1x4 HDMI Splitter with
3D and 4Kx2K
Quick Installation Guide
Introduction
The 1x4 HDMI Splitter with 3D and 4Kx2K
broadcasts HDMI signals from one source to four
HDMI displays.
Key Features and Benefits
•
Broadcasts HDMI signals up to 4Kx2K
resolution to four displays simultaneously
HDMI and HDCP compliant
Supports HDMI Deep Color & full 3D
Wide frequency range: 25MHz~340MHz
Video bandwidth: 10.2 Gbps
•
•
•
•
•
Supports 1080p and up to 4Kx2K PC
resolution
•
•
Supports Auto EDID function
Supports input transmission distance up to
5M, and output transmission distance up to
15M
04-0841A
HDMI Out
Figure 2 Rear Panel
•
HDMI Out (1-4): Connects to your HDMI
displays
HardwareInstallation
1.
Power off all devices you plan to connect to
this splitter.
2.
Connect your HDMI source's HDMI out to
the splitter's HDMI Input using an HDMI
cable (HDMI cable not included).
Connect your monitors to the splitter’s
HDMI Outputs using HDMI cables (HDMI
cable not included).
Connect the included power adapter to the
splitter's power jack and plug it into a
reliable power outlet.
3.
4.
3
5.
6.
Power on all of the connected devices.
The splitter is now ready to use.
Application
HDMI source (DVD
player, PS3,etc)
Power input
HDMI cable (up
to 5m)
HDMI cable (up
to 15m)
HDMI display
HDMI display
HDMI display
HDMI display
Figure 3 Application
4
Blank Page
5
Blank Page
6
TechnicalSupportandWarranty
QUESTIONS? SIIG’ s Online Support has answers! Simply visit our web site at
new drivers and solutions. Answers to your questions could be just a few clicks away.
You can also submit questions online and a technical support analyst will promptly
respond.
SIIG offers a 3-year manufacturer warranty with this product. This warranty covers the
original purchaser and guarantees the product to be free of any defects in materials or
workmanship for three (3) years from the date of purchase of the product.
SIIG will, at our discretion, repair or replace (with an identical product or product
having similar features and functionality) the product if defective in materials or
workmanship. This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state. Please see our web site for more warranty details.
If you encounter any problems with this product, please follow the procedures below.
A) If it is within the store's return policy period, please return the product to the store
where you purchased from.
B) If your purchase has passed the store's return policy period, please follow the steps
below to have the product repaired or replaced.
Step 1: Submit your RMA request.
to submit a request to SIIG RMA or fax a request to 510-657-5962. Your RMA request
will be processed, if the product is determined to be defective, an RMA number will
be issued.
Step 2: After obtaining an RMA number, ship the product.
•
Properly pack the product for shipping. All accessories that came with the
original package must be included.
•
Clearly write your RMA number on the top of the returned package. SIIG will
refuse to accept any shipping package, and will not be responsible for a product
returned without an RMA number posted on the outside of the shipping
carton.
•
•
You are responsible for the cost of shipping to SIIG. Ship the product to the
followingaddress:
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
RMA #:
SIIG will ship the repaired or replaced product via Ground in the U.S. and
International Economy outside of the U.S. at no cost to the customer.
7
About SIIG, Inc.
Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity
solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB,
and legacy I/O adapters) that bridge the connection between Desktop/
Notebooksystemsandexternalperipherals. SIIGcontinuestogrowbyadding
A/V and Digital Signage connectivity solutions to our extensive portfolio.
SIIGproductsoffercomprehensiveusermanuals,manyuser-friendlyfeatures,
andarebackedbyanextensivemanufacturerwarranty. Highqualitycontrol
standards are evident by the overall ease of installation and compatibility of
ourproducts,aswellasoneofthelowestdefectivereturnratesintheindustry.
SIIG products can be found in computer retail stores, mail order catalogs,
throughmajordistributors,systemintegrators,andVARsintheAmericasand
theUK, andthroughe-commercesites.
PRODUCT NAME
1x4 HDMI Splitter with 3D and 4Kx2K
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B
OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
Phone: 510-657-8688
1x4 HDMI Splitter with 3D and 4Kx2K is a trademark of SIIG, Inc. SIIG and the SIIG logo
are registered trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of
Microsoft Corporation. All other names used in this publication are for identification only
and may be trademarks of their respective owners.
November, 2012
Copyright © 2012 by SIIG, Inc. All rights reserved.
|