such  
as power-supply cord or plug is damaged,  
liquid has been spilled or objects have fallen  
into the apparatus, the apparatus has been  
exposed to rain or moisture, does not operate  
normally, or has been dropped.  
For the state of california, USA only  
Perchlorate Material –special handling may apply, See  
Perchlorate Material: Lithium battery contains  
perchlorate  
If you have any questions or problems concerning  
your unit, please consult your nearest Sony dealer.  
3 Press ALARM TIME SET A or B.  
The unit is not disconnected from the AC power  
source (mains) as long as it is connected to the  
wall outlet, even if the unit itself has been turned  
off.  
The minute flashes.  
Only insert up  
The backlight will not light up.  
to here.  
4 Repeat step 2 to set the minute.  
B
If the alarm mode is set to “WALKMAN” /  
Sony Ericsson Phone or radio, it will change to  
buzzer automatically.  
4 Press (play).  
A
Features  
5 Press ALARM TIME SET A or B.  
” appears in the display.  
4 Press BRIGHTNESS/TIME ZONE to set.  
The days of the week flash.  
The “WALKMAN” begins to play  
automatically. You can operate the connected  
WALKMAN” by this unit or the  
WALKMAN” buttons.  
You are cautioned that any changes or  
modifications not expressly approved in this  
manual could void your authority to operate this  
equipment.  
Clock Radio with “WALKMAN” / Sony  
Ericsson Phone compatible  
Wake or Sleep to “WALKMAN” / Sony Ericsson  
Phone / Radio  
If a power interruption occurs while the alarm  
is sounding, the alarm will stop.  
If OFF/ALARM RESET is not pressed, the alarm  
will sound for about 5 minutes.  
If “” appears in the display, the alarm will not  
sound in the event of a power interruption.  
Replace the battery if “” appears.  
The snooze function will not work.  
During a power interruption, each alarm will  
sound at the set time only once.  
Note  
6 Repeat step 2 to set the days of the week.  
You can select the days from the following  
three options:  
Though the clock is correctly set at the factory,  
discrepancies may arise during transport or  
storage. If necessary, set the clock to the correct  
time by referring to “Setting the clock manually.”  
The display shows the frequency for about  
10 seconds, and then returns to the current  
time.  
4 Make sure the AM loop antenna is  
Every day: SUN MON TUE WED THU FRI  
SAT  
Week day: MON TUE WED THU FRI  
Week end: SUN SAT  
Easy to set A-B alarm  
5 Adjust the volume using VOLUME + or  
CAUTION  
Danger of explosion if battery is incorrectly  
replaced. Replace only with the same type.  
2-5-7 day alarm  
connected firmly by pulling softly.  
(VOL + or on the remote).  
LCD Brightness control  
To preset another station, repeat these steps.  
When Daylight Saving Time  
(summer time) begins  
Wireless Remote commander  
To  
Press  
Adjusting the AM loop antenna  
Find a place and an orientation that provide good  
reception.  
Do not place the AM loop antenna near the  
unit or other AV equipment, as noise may  
result.  
Note  
7 Press ALARM TIME SET A or B.  
Stop playback  
Go to the next track  
OFF  
If you try to store another station with the same  
preset number, the previously stored station will  
be replaced.  
If the time in the display is  
incorrect after the battery is  
changed (Reset)  
The alarm mode setting is entered.  
This model automatically adjusts for Daylight  
Saving Time (summer time).  
(forward)  
8 Press ALARM TIME SET + or –  
repeatedly until the desired alarm mode  
flashes.  
Connecting the  
antenna  
Precautions  
Go back to the previous  
track  
” is displayed from the beginning of Daylight  
(backward)  
Play the unit on the power source specified in  
Saving Time (summer time) and disappears at the  
end of Daylight Saving Time (summer time)  
automatically.  
is symbol is intended to alert the user  
to the presence of uninsulated “dangerous  
voltage” within the product’s enclosure that  
may be of sufficient magnitude to constitute  
a risk of electric shock to persons.  
Tuning in to a preset station  
1 Press RADIO BAND to turn on the radio  
and select the AM or FM band.  
2 Press PRESET + or to select the desired  
preset number.  
Press the reset button with a pointed instrument.  
The reset button is in the small hole located near  
the battery holder.  
Setting the sleep timer  
“Specifications.”  
Locate a point while  
listening to the sound  
(forward) or  
(backward)  
while playing and  
hold it until you  
find the point.  
Tip  
You can choose one of 3 settings: “  
,”  
To disconnect the AC power cord (mains lead),  
pull it out by the plug, not the cord.  
To connect the AM loop  
antenna  
You can fall asleep to music, etc., using the built-  
in sleep timer that turns off the unit automatically  
after a preset duration.  
Adjust the direction of the AM loop antenna for  
best AM broadcast sound.  
“RADIO” or “BUZZER.” Set the alarm mode  
as follows:  
Daylight Saving Time (summer time) begins at:  
2:00 AM on the second Sunday of March.  
Standard time begins at: 2:00 AM on the first  
Sunday of November.  
Since a strong magnet is used for the speaker,  
keep personal credit cards using magnetic coding  
or spring-wound watches away from the unit to  
prevent possible damage from the magnet.  
Do not leave the unit in a location near a heat  
source such as a radiator or airduct, or in a  
place subject to direct sunlight, excessive dust,  
mechanical vibration, or shock.  
– “  
”: see “Setting the “WALKMAN” /  
is symbol is intended to alert the user to  
the presence of important operating and  
maintenance (servicing) instructions in the  
literature accompanying the appliance.  
The shape and the length of the antenna is  
designed to receive AM signals. Do not dismantle  
or roll up the antenna.  
Sony Ericsson Phone alarm.”  
1 Press SLEEP while the unit is turned on.  
“SLEEP” appears and the sleep time flashes in  
the display.  
Compatible  
– RADIO: see “Setting the radio alarm.”  
– BUZZER: see “Setting the buzzer alarm.”  
Tip  
3 Adjust the volume using VOLUME + or  
Preparing the remote  
commander  
To cancel Automatic DST/Summer Time  
adjustment during the Daylight Saving  
Time (summer time) period  
The Automatic DST/Summer Time adjustment  
can be canceled.  
Press and hold CLOCK and SNOOZE/DATE/  
SLEEP OFF at the same time at least 2 seconds  
while the clock is displayed.  
“WALKMAN” models  
To remove the “WALKMAN” attachment, press  
firmly down on the area marked (ooo) (), and  
remove (), as shown in the illustration.  
(VOL + or on the remote).  
1 Remove only the loop part from the  
plastic stand.  
2 Set up the AM loop antenna.  
2 Press SLEEP to set the sleep timer  
Setting the “WALKMAN” / Sony  
Use the Oval attachment (supplied with your  
WALKMAN”) when you connect it to this unit.  
If the Oval attachment is not supplied with your  
WALKMAN,” use one of the attachments  
supplied with this unit. “WALKMAN” models  
compatible with this unit are as follows.  
NOTE  
Before using the card remote commander for the  
first time, remove the insulation film.  
–Auto preset tuning  
Ericsson Phone alarm  
duration.  
This equipment has been tested and found to  
comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection  
against harmful interference in a residential  
installation. This equipment generates, uses and  
can radiate radio frequency energy and, if not  
installed and used in accordance with the  
Each time you press SLEEP, the duration (in  
minutes) changes as follows:  
Allow adequate air circulation to prevent  
internal heat build-up. Do not place the unit on  
a surface (a rug, a blanket, etc.) or near  
materials (a curtain) which might block the  
ventilation holes.  
Should any solid object or liquid fall into the unit,  
unplug the unit and have it checked by qualified  
personnel before operating it any further.  
To clean the casing, use a soft cloth dampened  
with a mild detergent solution.  
Never touch the wire of the external FM  
antenna during a thunderstorm. Furthermore,  
immediately disconnect the AC power cord  
from the radio.  
1 Press RADIO BAND to turn on the radio  
1 Perform steps 1 to 8 in “To set the  
alarm.”  
2 Press SELECT on the Docking Tray to  
select the “WALKMAN” or Sony  
Ericsson Phone connector.  
and select the AM or FM band.  
90  
60  
30  
15  
2 Press and hold RADIO BAND until AP”  
appears in the display.  
3 Press DISPLAY/MEMORY.  
The unit automatically presets the available  
channels in order.  
OFF  
Models using the Oval attachment  
” and “OFF” appear in the display to show that  
The display returns to clock mode for about  
4 seconds after you have finished the duration  
setting and released SLEEP, and then the sleep  
timer starts.  
The unit will play for the duration you set, and  
then shut off.  
(supplied with your “WALKMAN”)  
NWZ-E440 series: NWZ-E443/E444/E445/  
E443K/E444K  
NWZ-S540 series: NWZ-S544/S545  
Models using the Type A attachment  
Automatic DST/Summer Time adjustment has  
been canceled. The display returns to the clock.  
When to replace the battery  
3 Press ALARM TIME SET A or B to select  
With normal use, the battery (CR2025) should  
last for about six months. When the remote  
commander no longer operates the unit, replace  
the battery with a new one.  
instructions, may cause harmful interference to  
radio communications. However, there is no  
guarantee that interference will not occur in a  
particular installation. If this equipment does  
cause harmful interference to radio or television  
reception, which can be determined by turning  
the equipment off and on, the user is encouraged  
to try to correct the interference by one or more  
Notes  
alarm mode.  
Changes to Automatic DST/Summer Time  
adjustment by the unit (see above) are subject  
to circumstances and laws in each country/  
region. Should this interfere with desired  
adjustment, cancel the Automatic DST/Summer  
Time adjustment and set the DST display  
manually as necessary. Customers living in a  
country/region that does not use Daylight  
Saving Time (summer time) must cancel  
Automatic DST/Summer Time adjustment  
before using the unit.  
“VOLflashes in the display.  
4 Press ALARM TIME SET + or to adjust  
the volume.  
Improving the reception  
(supplied with this unit)  
To turn off the unit before the preset  
NWZ-E430 series: NWZ-E435F/E436F/E438F  
NWZ-S630 series: NWZ-S636F/S638F/S639F/  
S636FK  
FM:  
5 Press ALARM TIME SET A or B.  
time  
Extend the FM wire antenna fully to increase  
The setting is entered.  
Press SNOOZE/DATE/SLEEP OFF or OFF/  
ALARM RESET (OFF on the remote).  
reception sensitivity.  
NWZ-S730 series: NWZ-S736F/S738F/S739F  
NWZ-A720 series: NWZ-A726/A726B/A728/  
A728B/A729  
AM:  
of the following measures:  
Connect the supplied AM loop antenna to the  
unit. Rotate the antenna horizontally for  
optimum reception.  
— Reorient or relocate the receiving antenna.  
— Increase the separation between the equipment  
and receiver.  
NW-A800 series: NW-A808/A806/A805  
This unit includes a preinstalled Sony Lithium battery (CR2032) as back-up power source for the clock, which is preset  
to EST (Eastern Standard Time) at the factory. And this battery is considered part of the product.  
— Connect the equipment into an outlet on a circuit  
different from that to which the receiver is  
connected.  
 

Sharp Speaker System HT SB60 User Manual
SIIG Computer Hardware PCI 4S User Manual
Sony Battery Charger MPA BT1A User Manual
Sony Digital Camera XC ES50 50CE User Manual
Sony Ericsson Bluetooth Headset HBH IS800 User Manual
Soundstream Technologies Speaker TRX10000 User Manual
Spectra Watermakers Water System Newport 400 User Manual
State Industries Water Heater 186589 001 User Manual
Sunbeam Oven BT4400 User Manual
Sylvania DVD VCR Combo DVC850C User Manual