EM 3032
RF Wireless Systems | 3000 Series Receivers
EM 3032-U Cat. No. 009264
EM 3032-V Cat. No. 009290
General Description
The EM 3032 consists of two complete true diversity receivers in a single 19” 1 U rack
housing. 32 programmable receiving frequencies per receiver ensure flexible chan-
nel selection and make this receiver an ideal choice for OB applications or for use in
shows.
Technical Data EM 3032-U
Type of receiver ..................................Two 32-channel RX
Receiving frequencies .............................................max. 32
Frequency range...........................................450–960 MHz
Switching bandwidth.............................................. 24 MHz
Modulation...................................................... wideband FM
Nominal/peak deviation ................ 40 kHz / 56 kHz
RF squelch ....................................... 0–100 µV, adjustable
Signal-to-noise ratio .................................. > 117 dB(A)rms
Noise reduction system ................................. HiDyn plus™
AF frequency response............... 45–20,000 Hz (–3 dB)
THD (1 kHz) ........................................ ≤ 0.4 % (typ. 0.2 %)
RF inputs.............................................. 2 BNC sockets, 50 Ω
AF output voltage,
balanced XLR:.............................max. 18 dBU, adjustable
Headphone output....................max. 12 dBU, adjustable
Output impedance..................................................... ≥ 50 Ω
Power supply ...............115 / 230 V AC (+10 % / –15 %)
Housing.......................................................................19“, 1 U
Dimensions .......................................... 436 x 43 x 215 mm
Weight................................................................ approx. 4 kg
In compliance with ......................................... ETS 300 422
General Features
Technical Data EM 3031-V
Up to 32 programmable receiving frequencies per receiver
Switching bandwidth max. 24 MHz (UHF) or 7 MHz (VHF)
HiDyn plus™ noise reduction system with 117 dB(A)rms signal-to-noise ratio
Multi-function LC display panel
Indication of transmitter battery status (only with Sennheiser
transmitters transmitting battery status information)
19” 1 U metal housing with built-in mains power supply unit
Suitable for multi-channel applications
Type of receiver ..................................Two 32-channel RX
Receiving frequencies .............................................max. 32
Frequency range...........................................138–250 MHz
Switching bandwidth.................................................7 MHz
Modulation...................................................... wideband FM
Nominal/peak deviation ................ 40 kHz / 56 kHz
RF squelch ....................................... 0–100 µV, adjustable
Signal-to-noise ratio .................................. > 117 dB(A)rms
Noise reduction system ................................. HiDyn plus™
AF frequency response............... 45–20,000 Hz (–3 dB)
THD (1 kHz) ........................................ ≤ 0.4 % (typ. 0.2 %)
RF inputs.............................................. 2 BNC sockets, 50 Ω
AF output voltage,
balanced XLR:.............................max. 18 dBU, adjustable
Headphone output....................max. 12 dBU, adjustable
Output impedance..................................................... ≥ 50 Ω
Power supply ...............115 / 230 V AC (+10 % / –15 %)
Housing.......................................................................19“, 1 U
Dimensions .......................................... 436 x 43 x 215 mm
Weight................................................................ approx. 4 kg
In compliance with ......................................... ETS 300 422
EM 3032
Two true diversity receivers, 19” 1 U housing
Integral antenna splitter, 2 x 1 : 2
LC display for frequency, RF and AF level
Two separate headphone outputs
Delivery includes: 1 EM 3032 receiver, 2 telescopic antennas
1 mains cable, 19” rack mount ears
EM 3031/EM 3032
RF Wireless Systems | 3000 Series Receivers
EM 3031 and EM 3032
1
2
3
With the EM 3031 single receiver and EM 3032 twin receiver, Sennheiser offers
two 19” high-quality RF receivers which have excellent operational reliability
and are extremely user-friendly. Combined with a suitable hand-held or bodypack
transmitter, they form a studio-quality radio link. Both receivers use true diversity
technology to reduce drop outs to an absolute minimum and ensure interference-
free operation.
Due to the wide switching bandwidth of the EM 3031 and EM 3032 receivers (24 MHz
for the UHF variant, 7 MHz for VHF) and due to their up to 32 receiving frequencies
you can easily switch to unused frequencies in case of interference on a selected
channel. The EM 3031 and EM 3032 receivers have been designed for demanding
show and broadcasting applications and are ideally suited for large multi-channel
systems.
4
5
6
7
8
9
10
1
2
3
4
“FREQUENCY MHz” display
“CHANNEL” display
Alphanumeric main display
10-step level display for incoming RF signal,
with peak warning
10-step level display for incoming AF signal,
with peak warning
With the GA 3030 AM antenna mount, the antenna sockets can be relocated at the
receiver front, for example if the rear of the rack is closed. If you need to choose
an antenna position away from the receivers, Sennheiser offers the A 12 AD UHF
active directional antenna or the A 1031-U passive omni-directional antenna for the
UHF range and the A 2 P passive omni-directional antenna for the VHF range. The
EM 3031 and 3032 receivers output the audio signal via an XLR-3 socket at the
rear. The level control serves to adjust the AF signal level and adapt it to the sub-
sequent mixing console or amplifier.
5
6
6-step display for transmitter battery status,
with “Low Batt” warning
7
8
9
Diversity antenna A active
Squelch active (MUTE)
Diversity antenna B active
The receiver display indicates the chosen receiving frequency or, optionally,
the channel number which it has been assigned. You can also read off the field
strength of the incoming RF signal in µV and the deviation of the audio signal (i.e.
the modulation level of the RF signal) in %. Both RF and AF display have a peak
warning in case the signal strength becomes excessively high. Short peak periods
are not critical. If, however, the audio signal is overmodulated very often and for
quite some time, the sensitivity of the transmitter must be reduced. The AF display
is additionally provided with a “peak-hold” function, i.e. peak values are displayed
for some time so that it becomes easier to detect them.
10 Frequency groups display
Reading off the LC display
EM 3031
EM 3032
1
2
3
4 5
6
1
2
3
4 5
6
1
2
3
4 5
6
1
2
3
1/4” headphone output jack socket
Volume control for headphone output
Multi-function LC display
4
and buttons for selecting the receiving
frequency/channel number
SET button for menu selection and storage
On/off switch
5
6
Operating controls of the EM 3031 and EM 3032 – front panel
EM 3031/EM 3032
RF Wireless Systems | 3000 Series Receivers
436 mm
215 mm
43 mm
EM 3031 / EM 3032 dimensions
Accessories for EM 3031 and EM 3032
GA 3030 AM antenna mount
A 12 AD UHF active directional antenna (for -U)
A 1031-U passive omni-directional antenna (for -U)
A 2 P passive omni-directional antenna (for -V)
GZA 1036-9 ground plane antenna
GZA 1036-TV ground plane antenna (for -U)
N/BNC adaptor
Cat. No. 004368
Cat. No. 004156
Cat. No. 004645
Cat. No. 003533
Cat. No. 002336
Cat. No. 002243
Cat. No. 033839
RG 58 co-axial antenna cable
GZL 1019 A1 (1 m)
GZL 1019 A5 (5 m)
GZL 1019 A10 (10 m)
GZV 1019A BNC coupler
AS-X custom-built active antenna splitter
ASA 3000-EU active antenna splitter
ASA 3000-UK
Cat. No. 002324
Cat. No. 002325
Cat. No. 002326
Cat. No. 002368
on request
Cat. No. 009423
Cat. No. 008408
Cat. No. 009407
ASA 3000-US
|